Merge branch 'phy_dsa'

Florian Fainelli says:

====================
net: phy and dsa random fixes/cleanups

These two patches were already present as part of my attempt to make
DSA modules work properly, these are the only two "valid" patches at
this point which should not need any further rework.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/dsa/bcm_sf2.c

@@ -400,6 +400,16 @@ static int bcm_sf2_sw_rst(struct bcm_sf2_priv *priv)
 	return 0;
 }
 
+static void bcm_sf2_intr_disable(struct bcm_sf2_priv *priv)
+{
+	intrl2_0_writel(priv, 0xffffffff, INTRL2_CPU_MASK_SET);
+	intrl2_0_writel(priv, 0xffffffff, INTRL2_CPU_CLEAR);
+	intrl2_0_writel(priv, 0, INTRL2_CPU_MASK_CLEAR);
+	intrl2_1_writel(priv, 0xffffffff, INTRL2_CPU_MASK_SET);
+	intrl2_1_writel(priv, 0xffffffff, INTRL2_CPU_CLEAR);
+	intrl2_1_writel(priv, 0, INTRL2_CPU_MASK_CLEAR);
+}
+
 static int bcm_sf2_sw_setup(struct dsa_switch *ds)
 {
 	const char *reg_names[BCM_SF2_REGS_NUM] = BCM_SF2_REGS_NAME;
@@ -440,12 +450,7 @@ static int bcm_sf2_sw_setup(struct dsa_switch *ds)
 	}
 
 	/* Disable all interrupts and request them */
-	intrl2_0_writel(priv, 0xffffffff, INTRL2_CPU_MASK_SET);
-	intrl2_0_writel(priv, 0xffffffff, INTRL2_CPU_CLEAR);
-	intrl2_0_writel(priv, 0, INTRL2_CPU_MASK_CLEAR);
-	intrl2_1_writel(priv, 0xffffffff, INTRL2_CPU_MASK_SET);
-	intrl2_1_writel(priv, 0xffffffff, INTRL2_CPU_CLEAR);
-	intrl2_1_writel(priv, 0, INTRL2_CPU_MASK_CLEAR);
+	bcm_sf2_intr_disable(priv);
 
 	ret = request_irq(priv->irq0, bcm_sf2_switch_0_isr, 0,
 			  "switch_0", priv);
@@ -747,12 +752,7 @@ static int bcm_sf2_sw_suspend(struct dsa_switch *ds)
 	struct bcm_sf2_priv *priv = ds_to_priv(ds);
 	unsigned int port;
 
-	intrl2_0_writel(priv, 0xffffffff, INTRL2_CPU_MASK_SET);
-	intrl2_0_writel(priv, 0xffffffff, INTRL2_CPU_CLEAR);
-	intrl2_0_writel(priv, 0, INTRL2_CPU_MASK_CLEAR);
-	intrl2_1_writel(priv, 0xffffffff, INTRL2_CPU_MASK_SET);
-	intrl2_1_writel(priv, 0xffffffff, INTRL2_CPU_CLEAR);
-	intrl2_1_writel(priv, 0, INTRL2_CPU_MASK_CLEAR);
+	bcm_sf2_intr_disable(priv);
 
 	/* Disable all ports physically present including the IMP
 	 * port, the other ones have already been disabled during

drivers/net/phy/fixed_phy.c

@@ -168,7 +168,7 @@ int fixed_phy_set_link_update(struct phy_device *phydev,
 	struct fixed_mdio_bus *fmb = &platform_fmb;
 	struct fixed_phy *fp;
 
-	if (!link_update || !phydev || !phydev->bus)
+	if (!phydev || !phydev->bus)
 		return -EINVAL;
 
 	list_for_each_entry(fp, &fmb->phys, node) {