Commit 5ce78f44 authored by Lars Povlsen's avatar Lars Povlsen Committed by Mark Brown

dt-bindings: snps, dw-apb-ssi: Add sparx5 support, plus rx-sample-delay-ns property

This has the following changes for the snps,dw-apb-ss DT bindings:

- Add "microchip,sparx5-spi" as the compatible for the Sparx5 SoC
  controller

- Add the property "rx-sample-delay-ns"
Signed-off-by: default avatarLars Povlsen <lars.povlsen@microchip.com>
Reviewed-by: default avatarRob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200824203010.2033-5-lars.povlsen@microchip.comSigned-off-by: default avatarMark Brown <broonie@kernel.org>
parent 53a09635
......@@ -36,6 +36,8 @@ properties:
- mscc,ocelot-spi
- mscc,jaguar2-spi
- const: snps,dw-apb-ssi
- description: Microchip Sparx5 SoC SPI Controller
const: microchip,sparx5-spi
- description: Amazon Alpine SPI Controller
const: amazon,alpine-dw-apb-ssi
- description: Renesas RZ/N1 SPI Controller
......@@ -93,6 +95,12 @@ properties:
- const: tx
- const: rx
rx-sample-delay-ns:
default: 0
description: Default value of the rx-sample-delay-ns property.
This value will be used if the property is not explicitly defined
for a SPI slave device. See below.
patternProperties:
"^.*@[0-9a-f]+$":
type: object
......@@ -107,6 +115,13 @@ patternProperties:
spi-tx-bus-width:
const: 1
rx-sample-delay-ns:
description: SPI Rx sample delay offset, unit is nanoseconds.
The delay from the default sample time before the actual
sample of the rxd input signal occurs. The "rx_sample_delay"
is an optional feature of the designware controller, and the
upper limit is also subject to controller configuration.
unevaluatedProperties: false
required:
......@@ -129,5 +144,11 @@ examples:
num-cs = <2>;
cs-gpios = <&gpio0 13 0>,
<&gpio0 14 0>;
rx-sample-delay-ns = <3>;
spi-flash@1 {
compatible = "spi-nand";
reg = <1>;
rx-sample-delay-ns = <7>;
};
};
...
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment