Commit 5c6201e6 authored by Masahiro Yamada's avatar Masahiro Yamada Committed by Stephen Boyd

clk: uniphier: rename MIO clock to SD clock for Pro5, PXs2, LD20 SoCs

I made a mistake as for naming for this block.  The MIO block is not
implemented for these 3 SoCs in the first place.  The current naming
will be a trouble if an SoC with both MIO and SD-ctrl blocks appear
in the future.

This driver has just been merged in the previous merge window.
Rename it before the release.
Signed-off-by: default avatarMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: default avatarStephen Boyd <sboyd@codeaurora.org>
parent 7d36b9c1
......@@ -24,7 +24,7 @@ Example:
reg = <0x61840000 0x4000>;
clock {
compatible = "socionext,uniphier-ld20-clock";
compatible = "socionext,uniphier-ld11-clock";
#clock-cells = <1>;
};
......@@ -43,8 +43,8 @@ Provided clocks:
21: USB3 ch1 PHY1
Media I/O (MIO) clock
---------------------
Media I/O (MIO) clock, SD clock
-------------------------------
Required properties:
- compatible: should be one of the following:
......@@ -52,10 +52,10 @@ Required properties:
"socionext,uniphier-ld4-mio-clock" - for LD4 SoC.
"socionext,uniphier-pro4-mio-clock" - for Pro4 SoC.
"socionext,uniphier-sld8-mio-clock" - for sLD8 SoC.
"socionext,uniphier-pro5-mio-clock" - for Pro5 SoC.
"socionext,uniphier-pxs2-mio-clock" - for PXs2/LD6b SoC.
"socionext,uniphier-pro5-sd-clock" - for Pro5 SoC.
"socionext,uniphier-pxs2-sd-clock" - for PXs2/LD6b SoC.
"socionext,uniphier-ld11-mio-clock" - for LD11 SoC.
"socionext,uniphier-ld20-mio-clock" - for LD20 SoC.
"socionext,uniphier-ld20-sd-clock" - for LD20 SoC.
- #clock-cells: should be 1.
Example:
......@@ -66,7 +66,7 @@ Example:
reg = <0x59810000 0x800>;
clock {
compatible = "socionext,uniphier-ld20-mio-clock";
compatible = "socionext,uniphier-ld11-mio-clock";
#clock-cells = <1>;
};
......@@ -112,7 +112,7 @@ Example:
reg = <0x59820000 0x200>;
clock {
compatible = "socionext,uniphier-ld20-peri-clock";
compatible = "socionext,uniphier-ld11-peri-clock";
#clock-cells = <1>;
};
......
......@@ -142,7 +142,7 @@ static const struct of_device_id uniphier_clk_match[] = {
.compatible = "socionext,uniphier-ld20-clock",
.data = uniphier_ld20_sys_clk_data,
},
/* Media I/O clock */
/* Media I/O clock, SD clock */
{
.compatible = "socionext,uniphier-sld3-mio-clock",
.data = uniphier_sld3_mio_clk_data,
......@@ -160,20 +160,20 @@ static const struct of_device_id uniphier_clk_match[] = {
.data = uniphier_sld3_mio_clk_data,
},
{
.compatible = "socionext,uniphier-pro5-mio-clock",
.data = uniphier_pro5_mio_clk_data,
.compatible = "socionext,uniphier-pro5-sd-clock",
.data = uniphier_pro5_sd_clk_data,
},
{
.compatible = "socionext,uniphier-pxs2-mio-clock",
.data = uniphier_pro5_mio_clk_data,
.compatible = "socionext,uniphier-pxs2-sd-clock",
.data = uniphier_pro5_sd_clk_data,
},
{
.compatible = "socionext,uniphier-ld11-mio-clock",
.data = uniphier_sld3_mio_clk_data,
},
{
.compatible = "socionext,uniphier-ld20-mio-clock",
.data = uniphier_pro5_mio_clk_data,
.compatible = "socionext,uniphier-ld20-sd-clock",
.data = uniphier_pro5_sd_clk_data,
},
/* Peripheral clock */
{
......
......@@ -93,7 +93,7 @@ const struct uniphier_clk_data uniphier_sld3_mio_clk_data[] = {
{ /* sentinel */ }
};
const struct uniphier_clk_data uniphier_pro5_mio_clk_data[] = {
const struct uniphier_clk_data uniphier_pro5_sd_clk_data[] = {
UNIPHIER_MIO_CLK_SD_FIXED,
UNIPHIER_MIO_CLK_SD(0, 0),
UNIPHIER_MIO_CLK_SD(1, 1),
......
......@@ -115,7 +115,7 @@ extern const struct uniphier_clk_data uniphier_pxs2_sys_clk_data[];
extern const struct uniphier_clk_data uniphier_ld11_sys_clk_data[];
extern const struct uniphier_clk_data uniphier_ld20_sys_clk_data[];
extern const struct uniphier_clk_data uniphier_sld3_mio_clk_data[];
extern const struct uniphier_clk_data uniphier_pro5_mio_clk_data[];
extern const struct uniphier_clk_data uniphier_pro5_sd_clk_data[];
extern const struct uniphier_clk_data uniphier_ld4_peri_clk_data[];
extern const struct uniphier_clk_data uniphier_pro4_peri_clk_data[];
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment