Commit 594bde68 authored by John Crispin's avatar John Crispin Committed by Ralf Baechle

MIPS: ralink: adds support for MT7620 SoC family

Add support code for mt7620 SOC.

The code detects the SoC and registers the clk / pinmux settings.
Signed-off-by: default avatarJohn Crispin <blogic@openwrt.org>
Acked-by: default avatarGabor Juhos <juhosg@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/5177/
parent 293840b9
/*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*
* Parts of this file are based on Ralink's 2.6.21 BSP
*
* Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
* Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
* Copyright (C) 2013 John Crispin <blogic@openwrt.org>
*/
#ifndef _MT7620_REGS_H_
#define _MT7620_REGS_H_
#define MT7620_SYSC_BASE 0x10000000
#define SYSC_REG_CHIP_NAME0 0x00
#define SYSC_REG_CHIP_NAME1 0x04
#define SYSC_REG_CHIP_REV 0x0c
#define SYSC_REG_SYSTEM_CONFIG0 0x10
#define SYSC_REG_SYSTEM_CONFIG1 0x14
#define SYSC_REG_CPLL_CONFIG0 0x54
#define SYSC_REG_CPLL_CONFIG1 0x58
#define MT7620N_CHIP_NAME0 0x33365452
#define MT7620N_CHIP_NAME1 0x20203235
#define MT7620A_CHIP_NAME0 0x3637544d
#define MT7620A_CHIP_NAME1 0x20203032
#define CHIP_REV_PKG_MASK 0x1
#define CHIP_REV_PKG_SHIFT 16
#define CHIP_REV_VER_MASK 0xf
#define CHIP_REV_VER_SHIFT 8
#define CHIP_REV_ECO_MASK 0xf
#define CPLL_SW_CONFIG_SHIFT 31
#define CPLL_SW_CONFIG_MASK 0x1
#define CPLL_CPU_CLK_SHIFT 24
#define CPLL_CPU_CLK_MASK 0x1
#define CPLL_MULT_RATIO_SHIFT 16
#define CPLL_MULT_RATIO 0x7
#define CPLL_DIV_RATIO_SHIFT 10
#define CPLL_DIV_RATIO 0x3
#define SYSCFG0_DRAM_TYPE_MASK 0x3
#define SYSCFG0_DRAM_TYPE_SHIFT 4
#define SYSCFG0_DRAM_TYPE_SDRAM 0
#define SYSCFG0_DRAM_TYPE_DDR1 1
#define SYSCFG0_DRAM_TYPE_DDR2 2
#define MT7620_GPIO_MODE_I2C BIT(0)
#define MT7620_GPIO_MODE_UART0_SHIFT 2
#define MT7620_GPIO_MODE_UART0_MASK 0x7
#define MT7620_GPIO_MODE_UART0(x) ((x) << MT7620_GPIO_MODE_UART0_SHIFT)
#define MT7620_GPIO_MODE_UARTF 0x0
#define MT7620_GPIO_MODE_PCM_UARTF 0x1
#define MT7620_GPIO_MODE_PCM_I2S 0x2
#define MT7620_GPIO_MODE_I2S_UARTF 0x3
#define MT7620_GPIO_MODE_PCM_GPIO 0x4
#define MT7620_GPIO_MODE_GPIO_UARTF 0x5
#define MT7620_GPIO_MODE_GPIO_I2S 0x6
#define MT7620_GPIO_MODE_GPIO 0x7
#define MT7620_GPIO_MODE_UART1 BIT(5)
#define MT7620_GPIO_MODE_MDIO BIT(8)
#define MT7620_GPIO_MODE_RGMII1 BIT(9)
#define MT7620_GPIO_MODE_RGMII2 BIT(10)
#define MT7620_GPIO_MODE_SPI BIT(11)
#define MT7620_GPIO_MODE_SPI_REF_CLK BIT(12)
#define MT7620_GPIO_MODE_WLED BIT(13)
#define MT7620_GPIO_MODE_JTAG BIT(15)
#define MT7620_GPIO_MODE_EPHY BIT(15)
#define MT7620_GPIO_MODE_WDT BIT(22)
#endif
......@@ -20,6 +20,9 @@ choice
select USB_ARCH_HAS_OHCI
select USB_ARCH_HAS_EHCI
config SOC_MT7620
bool "MT7620"
endchoice
choice
......
......@@ -11,6 +11,7 @@ obj-y := prom.o of.o reset.o clk.o irq.o
obj-$(CONFIG_SOC_RT288X) += rt288x.o
obj-$(CONFIG_SOC_RT305X) += rt305x.o
obj-$(CONFIG_SOC_RT3883) += rt3883.o
obj-$(CONFIG_SOC_MT7620) += mt7620.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
......
......@@ -18,3 +18,8 @@ load-$(CONFIG_SOC_RT305X) += 0xffffffff80000000
# Ralink RT3883
#
load-$(CONFIG_SOC_RT3883) += 0xffffffff80000000
#
# Ralink MT7620
#
load-$(CONFIG_SOC_MT7620) += 0xffffffff80000000
/*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*
* Parts of this file are based on Ralink's 2.6.21 BSP
*
* Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
* Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
* Copyright (C) 2013 John Crispin <blogic@openwrt.org>
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/module.h>
#include <asm/mipsregs.h>
#include <asm/mach-ralink/ralink_regs.h>
#include <asm/mach-ralink/mt7620.h>
#include "common.h"
/* does the board have sdram or ddram */
static int dram_type;
/* the pll dividers */
static u32 mt7620_clk_divider[] = { 2, 3, 4, 8 };
static struct ralink_pinmux_grp mode_mux[] = {
{
.name = "i2c",
.mask = MT7620_GPIO_MODE_I2C,
.gpio_first = 1,
.gpio_last = 2,
}, {
.name = "spi",
.mask = MT7620_GPIO_MODE_SPI,
.gpio_first = 3,
.gpio_last = 6,
}, {
.name = "uartlite",
.mask = MT7620_GPIO_MODE_UART1,
.gpio_first = 15,
.gpio_last = 16,
}, {
.name = "wdt",
.mask = MT7620_GPIO_MODE_WDT,
.gpio_first = 17,
.gpio_last = 17,
}, {
.name = "mdio",
.mask = MT7620_GPIO_MODE_MDIO,
.gpio_first = 22,
.gpio_last = 23,
}, {
.name = "rgmii1",
.mask = MT7620_GPIO_MODE_RGMII1,
.gpio_first = 24,
.gpio_last = 35,
}, {
.name = "spi refclk",
.mask = MT7620_GPIO_MODE_SPI_REF_CLK,
.gpio_first = 37,
.gpio_last = 39,
}, {
.name = "jtag",
.mask = MT7620_GPIO_MODE_JTAG,
.gpio_first = 40,
.gpio_last = 44,
}, {
/* shared lines with jtag */
.name = "ephy",
.mask = MT7620_GPIO_MODE_EPHY,
.gpio_first = 40,
.gpio_last = 44,
}, {
.name = "nand",
.mask = MT7620_GPIO_MODE_JTAG,
.gpio_first = 45,
.gpio_last = 59,
}, {
.name = "rgmii2",
.mask = MT7620_GPIO_MODE_RGMII2,
.gpio_first = 60,
.gpio_last = 71,
}, {
.name = "wled",
.mask = MT7620_GPIO_MODE_WLED,
.gpio_first = 72,
.gpio_last = 72,
}, {0}
};
static struct ralink_pinmux_grp uart_mux[] = {
{
.name = "uartf",
.mask = MT7620_GPIO_MODE_UARTF,
.gpio_first = 7,
.gpio_last = 14,
}, {
.name = "pcm uartf",
.mask = MT7620_GPIO_MODE_PCM_UARTF,
.gpio_first = 7,
.gpio_last = 14,
}, {
.name = "pcm i2s",
.mask = MT7620_GPIO_MODE_PCM_I2S,
.gpio_first = 7,
.gpio_last = 14,
}, {
.name = "i2s uartf",
.mask = MT7620_GPIO_MODE_I2S_UARTF,
.gpio_first = 7,
.gpio_last = 14,
}, {
.name = "pcm gpio",
.mask = MT7620_GPIO_MODE_PCM_GPIO,
.gpio_first = 11,
.gpio_last = 14,
}, {
.name = "gpio uartf",
.mask = MT7620_GPIO_MODE_GPIO_UARTF,
.gpio_first = 7,
.gpio_last = 10,
}, {
.name = "gpio i2s",
.mask = MT7620_GPIO_MODE_GPIO_I2S,
.gpio_first = 7,
.gpio_last = 10,
}, {
.name = "gpio",
.mask = MT7620_GPIO_MODE_GPIO,
}, {0}
};
struct ralink_pinmux rt_gpio_pinmux = {
.mode = mode_mux,
.uart = uart_mux,
.uart_shift = MT7620_GPIO_MODE_UART0_SHIFT,
.uart_mask = MT7620_GPIO_MODE_UART0_MASK,
};
void __init ralink_clk_init(void)
{
unsigned long cpu_rate, sys_rate;
u32 c0 = rt_sysc_r32(SYSC_REG_CPLL_CONFIG0);
u32 c1 = rt_sysc_r32(SYSC_REG_CPLL_CONFIG1);
u32 swconfig = (c0 >> CPLL_SW_CONFIG_SHIFT) & CPLL_SW_CONFIG_MASK;
u32 cpu_clk = (c1 >> CPLL_CPU_CLK_SHIFT) & CPLL_CPU_CLK_MASK;
if (cpu_clk) {
cpu_rate = 480000000;
} else if (!swconfig) {
cpu_rate = 600000000;
} else {
u32 m = (c0 >> CPLL_MULT_RATIO_SHIFT) & CPLL_MULT_RATIO;
u32 d = (c0 >> CPLL_DIV_RATIO_SHIFT) & CPLL_DIV_RATIO;
cpu_rate = ((40 * (m + 24)) / mt7620_clk_divider[d]) * 1000000;
}
if (dram_type == SYSCFG0_DRAM_TYPE_SDRAM)
sys_rate = cpu_rate / 4;
else
sys_rate = cpu_rate / 3;
ralink_clk_add("cpu", cpu_rate);
ralink_clk_add("10000100.timer", 40000000);
ralink_clk_add("10000500.uart", 40000000);
ralink_clk_add("10000c00.uartlite", 40000000);
}
void __init ralink_of_remap(void)
{
rt_sysc_membase = plat_of_remap_node("ralink,mt7620a-sysc");
rt_memc_membase = plat_of_remap_node("ralink,mt7620a-memc");
if (!rt_sysc_membase || !rt_memc_membase)
panic("Failed to remap core resources");
}
void prom_soc_init(struct ralink_soc_info *soc_info)
{
void __iomem *sysc = (void __iomem *) KSEG1ADDR(MT7620_SYSC_BASE);
unsigned char *name = NULL;
u32 n0;
u32 n1;
u32 rev;
u32 cfg0;
n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0);
n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1);
if (n0 == MT7620N_CHIP_NAME0 && n1 == MT7620N_CHIP_NAME1) {
name = "MT7620N";
soc_info->compatible = "ralink,mt7620n-soc";
} else if (n0 == MT7620A_CHIP_NAME0 && n1 == MT7620A_CHIP_NAME1) {
name = "MT7620A";
soc_info->compatible = "ralink,mt7620a-soc";
} else {
panic("mt7620: unknown SoC, n0:%08x n1:%08x\n", n0, n1);
}
rev = __raw_readl(sysc + SYSC_REG_CHIP_REV);
snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
"Ralink %s ver:%u eco:%u",
name,
(rev >> CHIP_REV_VER_SHIFT) & CHIP_REV_VER_MASK,
(rev & CHIP_REV_ECO_MASK));
cfg0 = __raw_readl(sysc + SYSC_REG_SYSTEM_CONFIG0);
dram_type = (cfg0 >> SYSCFG0_DRAM_TYPE_SHIFT) & SYSCFG0_DRAM_TYPE_MASK;
}
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment