PM / devfreq: Add dynamic scaling for imx8m ddr controller

Add driver for dynamic scaling the DDR Controller on imx8m chips. Actual
frequency switching is implemented inside TF-A, this driver wraps the
SMC calls and synchronizes the clk tree.

The DRAM clocks on imx8m have the following structure (abridged):

 +----------+       |\            +------+
 | dram_pll |-------|M| dram_core |      |
 +----------+       |U|---------->| D    |
                 /--|X|           |  D   |
   dram_alt_root |  |/            |   R  |
                 |                |    C |
            +---------+           |      |
            |FIX DIV/4|           |      |
            +---------+           |      |
  composite:     |                |      |
 +----------+    |                |      |
 | dram_alt |----/                |      |
 +----------+                     |      |
 | dram_apb |-------------------->|      |
 +----------+                     +------+

The dram_pll is used for higher rates and dram_alt is used for lower
rates. The dram_alt and dram_apb clocks are "imx composite" and their
parent can also be modified.

This driver will prepare/enable the new parents ahead of switching (so
that the expected roots are enabled) and afterwards it will call
clk_set_parent to ensure the parents in clock framework are up-to-date.

The driver relies on dram_pll dram_alt and dram_apb being marked with
CLK_GET_RATE_NOCACHE for rate updates.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
[cw00.choi: Edit the COMPILE_TEST module dependency in Kconfig]
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>

drivers/devfreq/Kconfig

@@ -91,6 +91,16 @@ config ARM_EXYNOS_BUS_DEVFREQ
 	  and adjusts the operating frequencies and voltages with OPP support.
 	  This does not yet operate with optimal voltages.
 
+config ARM_IMX8M_DDRC_DEVFREQ
+	tristate "i.MX8M DDRC DEVFREQ Driver"
+	depends on (ARCH_MXC && HAVE_ARM_SMCCC) || \
+		(COMPILE_TEST && HAVE_ARM_SMCCC)
+	select DEVFREQ_GOV_SIMPLE_ONDEMAND
+	select DEVFREQ_GOV_USERSPACE
+	help
+	  This adds the DEVFREQ driver for the i.MX8M DDR Controller. It allows
+	  adjusting DRAM frequency.
+
 config ARM_TEGRA_DEVFREQ
 	tristate "NVIDIA Tegra30/114/124/210 DEVFREQ Driver"
 	depends on ARCH_TEGRA_3x_SOC || ARCH_TEGRA_114_SOC || \

drivers/devfreq/Makefile

@@ -9,6 +9,7 @@ obj-$(CONFIG_DEVFREQ_GOV_PASSIVE)	+= governor_passive.o
 
 # DEVFREQ Drivers
 obj-$(CONFIG_ARM_EXYNOS_BUS_DEVFREQ)	+= exynos-bus.o
+obj-$(CONFIG_ARM_IMX8M_DDRC_DEVFREQ)	+= imx8m-ddrc.o
 obj-$(CONFIG_ARM_RK3399_DMC_DEVFREQ)	+= rk3399_dmc.o
 obj-$(CONFIG_ARM_TEGRA_DEVFREQ)		+= tegra30-devfreq.o
 obj-$(CONFIG_ARM_TEGRA20_DEVFREQ)	+= tegra20-devfreq.o