Commit 5c31b0c6 authored by Xiang Chen's avatar Xiang Chen Committed by Martin K. Petersen

scsi: hisi_sas: shutdown axi bus to avoid exception CQ returned

When injecting 2 bit ECC error, it will cause fatal AXI interrupts. Before
the recovery of SAS controller reset, the internal of SAS controller is in
error. If CQ interrupts return at the time, actually it is exception CQ
interrupt, and it may cause resource release in disorder.

To avoid the exception situation, shutdown AXI bus after fatal AXI
interrupt. In SAS controller reset, it will restart AXI bus. For later
version of v3 hw, hardware will shutdown AXI bus for this situation, so
just fix current ver of v3 hw.
Signed-off-by: default avatarXiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: default avatarJohn Garry <john.garry@huawei.com>
Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
parent 569eddcf
......@@ -1646,6 +1646,7 @@ static irqreturn_t fatal_axi_int_v3_hw(int irq_no, void *p)
u32 irq_value, irq_msk;
struct hisi_hba *hisi_hba = p;
struct device *dev = hisi_hba->dev;
struct pci_dev *pdev = hisi_hba->pci_dev;
int i;
irq_msk = hisi_sas_read32(hisi_hba, ENT_INT_SRC_MSK3);
......@@ -1677,6 +1678,17 @@ static irqreturn_t fatal_axi_int_v3_hw(int irq_no, void *p)
error->msg, irq_value);
queue_work(hisi_hba->wq, &hisi_hba->rst_work);
}
if (pdev->revision < 0x21) {
u32 reg_val;
reg_val = hisi_sas_read32(hisi_hba,
AXI_MASTER_CFG_BASE +
AM_CTRL_GLOBAL);
reg_val |= AM_CTRL_SHUTDOWN_REQ_MSK;
hisi_sas_write32(hisi_hba, AXI_MASTER_CFG_BASE +
AM_CTRL_GLOBAL, reg_val);
}
}
if (irq_value & BIT(ENT_INT_SRC3_ITC_INT_OFF)) {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment