mtip32xx: Print exact time when an internal command is interrupted

Print exact time when an internal command is interrupted.
Signed-off-by: Selvan Mani <smani@micron.com>
Signed-off-by: Rajesh Kumar Sambandam <rsambandam@micron.com>
Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@fb.com>

drivers/block/mtip32xx/mtip32xx.c

@@ -1092,6 +1092,7 @@ static int mtip_exec_internal_command(struct mtip_port *port,
 	struct mtip_cmd *int_cmd;
 	struct driver_data *dd = port->dd;
 	int rv = 0;
+	unsigned long start;
 
 	/* Make sure the buffer is 8 byte aligned. This is asic specific. */
 	if (buffer & 0x00000007) {
@@ -1155,6 +1156,8 @@ static int mtip_exec_internal_command(struct mtip_port *port,
 	/* Populate the command header */
 	int_cmd->command_header->byte_count = 0;
 
+	start = jiffies;
+
 	/* Issue the command to the hardware */
 	mtip_issue_non_ncq_command(port, MTIP_TAG_INTERNAL);
 
@@ -1165,8 +1168,9 @@ static int mtip_exec_internal_command(struct mtip_port *port,
 				msecs_to_jiffies(timeout))) <= 0) {
 			if (rv == -ERESTARTSYS) { /* interrupted */
 				dev_err(&dd->pdev->dev,
-					"Internal command [%02X] was interrupted after %lu ms\n",
-					fis->command, timeout);
+					"Internal command [%02X] was interrupted after %u ms\n",
+					fis->command,
+					jiffies_to_msecs(jiffies - start));
 				rv = -EINTR;
 				goto exec_ic_exit;
 			} else if (rv == 0) /* timeout */