Skip to content

L
linux
Commit 5c1992f8 authored by Kumar Gala's avatar Kumar Gala Committed by Paul Mackerras
Browse files
Options

[POWERPC] Removed hardcoded phandles from dts 

Remove explicit phandles and move to using references that autogenerate the
phandles when needed.
Signed-off-by: default avatarKumar Gala <galak@kernel.crashing.org>
parent c0fabf75
Hide whitespace changes
Inline Side-by-side
Showing with 139 additions and 168 deletions
arch/powerpc/boot/dts/kuroboxHD.dts
View file @ 5c1992f8
......@@ -21,19 +21,16 @@ build with: "dtc -f -I dts -O dtb -o kuroboxHD.dtb -V 16 kuroboxHD.dts"
*/
/ {
linux,phandle = <1000>;
model = "KuroboxHD";
compatible = "linkstation";
#address-cells = <1>;
#size-cells = <1>;
cpus {
linux,phandle = <2000>;
#address-cells = <1>;
#size-cells = <0>;
PowerPC,603e { /* Really 8241 */
linux,phandle = <2100>;
device_type = "cpu";
reg = <0>;
clock-frequency = <bebc200>; /* Fixed by bootwrapper */
......@@ -48,13 +45,11 @@ PowerPC,603e { /* Really 8241 */
};
memory {
linux,phandle = <3000>;
device_type = "memory";
reg = <00000000 04000000>;
};
soc10x { /* AFAICT need to make soc for 8245's uarts to be defined */
linux,phandle = <4000>;
#address-cells = <1>;
#size-cells = <1>;
#interrupt-cells = <2>;
......@@ -69,38 +64,34 @@ fec00000 fec00000 00300000 /* pci cfg regs */
fef00000 fef00000 00100000>; /* pci iack */
i2c@80003000 {
linux,phandle = <4300>;
device_type = "i2c";
compatible = "fsl-i2c";
reg = <80003000 1000>;
interrupts = <5 2>;
interrupt-parent = <4400>;
interrupt-parent = <&mpic>;
};
serial@80004500 {
linux,phandle = <4511>;
device_type = "serial";
compatible = "ns16550";
reg = <80004500 8>;
clock-frequency = <5d08d88>;
current-speed = <2580>;
interrupts = <9 2>;
interrupt-parent = <4400>;
interrupt-parent = <&mpic>;
};
serial@80004600 {
linux,phandle = <4512>;
device_type = "serial";
compatible = "ns16550";
reg = <80004600 8>;
clock-frequency = <5d08d88>;
current-speed = <e100>;
interrupts = <a 0>;
interrupt-parent = <4400>;
interrupt-parent = <&mpic>;
};
pic@80040000 {
linux,phandle = <4400>;
mpic: pic@80040000 {
#interrupt-cells = <2>;
#address-cells = <0>;
device_type = "open-pic";
......@@ -111,7 +102,6 @@ pic@80040000 {
};
pci@fec00000 {
linux,phandle = <4500>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
......@@ -122,24 +112,24 @@ pci@fec00000 {
02000000 0 80000000 80000000 0 70000000>;
bus-range = <0 ff>;
clock-frequency = <7f28155>;
interrupt-parent = <4400>;
interrupt-parent = <&mpic>;
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 11 - IRQ0 ETH */
5800 0 0 1 4400 0 1
5800 0 0 2 4400 1 1
5800 0 0 3 4400 2 1
5800 0 0 4 4400 3 1
5800 0 0 1 &mpic 0 1
5800 0 0 2 &mpic 1 1
5800 0 0 3 &mpic 2 1
5800 0 0 4 &mpic 3 1
/* IDSEL 12 - IRQ1 IDE0 */
6000 0 0 1 4400 1 1
6000 0 0 2 4400 2 1
6000 0 0 3 4400 3 1
6000 0 0 4 4400 0 1
6000 0 0 1 &mpic 1 1
6000 0 0 2 &mpic 2 1
6000 0 0 3 &mpic 3 1
6000 0 0 4 &mpic 0 1
/* IDSEL 14 - IRQ3 USB2.0 */
7000 0 0 1 4400 3 1
7000 0 0 2 4400 3 1
7000 0 0 3 4400 3 1
7000 0 0 4 4400 3 1
7000 0 0 1 &mpic 3 1
7000 0 0 2 &mpic 3 1
7000 0 0 3 &mpic 3 1
7000 0 0 4 &mpic 3 1
>;
};
};
......
arch/powerpc/boot/dts/kuroboxHG.dts
View file @ 5c1992f8
......@@ -21,19 +21,16 @@ build with: "dtc -f -I dts -O dtb -o kuroboxHG.dtb -V 16 kuroboxHG.dts"
*/
/ {
linux,phandle = <1000>;
model = "KuroboxHG";
compatible = "linkstation";
#address-cells = <1>;
#size-cells = <1>;
cpus {
linux,phandle = <2000>;
#address-cells = <1>;
#size-cells = <0>;
PowerPC,603e { /* Really 8241 */
linux,phandle = <2100>;
device_type = "cpu";
reg = <0>;
clock-frequency = <fdad680>; /* Fixed by bootwrapper */
......@@ -48,13 +45,11 @@ PowerPC,603e { /* Really 8241 */
};
memory {
linux,phandle = <3000>;
device_type = "memory";
reg = <00000000 08000000>;
};
soc10x { /* AFAICT need to make soc for 8245's uarts to be defined */
linux,phandle = <4000>;
#address-cells = <1>;
#size-cells = <1>;
#interrupt-cells = <2>;
......@@ -69,38 +64,35 @@ fec00000 fec00000 00300000 /* pci cfg regs */
fef00000 fef00000 00100000>; /* pci iack */
i2c@80003000 {
linux,phandle = <4300>;
device_type = "i2c";
compatible = "fsl-i2c";
reg = <80003000 1000>;
interrupts = <5 2>;
interrupt-parent = <4400>;
interrupt-parent = <&mpic>;
};
serial@80004500 {
linux,phandle = <4511>;
device_type = "serial";
compatible = "ns16550";
reg = <80004500 8>;
clock-frequency = <7c044a8>;
current-speed = <2580>;
interrupts = <9 2>;
interrupt-parent = <4400>;
interrupt-parent = <&mpic>;
};
serial@80004600 {
linux,phandle = <4512>;
device_type = "serial";
compatible = "ns16550";
reg = <80004600 8>;
clock-frequency = <7c044a8>;
current-speed = <e100>;
interrupts = <a 0>;
interrupt-parent = <4400>;
interrupt-parent = <&mpic>;
};
pic@80040000 {
linux,phandle = <4400>;
mpic: pic@80040000 {
interrupt-parent = <&mpic>;
#interrupt-cells = <2>;
#address-cells = <0>;
device_type = "open-pic";
......@@ -111,7 +103,6 @@ pic@80040000 {
};
pci@fec00000 {
linux,phandle = <4500>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
......@@ -122,24 +113,24 @@ pci@fec00000 {
02000000 0 80000000 80000000 0 70000000>;
bus-range = <0 ff>;
clock-frequency = <7f28155>;
interrupt-parent = <4400>;
interrupt-parent = <&mpic>;
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 11 - IRQ0 ETH */
5800 0 0 1 4400 0 1
5800 0 0 2 4400 1 1
5800 0 0 3 4400 2 1
5800 0 0 4 4400 3 1
5800 0 0 1 &mpic 0 1
5800 0 0 2 &mpic 1 1
5800 0 0 3 &mpic 2 1
5800 0 0 4 &mpic 3 1
/* IDSEL 12 - IRQ1 IDE0 */
6000 0 0 1 4400 1 1
6000 0 0 2 4400 2 1
6000 0 0 3 4400 3 1
6000 0 0 4 4400 0 1
6000 0 0 1 &mpic 1 1
6000 0 0 2 &mpic 2 1
6000 0 0 3 &mpic 3 1
6000 0 0 4 &mpic 0 1
/* IDSEL 14 - IRQ3 USB2.0 */
7000 0 0 1 4400 3 1
7000 0 0 2 4400 3 1
7000 0 0 3 4400 3 1
7000 0 0 4 4400 3 1
7000 0 0 1 &mpic 3 1
7000 0 0 2 &mpic 3 1
7000 0 0 3 &mpic 3 1
7000 0 0 4 &mpic 3 1
>;
};
};
......
arch/powerpc/boot/dts/lite5200.dts
View file @ 5c1992f8
......@@ -49,7 +49,7 @@ memory {
soc5200@f0000000 {
model = "fsl,mpc5200";
compatible = "mpc5200";
revision = "" // from bootloader
revision = ""; // from bootloader
#interrupt-cells = <3>;
device_type = "soc";
ranges = <0 f0000000 f0010000>;
......@@ -62,13 +62,12 @@ cdm@200 {
reg = <200 38>;
};
pic@500 {
mpc5200_pic: pic@500 {
// 5200 interrupts are encoded into two levels;
linux,phandle = <500>;
interrupt-controller;
#interrupt-cells = <3>;
device_type = "interrupt-controller";
compatible = "mpc5200-pic";
compatible = "mpc5200_pic";
reg = <500 80>;
built-in;
};
......@@ -79,7 +78,7 @@ gpt@600 { // General Purpose Timer
cell-index = <0>;
reg = <600 10>;
interrupts = <1 9 0>;
interrupt-parent = <500>;
interrupt-parent = <&mpc5200_pic>;
has-wdt;
};
......@@ -89,7 +88,7 @@ gpt@610 { // General Purpose Timer
cell-index = <1>;
reg = <610 10>;
interrupts = <1 a 0>;
interrupt-parent = <500>;
interrupt-parent = <&mpc5200_pic>;
};
gpt@620 { // General Purpose Timer
......@@ -98,7 +97,7 @@ gpt@620 { // General Purpose Timer
cell-index = <2>;
reg = <620 10>;
interrupts = <1 b 0>;
interrupt-parent = <500>;
interrupt-parent = <&mpc5200_pic>;
};
gpt@630 { // General Purpose Timer
......@@ -107,7 +106,7 @@ gpt@630 { // General Purpose Timer
cell-index = <3>;
reg = <630 10>;
interrupts = <1 c 0>;
interrupt-parent = <500>;
interrupt-parent = <&mpc5200_pic>;
};
gpt@640 { // General Purpose Timer
......@@ -116,7 +115,7 @@ gpt@640 { // General Purpose Timer
cell-index = <4>;
reg = <640 10>;
interrupts = <1 d 0>;
interrupt-parent = <500>;
interrupt-parent = <&mpc5200_pic>;
};
gpt@650 { // General Purpose Timer
......@@ -125,7 +124,7 @@ gpt@650 { // General Purpose Timer
cell-index = <5>;
reg = <650 10>;
interrupts = <1 e 0>;
interrupt-parent = <500>;
interrupt-parent = <&mpc5200_pic>;
};
gpt@660 { // General Purpose Timer
......@@ -134,7 +133,7 @@ gpt@660 { // General Purpose Timer
cell-index = <6>;
reg = <660 10>;
interrupts = <1 f 0>;
interrupt-parent = <500>;
interrupt-parent = <&mpc5200_pic>;
};
gpt@670 { // General Purpose Timer
......@@ -143,7 +142,7 @@ gpt@670 { // General Purpose Timer
cell-index = <7>;
reg = <670 10>;
interrupts = <1 10 0>;
interrupt-parent = <500>;
interrupt-parent = <&mpc5200_pic>;
};
rtc@800 { // Real time clock
......@@ -151,7 +150,7 @@ rtc@800 { // Real time clock
device_type = "rtc";
reg = <800 100>;
interrupts = <1 5 0 1 6 0>;
interrupt-parent = <500>;
interrupt-parent = <&mpc5200_pic>;
};
mscan@900 {
......@@ -159,7 +158,7 @@ mscan@900 {
compatible = "mpc5200-mscan";
cell-index = <0>;
interrupts = <2 11 0>;
interrupt-parent = <500>;
interrupt-parent = <&mpc5200_pic>;
reg = <900 80>;
};
......@@ -168,7 +167,7 @@ mscan@980 {
compatible = "mpc5200-mscan";
cell-index = <1>;
interrupts = <2 12 0>;
interrupt-parent = <500>;
interrupt-parent = <&mpc5200_pic>;
reg = <980 80>;
};
......@@ -176,14 +175,14 @@ gpio@b00 {
compatible = "mpc5200-gpio";
reg = <b00 40>;
interrupts = <1 7 0>;
interrupt-parent = <500>;
interrupt-parent = <&mpc5200_pic>;
};
gpio-wkup@c00 {
compatible = "mpc5200-gpio-wkup";
reg = <c00 40>;
interrupts = <1 8 0 0 3 0>;
interrupt-parent = <500>;
interrupt-parent = <&mpc5200_pic>;
};
pci@0d00 {
......@@ -194,13 +193,13 @@ pci@0d00 {
compatible = "mpc5200-pci";
reg = <d00 100>;
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <c000 0 0 1 500 0 0 3
c000 0 0 2 500 0 0 3
c000 0 0 3 500 0 0 3
c000 0 0 4 500 0 0 3>;
interrupt-map = <c000 0 0 1 &mpc5200_pic 0 0 3
c000 0 0 2 &mpc5200_pic 0 0 3
c000 0 0 3 &mpc5200_pic 0 0 3
c000 0 0 4 &mpc5200_pic 0 0 3>;
clock-frequency = <0>; // From boot loader
interrupts = <2 8 0 2 9 0 2 a 0>;
interrupt-parent = <500>;
interrupt-parent = <&mpc5200_pic>;
bus-range = <0 0>;
ranges = <42000000 0 80000000 80000000 0 20000000
02000000 0 a0000000 a0000000 0 10000000
......@@ -212,7 +211,7 @@ spi@f00 {
compatible = "mpc5200-spi";
reg = <f00 20>;
interrupts = <2 d 0 2 e 0>;
interrupt-parent = <500>;
interrupt-parent = <&mpc5200_pic>;
};
usb@1000 {
......@@ -220,7 +219,7 @@ usb@1000 {
compatible = "mpc5200-ohci\0ohci-be";
reg = <1000 ff>;
interrupts = <2 6 0>;
interrupt-parent = <500>;
interrupt-parent = <&mpc5200_pic>;
};
bestcomm@1200 {
......@@ -231,7 +230,7 @@ bestcomm@1200 {
3 4 0 3 5 0 3 6 0 3 7 0
3 8 0 3 9 0 3 a 0 3 b 0
3 c 0 3 d 0 3 e 0 3 f 0>;
interrupt-parent = <500>;
interrupt-parent = <&mpc5200_pic>;
};
xlb@1f00 {
......@@ -246,7 +245,7 @@ serial@2000 { // PSC1
cell-index = <0>;
reg = <2000 100>;
interrupts = <2 1 0>;
interrupt-parent = <500>;
interrupt-parent = <&mpc5200_pic>;
};
// PSC2 in ac97 mode example
......@@ -256,7 +255,7 @@ serial@2000 { // PSC1
// cell-index = <1>;
// reg = <2200 100>;
// interrupts = <2 2 0>;
// interrupt-parent = <500>;
// interrupt-parent = <&mpc5200_pic>;
//};
// PSC3 in CODEC mode example
......@@ -266,7 +265,7 @@ serial@2000 { // PSC1
// cell-index = <2>;
// reg = <2400 100>;
// interrupts = <2 3 0>;
// interrupt-parent = <500>;
// interrupt-parent = <&mpc5200_pic>;
//};
// PSC4 in uart mode example
......@@ -276,7 +275,7 @@ serial@2000 { // PSC1
// cell-index = <3>;
// reg = <2600 100>;
// interrupts = <2 b 0>;
// interrupt-parent = <500>;
// interrupt-parent = <&mpc5200_pic>;
//};
// PSC5 in uart mode example
......@@ -286,7 +285,7 @@ serial@2000 { // PSC1
// cell-index = <4>;
// reg = <2800 100>;
// interrupts = <2 c 0>;
// interrupt-parent = <500>;
// interrupt-parent = <&mpc5200_pic>;
//};
// PSC6 in spi mode example
......@@ -296,7 +295,7 @@ serial@2000 { // PSC1
// cell-index = <5>;
// reg = <2c00 100>;
// interrupts = <2 4 0>;
// interrupt-parent = <500>;
// interrupt-parent = <&mpc5200_pic>;
//};
ethernet@3000 {
......@@ -305,7 +304,7 @@ ethernet@3000 {
reg = <3000 800>;
mac-address = [ 02 03 04 05 06 07 ]; // Bad!
interrupts = <2 5 0>;
interrupt-parent = <500>;
interrupt-parent = <&mpc5200_pic>;
};
ata@3a00 {
......@@ -313,7 +312,7 @@ ata@3a00 {
compatible = "mpc5200-ata";
reg = <3a00 100>;
interrupts = <2 7 0>;
interrupt-parent = <500>;
interrupt-parent = <&mpc5200_pic>;
};
i2c@3d00 {
......@@ -322,7 +321,7 @@ i2c@3d00 {
cell-index = <0>;
reg = <3d00 40>;
interrupts = <2 f 0>;
interrupt-parent = <500>;
interrupt-parent = <&mpc5200_pic>;
fsl5200-clocking;
};
......@@ -332,7 +331,7 @@ i2c@3d40 {
cell-index = <1>;
reg = <3d40 40>;
interrupts = <2 10 0>;
interrupt-parent = <500>;
interrupt-parent = <&mpc5200_pic>;
fsl5200-clocking;
};
sram@8000 {
......
arch/powerpc/boot/dts/lite5200b.dts
View file @ 5c1992f8
......@@ -62,13 +62,12 @@ cdm@200 {
reg = <200 38>;
};
pic@500 {
mpc5200_pic: pic@500 {
// 5200 interrupts are encoded into two levels;
linux,phandle = <500>;
interrupt-controller;
#interrupt-cells = <3>;
device_type = "interrupt-controller";
compatible = "mpc5200b-pic\0mpc5200-pic";
compatible = "mpc5200b-pic\0mpc5200_pic";
reg = <500 80>;
built-in;
};
......@@ -79,7 +78,7 @@ gpt@600 { // General Purpose Timer
cell-index = <0>;
reg = <600 10>;
interrupts = <1 9 0>;
interrupt-parent = <500>;
interrupt-parent = <&mpc5200_pic>;
has-wdt;
};
......@@ -89,7 +88,7 @@ gpt@610 { // General Purpose Timer
cell-index = <1>;
reg = <610 10>;
interrupts = <1 a 0>;
interrupt-parent = <500>;
interrupt-parent = <&mpc5200_pic>;
};
gpt@620 { // General Purpose Timer
......@@ -98,7 +97,7 @@ gpt@620 { // General Purpose Timer
cell-index = <2>;
reg = <620 10>;
interrupts = <1 b 0>;
interrupt-parent = <500>;
interrupt-parent = <&mpc5200_pic>;
};
gpt@630 { // General Purpose Timer
......@@ -107,7 +106,7 @@ gpt@630 { // General Purpose Timer
cell-index = <3>;
reg = <630 10>;
interrupts = <1 c 0>;
interrupt-parent = <500>;
interrupt-parent = <&mpc5200_pic>;
};
gpt@640 { // General Purpose Timer
......@@ -116,7 +115,7 @@ gpt@640 { // General Purpose Timer
cell-index = <4>;
reg = <640 10>;
interrupts = <1 d 0>;
interrupt-parent = <500>;
interrupt-parent = <&mpc5200_pic>;
};
gpt@650 { // General Purpose Timer
......@@ -125,7 +124,7 @@ gpt@650 { // General Purpose Timer
cell-index = <5>;
reg = <650 10>;
interrupts = <1 e 0>;
interrupt-parent = <500>;
interrupt-parent = <&mpc5200_pic>;
};
gpt@660 { // General Purpose Timer
......@@ -134,7 +133,7 @@ gpt@660 { // General Purpose Timer
cell-index = <6>;
reg = <660 10>;
interrupts = <1 f 0>;
interrupt-parent = <500>;
interrupt-parent = <&mpc5200_pic>;
};
gpt@670 { // General Purpose Timer
......@@ -143,7 +142,7 @@ gpt@670 { // General Purpose Timer
cell-index = <7>;
reg = <670 10>;
interrupts = <1 10 0>;
interrupt-parent = <500>;
interrupt-parent = <&mpc5200_pic>;
};
rtc@800 { // Real time clock
......@@ -151,7 +150,7 @@ rtc@800 { // Real time clock
device_type = "rtc";
reg = <800 100>;
interrupts = <1 5 0 1 6 0>;
interrupt-parent = <500>;
interrupt-parent = <&mpc5200_pic>;
};
mscan@900 {
......@@ -159,7 +158,7 @@ mscan@900 {
compatible = "mpc5200b-mscan\0mpc5200-mscan";
cell-index = <0>;
interrupts = <2 11 0>;
interrupt-parent = <500>;
interrupt-parent = <&mpc5200_pic>;
reg = <900 80>;
};
......@@ -168,7 +167,7 @@ mscan@980 {
compatible = "mpc5200b-mscan\0mpc5200-mscan";
cell-index = <1>;
interrupts = <2 12 0>;
interrupt-parent = <500>;
interrupt-parent = <&mpc5200_pic>;
reg = <980 80>;
};
......@@ -176,14 +175,14 @@ gpio@b00 {
compatible = "mpc5200b-gpio\0mpc5200-gpio";
reg = <b00 40>;
interrupts = <1 7 0>;
interrupt-parent = <500>;
interrupt-parent = <&mpc5200_pic>;
};
gpio-wkup@c00 {
compatible = "mpc5200b-gpio-wkup\0mpc5200-gpio-wkup";
reg = <c00 40>;
interrupts = <1 8 0 0 3 0>;
interrupt-parent = <500>;
interrupt-parent = <&mpc5200_pic>;
};
pci@0d00 {
......@@ -194,18 +193,18 @@ pci@0d00 {
compatible = "mpc5200b-pci\0mpc5200-pci";
reg = <d00 100>;
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <c000 0 0 1 500 0 0 3 // 1st slot
c000 0 0 2 500 1 1 3
c000 0 0 3 500 1 2 3
c000 0 0 4 500 1 3 3
c800 0 0 1 500 1 1 3 // 2nd slot
c800 0 0 2 500 1 2 3
c800 0 0 3 500 1 3 3
c800 0 0 4 500 0 0 3>;
interrupt-map = <c000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
c000 0 0 2 &mpc5200_pic 1 1 3
c000 0 0 3 &mpc5200_pic 1 2 3
c000 0 0 4 &mpc5200_pic 1 3 3
c800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot
c800 0 0 2 &mpc5200_pic 1 2 3
c800 0 0 3 &mpc5200_pic 1 3 3
c800 0 0 4 &mpc5200_pic 0 0 3>;
clock-frequency = <0>; // From boot loader
interrupts = <2 8 0 2 9 0 2 a 0>;
interrupt-parent = <500>;
interrupt-parent = <&mpc5200_pic>;
bus-range = <0 0>;
ranges = <42000000 0 80000000 80000000 0 20000000
02000000 0 a0000000 a0000000 0 10000000
......@@ -217,7 +216,7 @@ spi@f00 {
compatible = "mpc5200b-spi\0mpc5200-spi";
reg = <f00 20>;
interrupts = <2 d 0 2 e 0>;
interrupt-parent = <500>;
interrupt-parent = <&mpc5200_pic>;
};
usb@1000 {
......@@ -225,7 +224,7 @@ usb@1000 {
compatible = "mpc5200b-ohci\0mpc5200-ohci\0ohci-be";
reg = <1000 ff>;
interrupts = <2 6 0>;
interrupt-parent = <500>;
interrupt-parent = <&mpc5200_pic>;
};
bestcomm@1200 {
......@@ -236,7 +235,7 @@ bestcomm@1200 {
3 4 0 3 5 0 3 6 0 3 7 0
3 8 0 3 9 0 3 a 0 3 b 0
3 c 0 3 d 0 3 e 0 3 f 0>;
interrupt-parent = <500>;
interrupt-parent = <&mpc5200_pic>;
};
xlb@1f00 {
......@@ -251,7 +250,7 @@ serial@2000 { // PSC1
cell-index = <0>;
reg = <2000 100>;
interrupts = <2 1 0>;
interrupt-parent = <500>;
interrupt-parent = <&mpc5200_pic>;
};
// PSC2 in ac97 mode example
......@@ -261,7 +260,7 @@ serial@2000 { // PSC1
// cell-index = <1>;
// reg = <2200 100>;
// interrupts = <2 2 0>;
// interrupt-parent = <500>;
// interrupt-parent = <&mpc5200_pic>;
//};
// PSC3 in CODEC mode example
......@@ -271,7 +270,7 @@ serial@2000 { // PSC1
// cell-index = <2>;
// reg = <2400 100>;
// interrupts = <2 3 0>;
// interrupt-parent = <500>;
// interrupt-parent = <&mpc5200_pic>;
//};
// PSC4 in uart mode example
......@@ -281,7 +280,7 @@ serial@2000 { // PSC1
// cell-index = <3>;
// reg = <2600 100>;
// interrupts = <2 b 0>;
// interrupt-parent = <500>;
// interrupt-parent = <&mpc5200_pic>;
//};
// PSC5 in uart mode example
......@@ -291,7 +290,7 @@ serial@2000 { // PSC1
// cell-index = <4>;
// reg = <2800 100>;
// interrupts = <2 c 0>;
// interrupt-parent = <500>;
// interrupt-parent = <&mpc5200_pic>;
//};
// PSC6 in spi mode example
......@@ -301,7 +300,7 @@ serial@2000 { // PSC1
// cell-index = <5>;
// reg = <2c00 100>;
// interrupts = <2 4 0>;
// interrupt-parent = <500>;
// interrupt-parent = <&mpc5200_pic>;
//};
ethernet@3000 {
......@@ -310,7 +309,7 @@ ethernet@3000 {
reg = <3000 800>;
mac-address = [ 02 03 04 05 06 07 ]; // Bad!
interrupts = <2 5 0>;
interrupt-parent = <500>;
interrupt-parent = <&mpc5200_pic>;
};
ata@3a00 {
......@@ -318,7 +317,7 @@ ata@3a00 {
compatible = "mpc5200b-ata\0mpc5200-ata";
reg = <3a00 100>;
interrupts = <2 7 0>;
interrupt-parent = <500>;
interrupt-parent = <&mpc5200_pic>;
};
i2c@3d00 {
......@@ -327,7 +326,7 @@ i2c@3d00 {
cell-index = <0>;
reg = <3d00 40>;
interrupts = <2 f 0>;
interrupt-parent = <500>;
interrupt-parent = <&mpc5200_pic>;
fsl5200-clocking;
};
......@@ -337,7 +336,7 @@ i2c@3d40 {
cell-index = <1>;
reg = <3d40 40>;
interrupts = <2 10 0>;
interrupt-parent = <500>;
interrupt-parent = <&mpc5200_pic>;
fsl5200-clocking;
};
sram@8000 {
......
arch/powerpc/boot/dts/mpc7448hpc2.dts
View file @ 5c1992f8
......@@ -16,12 +16,10 @@ / {
compatible = "mpc74xx";
#address-cells = <1>;
#size-cells = <1>;
linux,phandle = <100>;
cpus {
#address-cells = <1>;
#size-cells =<0>;
linux,phandle = <200>;
PowerPC,7448@0 {
device_type = "cpu";
......@@ -34,13 +32,11 @@ PowerPC,7448@0 {
clock-frequency = <0>; // From U-Boot
bus-frequency = <0>; // From U-Boot
32-bit;
linux,phandle = <201>;
};
};
memory {
device_type = "memory";
linux,phandle = <300>;
reg = <00000000 20000000 // DDR2 512M at 0
>;
};
......@@ -55,7 +51,7 @@ tsi108@c0000000 {
bus-frequency = <0>;
i2c@7000 {
interrupt-parent = <7400>;
interrupt-parent = <&mpic>;
interrupts = <E 0>;
reg = <7000 400>;
device_type = "i2c";
......@@ -66,18 +62,16 @@ mdio@6000 {
device_type = "mdio";
compatible = "tsi-ethernet";
ethernet-phy@6000 {
linux,phandle = <6000>;
interrupt-parent = <7400>;
phy8: ethernet-phy@6000 {
interrupt-parent = <&mpic>;
interrupts = <2 1>;
reg = <6000 50>;
phy-id = <8>;
device_type = "ethernet-phy";
};
ethernet-phy@6400 {
linux,phandle = <6400>;
interrupt-parent = <7400>;
phy9: ethernet-phy@6400 {
interrupt-parent = <&mpic>;
interrupts = <2 1>;
reg = <6000 50>;
phy-id = <9>;
......@@ -94,8 +88,8 @@ ethernet@6200 {
reg = <6000 200>;
address = [ 00 06 D2 00 00 01 ];
interrupts = <10 2>;
interrupt-parent = <7400>;
phy-handle = <6000>;
interrupt-parent = <&mpic>;
phy-handle = <&phy8>;
};
ethernet@6600 {
......@@ -107,8 +101,8 @@ ethernet@6600 {
reg = <6400 200>;
address = [ 00 06 D2 00 00 02 ];
interrupts = <11 2>;
interrupt-parent = <7400>;
phy-handle = <6400>;
interrupt-parent = <&mpic>;
phy-handle = <&phy9>;
};
serial@7808 {
......@@ -117,7 +111,7 @@ serial@7808 {
reg = <7808 200>;
clock-frequency = <3f6b5a00>;
interrupts = <c 0>;
interrupt-parent = <7400>;
interrupt-parent = <&mpic>;
};
serial@7c08 {
......@@ -126,11 +120,10 @@ serial@7c08 {
reg = <7c08 200>;
clock-frequency = <3f6b5a00>;
interrupts = <d 0>;
interrupt-parent = <7400>;
interrupt-parent = <&mpic>;
};
pic@7400 {
linux,phandle = <7400>;
mpic: pic@7400 {
clock-frequency = <0>;
interrupt-controller;
#address-cells = <0>;
......@@ -144,7 +137,6 @@ pic@7400 {
pci@1000 {
compatible = "tsi10x";
device_type = "pci";
linux,phandle = <1000>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
......@@ -153,37 +145,37 @@ pci@1000 {
ranges = <02000000 0 e0000000 e0000000 0 1A000000
01000000 0 00000000 fa000000 0 00010000>;
clock-frequency = <7f28154>;
interrupt-parent = <7400>;
interrupt-parent = <&mpic>;
interrupts = <17 2>;
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x11 */
0800 0 0 1 1180 24 0
0800 0 0 2 1180 25 0
0800 0 0 3 1180 26 0
0800 0 0 4 1180 27 0
0800 0 0 1 &RT0 24 0
0800 0 0 2 &RT0 25 0
0800 0 0 3 &RT0 26 0
0800 0 0 4 &RT0 27 0
/* IDSEL 0x12 */
1000 0 0 1 1180 25 0
1000 0 0 2 1180 26 0
1000 0 0 3 1180 27 0
1000 0 0 4 1180 24 0
1000 0 0 1 &RT0 25 0
1000 0 0 2 &RT0 26 0
1000 0 0 3 &RT0 27 0
1000 0 0 4 &RT0 24 0
/* IDSEL 0x13 */
1800 0 0 1 1180 26 0
1800 0 0 2 1180 27 0
1800 0 0 3 1180 24 0
1800 0 0 4 1180 25 0
1800 0 0 1 &RT0 26 0
1800 0 0 2 &RT0 27 0
1800 0 0 3 &RT0 24 0
1800 0 0 4 &RT0 25 0
/* IDSEL 0x14 */
2000 0 0 1 1180 27 0
2000 0 0 2 1180 24 0
2000 0 0 3 1180 25 0
2000 0 0 4 1180 26 0
2000 0 0 1 &RT0 27 0
2000 0 0 2 &RT0 24 0
2000 0 0 3 &RT0 25 0
2000 0 0 4 &RT0 26 0
>;
router@1180 {
linux,phandle = <1180>;
RT0: router@1180 {
clock-frequency = <0>;
interrupt-controller;
device_type = "pic-router";
......@@ -192,7 +184,7 @@ router@1180 {
built-in;
big-endian;
interrupts = <17 2>;
interrupt-parent = <7400>;
interrupt-parent = <&mpic>;
};
};
};
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7