Staging: rtl8192su: remove USB_TX_DRIVER_AGGREGATION_ENABLE ifdefs

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/staging/rtl8192su/Makefile

@@ -12,7 +12,6 @@ EXTRA_CFLAGS += -DRTL8190_Download_Firmware_From_Header=1
 EXTRA_CFLAGS += -DRTL8192S_PREPARE_FOR_NORMAL_RELEASE
 EXTRA_CFLAGS += -DRTL8192SU_DISABLE_IQK=1
 
-#EXTRA_CFLAGS += -DUSB_TX_DRIVER_AGGREGATION_ENABLE=0
 #EXTRA_CFLAGS += -DRTL8192SU_DISABLE_CCK_RATE=0
 EXTRA_CFLAGS += -DRTL8192S_DISABLE_FW_DM=0
 EXTRA_CFLAGS += -DDISABLE_BB_RF=0

drivers/staging/rtl8192su/ieee80211/ieee80211_softmac.c

@@ -2237,11 +2237,7 @@ void ieee80211_softmac_xmit(struct ieee80211_txb *txb, struct ieee80211_device *
 #if 1
 	/* if xmit available, just xmit it immediately, else just insert it to the wait queue */
 	for(i = 0; i < txb->nr_frags; i++) {
-#ifdef USB_TX_DRIVER_AGGREGATION_ENABLE
-		if ((skb_queue_len(&ieee->skb_drv_aggQ[queue_index]) != 0) ||
-#else
 		if ((skb_queue_len(&ieee->skb_waitQ[queue_index]) != 0) ||
-#endif
 		(!ieee->check_nic_enough_desc(ieee->dev,queue_index))||\
 		     (ieee->queue_stop)) {
 			/* insert the skb packet to the wait queue */
@@ -2250,11 +2246,7 @@ void ieee80211_softmac_xmit(struct ieee80211_txb *txb, struct ieee80211_device *
 			 * */
 			//printk("error:no descriptor left@queue_index %d, %d, %d\n", queue_index, skb_queue_len(&ieee->skb_waitQ[queue_index]), ieee->check_nic_enough_desc(ieee->dev,queue_index));
 			//ieee80211_stop_queue(ieee);
-#ifdef USB_TX_DRIVER_AGGREGATION_ENABLE
-			skb_queue_tail(&ieee->skb_drv_aggQ[queue_index], txb->fragments[i]);
-#else
 			skb_queue_tail(&ieee->skb_waitQ[queue_index], txb->fragments[i]);
-#endif
 		}else{
 			ieee->softmac_data_hard_start_xmit(
 					txb->fragments[i],

drivers/staging/rtl8192su/ieee80211/rtl819x_HT.h

@@ -324,9 +324,6 @@ typedef struct _RT_HIGH_THROUGHPUT{
 	u8				RxReorderPendingTime;
 	u16				RxReorderDropCounter;
 
-#ifdef USB_TX_DRIVER_AGGREGATION_ENABLE
-	u8				UsbTxAggrNum;
-#endif
 
 	// Add for Broadcom(Linksys) IOT. Joseph
 	u8				bIsPeerBcm;

drivers/staging/rtl8192su/ieee80211/rtl819x_HTProc.c

@@ -102,9 +102,6 @@ void HTUpdateDefaultSetting(struct ieee80211_device* ieee)
 	pHTInfo->RxReorderWinSize = 64;
 	pHTInfo->RxReorderPendingTime = 30;
 
-#ifdef USB_TX_DRIVER_AGGREGATION_ENABLE
-	pHTInfo->UsbTxAggrNum = 4;
-#endif
 
 
 }

drivers/staging/rtl8192su/r8192U.h

@@ -465,30 +465,6 @@ typedef struct _tx_desc_819x_usb {
 }tx_desc_819x_usb, *ptx_desc_819x_usb;
 #endif
 
-#ifdef USB_TX_DRIVER_AGGREGATION_ENABLE
-typedef struct _tx_desc_819x_usb_aggr_subframe {
-	//DWORD 0
-	u16	PktSize;
-	u8	Offset;
-	u8	TxFWInfoSize;
-
-	//DWORD 1
-	u8	RATid:3;
-	u8	DISFB:1;
-	u8	USERATE:1;
-	u8	MOREFRAG:1;
-	u8	NoEnc:1;
-	u8	PIFS:1;
-	u8	QueueSelect:5;
-	u8	NoACM:1;
-	u8	Reserved1:2;
-	u8	SecCAMID:5;
-	u8	SecDescAssign:1;
-	u8	SecType:2;
-	u8	PacketID:7;
-	u8	OWN:1;
-}tx_desc_819x_usb_aggr_subframe, *ptx_desc_819x_usb_aggr_subframe;
-#endif
 
 
 #ifdef RTL8192SU
@@ -868,17 +844,10 @@ typedef struct rx_drvinfo_819x_usb{
 //#define TX_PACKET_SHIFT_BYTES 	  	(USB_HWDESC_HEADER_LEN + sizeof(tx_fwinfo_819x_usb))
 #define MAX_FRAGMENT_COUNT		8
 #ifdef RTL8192U
-#ifdef USB_TX_DRIVER_AGGREGATION_ENABLE
-#define MAX_TRANSMIT_BUFFER_SIZE			32000
-#else
 #define MAX_TRANSMIT_BUFFER_SIZE			8000
-#endif
 #else
 #define MAX_TRANSMIT_BUFFER_SIZE  	(1600+(MAX_802_11_HEADER_LENGTH+ENCRYPTION_MAX_OVERHEAD)*MAX_FRAGMENT_COUNT)
 #endif
-#ifdef USB_TX_DRIVER_AGGREGATION_ENABLE
-#define TX_PACKET_DRVAGGR_SUBFRAME_SHIFT_BYTES (sizeof(tx_desc_819x_usb_aggr_subframe) + sizeof(tx_fwinfo_819x_usb))
-#endif
 #define scrclng					4		// octets for crc32 (FCS, ICV)
 
 typedef enum rf_optype

drivers/staging/rtl8192su/r819xU_HTType.h

@@ -293,9 +293,6 @@ typedef struct _RT_HIGH_THROUGHPUT{
 	u8				RxReorderPendingTime;
 	u16				RxReorderDropCounter;
 
-#ifdef USB_TX_DRIVER_AGGREGATION_ENABLE
-	u8				UsbTxAggrNum;
-#endif
 
 	// Add for Broadcom(Linksys) IOT. Joseph
 	u8				bIsPeerBcm;