drm/i915: Implement intel_crtc_control using atomic state, v4

Assume the callers lock everything with drm_modeset_lock_all.

This change had to be done after converting suspend/resume to
use atomic_state so the atomic state is preserved, otherwise
all transitional state is erased.

Now all callers of .crtc_enable and .crtc_disable go through
atomic modeset! :-D

Changes since v1:
- Only check for crtc_state->active in valleyview_modeset_global_pipes.
- Only check for crtc_state->active in modeset_update_crtc_power_domains.
Changes since v2:
- Rework on top of the changed patch order.
Changes since v3:
- Rename intel_crtc_toggle in description to *_control
- Change return value to int.
- Do not add plane state, should be done implicitly already.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drivers/gpu/drm/i915/intel_display.c

@@ -6238,38 +6238,49 @@ void intel_display_suspend(struct drm_device *dev)
 }
 
 /* Master function to enable/disable CRTC and corresponding power wells */
-void intel_crtc_control(struct drm_crtc *crtc, bool enable)
+int intel_crtc_control(struct drm_crtc *crtc, bool enable)
 {
 	struct drm_device *dev = crtc->dev;
-	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_mode_config *config = &dev->mode_config;
+	struct drm_modeset_acquire_ctx *ctx = config->acquire_ctx;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-	enum intel_display_power_domain domain;
-	unsigned long domains;
+	struct intel_crtc_state *pipe_config;
+	struct drm_atomic_state *state;
+	int ret;
 
 	if (enable == intel_crtc->active)
-		return;
+		return 0;
 
 	if (enable && !crtc->state->enable)
-		return;
+		return 0;
 
-	crtc->state->active = enable;
-	if (enable) {
-		domains = get_crtc_power_domains(crtc);
-		for_each_power_domain(domain, domains)
-			intel_display_power_get(dev_priv, domain);
-		intel_crtc->enabled_power_domains = domains;
+	/* this function should be called with drm_modeset_lock_all for now */
+	if (WARN_ON(!ctx))
+		return -EIO;
+	lockdep_assert_held(&ctx->ww_ctx);
 
-		dev_priv->display.crtc_enable(crtc);
-		intel_crtc_enable_planes(crtc);
-	} else {
-		intel_crtc_disable_planes(crtc);
-		dev_priv->display.crtc_disable(crtc);
+	state = drm_atomic_state_alloc(dev);
+	if (WARN_ON(!state))
+		return -ENOMEM;
 
-		domains = intel_crtc->enabled_power_domains;
-		for_each_power_domain(domain, domains)
-			intel_display_power_put(dev_priv, domain);
-		intel_crtc->enabled_power_domains = 0;
+	state->acquire_ctx = ctx;
+	state->allow_modeset = true;
+
+	pipe_config = intel_atomic_get_crtc_state(state, intel_crtc);
+	if (IS_ERR(pipe_config)) {
+		ret = PTR_ERR(pipe_config);
+		goto err;
 	}
+	pipe_config->base.active = enable;
+
+	ret = intel_set_mode(state);
+	if (!ret)
+		return ret;
+
+err:
+	DRM_ERROR("Updating crtc active failed with %i\n", ret);
+	drm_atomic_state_free(state);
+	return ret;
 }
 
 /**

drivers/gpu/drm/i915/intel_drv.h

@@ -990,7 +990,7 @@ void intel_mark_busy(struct drm_device *dev);
 void intel_mark_idle(struct drm_device *dev);
 void intel_crtc_restore_mode(struct drm_crtc *crtc);
 void intel_display_suspend(struct drm_device *dev);
-void intel_crtc_control(struct drm_crtc *crtc, bool enable);
+int intel_crtc_control(struct drm_crtc *crtc, bool enable);
 void intel_crtc_update_dpms(struct drm_crtc *crtc);
 void intel_encoder_destroy(struct drm_encoder *encoder);
 int intel_connector_init(struct intel_connector *);