Commit 5a3ec1e6 authored by Chris Wilson's avatar Chris Wilson

drm/i915/dvo: Remove incorrect kerneldoc markups

Regular comments where being marked up for kerneldoc, but were not
formatted properly. Remove the markup to remove the warnings.

drivers/gpu/drm/i915/dvo_ivch.c:192: warning: Function parameter or member 'dvo' not described in 'ivch_read'
drivers/gpu/drm/i915/dvo_ivch.c:192: warning: Function parameter or member 'addr' not described in 'ivch_read'
drivers/gpu/drm/i915/dvo_ivch.c:192: warning: Function parameter or member 'data' not described in 'ivch_read'
Signed-off-by: default avatarChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: default avatarJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180214092909.27040-2-chris@chris-wilson.co.uk
parent 53722529
......@@ -59,28 +59,28 @@
* This must not be set while VR01_DVO_BYPASS_ENABLE is set.
*/
# define VR01_LCD_ENABLE (1 << 2)
/** Enables the DVO repeater. */
/* Enables the DVO repeater. */
# define VR01_DVO_BYPASS_ENABLE (1 << 1)
/** Enables the DVO clock */
/* Enables the DVO clock */
# define VR01_DVO_ENABLE (1 << 0)
/** Enable dithering for 18bpp panels. Not documented. */
/* Enable dithering for 18bpp panels. Not documented. */
# define VR01_DITHER_ENABLE (1 << 4)
/*
* LCD Interface Format
*/
#define VR10 0x10
/** Enables LVDS output instead of CMOS */
/* Enables LVDS output instead of CMOS */
# define VR10_LVDS_ENABLE (1 << 4)
/** Enables 18-bit LVDS output. */
/* Enables 18-bit LVDS output. */
# define VR10_INTERFACE_1X18 (0 << 2)
/** Enables 24-bit LVDS or CMOS output */
/* Enables 24-bit LVDS or CMOS output */
# define VR10_INTERFACE_1X24 (1 << 2)
/** Enables 2x18-bit LVDS or CMOS output. */
/* Enables 2x18-bit LVDS or CMOS output. */
# define VR10_INTERFACE_2X18 (2 << 2)
/** Enables 2x24-bit LVDS output */
/* Enables 2x24-bit LVDS output */
# define VR10_INTERFACE_2X24 (3 << 2)
/** Mask that defines the depth of the pipeline */
/* Mask that defines the depth of the pipeline */
# define VR10_INTERFACE_DEPTH_MASK (3 << 2)
/*
......@@ -97,7 +97,7 @@
* Panel power down status
*/
#define VR30 0x30
/** Read only bit indicating that the panel is not in a safe poweroff state. */
/* Read only bit indicating that the panel is not in a safe poweroff state. */
# define VR30_PANEL_ON (1 << 15)
#define VR40 0x40
......@@ -183,7 +183,7 @@ struct ivch_priv {
static void ivch_dump_regs(struct intel_dvo_device *dvo);
/**
/*
* Reads a register on the ivch.
*
* Each of the 256 registers are 16 bits long.
......@@ -230,7 +230,7 @@ static bool ivch_read(struct intel_dvo_device *dvo, int addr, uint16_t *data)
return false;
}
/** Writes a 16-bit register on the ivch */
/* Writes a 16-bit register on the ivch */
static bool ivch_write(struct intel_dvo_device *dvo, int addr, uint16_t data)
{
struct ivch_priv *priv = dvo->dev_priv;
......@@ -258,7 +258,7 @@ static bool ivch_write(struct intel_dvo_device *dvo, int addr, uint16_t data)
return false;
}
/** Probes the given bus and slave address for an ivch */
/* Probes the given bus and slave address for an ivch */
static bool ivch_init(struct intel_dvo_device *dvo,
struct i2c_adapter *adapter)
{
......@@ -338,7 +338,7 @@ static void ivch_reset(struct intel_dvo_device *dvo)
ivch_write(dvo, backup_addresses[i], priv->reg_backup[i]);
}
/** Sets the power state of the panel connected to the ivch */
/* Sets the power state of the panel connected to the ivch */
static void ivch_dpms(struct intel_dvo_device *dvo, bool enable)
{
int i;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment