Commit 5c5154e4 authored by Masahiro Yamada's avatar Masahiro Yamada Committed by Arnd Bergmann

ARM: dts: uniphier: factor out ranges property of support card

This property is used in common by several boards.  Move it to the
common place (uniphier-support-card.dtsi).  If necessary, each board
can still override the property.
Signed-off-by: default avatarMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
parent 65e43389
...@@ -72,14 +72,6 @@ aliases { ...@@ -72,14 +72,6 @@ aliases {
}; };
}; };
&extbus {
ranges = <1 0x00000000 0x42000000 0x02000000>;
};
&support_card {
ranges = <0x00000000 1 0x01f00000 0x00100000>;
};
&ethsc { &ethsc {
interrupts = <0 49 4>; interrupts = <0 49 4>;
}; };
......
...@@ -74,14 +74,6 @@ aliases { ...@@ -74,14 +74,6 @@ aliases {
}; };
}; };
&extbus {
ranges = <1 0x00000000 0x42000000 0x02000000>;
};
&support_card {
ranges = <0x00000000 1 0x01f00000 0x00100000>;
};
&ethsc { &ethsc {
interrupts = <0 52 4>; interrupts = <0 52 4>;
}; };
......
...@@ -74,14 +74,6 @@ aliases { ...@@ -74,14 +74,6 @@ aliases {
}; };
}; };
&extbus {
ranges = <1 0x00000000 0x42000000 0x02000000>;
};
&support_card {
ranges = <0x00000000 1 0x01f00000 0x00100000>;
};
&ethsc { &ethsc {
interrupts = <0 50 4>; interrupts = <0 50 4>;
}; };
......
...@@ -73,14 +73,6 @@ aliases { ...@@ -73,14 +73,6 @@ aliases {
}; };
}; };
&extbus {
ranges = <1 0x00000000 0x42000000 0x02000000>;
};
&support_card {
ranges = <0x00000000 1 0x01f00000 0x00100000>;
};
&ethsc { &ethsc {
interrupts = <0 49 4>; interrupts = <0 49 4>;
}; };
......
...@@ -72,14 +72,6 @@ aliases { ...@@ -72,14 +72,6 @@ aliases {
}; };
}; };
&extbus {
ranges = <1 0x00000000 0x42000000 0x02000000>;
};
&support_card {
ranges = <0x00000000 1 0x01f00000 0x00100000>;
};
&ethsc { &ethsc {
interrupts = <0 48 4>; interrupts = <0 48 4>;
}; };
......
...@@ -43,10 +43,13 @@ ...@@ -43,10 +43,13 @@
*/ */
&extbus { &extbus {
ranges = <1 0x00000000 0x42000000 0x02000000>;
support_card: support_card { support_card: support_card {
compatible = "simple-bus"; compatible = "simple-bus";
#address-cells = <1>; #address-cells = <1>;
#size-cells = <1>; #size-cells = <1>;
ranges = <0x00000000 1 0x01f00000 0x00100000>;
ethsc: ethernet@00000000 { ethsc: ethernet@00000000 {
compatible = "smsc,lan9118", "smsc,lan9115"; compatible = "smsc,lan9118", "smsc,lan9115";
......
...@@ -74,14 +74,6 @@ aliases { ...@@ -74,14 +74,6 @@ aliases {
}; };
}; };
&extbus {
ranges = <1 0x00000000 0x42000000 0x02000000>;
};
&support_card {
ranges = <0x00000000 1 0x01f00000 0x00100000>;
};
&ethsc { &ethsc {
interrupts = <0 48 4>; interrupts = <0 48 4>;
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment