Skip to content

L
linux
Commit 5db6db0d authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge branch 'work.uaccess' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs 

Pull uaccess unification updates from Al Viro:
 "This is the uaccess unification pile. It's _not_ the end of uaccess
  work, but the next batch of that will go into the next cycle. This one
  mostly takes copy_from_user() and friends out of arch/* and gets the
  zero-padding behaviour in sync for all architectures.

  Dealing with the nocache/writethrough mess is for the next cycle;
  fortunately, that's x86-only. Same for cleanups in iov_iter.c (I am
  sold on access_ok() in there, BTW; just not in this pile), same for
  reducing __copy_... callsites, strn*... stuff, etc. - there will be a
  pile about as large as this one in the next merge window.

  This one sat in -next for weeks. -3KLoC"

* 'work.uaccess' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (96 commits)
  HAVE_ARCH_HARDENED_USERCOPY is unconditional now
  CONFIG_ARCH_HAS_RAW_COPY_USER is unconditional now
  m32r: switch to RAW_COPY_USER
  hexagon: switch to RAW_COPY_USER
  microblaze: switch to RAW_COPY_USER
  get rid of padding, switch to RAW_COPY_USER
  ia64: get rid of copy_in_user()
  ia64: sanitize __access_ok()
  ia64: get rid of 'segment' argument of __do_{get,put}_user()
  ia64: get rid of 'segment' argument of __{get,put}_user_check()
  ia64: add extable.h
  powerpc: get rid of zeroing, switch to RAW_COPY_USER
  esas2r: don't open-code memdup_user()
  alpha: fix stack smashing in old_adjtimex(2)
  don't open-code kernel_setsockopt()
  mips: switch to RAW_COPY_USER
  mips: get rid of tail-zeroing in primitives
  mips: make copy_from_user() zero tail explicitly
  mips: clean and reorder the forest of macros...
  mips: consolidate __invoke_... wrappers
  ...
parents 5fab1004 2fefc97b
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 1458 additions and 4335 deletions
arch/alpha/include/asm/extable.h 0 → 100644
View file @ 5db6db0d
#ifndef _ASM_EXTABLE_H
#define _ASM_EXTABLE_H
/*
* About the exception table:
*
* - insn is a 32-bit pc-relative offset from the faulting insn.
* - nextinsn is a 16-bit offset off of the faulting instruction
* (not off of the *next* instruction as branches are).
* - errreg is the register in which to place -EFAULT.
* - valreg is the final target register for the load sequence
* and will be zeroed.
*
* Either errreg or valreg may be $31, in which case nothing happens.
*
* The exception fixup information "just so happens" to be arranged
* as in a MEM format instruction. This lets us emit our three
* values like so:
*
* lda valreg, nextinsn(errreg)
*
*/
struct exception_table_entry
{
signed int insn;
union exception_fixup {
unsigned unit;
struct {
signed int nextinsn : 16;
unsigned int errreg : 5;
unsigned int valreg : 5;
} bits;
} fixup;
};
/* Returns the new pc */
#define fixup_exception(map_reg, _fixup, pc) \
({ \
if ((_fixup)->fixup.bits.valreg != 31) \
map_reg((_fixup)->fixup.bits.valreg) = 0; \
if ((_fixup)->fixup.bits.errreg != 31) \
map_reg((_fixup)->fixup.bits.errreg) = -EFAULT; \
(pc) + (_fixup)->fixup.bits.nextinsn; \
})
#define ARCH_HAS_RELATIVE_EXTABLE
#define swap_ex_entry_fixup(a, b, tmp, delta) \
do { \
(a)->fixup.unit = (b)->fixup.unit; \
(b)->fixup.unit = (tmp).fixup.unit; \
} while (0)
#endif
arch/alpha/include/asm/futex.h
View file @ 5db6db0d
......@@ -19,12 +19,8 @@
"3: .subsection 2\n" \
"4: br 1b\n" \
" .previous\n" \
" .section __ex_table,\"a\"\n" \
" .long 1b-.\n" \
" lda $31,3b-1b(%1)\n" \
" .long 2b-.\n" \
" lda $31,3b-2b(%1)\n" \
" .previous\n" \
EXC(1b,3b,%1,$31) \
EXC(2b,3b,%1,$31) \
: "=&r" (oldval), "=&r"(ret) \
: "r" (uaddr), "r"(oparg) \
: "memory")
......@@ -101,12 +97,8 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
"3: .subsection 2\n"
"4: br 1b\n"
" .previous\n"
" .section __ex_table,\"a\"\n"
" .long 1b-.\n"
" lda $31,3b-1b(%0)\n"
" .long 2b-.\n"
" lda $31,3b-2b(%0)\n"
" .previous\n"
EXC(1b,3b,%0,$31)
EXC(2b,3b,%0,$31)
: "+r"(ret), "=&r"(prev), "=&r"(cmp)
: "r"(uaddr), "r"((long)(int)oldval), "r"(newval)
: "memory");
......
arch/alpha/include/asm/uaccess.h
View file @ 5db6db0d
This diff is collapsed.
arch/alpha/kernel/traps.c
View file @ 5db6db0d
......@@ -482,12 +482,8 @@ do_entUna(void * va, unsigned long opcode, unsigned long reg,
" extwl %1,%3,%1\n"
" extwh %2,%3,%2\n"
"3:\n"
".section __ex_table,\"a\"\n"
" .long 1b - .\n"
" lda %1,3b-1b(%0)\n"
" .long 2b - .\n"
" lda %2,3b-2b(%0)\n"
".previous"
EXC(1b,3b,%1,%0)
EXC(2b,3b,%2,%0)
: "=r"(error), "=&r"(tmp1), "=&r"(tmp2)
: "r"(va), "0"(0));
if (error)
......@@ -502,12 +498,8 @@ do_entUna(void * va, unsigned long opcode, unsigned long reg,
" extll %1,%3,%1\n"
" extlh %2,%3,%2\n"
"3:\n"
".section __ex_table,\"a\"\n"
" .long 1b - .\n"
" lda %1,3b-1b(%0)\n"
" .long 2b - .\n"
" lda %2,3b-2b(%0)\n"
".previous"
EXC(1b,3b,%1,%0)
EXC(2b,3b,%2,%0)
: "=r"(error), "=&r"(tmp1), "=&r"(tmp2)
: "r"(va), "0"(0));
if (error)
......@@ -522,12 +514,8 @@ do_entUna(void * va, unsigned long opcode, unsigned long reg,
" extql %1,%3,%1\n"
" extqh %2,%3,%2\n"
"3:\n"
".section __ex_table,\"a\"\n"
" .long 1b - .\n"
" lda %1,3b-1b(%0)\n"
" .long 2b - .\n"
" lda %2,3b-2b(%0)\n"
".previous"
EXC(1b,3b,%1,%0)
EXC(2b,3b,%2,%0)
: "=r"(error), "=&r"(tmp1), "=&r"(tmp2)
: "r"(va), "0"(0));
if (error)
......@@ -551,16 +539,10 @@ do_entUna(void * va, unsigned long opcode, unsigned long reg,
"3: stq_u %2,1(%5)\n"
"4: stq_u %1,0(%5)\n"
"5:\n"
".section __ex_table,\"a\"\n"
" .long 1b - .\n"
" lda %2,5b-1b(%0)\n"
" .long 2b - .\n"
" lda %1,5b-2b(%0)\n"
" .long 3b - .\n"
" lda $31,5b-3b(%0)\n"
" .long 4b - .\n"
" lda $31,5b-4b(%0)\n"
".previous"
EXC(1b,5b,%2,%0)
EXC(2b,5b,%1,%0)
EXC(3b,5b,$31,%0)
EXC(4b,5b,$31,%0)
: "=r"(error), "=&r"(tmp1), "=&r"(tmp2),
"=&r"(tmp3), "=&r"(tmp4)
: "r"(va), "r"(una_reg(reg)), "0"(0));
......@@ -581,16 +563,10 @@ do_entUna(void * va, unsigned long opcode, unsigned long reg,
"3: stq_u %2,3(%5)\n"
"4: stq_u %1,0(%5)\n"
"5:\n"
".section __ex_table,\"a\"\n"
" .long 1b - .\n"
" lda %2,5b-1b(%0)\n"
" .long 2b - .\n"
" lda %1,5b-2b(%0)\n"
" .long 3b - .\n"
" lda $31,5b-3b(%0)\n"
" .long 4b - .\n"
" lda $31,5b-4b(%0)\n"
".previous"
EXC(1b,5b,%2,%0)
EXC(2b,5b,%1,%0)
EXC(3b,5b,$31,%0)
EXC(4b,5b,$31,%0)
: "=r"(error), "=&r"(tmp1), "=&r"(tmp2),
"=&r"(tmp3), "=&r"(tmp4)
: "r"(va), "r"(una_reg(reg)), "0"(0));
......@@ -611,16 +587,10 @@ do_entUna(void * va, unsigned long opcode, unsigned long reg,
"3: stq_u %2,7(%5)\n"
"4: stq_u %1,0(%5)\n"
"5:\n"
".section __ex_table,\"a\"\n\t"
" .long 1b - .\n"
" lda %2,5b-1b(%0)\n"
" .long 2b - .\n"
" lda %1,5b-2b(%0)\n"
" .long 3b - .\n"
" lda $31,5b-3b(%0)\n"
" .long 4b - .\n"
" lda $31,5b-4b(%0)\n"
".previous"
EXC(1b,5b,%2,%0)
EXC(2b,5b,%1,%0)
EXC(3b,5b,$31,%0)
EXC(4b,5b,$31,%0)
: "=r"(error), "=&r"(tmp1), "=&r"(tmp2),
"=&r"(tmp3), "=&r"(tmp4)
: "r"(va), "r"(una_reg(reg)), "0"(0));
......@@ -802,7 +772,7 @@ do_entUnaUser(void __user * va, unsigned long opcode,
/* Don't bother reading ds in the access check since we already
know that this came from the user. Also rely on the fact that
the page at TASK_SIZE is unmapped and so can't be touched anyway. */
if (!__access_ok((unsigned long)va, 0, USER_DS))
if ((unsigned long)va >= TASK_SIZE)
goto give_sigsegv;
++unaligned[1].count;
......@@ -835,12 +805,8 @@ do_entUnaUser(void __user * va, unsigned long opcode,
" extwl %1,%3,%1\n"
" extwh %2,%3,%2\n"
"3:\n"
".section __ex_table,\"a\"\n"
" .long 1b - .\n"
" lda %1,3b-1b(%0)\n"
" .long 2b - .\n"
" lda %2,3b-2b(%0)\n"
".previous"
EXC(1b,3b,%1,%0)
EXC(2b,3b,%2,%0)
: "=r"(error), "=&r"(tmp1), "=&r"(tmp2)
: "r"(va), "0"(0));
if (error)
......@@ -855,12 +821,8 @@ do_entUnaUser(void __user * va, unsigned long opcode,
" extll %1,%3,%1\n"
" extlh %2,%3,%2\n"
"3:\n"
".section __ex_table,\"a\"\n"
" .long 1b - .\n"
" lda %1,3b-1b(%0)\n"
" .long 2b - .\n"
" lda %2,3b-2b(%0)\n"
".previous"
EXC(1b,3b,%1,%0)
EXC(2b,3b,%2,%0)
: "=r"(error), "=&r"(tmp1), "=&r"(tmp2)
: "r"(va), "0"(0));
if (error)
......@@ -875,12 +837,8 @@ do_entUnaUser(void __user * va, unsigned long opcode,
" extql %1,%3,%1\n"
" extqh %2,%3,%2\n"
"3:\n"
".section __ex_table,\"a\"\n"
" .long 1b - .\n"
" lda %1,3b-1b(%0)\n"
" .long 2b - .\n"
" lda %2,3b-2b(%0)\n"
".previous"
EXC(1b,3b,%1,%0)
EXC(2b,3b,%2,%0)
: "=r"(error), "=&r"(tmp1), "=&r"(tmp2)
: "r"(va), "0"(0));
if (error)
......@@ -895,12 +853,8 @@ do_entUnaUser(void __user * va, unsigned long opcode,
" extll %1,%3,%1\n"
" extlh %2,%3,%2\n"
"3:\n"
".section __ex_table,\"a\"\n"
" .long 1b - .\n"
" lda %1,3b-1b(%0)\n"
" .long 2b - .\n"
" lda %2,3b-2b(%0)\n"
".previous"
EXC(1b,3b,%1,%0)
EXC(2b,3b,%2,%0)
: "=r"(error), "=&r"(tmp1), "=&r"(tmp2)
: "r"(va), "0"(0));
if (error)
......@@ -915,12 +869,8 @@ do_entUnaUser(void __user * va, unsigned long opcode,
" extql %1,%3,%1\n"
" extqh %2,%3,%2\n"
"3:\n"
".section __ex_table,\"a\"\n"
" .long 1b - .\n"
" lda %1,3b-1b(%0)\n"
" .long 2b - .\n"
" lda %2,3b-2b(%0)\n"
".previous"
EXC(1b,3b,%1,%0)
EXC(2b,3b,%2,%0)
: "=r"(error), "=&r"(tmp1), "=&r"(tmp2)
: "r"(va), "0"(0));
if (error)
......@@ -944,16 +894,10 @@ do_entUnaUser(void __user * va, unsigned long opcode,
"3: stq_u %2,1(%5)\n"
"4: stq_u %1,0(%5)\n"
"5:\n"
".section __ex_table,\"a\"\n"
" .long 1b - .\n"
" lda %2,5b-1b(%0)\n"
" .long 2b - .\n"
" lda %1,5b-2b(%0)\n"
" .long 3b - .\n"
" lda $31,5b-3b(%0)\n"
" .long 4b - .\n"
" lda $31,5b-4b(%0)\n"
".previous"
EXC(1b,5b,%2,%0)
EXC(2b,5b,%1,%0)
EXC(3b,5b,$31,%0)
EXC(4b,5b,$31,%0)
: "=r"(error), "=&r"(tmp1), "=&r"(tmp2),
"=&r"(tmp3), "=&r"(tmp4)
: "r"(va), "r"(*reg_addr), "0"(0));
......@@ -978,16 +922,10 @@ do_entUnaUser(void __user * va, unsigned long opcode,
"3: stq_u %2,3(%5)\n"
"4: stq_u %1,0(%5)\n"
"5:\n"
".section __ex_table,\"a\"\n"
" .long 1b - .\n"
" lda %2,5b-1b(%0)\n"
" .long 2b - .\n"
" lda %1,5b-2b(%0)\n"
" .long 3b - .\n"
" lda $31,5b-3b(%0)\n"
" .long 4b - .\n"
" lda $31,5b-4b(%0)\n"
".previous"
EXC(1b,5b,%2,%0)
EXC(2b,5b,%1,%0)
EXC(3b,5b,$31,%0)
EXC(4b,5b,$31,%0)
: "=r"(error), "=&r"(tmp1), "=&r"(tmp2),
"=&r"(tmp3), "=&r"(tmp4)
: "r"(va), "r"(*reg_addr), "0"(0));
......@@ -1012,16 +950,10 @@ do_entUnaUser(void __user * va, unsigned long opcode,
"3: stq_u %2,7(%5)\n"
"4: stq_u %1,0(%5)\n"
"5:\n"
".section __ex_table,\"a\"\n\t"
" .long 1b - .\n"
" lda %2,5b-1b(%0)\n"
" .long 2b - .\n"
" lda %1,5b-2b(%0)\n"
" .long 3b - .\n"
" lda $31,5b-3b(%0)\n"
" .long 4b - .\n"
" lda $31,5b-4b(%0)\n"
".previous"
EXC(1b,5b,%2,%0)
EXC(2b,5b,%1,%0)
EXC(3b,5b,$31,%0)
EXC(4b,5b,$31,%0)
: "=r"(error), "=&r"(tmp1), "=&r"(tmp2),
"=&r"(tmp3), "=&r"(tmp4)
: "r"(va), "r"(*reg_addr), "0"(0));
......@@ -1047,7 +979,7 @@ do_entUnaUser(void __user * va, unsigned long opcode,
/* We need to replicate some of the logic in mm/fault.c,
since we don't have access to the fault code in the
exception handling return path. */
if (!__access_ok((unsigned long)va, 0, USER_DS))
if ((unsigned long)va >= TASK_SIZE)
info.si_code = SEGV_ACCERR;
else {
struct mm_struct *mm = current->mm;
......
arch/alpha/lib/clear_user.S
View file @ 5db6db0d
......@@ -8,21 +8,6 @@
* right "bytes left to zero" value (and that it is updated only _after_
* a successful copy). There is also some rather minor exception setup
* stuff.
*
* NOTE! This is not directly C-callable, because the calling semantics
* are different:
*
* Inputs:
* length in $0
* destination address in $6
* exception pointer in $7
* return address in $28 (exceptions expect it there)
*
* Outputs:
* bytes left to copy in $0
*
* Clobbers:
* $1,$2,$3,$4,$5,$6
*/
#include <asm/export.h>
......@@ -38,62 +23,63 @@
.set noreorder
.align 4
.globl __do_clear_user
.ent __do_clear_user
.frame $30, 0, $28
.globl __clear_user
.ent __clear_user
.frame $30, 0, $26
.prologue 0
$loop:
and $1, 3, $4 # e0 :
beq $4, 1f # .. e1 :
0: EX( stq_u $31, 0($6) ) # e0 : zero one word
0: EX( stq_u $31, 0($16) ) # e0 : zero one word
subq $0, 8, $0 # .. e1 :
subq $4, 1, $4 # e0 :
addq $6, 8, $6 # .. e1 :
addq $16, 8, $16 # .. e1 :
bne $4, 0b # e1 :
unop # :
1: bic $1, 3, $1 # e0 :
beq $1, $tail # .. e1 :
2: EX( stq_u $31, 0($6) ) # e0 : zero four words
2: EX( stq_u $31, 0($16) ) # e0 : zero four words
subq $0, 8, $0 # .. e1 :
EX( stq_u $31, 8($6) ) # e0 :
EX( stq_u $31, 8($16) ) # e0 :
subq $0, 8, $0 # .. e1 :
EX( stq_u $31, 16($6) ) # e0 :
EX( stq_u $31, 16($16) ) # e0 :
subq $0, 8, $0 # .. e1 :
EX( stq_u $31, 24($6) ) # e0 :
EX( stq_u $31, 24($16) ) # e0 :
subq $0, 8, $0 # .. e1 :
subq $1, 4, $1 # e0 :
addq $6, 32, $6 # .. e1 :
addq $16, 32, $16 # .. e1 :
bne $1, 2b # e1 :
$tail:
bne $2, 1f # e1 : is there a tail to do?
ret $31, ($28), 1 # .. e1 :
ret $31, ($26), 1 # .. e1 :
1: EX( ldq_u $5, 0($6) ) # e0 :
1: EX( ldq_u $5, 0($16) ) # e0 :
clr $0 # .. e1 :
nop # e1 :
mskqh $5, $0, $5 # e0 :
EX( stq_u $5, 0($6) ) # e0 :
ret $31, ($28), 1 # .. e1 :
EX( stq_u $5, 0($16) ) # e0 :
ret $31, ($26), 1 # .. e1 :
__do_clear_user:
and $6, 7, $4 # e0 : find dest misalignment
__clear_user:
and $17, $17, $0
and $16, 7, $4 # e0 : find dest misalignment
beq $0, $zerolength # .. e1 :
addq $0, $4, $1 # e0 : bias counter
and $1, 7, $2 # e1 : number of bytes in tail
srl $1, 3, $1 # e0 :
beq $4, $loop # .. e1 :
EX( ldq_u $5, 0($6) ) # e0 : load dst word to mask back in
EX( ldq_u $5, 0($16) ) # e0 : load dst word to mask back in
beq $1, $oneword # .. e1 : sub-word store?
mskql $5, $6, $5 # e0 : take care of misaligned head
addq $6, 8, $6 # .. e1 :
EX( stq_u $5, -8($6) ) # e0 :
mskql $5, $16, $5 # e0 : take care of misaligned head
addq $16, 8, $16 # .. e1 :
EX( stq_u $5, -8($16) ) # e0 :
addq $0, $4, $0 # .. e1 : bytes left -= 8 - misalignment
subq $1, 1, $1 # e0 :
subq $0, 8, $0 # .. e1 :
......@@ -101,15 +87,15 @@ __do_clear_user:
unop # :
$oneword:
mskql $5, $6, $4 # e0 :
mskql $5, $16, $4 # e0 :
mskqh $5, $2, $5 # e0 :
or $5, $4, $5 # e1 :
EX( stq_u $5, 0($6) ) # e0 :
EX( stq_u $5, 0($16) ) # e0 :
clr $0 # .. e1 :
$zerolength:
$exception:
ret $31, ($28), 1 # .. e1 :
ret $31, ($26), 1 # .. e1 :
.end __do_clear_user
EXPORT_SYMBOL(__do_clear_user)
.end __clear_user
EXPORT_SYMBOL(__clear_user)
arch/alpha/lib/copy_user.S
View file @ 5db6db0d
......@@ -9,21 +9,6 @@
* contains the right "bytes left to copy" value (and that it is updated
* only _after_ a successful copy). There is also some rather minor
* exception setup stuff..
*
* NOTE! This is not directly C-callable, because the calling semantics are
* different:
*
* Inputs:
* length in $0
* destination address in $6
* source address in $7
* return address in $28
*
* Outputs:
* bytes left to copy in $0
*
* Clobbers:
* $1,$2,$3,$4,$5,$6,$7
*/
#include <asm/export.h>
......@@ -49,58 +34,59 @@
.ent __copy_user
__copy_user:
.prologue 0
and $6,7,$3
and $18,$18,$0
and $16,7,$3
beq $0,$35
beq $3,$36
subq $3,8,$3
.align 4
$37:
EXI( ldq_u $1,0($7) )
EXO( ldq_u $2,0($6) )
extbl $1,$7,$1
mskbl $2,$6,$2
insbl $1,$6,$1
EXI( ldq_u $1,0($17) )
EXO( ldq_u $2,0($16) )
extbl $1,$17,$1
mskbl $2,$16,$2
insbl $1,$16,$1
addq $3,1,$3
bis $1,$2,$1
EXO( stq_u $1,0($6) )
EXO( stq_u $1,0($16) )
subq $0,1,$0
addq $6,1,$6
addq $7,1,$7
addq $16,1,$16
addq $17,1,$17
beq $0,$41
bne $3,$37
$36:
and $7,7,$1
and $17,7,$1
bic $0,7,$4
beq $1,$43
beq $4,$48
EXI( ldq_u $3,0($7) )
EXI( ldq_u $3,0($17) )
.align 4
$50:
EXI( ldq_u $2,8($7) )
EXI( ldq_u $2,8($17) )
subq $4,8,$4
extql $3,$7,$3
extqh $2,$7,$1
extql $3,$17,$3
extqh $2,$17,$1
bis $3,$1,$1
EXO( stq $1,0($6) )
addq $7,8,$7
EXO( stq $1,0($16) )
addq $17,8,$17
subq $0,8,$0
addq $6,8,$6
addq $16,8,$16
bis $2,$2,$3
bne $4,$50
$48:
beq $0,$41
.align 4
$57:
EXI( ldq_u $1,0($7) )
EXO( ldq_u $2,0($6) )
extbl $1,$7,$1
mskbl $2,$6,$2
insbl $1,$6,$1
EXI( ldq_u $1,0($17) )
EXO( ldq_u $2,0($16) )
extbl $1,$17,$1
mskbl $2,$16,$2
insbl $1,$16,$1
bis $1,$2,$1
EXO( stq_u $1,0($6) )
EXO( stq_u $1,0($16) )
subq $0,1,$0
addq $6,1,$6
addq $7,1,$7
addq $16,1,$16
addq $17,1,$17
bne $0,$57
br $31,$41
.align 4
......@@ -108,27 +94,27 @@ $43:
beq $4,$65
.align 4
$66:
EXI( ldq $1,0($7) )
EXI( ldq $1,0($17) )
subq $4,8,$4
EXO( stq $1,0($6) )
addq $7,8,$7
EXO( stq $1,0($16) )
addq $17,8,$17
subq $0,8,$0
addq $6,8,$6
addq $16,8,$16
bne $4,$66
$65:
beq $0,$41
EXI( ldq $2,0($7) )
EXO( ldq $1,0($6) )
EXI( ldq $2,0($17) )
EXO( ldq $1,0($16) )
mskql $2,$0,$2
mskqh $1,$0,$1
bis $2,$1,$2
EXO( stq $2,0($6) )
EXO( stq $2,0($16) )
bis $31,$31,$0
$41:
$35:
$exitin:
$exitout:
ret $31,($28),1
ret $31,($26),1
.end __copy_user
EXPORT_SYMBOL(__copy_user)
arch/alpha/lib/csum_partial_copy.c
View file @ 5db6db0d
......@@ -45,10 +45,7 @@ __asm__ __volatile__("insqh %1,%2,%0":"=r" (z):"r" (x),"r" (y))
__asm__ __volatile__( \
"1: ldq_u %0,%2\n" \
"2:\n" \
".section __ex_table,\"a\"\n" \
" .long 1b - .\n" \
" lda %0,2b-1b(%1)\n" \
".previous" \
EXC(1b,2b,%0,%1) \
: "=r"(x), "=r"(__guu_err) \
: "m"(__m(ptr)), "1"(0)); \
__guu_err; \
......@@ -60,10 +57,7 @@ __asm__ __volatile__("insqh %1,%2,%0":"=r" (z):"r" (x),"r" (y))
__asm__ __volatile__( \
"1: stq_u %2,%1\n" \
"2:\n" \
".section __ex_table,\"a\"\n" \
" .long 1b - ." \
" lda $31,2b-1b(%0)\n" \
".previous" \
EXC(1b,2b,$31,%0) \
: "=r"(__puu_err) \
: "m"(__m(addr)), "rJ"(x), "0"(0)); \
__puu_err; \
......
arch/alpha/lib/ev6-clear_user.S
View file @ 5db6db0d
......@@ -9,21 +9,6 @@
* a successful copy). There is also some rather minor exception setup
* stuff.
*
* NOTE! This is not directly C-callable, because the calling semantics
* are different:
*
* Inputs:
* length in $0
* destination address in $6
* exception pointer in $7
* return address in $28 (exceptions expect it there)
*
* Outputs:
* bytes left to copy in $0
*
* Clobbers:
* $1,$2,$3,$4,$5,$6
*
* Much of the information about 21264 scheduling/coding comes from:
* Compiler Writer's Guide for the Alpha 21264
* abbreviated as 'CWG' in other comments here
......@@ -56,14 +41,15 @@
.set noreorder
.align 4
.globl __do_clear_user
.ent __do_clear_user
.frame $30, 0, $28
.globl __clear_user
.ent __clear_user
.frame $30, 0, $26
.prologue 0
# Pipeline info : Slotting & Comments
__do_clear_user:
and $6, 7, $4 # .. E .. .. : find dest head misalignment
__clear_user:
and $17, $17, $0
and $16, 7, $4 # .. E .. .. : find dest head misalignment
beq $0, $zerolength # U .. .. .. : U L U L
addq $0, $4, $1 # .. .. .. E : bias counter
......@@ -75,14 +61,14 @@ __do_clear_user:
/*
* Head is not aligned. Write (8 - $4) bytes to head of destination
* This means $6 is known to be misaligned
* This means $16 is known to be misaligned
*/
EX( ldq_u $5, 0($6) ) # .. .. .. L : load dst word to mask back in
EX( ldq_u $5, 0($16) ) # .. .. .. L : load dst word to mask back in
beq $1, $onebyte # .. .. U .. : sub-word store?
mskql $5, $6, $5 # .. U .. .. : take care of misaligned head
addq $6, 8, $6 # E .. .. .. : L U U L
mskql $5, $16, $5 # .. U .. .. : take care of misaligned head
addq $16, 8, $16 # E .. .. .. : L U U L
EX( stq_u $5, -8($6) ) # .. .. .. L :
EX( stq_u $5, -8($16) ) # .. .. .. L :
subq $1, 1, $1 # .. .. E .. :
addq $0, $4, $0 # .. E .. .. : bytes left -= 8 - misalignment
subq $0, 8, $0 # E .. .. .. : U L U L
......@@ -93,11 +79,11 @@ __do_clear_user:
* values upon initial entry to the loop
* $1 is number of quadwords to clear (zero is a valid value)
* $2 is number of trailing bytes (0..7) ($2 never used...)
* $6 is known to be aligned 0mod8
* $16 is known to be aligned 0mod8
*/
$headalign:
subq $1, 16, $4 # .. .. .. E : If < 16, we can not use the huge loop
and $6, 0x3f, $2 # .. .. E .. : Forward work for huge loop
and $16, 0x3f, $2 # .. .. E .. : Forward work for huge loop
subq $2, 0x40, $3 # .. E .. .. : bias counter (huge loop)
blt $4, $trailquad # U .. .. .. : U L U L
......@@ -114,21 +100,21 @@ $headalign:
beq $3, $bigalign # U .. .. .. : U L U L : Aligned 0mod64
$alignmod64:
EX( stq_u $31, 0($6) ) # .. .. .. L
EX( stq_u $31, 0($16) ) # .. .. .. L
addq $3, 8, $3 # .. .. E ..
subq $0, 8, $0 # .. E .. ..
nop # E .. .. .. : U L U L
nop # .. .. .. E
subq $1, 1, $1 # .. .. E ..
addq $6, 8, $6 # .. E .. ..
addq $16, 8, $16 # .. E .. ..
blt $3, $alignmod64 # U .. .. .. : U L U L
$bigalign:
/*
* $0 is the number of bytes left
* $1 is the number of quads left
* $6 is aligned 0mod64
* $16 is aligned 0mod64
* we know that we'll be taking a minimum of one trip through
* CWG Section 3.7.6: do not expect a sustained store rate of > 1/cycle
* We are _not_ going to update $0 after every single store. That
......@@ -145,39 +131,39 @@ $bigalign:
nop # E :
nop # E :
nop # E :
bis $6,$6,$3 # E : U L U L : Initial wh64 address is dest
bis $16,$16,$3 # E : U L U L : Initial wh64 address is dest
/* This might actually help for the current trip... */
$do_wh64:
wh64 ($3) # .. .. .. L1 : memory subsystem hint
subq $1, 16, $4 # .. .. E .. : Forward calculation - repeat the loop?
EX( stq_u $31, 0($6) ) # .. L .. ..
EX( stq_u $31, 0($16) ) # .. L .. ..
subq $0, 8, $0 # E .. .. .. : U L U L
addq $6, 128, $3 # E : Target address of wh64
EX( stq_u $31, 8($6) ) # L :
EX( stq_u $31, 16($6) ) # L :
addq $16, 128, $3 # E : Target address of wh64
EX( stq_u $31, 8($16) ) # L :
EX( stq_u $31, 16($16) ) # L :
subq $0, 16, $0 # E : U L L U
nop # E :
EX( stq_u $31, 24($6) ) # L :
EX( stq_u $31, 32($6) ) # L :
EX( stq_u $31, 24($16) ) # L :
EX( stq_u $31, 32($16) ) # L :
subq $0, 168, $5 # E : U L L U : two trips through the loop left?
/* 168 = 192 - 24, since we've already completed some stores */
subq $0, 16, $0 # E :
EX( stq_u $31, 40($6) ) # L :
EX( stq_u $31, 48($6) ) # L :
cmovlt $5, $6, $3 # E : U L L U : Latency 2, extra mapping cycle
EX( stq_u $31, 40($16) ) # L :
EX( stq_u $31, 48($16) ) # L :
cmovlt $5, $16, $3 # E : U L L U : Latency 2, extra mapping cycle
subq $1, 8, $1 # E :
subq $0, 16, $0 # E :
EX( stq_u $31, 56($6) ) # L :
EX( stq_u $31, 56($16) ) # L :
nop # E : U L U L
nop # E :
subq $0, 8, $0 # E :
addq $6, 64, $6 # E :
addq $16, 64, $16 # E :
bge $4, $do_wh64 # U : U L U L
$trailquad:
......@@ -190,14 +176,14 @@ $trailquad:
beq $1, $trailbytes # U .. .. .. : U L U L : Only 0..7 bytes to go
$onequad:
EX( stq_u $31, 0($6) ) # .. .. .. L
EX( stq_u $31, 0($16) ) # .. .. .. L
subq $1, 1, $1 # .. .. E ..
subq $0, 8, $0 # .. E .. ..
nop # E .. .. .. : U L U L
nop # .. .. .. E
nop # .. .. E ..
addq $6, 8, $6 # .. E .. ..
addq $16, 8, $16 # .. E .. ..
bgt $1, $onequad # U .. .. .. : U L U L
# We have an unknown number of bytes left to go.
......@@ -211,9 +197,9 @@ $trailbytes:
# so we will use $0 as the loop counter
# We know for a fact that $0 > 0 zero due to previous context
$onebyte:
EX( stb $31, 0($6) ) # .. .. .. L
EX( stb $31, 0($16) ) # .. .. .. L
subq $0, 1, $0 # .. .. E .. :
addq $6, 1, $6 # .. E .. .. :
addq $16, 1, $16 # .. E .. .. :
bgt $0, $onebyte # U .. .. .. : U L U L
$zerolength:
......@@ -221,6 +207,6 @@ $exception: # Destination for exception recovery(?)
nop # .. .. .. E :
nop # .. .. E .. :
nop # .. E .. .. :
ret $31, ($28), 1 # L0 .. .. .. : L U L U
.end __do_clear_user
EXPORT_SYMBOL(__do_clear_user)
ret $31, ($26), 1 # L0 .. .. .. : L U L U
.end __clear_user
EXPORT_SYMBOL(__clear_user)
arch/alpha/lib/ev6-copy_user.S
View file @ 5db6db0d
......@@ -12,21 +12,6 @@
* only _after_ a successful copy). There is also some rather minor
* exception setup stuff..
*
* NOTE! This is not directly C-callable, because the calling semantics are
* different:
*
* Inputs:
* length in $0
* destination address in $6
* source address in $7
* return address in $28
*
* Outputs:
* bytes left to copy in $0
*
* Clobbers:
* $1,$2,$3,$4,$5,$6,$7
*
* Much of the information about 21264 scheduling/coding comes from:
* Compiler Writer's Guide for the Alpha 21264
* abbreviated as 'CWG' in other comments here
......@@ -60,10 +45,11 @@
# Pipeline info: Slotting & Comments
__copy_user:
.prologue 0
subq $0, 32, $1 # .. E .. .. : Is this going to be a small copy?
andq $18, $18, $0
subq $18, 32, $1 # .. E .. .. : Is this going to be a small copy?
beq $0, $zerolength # U .. .. .. : U L U L
and $6,7,$3 # .. .. .. E : is leading dest misalignment
and $16,7,$3 # .. .. .. E : is leading dest misalignment
ble $1, $onebyteloop # .. .. U .. : 1st branch : small amount of data
beq $3, $destaligned # .. U .. .. : 2nd (one cycle fetcher stall)
subq $3, 8, $3 # E .. .. .. : L U U L : trip counter
......@@ -73,17 +59,17 @@ __copy_user:
* We know we have at least one trip through this loop
*/
$aligndest:
EXI( ldbu $1,0($7) ) # .. .. .. L : Keep loads separate from stores
addq $6,1,$6 # .. .. E .. : Section 3.8 in the CWG
EXI( ldbu $1,0($17) ) # .. .. .. L : Keep loads separate from stores
addq $16,1,$16 # .. .. E .. : Section 3.8 in the CWG
addq $3,1,$3 # .. E .. .. :
nop # E .. .. .. : U L U L
/*
* the -1 is to compensate for the inc($6) done in a previous quadpack
* the -1 is to compensate for the inc($16) done in a previous quadpack
* which allows us zero dependencies within either quadpack in the loop
*/
EXO( stb $1,-1($6) ) # .. .. .. L :
addq $7,1,$7 # .. .. E .. : Section 3.8 in the CWG
EXO( stb $1,-1($16) ) # .. .. .. L :
addq $17,1,$17 # .. .. E .. : Section 3.8 in the CWG
subq $0,1,$0 # .. E .. .. :
bne $3, $aligndest # U .. .. .. : U L U L
......@@ -92,29 +78,29 @@ $aligndest:
* If we arrived via branch, we have a minimum of 32 bytes
*/
$destaligned:
and $7,7,$1 # .. .. .. E : Check _current_ source alignment
and $17,7,$1 # .. .. .. E : Check _current_ source alignment
bic $0,7,$4 # .. .. E .. : number bytes as a quadword loop
EXI( ldq_u $3,0($7) ) # .. L .. .. : Forward fetch for fallthrough code
EXI( ldq_u $3,0($17) ) # .. L .. .. : Forward fetch for fallthrough code
beq $1,$quadaligned # U .. .. .. : U L U L
/*
* In the worst case, we've just executed an ldq_u here from 0($7)
* In the worst case, we've just executed an ldq_u here from 0($17)
* and we'll repeat it once if we take the branch
*/
/* Misaligned quadword loop - not unrolled. Leave it that way. */
$misquad:
EXI( ldq_u $2,8($7) ) # .. .. .. L :
EXI( ldq_u $2,8($17) ) # .. .. .. L :
subq $4,8,$4 # .. .. E .. :
extql $3,$7,$3 # .. U .. .. :
extqh $2,$7,$1 # U .. .. .. : U U L L
extql $3,$17,$3 # .. U .. .. :
extqh $2,$17,$1 # U .. .. .. : U U L L
bis $3,$1,$1 # .. .. .. E :
EXO( stq $1,0($6) ) # .. .. L .. :
addq $7,8,$7 # .. E .. .. :
EXO( stq $1,0($16) ) # .. .. L .. :
addq $17,8,$17 # .. E .. .. :
subq $0,8,$0 # E .. .. .. : U L L U
addq $6,8,$6 # .. .. .. E :
addq $16,8,$16 # .. .. .. E :
bis $2,$2,$3 # .. .. E .. :
nop # .. E .. .. :
bne $4,$misquad # U .. .. .. : U L U L
......@@ -125,8 +111,8 @@ $misquad:
beq $0,$zerolength # U .. .. .. : U L U L
/* We know we have at least one trip through the byte loop */
EXI ( ldbu $2,0($7) ) # .. .. .. L : No loads in the same quad
addq $6,1,$6 # .. .. E .. : as the store (Section 3.8 in CWG)
EXI ( ldbu $2,0($17) ) # .. .. .. L : No loads in the same quad
addq $16,1,$16 # .. .. E .. : as the store (Section 3.8 in CWG)
nop # .. E .. .. :
br $31, $dirtyentry # L0 .. .. .. : L U U L
/* Do the trailing byte loop load, then hop into the store part of the loop */
......@@ -136,8 +122,8 @@ $misquad:
* Based upon the usage context, it's worth the effort to unroll this loop
* $0 - number of bytes to be moved
* $4 - number of bytes to move as quadwords
* $6 is current destination address
* $7 is current source address
* $16 is current destination address
* $17 is current source address
*/
$quadaligned:
subq $4, 32, $2 # .. .. .. E : do not unroll for small stuff
......@@ -155,29 +141,29 @@ $quadaligned:
* instruction memory hint instruction).
*/
$unroll4:
EXI( ldq $1,0($7) ) # .. .. .. L
EXI( ldq $2,8($7) ) # .. .. L ..
EXI( ldq $1,0($17) ) # .. .. .. L
EXI( ldq $2,8($17) ) # .. .. L ..
subq $4,32,$4 # .. E .. ..
nop # E .. .. .. : U U L L
addq $7,16,$7 # .. .. .. E
EXO( stq $1,0($6) ) # .. .. L ..
EXO( stq $2,8($6) ) # .. L .. ..
addq $17,16,$17 # .. .. .. E
EXO( stq $1,0($16) ) # .. .. L ..
EXO( stq $2,8($16) ) # .. L .. ..
subq $0,16,$0 # E .. .. .. : U L L U
addq $6,16,$6 # .. .. .. E
EXI( ldq $1,0($7) ) # .. .. L ..
EXI( ldq $2,8($7) ) # .. L .. ..
addq $16,16,$16 # .. .. .. E
EXI( ldq $1,0($17) ) # .. .. L ..
EXI( ldq $2,8($17) ) # .. L .. ..
subq $4, 32, $3 # E .. .. .. : U U L L : is there enough for another trip?
EXO( stq $1,0($6) ) # .. .. .. L
EXO( stq $2,8($6) ) # .. .. L ..
EXO( stq $1,0($16) ) # .. .. .. L
EXO( stq $2,8($16) ) # .. .. L ..
subq $0,16,$0 # .. E .. ..
addq $7,16,$7 # E .. .. .. : U L L U
addq $17,16,$17 # E .. .. .. : U L L U
nop # .. .. .. E
nop # .. .. E ..
addq $6,16,$6 # .. E .. ..
addq $16,16,$16 # .. E .. ..
bgt $3,$unroll4 # U .. .. .. : U L U L
nop
......@@ -186,14 +172,14 @@ $unroll4:
beq $4, $noquads
$onequad:
EXI( ldq $1,0($7) )
EXI( ldq $1,0($17) )
subq $4,8,$4
addq $7,8,$7
addq $17,8,$17
nop
EXO( stq $1,0($6) )
EXO( stq $1,0($16) )
subq $0,8,$0
addq $6,8,$6
addq $16,8,$16
bne $4,$onequad
$noquads:
......@@ -207,23 +193,23 @@ $noquads:
* There's no point in doing a lot of complex alignment calculations to try to
* to quadword stuff for a small amount of data.
* $0 - remaining number of bytes left to copy
* $6 - current dest addr
* $7 - current source addr
* $16 - current dest addr
* $17 - current source addr
*/
$onebyteloop:
EXI ( ldbu $2,0($7) ) # .. .. .. L : No loads in the same quad
addq $6,1,$6 # .. .. E .. : as the store (Section 3.8 in CWG)
EXI ( ldbu $2,0($17) ) # .. .. .. L : No loads in the same quad
addq $16,1,$16 # .. .. E .. : as the store (Section 3.8 in CWG)
nop # .. E .. .. :
nop # E .. .. .. : U L U L
$dirtyentry:
/*
* the -1 is to compensate for the inc($6) done in a previous quadpack
* the -1 is to compensate for the inc($16) done in a previous quadpack
* which allows us zero dependencies within either quadpack in the loop
*/
EXO ( stb $2,-1($6) ) # .. .. .. L :
addq $7,1,$7 # .. .. E .. : quadpack as the load
EXO ( stb $2,-1($16) ) # .. .. .. L :
addq $17,1,$17 # .. .. E .. : quadpack as the load
subq $0,1,$0 # .. E .. .. : change count _after_ copy
bgt $0,$onebyteloop # U .. .. .. : U L U L
......@@ -233,7 +219,7 @@ $exitout: # Destination for exception recovery(?)
nop # .. .. .. E
nop # .. .. E ..
nop # .. E .. ..
ret $31,($28),1 # L0 .. .. .. : L U L U
ret $31,($26),1 # L0 .. .. .. : L U L U
.end __copy_user
EXPORT_SYMBOL(__copy_user)
arch/arc/include/asm/Kbuild
View file @ 5db6db0d
......@@ -6,6 +6,7 @@ generic-y += device.h
generic-y += div64.h
generic-y += emergency-restart.h
generic-y += errno.h
generic-y += extable.h
generic-y += fb.h
generic-y += fcntl.h
generic-y += ftrace.h
......
arch/arc/include/asm/uaccess.h
View file @ 5db6db0d
......@@ -24,12 +24,10 @@
#ifndef _ASM_ARC_UACCESS_H
#define _ASM_ARC_UACCESS_H
#include <linux/sched.h>
#include <asm/errno.h>
#include <linux/string.h> /* for generic string functions */
#define __kernel_ok (segment_eq(get_fs(), KERNEL_DS))
#define __kernel_ok (uaccess_kernel())
/*
* Algorithmically, for __user_ok() we want do:
......@@ -170,7 +168,7 @@
static inline unsigned long
__arc_copy_from_user(void *to, const void __user *from, unsigned long n)
raw_copy_from_user(void *to, const void __user *from, unsigned long n)
{
long res = 0;
char val;
......@@ -396,11 +394,8 @@ __arc_copy_from_user(void *to, const void __user *from, unsigned long n)
return res;
}
extern unsigned long slowpath_copy_to_user(void __user *to, const void *from,
unsigned long n);
static inline unsigned long
__arc_copy_to_user(void __user *to, const void *from, unsigned long n)
raw_copy_to_user(void __user *to, const void *from, unsigned long n)
{
long res = 0;
char val;
......@@ -726,24 +721,20 @@ static inline long __arc_strnlen_user(const char __user *s, long n)
}
#ifndef CONFIG_CC_OPTIMIZE_FOR_SIZE
#define __copy_from_user(t, f, n) __arc_copy_from_user(t, f, n)
#define __copy_to_user(t, f, n) __arc_copy_to_user(t, f, n)
#define INLINE_COPY_TO_USER
#define INLINE_COPY_FROM_USER
#define __clear_user(d, n) __arc_clear_user(d, n)
#define __strncpy_from_user(d, s, n) __arc_strncpy_from_user(d, s, n)
#define __strnlen_user(s, n) __arc_strnlen_user(s, n)
#else
extern long arc_copy_from_user_noinline(void *to, const void __user * from,
unsigned long n);
extern long arc_copy_to_user_noinline(void __user *to, const void *from,
unsigned long n);
extern unsigned long arc_clear_user_noinline(void __user *to,
unsigned long n);
extern long arc_strncpy_from_user_noinline (char *dst, const char __user *src,
long count);
extern long arc_strnlen_user_noinline(const char __user *src, long n);
#define __copy_from_user(t, f, n) arc_copy_from_user_noinline(t, f, n)
#define __copy_to_user(t, f, n) arc_copy_to_user_noinline(t, f, n)
#define __clear_user(d, n) arc_clear_user_noinline(d, n)
#define __strncpy_from_user(d, s, n) arc_strncpy_from_user_noinline(d, s, n)
#define __strnlen_user(s, n) arc_strnlen_user_noinline(s, n)
......@@ -752,6 +743,4 @@ extern long arc_strnlen_user_noinline(const char __user *src, long n);
#include <asm-generic/uaccess.h>
extern int fixup_exception(struct pt_regs *regs);
#endif
arch/arc/mm/extable.c
View file @ 5db6db0d
......@@ -28,20 +28,6 @@ int fixup_exception(struct pt_regs *regs)
#ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
long arc_copy_from_user_noinline(void *to, const void __user *from,
unsigned long n)
{
return __arc_copy_from_user(to, from, n);
}
EXPORT_SYMBOL(arc_copy_from_user_noinline);
long arc_copy_to_user_noinline(void __user *to, const void *from,
unsigned long n)
{
return __arc_copy_to_user(to, from, n);
}
EXPORT_SYMBOL(arc_copy_to_user_noinline);
unsigned long arc_clear_user_noinline(void __user *to,
unsigned long n)
{
......
arch/arm/Kconfig
View file @ 5db6db0d
......@@ -41,7 +41,6 @@ config ARM
select HARDIRQS_SW_RESEND
select HAVE_ARCH_AUDITSYSCALL if (AEABI && !OABI_COMPAT)
select HAVE_ARCH_BITREVERSE if (CPU_32v7M || CPU_32v7) && !CPU_32v6
select HAVE_ARCH_HARDENED_USERCOPY
select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL && !CPU_ENDIAN_BE32 && MMU
select HAVE_ARCH_KGDB if !CPU_ENDIAN_BE32 && MMU
select HAVE_ARCH_MMAP_RND_BITS if MMU
......
arch/arm/include/asm/Kbuild
View file @ 5db6db0d
......@@ -7,6 +7,7 @@ generic-y += early_ioremap.h
generic-y += emergency-restart.h
generic-y += errno.h
generic-y += exec.h
generic-y += extable.h
generic-y += ioctl.h
generic-y += ipcbuf.h
generic-y += irq_regs.h
......
arch/arm/include/asm/uaccess.h
View file @ 5db6db0d
......@@ -12,8 +12,6 @@
* User space memory access functions
*/
#include <linux/string.h>
#include <linux/thread_info.h>
#include <asm/errno.h>
#include <asm/memory.h>
#include <asm/domain.h>
#include <asm/unified.h>
......@@ -26,28 +24,7 @@
#define __put_user_unaligned __put_user
#endif
#define VERIFY_READ 0
#define VERIFY_WRITE 1
/*
* The exception table consists of pairs of addresses: the first is the
* address of an instruction that is allowed to fault, and the second is
* the address at which the program should continue. No registers are
* modified, so it is entirely up to the continuation code to figure out
* what to do.
*
* All the routines below use bits of fixup code that are out of line
* with the main instruction path. This means when everything is well,
* we don't even have to jump over them. Further, they do not intrude
* on our cache or tlb entries.
*/
struct exception_table_entry
{
unsigned long insn, fixup;
};
extern int fixup_exception(struct pt_regs *regs);
#include <asm/extable.h>
/*
* These two functions allow hooking accesses to userspace to increase
......@@ -271,7 +248,7 @@ static inline void set_fs(mm_segment_t fs)
#define access_ok(type, addr, size) (__range_ok(addr, size) == 0)
#define user_addr_max() \
(segment_eq(get_fs(), KERNEL_DS) ? ~0UL : get_fs())
(uaccess_kernel() ? ~0UL : get_fs())
/*
* The "__xxx" versions of the user access functions do not verify the
......@@ -478,7 +455,7 @@ extern unsigned long __must_check
arm_copy_from_user(void *to, const void __user *from, unsigned long n);
static inline unsigned long __must_check
__arch_copy_from_user(void *to, const void __user *from, unsigned long n)
raw_copy_from_user(void *to, const void __user *from, unsigned long n)
{
unsigned int __ua_flags;
......@@ -494,7 +471,7 @@ extern unsigned long __must_check
__copy_to_user_std(void __user *to, const void *from, unsigned long n);
static inline unsigned long __must_check
__arch_copy_to_user(void __user *to, const void *from, unsigned long n)
raw_copy_to_user(void __user *to, const void *from, unsigned long n)
{
#ifndef CONFIG_UACCESS_WITH_MEMCPY
unsigned int __ua_flags;
......@@ -522,54 +499,22 @@ __clear_user(void __user *addr, unsigned long n)
}
#else
#define __arch_copy_from_user(to, from, n) \
(memcpy(to, (void __force *)from, n), 0)
#define __arch_copy_to_user(to, from, n) \
(memcpy((void __force *)to, from, n), 0)
#define __clear_user(addr, n) (memset((void __force *)addr, 0, n), 0)
#endif
static inline unsigned long __must_check
__copy_from_user(void *to, const void __user *from, unsigned long n)
{
check_object_size(to, n, false);
return __arch_copy_from_user(to, from, n);
}
static inline unsigned long __must_check
copy_from_user(void *to, const void __user *from, unsigned long n)
{
unsigned long res = n;
check_object_size(to, n, false);
if (likely(access_ok(VERIFY_READ, from, n)))
res = __arch_copy_from_user(to, from, n);
if (unlikely(res))
memset(to + (n - res), 0, res);
return res;
}
static inline unsigned long __must_check
__copy_to_user(void __user *to, const void *from, unsigned long n)
static inline unsigned long
raw_copy_from_user(void *to, const void __user *from, unsigned long n)
{
check_object_size(from, n, true);
return __arch_copy_to_user(to, from, n);
memcpy(to, (const void __force *)from, n);
return 0;
}
static inline unsigned long __must_check
copy_to_user(void __user *to, const void *from, unsigned long n)
static inline unsigned long
raw_copy_to_user(void __user *to, const void *from, unsigned long n)
{
check_object_size(from, n, true);
if (access_ok(VERIFY_WRITE, to, n))
n = __arch_copy_to_user(to, from, n);
return n;
memcpy((void __force *)to, from, n);
return 0;
}
#define __copy_to_user_inatomic __copy_to_user
#define __copy_from_user_inatomic __copy_from_user
#define __clear_user(addr, n) (memset((void __force *)addr, 0, n), 0)
#endif
#define INLINE_COPY_TO_USER
#define INLINE_COPY_FROM_USER
static inline unsigned long __must_check clear_user(void __user *to, unsigned long n)
{
......
arch/arm/lib/uaccess_with_memcpy.c
View file @ 5db6db0d
......@@ -90,7 +90,7 @@ __copy_to_user_memcpy(void __user *to, const void *from, unsigned long n)
unsigned long ua_flags;
int atomic;
if (unlikely(segment_eq(get_fs(), KERNEL_DS))) {
if (uaccess_kernel()) {
memcpy((void *)to, from, n);
return 0;
}
......@@ -162,7 +162,7 @@ __clear_user_memset(void __user *addr, unsigned long n)
{
unsigned long ua_flags;
if (unlikely(segment_eq(get_fs(), KERNEL_DS))) {
if (uaccess_kernel()) {
memset((void *)addr, 0, n);
return 0;
}
......
arch/arm64/Kconfig
View file @ 5db6db0d
......@@ -60,7 +60,6 @@ config ARM64
select HAVE_ALIGNED_STRUCT_PAGE if SLUB
select HAVE_ARCH_AUDITSYSCALL
select HAVE_ARCH_BITREVERSE
select HAVE_ARCH_HARDENED_USERCOPY
select HAVE_ARCH_HUGE_VMAP
select HAVE_ARCH_JUMP_LABEL
select HAVE_ARCH_KASAN if SPARSEMEM_VMEMMAP && !(ARM64_16K_PAGES && ARM64_VA_BITS_48)
......
arch/arm64/include/asm/extable.h 0 → 100644
View file @ 5db6db0d
#ifndef __ASM_EXTABLE_H
#define __ASM_EXTABLE_H
/*
* The exception table consists of pairs of relative offsets: the first
* is the relative offset to an instruction that is allowed to fault,
* and the second is the relative offset at which the program should
* continue. No registers are modified, so it is entirely up to the
* continuation code to figure out what to do.
*
* All the routines below use bits of fixup code that are out of line
* with the main instruction path. This means when everything is well,
* we don't even have to jump over them. Further, they do not intrude
* on our cache or tlb entries.
*/
struct exception_table_entry
{
int insn, fixup;
};
#define ARCH_HAS_RELATIVE_EXTABLE
extern int fixup_exception(struct pt_regs *regs);
#endif
arch/arm64/include/asm/uaccess.h
View file @ 5db6db0d
......@@ -28,38 +28,12 @@
#include <linux/bitops.h>
#include <linux/kasan-checks.h>
#include <linux/string.h>
#include <linux/thread_info.h>
#include <asm/cpufeature.h>
#include <asm/ptrace.h>
#include <asm/errno.h>
#include <asm/memory.h>
#include <asm/compiler.h>
#define VERIFY_READ 0
#define VERIFY_WRITE 1
/*
* The exception table consists of pairs of relative offsets: the first
* is the relative offset to an instruction that is allowed to fault,
* and the second is the relative offset at which the program should
* continue. No registers are modified, so it is entirely up to the
* continuation code to figure out what to do.
*
* All the routines below use bits of fixup code that are out of line
* with the main instruction path. This means when everything is well,
* we don't even have to jump over them. Further, they do not intrude
* on our cache or tlb entries.
*/
struct exception_table_entry
{
int insn, fixup;
};
#define ARCH_HAS_RELATIVE_EXTABLE
extern int fixup_exception(struct pt_regs *regs);
#include <asm/extable.h>
#define KERNEL_DS (-1UL)
#define get_ds() (KERNEL_DS)
......@@ -357,58 +331,13 @@ do { \
})
extern unsigned long __must_check __arch_copy_from_user(void *to, const void __user *from, unsigned long n);
#define raw_copy_from_user __arch_copy_from_user
extern unsigned long __must_check __arch_copy_to_user(void __user *to, const void *from, unsigned long n);
extern unsigned long __must_check __copy_in_user(void __user *to, const void __user *from, unsigned long n);
#define raw_copy_to_user __arch_copy_to_user
extern unsigned long __must_check raw_copy_in_user(void __user *to, const void __user *from, unsigned long n);
extern unsigned long __must_check __clear_user(void __user *addr, unsigned long n);
static inline unsigned long __must_check __copy_from_user(void *to, const void __user *from, unsigned long n)
{
kasan_check_write(to, n);
check_object_size(to, n, false);
return __arch_copy_from_user(to, from, n);
}
static inline unsigned long __must_check __copy_to_user(void __user *to, const void *from, unsigned long n)
{
kasan_check_read(from, n);
check_object_size(from, n, true);
return __arch_copy_to_user(to, from, n);
}
static inline unsigned long __must_check copy_from_user(void *to, const void __user *from, unsigned long n)
{
unsigned long res = n;
kasan_check_write(to, n);
check_object_size(to, n, false);
if (access_ok(VERIFY_READ, from, n)) {
res = __arch_copy_from_user(to, from, n);
}
if (unlikely(res))
memset(to + (n - res), 0, res);
return res;
}
static inline unsigned long __must_check copy_to_user(void __user *to, const void *from, unsigned long n)
{
kasan_check_read(from, n);
check_object_size(from, n, true);
if (access_ok(VERIFY_WRITE, to, n)) {
n = __arch_copy_to_user(to, from, n);
}
return n;
}
static inline unsigned long __must_check copy_in_user(void __user *to, const void __user *from, unsigned long n)
{
if (access_ok(VERIFY_READ, from, n) && access_ok(VERIFY_WRITE, to, n))
n = __copy_in_user(to, from, n);
return n;
}
#define __copy_to_user_inatomic __copy_to_user
#define __copy_from_user_inatomic __copy_from_user
#define INLINE_COPY_TO_USER
#define INLINE_COPY_FROM_USER
static inline unsigned long __must_check clear_user(void __user *to, unsigned long n)
{
......
arch/arm64/kernel/arm64ksyms.c
View file @ 5db6db0d
......@@ -38,7 +38,7 @@ EXPORT_SYMBOL(clear_page);
EXPORT_SYMBOL(__arch_copy_from_user);
EXPORT_SYMBOL(__arch_copy_to_user);
EXPORT_SYMBOL(__clear_user);
EXPORT_SYMBOL(__copy_in_user);
EXPORT_SYMBOL(raw_copy_in_user);
/* physical memory */
EXPORT_SYMBOL(memstart_addr);
......
arch/arm64/lib/copy_in_user.S
View file @ 5db6db0d
......@@ -64,14 +64,14 @@
.endm
end .req x5
ENTRY(__copy_in_user)
ENTRY(raw_copy_in_user)
uaccess_enable_not_uao x3, x4
add end, x0, x2
#include "copy_template.S"
uaccess_disable_not_uao x3
mov x0, #0
ret
ENDPROC(__copy_in_user)
ENDPROC(raw_copy_in_user)
.section .fixup,"ax"
.align 2
......
arch/avr32/include/asm/Kbuild
View file @ 5db6db0d
......@@ -5,6 +5,7 @@ generic-y += device.h
generic-y += div64.h
generic-y += emergency-restart.h
generic-y += exec.h
generic-y += extable.h
generic-y += futex.h
generic-y += irq_regs.h
generic-y += irq_work.h
......
arch/avr32/include/asm/uaccess.h
View file @ 5db6db0d
......@@ -8,12 +8,6 @@
#ifndef __ASM_AVR32_UACCESS_H
#define __ASM_AVR32_UACCESS_H
#include <linux/errno.h>
#include <linux/sched.h>
#define VERIFY_READ 0
#define VERIFY_WRITE 1
typedef struct {
unsigned int is_user_space;
} mm_segment_t;
......@@ -72,34 +66,18 @@ static inline void set_fs(mm_segment_t s)
extern __kernel_size_t __copy_user(void *to, const void *from,
__kernel_size_t n);
extern __kernel_size_t copy_to_user(void __user *to, const void *from,
__kernel_size_t n);
extern __kernel_size_t ___copy_from_user(void *to, const void __user *from,
__kernel_size_t n);
static inline __kernel_size_t __copy_to_user(void __user *to, const void *from,
__kernel_size_t n)
static inline unsigned long
raw_copy_to_user(void __user *to, const void *from, unsigned long n)
{
return __copy_user((void __force *)to, from, n);
}
static inline __kernel_size_t __copy_from_user(void *to,
const void __user *from,
__kernel_size_t n)
static inline unsigned long
raw_copy_from_user(void *to, const void __user *from, unsigned long n)
{
return __copy_user(to, (const void __force *)from, n);
}
static inline __kernel_size_t copy_from_user(void *to,
const void __user *from,
__kernel_size_t n)
{
size_t res = ___copy_from_user(to, from, n);
if (unlikely(res))
memset(to + (n - res), 0, res);
return res;
}
#define __copy_to_user_inatomic __copy_to_user
#define __copy_from_user_inatomic __copy_from_user
#define INLINE_COPY_FROM_USER
#define INLINE_COPY_TO_USER
/*
* put_user: - Write a simple value into user space.
......@@ -329,9 +307,6 @@ extern long __strnlen_user(const char __user *__s, long __n);
#define strlen_user(s) strnlen_user(s, ~0UL >> 1)
struct exception_table_entry
{
unsigned long insn, fixup;
};
#include <asm/extable.h>
#endif /* __ASM_AVR32_UACCESS_H */
arch/avr32/kernel/avr32_ksyms.c
View file @ 5db6db0d
......@@ -36,8 +36,6 @@ EXPORT_SYMBOL(copy_page);
/*
* Userspace access stuff.
*/
EXPORT_SYMBOL(___copy_from_user);
EXPORT_SYMBOL(copy_to_user);
EXPORT_SYMBOL(__copy_user);
EXPORT_SYMBOL(strncpy_from_user);
EXPORT_SYMBOL(__strncpy_from_user);
......
arch/avr32/lib/copy_user.S
View file @ 5db6db0d
......@@ -23,21 +23,6 @@
*/
.text
.align 1
.global ___copy_from_user
.type ___copy_from_user, @function
___copy_from_user:
branch_if_kernel r8, __copy_user
ret_if_privileged r8, r11, r10, r10
rjmp __copy_user
.size ___copy_from_user, . - ___copy_from_user
.global copy_to_user
.type copy_to_user, @function
copy_to_user:
branch_if_kernel r8, __copy_user
ret_if_privileged r8, r12, r10, r10
.size copy_to_user, . - copy_to_user
.global __copy_user
.type __copy_user, @function
__copy_user:
......
arch/blackfin/include/asm/Kbuild
View file @ 5db6db0d
......@@ -7,6 +7,7 @@ generic-y += device.h
generic-y += div64.h
generic-y += emergency-restart.h
generic-y += errno.h
generic-y += extable.h
generic-y += fb.h
generic-y += futex.h
generic-y += hw_irq.h
......
arch/blackfin/include/asm/uaccess.h
View file @ 5db6db0d
......@@ -12,7 +12,6 @@
/*
* User space memory access functions
*/
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/string.h>
......@@ -29,9 +28,6 @@ static inline void set_fs(mm_segment_t fs)
#define segment_eq(a, b) ((a) == (b))
#define VERIFY_READ 0
#define VERIFY_WRITE 1
#define access_ok(type, addr, size) _access_ok((unsigned long)(addr), (size))
/*
......@@ -46,22 +42,7 @@ static inline int _access_ok(unsigned long addr, unsigned long size) { return 1;
extern int _access_ok(unsigned long addr, unsigned long size);
#endif
/*
* The exception table consists of pairs of addresses: the first is the
* address of an instruction that is allowed to fault, and the second is
* the address at which the program should continue. No registers are
* modified, so it is entirely up to the continuation code to figure out
* what to do.
*
* All the routines below use bits of fixup code that are out of line
* with the main instruction path. This means when everything is well,
* we don't even have to jump over them. Further, they do not intrude
* on our cache or tlb entries.
*/
struct exception_table_entry {
unsigned long insn, fixup;
};
#include <asm/extable.h>
/*
* These are the main single-value transfer routines. They automatically
......@@ -163,41 +144,23 @@ static inline int bad_user_access_length(void)
: "a" (__ptr(ptr))); \
})
#define __copy_to_user_inatomic __copy_to_user
#define __copy_from_user_inatomic __copy_from_user
static inline unsigned long __must_check
__copy_from_user(void *to, const void __user *from, unsigned long n)
raw_copy_from_user(void *to, const void __user *from, unsigned long n)
{
memcpy(to, (const void __force *)from, n);
return 0;
}
static inline unsigned long __must_check
__copy_to_user(void __user *to, const void *from, unsigned long n)
raw_copy_to_user(void __user *to, const void *from, unsigned long n)
{
memcpy((void __force *)to, from, n);
SSYNC();
return 0;
}
static inline unsigned long __must_check
copy_from_user(void *to, const void __user *from, unsigned long n)
{
if (likely(access_ok(VERIFY_READ, from, n)))
return __copy_from_user(to, from, n);
memset(to, 0, n);
return n;
}
static inline unsigned long __must_check
copy_to_user(void __user *to, const void *from, unsigned long n)
{
if (likely(access_ok(VERIFY_WRITE, to, n)))
return __copy_to_user(to, from, n);
return n;
}
#define INLINE_COPY_FROM_USER
#define INLINE_COPY_TO_USER
/*
* Copy a null terminated string from userspace.
*/
......
arch/blackfin/kernel/process.c
View file @ 5db6db0d
......@@ -370,7 +370,7 @@ int _access_ok(unsigned long addr, unsigned long size)
/* Check that things do not wrap around */
if (addr > ULONG_MAX - size)
return 0;
if (segment_eq(get_fs(), KERNEL_DS))
if (uaccess_kernel())
return 1;
#ifdef CONFIG_MTD_UCLINUX
if (1)
......
arch/c6x/include/asm/Kbuild
View file @ 5db6db0d
......@@ -12,6 +12,7 @@ generic-y += dma.h
generic-y += emergency-restart.h
generic-y += errno.h
generic-y += exec.h
generic-y += extable.h
generic-y += fb.h
generic-y += fcntl.h
generic-y += futex.h
......
arch/c6x/include/asm/uaccess.h
View file @ 5db6db0d
......@@ -13,17 +13,11 @@
#include <linux/compiler.h>
#include <linux/string.h>
#ifdef CONFIG_ACCESS_CHECK
#define __access_ok _access_ok
#endif
/*
* __copy_from_user/copy_to_user are based on ones in asm-generic/uaccess.h
*
* C6X supports unaligned 32 and 64 bit loads and stores.
*/
static inline __must_check long __copy_from_user(void *to,
const void __user *from, unsigned long n)
static inline __must_check unsigned long
raw_copy_from_user(void *to, const void __user *from, unsigned long n)
{
u32 tmp32;
u64 tmp64;
......@@ -58,8 +52,8 @@ static inline __must_check long __copy_from_user(void *to,
return 0;
}
static inline __must_check long __copy_to_user(void __user *to,
const void *from, unsigned long n)
static inline __must_check unsigned long
raw_copy_to_user(void __user *to, const void *from, unsigned long n)
{
u32 tmp32;
u64 tmp64;
......@@ -93,9 +87,8 @@ static inline __must_check long __copy_to_user(void __user *to,
memcpy((void __force *)to, from, n);
return 0;
}
#define __copy_to_user __copy_to_user
#define __copy_from_user __copy_from_user
#define INLINE_COPY_FROM_USER
#define INLINE_COPY_TO_USER
extern int _access_ok(unsigned long addr, unsigned long size);
#ifdef CONFIG_ACCESS_CHECK
......
arch/c6x/kernel/sys_c6x.c
View file @ 5db6db0d
......@@ -23,7 +23,7 @@ int _access_ok(unsigned long addr, unsigned long size)
if (!addr || addr > (0xffffffffUL - (size - 1)))
goto _bad_access;
if (segment_eq(get_fs(), KERNEL_DS))
if (uaccess_kernel())
return 1;
if (memory_start <= addr && (addr + size - 1) < memory_end)
......
arch/cris/arch-v10/lib/usercopy.c
View file @ 5db6db0d
......@@ -188,11 +188,10 @@ unsigned long __copy_user(void __user *pdst, const void *psrc, unsigned long pn)
}
EXPORT_SYMBOL(__copy_user);
/* Copy from user to kernel, zeroing the bytes that were inaccessible in
userland. The return-value is the number of bytes that were
/* Copy from user to kernel. The return-value is the number of bytes that were
inaccessible. */
unsigned long __copy_user_zeroing(void *pdst, const void __user *psrc,
unsigned long __copy_user_in(void *pdst, const void __user *psrc,
unsigned long pn)
{
/* We want the parameters put in special registers.
......@@ -217,19 +216,17 @@ unsigned long __copy_user_zeroing(void *pdst, const void __user *psrc,
{
__asm_copy_from_user_1 (dst, src, retn);
n--;
if (retn)
goto exception;
}
if (((unsigned long) src & 2) && n >= 2)
{
__asm_copy_from_user_2 (dst, src, retn);
n -= 2;
if (retn)
goto exception;
}
/* We only need one check after the unalignment-adjustments, because
if both adjustments were done, either both or neither reference
had an exception. */
if (retn != 0)
goto copy_exception_bytes;
}
/* Decide which copying method to use. */
......@@ -328,7 +325,7 @@ unsigned long __copy_user_zeroing(void *pdst, const void __user *psrc,
n -= 4;
if (retn)
goto copy_exception_bytes;
goto exception;
}
/* If we get here, there were no memory read faults. */
......@@ -356,20 +353,10 @@ unsigned long __copy_user_zeroing(void *pdst, const void __user *psrc,
bytes. */
return retn;
copy_exception_bytes:
/* We already have "retn" bytes cleared, and need to clear the
remaining "n" bytes. A non-optimized simple byte-for-byte in-line
memset is preferred here, since this isn't speed-critical code and
we'd rather have this a leaf-function than calling memset. */
{
char *endp;
for (endp = dst + n; dst < endp; dst++)
*dst = 0;
}
exception:
return retn + n;
}
EXPORT_SYMBOL(__copy_user_zeroing);
EXPORT_SYMBOL(__copy_user_in);
/* Zero userspace. */
unsigned long __do_clear_user(void __user *pto, unsigned long pn)
......
arch/cris/arch-v32/lib/usercopy.c
View file @ 5db6db0d
......@@ -156,10 +156,9 @@ unsigned long __copy_user(void __user *pdst, const void *psrc, unsigned long pn)
}
EXPORT_SYMBOL(__copy_user);
/* Copy from user to kernel, zeroing the bytes that were inaccessible in
userland. The return-value is the number of bytes that were
/* Copy from user to kernel. The return-value is the number of bytes that were
inaccessible. */
unsigned long __copy_user_zeroing(void *pdst, const void __user *psrc,
unsigned long __copy_user_in(void *pdst, const void __user *psrc,
unsigned long pn)
{
/* We want the parameters put in special registers.
......@@ -184,19 +183,18 @@ unsigned long __copy_user_zeroing(void *pdst, const void __user *psrc,
{
__asm_copy_from_user_1 (dst, src, retn);
n--;
if (retn != 0)
goto exception;
}
if (((unsigned long) src & 2) && n >= 2)
{
__asm_copy_from_user_2 (dst, src, retn);
n -= 2;
if (retn != 0)
goto exception;
}
/* We only need one check after the unalignment-adjustments, because
if both adjustments were done, either both or neither reference
had an exception. */
if (retn != 0)
goto copy_exception_bytes;
}
/* Movem is dirt cheap. The overheap is low enough to always use the
......@@ -279,7 +277,7 @@ unsigned long __copy_user_zeroing(void *pdst, const void __user *psrc,
n -= 4;
if (retn)
goto copy_exception_bytes;
goto exception;
}
/* If we get here, there were no memory read faults. */
......@@ -307,20 +305,10 @@ unsigned long __copy_user_zeroing(void *pdst, const void __user *psrc,
bytes. */
return retn;
copy_exception_bytes:
/* We already have "retn" bytes cleared, and need to clear the
remaining "n" bytes. A non-optimized simple byte-for-byte in-line
memset is preferred here, since this isn't speed-critical code and
we'd rather have this a leaf-function than calling memset. */
{
char *endp;
for (endp = dst + n; dst < endp; dst++)
*dst = 0;
}
exception:
return retn + n;
}
EXPORT_SYMBOL(__copy_user_zeroing);
EXPORT_SYMBOL(__copy_user_in);
/* Zero userspace. */
unsigned long __do_clear_user(void __user *pto, unsigned long pn)
......
arch/cris/include/arch-v10/arch/uaccess.h
View file @ 5db6db0d
......@@ -172,16 +172,14 @@ __do_strncpy_from_user(char *dst, const char *src, long count)
__asm_copy_user_cont(to, from, ret, \
" move.b [%1+],$r9\n" \
"2: move.b $r9,[%0+]\n", \
"3: addq 1,%2\n" \
" clear.b [%0+]\n", \
"3: addq 1,%2\n", \
" .dword 2b,3b\n")
#define __asm_copy_from_user_2x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
__asm_copy_user_cont(to, from, ret, \
" move.w [%1+],$r9\n" \
"2: move.w $r9,[%0+]\n" COPY, \
"3: addq 2,%2\n" \
" clear.w [%0+]\n" FIXUP, \
"3: addq 2,%2\n" FIXUP, \
" .dword 2b,3b\n" TENTRY)
#define __asm_copy_from_user_2(to, from, ret) \
......@@ -191,16 +189,14 @@ __do_strncpy_from_user(char *dst, const char *src, long count)
__asm_copy_from_user_2x_cont(to, from, ret, \
" move.b [%1+],$r9\n" \
"4: move.b $r9,[%0+]\n", \
"5: addq 1,%2\n" \
" clear.b [%0+]\n", \
"5: addq 1,%2\n", \
" .dword 4b,5b\n")
#define __asm_copy_from_user_4x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
__asm_copy_user_cont(to, from, ret, \
" move.d [%1+],$r9\n" \
"2: move.d $r9,[%0+]\n" COPY, \
"3: addq 4,%2\n" \
" clear.d [%0+]\n" FIXUP, \
"3: addq 4,%2\n" FIXUP, \
" .dword 2b,3b\n" TENTRY)
#define __asm_copy_from_user_4(to, from, ret) \
......@@ -210,8 +206,7 @@ __do_strncpy_from_user(char *dst, const char *src, long count)
__asm_copy_from_user_4x_cont(to, from, ret, \
" move.b [%1+],$r9\n" \
"4: move.b $r9,[%0+]\n", \
"5: addq 1,%2\n" \
" clear.b [%0+]\n", \
"5: addq 1,%2\n", \
" .dword 4b,5b\n")
#define __asm_copy_from_user_6x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
......@@ -219,7 +214,7 @@ __do_strncpy_from_user(char *dst, const char *src, long count)
" move.w [%1+],$r9\n" \
"4: move.w $r9,[%0+]\n" COPY, \
"5: addq 2,%2\n" \
" clear.w [%0+]\n" FIXUP, \
FIXUP, \
" .dword 4b,5b\n" TENTRY)
#define __asm_copy_from_user_6(to, from, ret) \
......@@ -229,8 +224,7 @@ __do_strncpy_from_user(char *dst, const char *src, long count)
__asm_copy_from_user_6x_cont(to, from, ret, \
" move.b [%1+],$r9\n" \
"6: move.b $r9,[%0+]\n", \
"7: addq 1,%2\n" \
" clear.b [%0+]\n", \
"7: addq 1,%2\n", \
" .dword 6b,7b\n")
#define __asm_copy_from_user_8x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
......@@ -238,7 +232,7 @@ __do_strncpy_from_user(char *dst, const char *src, long count)
" move.d [%1+],$r9\n" \
"4: move.d $r9,[%0+]\n" COPY, \
"5: addq 4,%2\n" \
" clear.d [%0+]\n" FIXUP, \
FIXUP, \
" .dword 4b,5b\n" TENTRY)
#define __asm_copy_from_user_8(to, from, ret) \
......@@ -248,8 +242,7 @@ __do_strncpy_from_user(char *dst, const char *src, long count)
__asm_copy_from_user_8x_cont(to, from, ret, \
" move.b [%1+],$r9\n" \
"6: move.b $r9,[%0+]\n", \
"7: addq 1,%2\n" \
" clear.b [%0+]\n", \
"7: addq 1,%2\n", \
" .dword 6b,7b\n")
#define __asm_copy_from_user_10x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
......@@ -257,7 +250,7 @@ __do_strncpy_from_user(char *dst, const char *src, long count)
" move.w [%1+],$r9\n" \
"6: move.w $r9,[%0+]\n" COPY, \
"7: addq 2,%2\n" \
" clear.w [%0+]\n" FIXUP, \
FIXUP, \
" .dword 6b,7b\n" TENTRY)
#define __asm_copy_from_user_10(to, from, ret) \
......@@ -267,8 +260,7 @@ __do_strncpy_from_user(char *dst, const char *src, long count)
__asm_copy_from_user_10x_cont(to, from, ret, \
" move.b [%1+],$r9\n" \
"8: move.b $r9,[%0+]\n", \
"9: addq 1,%2\n" \
" clear.b [%0+]\n", \
"9: addq 1,%2\n", \
" .dword 8b,9b\n")
#define __asm_copy_from_user_12x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
......@@ -276,7 +268,7 @@ __do_strncpy_from_user(char *dst, const char *src, long count)
" move.d [%1+],$r9\n" \
"6: move.d $r9,[%0+]\n" COPY, \
"7: addq 4,%2\n" \
" clear.d [%0+]\n" FIXUP, \
FIXUP, \
" .dword 6b,7b\n" TENTRY)
#define __asm_copy_from_user_12(to, from, ret) \
......@@ -286,8 +278,7 @@ __do_strncpy_from_user(char *dst, const char *src, long count)
__asm_copy_from_user_12x_cont(to, from, ret, \
" move.b [%1+],$r9\n" \
"8: move.b $r9,[%0+]\n", \
"9: addq 1,%2\n" \
" clear.b [%0+]\n", \
"9: addq 1,%2\n", \
" .dword 8b,9b\n")
#define __asm_copy_from_user_14x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
......@@ -295,7 +286,7 @@ __do_strncpy_from_user(char *dst, const char *src, long count)
" move.w [%1+],$r9\n" \
"8: move.w $r9,[%0+]\n" COPY, \
"9: addq 2,%2\n" \
" clear.w [%0+]\n" FIXUP, \
FIXUP, \
" .dword 8b,9b\n" TENTRY)
#define __asm_copy_from_user_14(to, from, ret) \
......@@ -305,8 +296,7 @@ __do_strncpy_from_user(char *dst, const char *src, long count)
__asm_copy_from_user_14x_cont(to, from, ret, \
" move.b [%1+],$r9\n" \
"10: move.b $r9,[%0+]\n", \
"11: addq 1,%2\n" \
" clear.b [%0+]\n", \
"11: addq 1,%2\n", \
" .dword 10b,11b\n")
#define __asm_copy_from_user_16x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
......@@ -314,7 +304,7 @@ __do_strncpy_from_user(char *dst, const char *src, long count)
" move.d [%1+],$r9\n" \
"8: move.d $r9,[%0+]\n" COPY, \
"9: addq 4,%2\n" \
" clear.d [%0+]\n" FIXUP, \
FIXUP, \
" .dword 8b,9b\n" TENTRY)
#define __asm_copy_from_user_16(to, from, ret) \
......@@ -325,7 +315,7 @@ __do_strncpy_from_user(char *dst, const char *src, long count)
" move.d [%1+],$r9\n" \
"10: move.d $r9,[%0+]\n" COPY, \
"11: addq 4,%2\n" \
" clear.d [%0+]\n" FIXUP, \
FIXUP, \
" .dword 10b,11b\n" TENTRY)
#define __asm_copy_from_user_20(to, from, ret) \
......@@ -336,7 +326,7 @@ __do_strncpy_from_user(char *dst, const char *src, long count)
" move.d [%1+],$r9\n" \
"12: move.d $r9,[%0+]\n" COPY, \
"13: addq 4,%2\n" \
" clear.d [%0+]\n" FIXUP, \
FIXUP, \
" .dword 12b,13b\n" TENTRY)
#define __asm_copy_from_user_24(to, from, ret) \
......
arch/cris/include/arch-v32/arch/uaccess.h
View file @ 5db6db0d
......@@ -178,8 +178,7 @@ __do_strncpy_from_user(char *dst, const char *src, long count)
"2: move.b [%1+],$acr\n" \
" move.b $acr,[%0+]\n", \
"3: addq 1,%2\n" \
" jump 1b\n" \
" clear.b [%0+]\n", \
" jump 1b\n", \
" .dword 2b,3b\n")
#define __asm_copy_from_user_2x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
......@@ -189,8 +188,7 @@ __do_strncpy_from_user(char *dst, const char *src, long count)
" move.w $acr,[%0+]\n", \
FIXUP \
"3: addq 2,%2\n" \
" jump 1b\n" \
" clear.w [%0+]\n", \
" jump 1b\n", \
TENTRY \
" .dword 2b,3b\n")
......@@ -201,8 +199,7 @@ __do_strncpy_from_user(char *dst, const char *src, long count)
__asm_copy_from_user_2x_cont(to, from, ret, \
"4: move.b [%1+],$acr\n" \
" move.b $acr,[%0+]\n", \
"5: addq 1,%2\n" \
" clear.b [%0+]\n", \
"5: addq 1,%2\n", \
" .dword 4b,5b\n")
#define __asm_copy_from_user_4x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
......@@ -212,8 +209,7 @@ __do_strncpy_from_user(char *dst, const char *src, long count)
" move.d $acr,[%0+]\n", \
FIXUP \
"3: addq 4,%2\n" \
" jump 1b\n" \
" clear.d [%0+]\n", \
" jump 1b\n", \
TENTRY \
" .dword 2b,3b\n")
......@@ -224,8 +220,7 @@ __do_strncpy_from_user(char *dst, const char *src, long count)
__asm_copy_from_user_4x_cont(to, from, ret, \
"4: move.b [%1+],$acr\n" \
" move.b $acr,[%0+]\n", \
"5: addq 1,%2\n" \
" clear.b [%0+]\n", \
"5: addq 1,%2\n", \
" .dword 4b,5b\n")
#define __asm_copy_from_user_6x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
......@@ -234,8 +229,7 @@ __do_strncpy_from_user(char *dst, const char *src, long count)
"4: move.w [%1+],$acr\n" \
" move.w $acr,[%0+]\n", \
FIXUP \
"5: addq 2,%2\n" \
" clear.w [%0+]\n", \
"5: addq 2,%2\n", \
TENTRY \
" .dword 4b,5b\n")
......@@ -246,8 +240,7 @@ __do_strncpy_from_user(char *dst, const char *src, long count)
__asm_copy_from_user_6x_cont(to, from, ret, \
"6: move.b [%1+],$acr\n" \
" move.b $acr,[%0+]\n", \
"7: addq 1,%2\n" \
" clear.b [%0+]\n", \
"7: addq 1,%2\n", \
" .dword 6b,7b\n")
#define __asm_copy_from_user_8x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
......@@ -256,8 +249,7 @@ __do_strncpy_from_user(char *dst, const char *src, long count)
"4: move.d [%1+],$acr\n" \
" move.d $acr,[%0+]\n", \
FIXUP \
"5: addq 4,%2\n" \
" clear.d [%0+]\n", \
"5: addq 4,%2\n", \
TENTRY \
" .dword 4b,5b\n")
......@@ -268,8 +260,7 @@ __do_strncpy_from_user(char *dst, const char *src, long count)
__asm_copy_from_user_8x_cont(to, from, ret, \
"6: move.b [%1+],$acr\n" \
" move.b $acr,[%0+]\n", \
"7: addq 1,%2\n" \
" clear.b [%0+]\n", \
"7: addq 1,%2\n", \
" .dword 6b,7b\n")
#define __asm_copy_from_user_10x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
......@@ -278,8 +269,7 @@ __do_strncpy_from_user(char *dst, const char *src, long count)
"6: move.w [%1+],$acr\n" \
" move.w $acr,[%0+]\n", \
FIXUP \
"7: addq 2,%2\n" \
" clear.w [%0+]\n", \
"7: addq 2,%2\n", \
TENTRY \
" .dword 6b,7b\n")
......@@ -290,8 +280,7 @@ __do_strncpy_from_user(char *dst, const char *src, long count)
__asm_copy_from_user_10x_cont(to, from, ret, \
"8: move.b [%1+],$acr\n" \
" move.b $acr,[%0+]\n", \
"9: addq 1,%2\n" \
" clear.b [%0+]\n", \
"9: addq 1,%2\n", \
" .dword 8b,9b\n")
#define __asm_copy_from_user_12x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
......@@ -300,8 +289,7 @@ __do_strncpy_from_user(char *dst, const char *src, long count)
"6: move.d [%1+],$acr\n" \
" move.d $acr,[%0+]\n", \
FIXUP \
"7: addq 4,%2\n" \
" clear.d [%0+]\n", \
"7: addq 4,%2\n", \
TENTRY \
" .dword 6b,7b\n")
......@@ -312,8 +300,7 @@ __do_strncpy_from_user(char *dst, const char *src, long count)
__asm_copy_from_user_12x_cont(to, from, ret, \
"8: move.b [%1+],$acr\n" \
" move.b $acr,[%0+]\n", \
"9: addq 1,%2\n" \
" clear.b [%0+]\n", \
"9: addq 1,%2\n", \
" .dword 8b,9b\n")
#define __asm_copy_from_user_14x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
......@@ -322,8 +309,7 @@ __do_strncpy_from_user(char *dst, const char *src, long count)
"8: move.w [%1+],$acr\n" \
" move.w $acr,[%0+]\n", \
FIXUP \
"9: addq 2,%2\n" \
" clear.w [%0+]\n", \
"9: addq 2,%2\n", \
TENTRY \
" .dword 8b,9b\n")
......@@ -334,8 +320,7 @@ __do_strncpy_from_user(char *dst, const char *src, long count)
__asm_copy_from_user_14x_cont(to, from, ret, \
"10: move.b [%1+],$acr\n" \
" move.b $acr,[%0+]\n", \
"11: addq 1,%2\n" \
" clear.b [%0+]\n", \
"11: addq 1,%2\n", \
" .dword 10b,11b\n")
#define __asm_copy_from_user_16x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
......@@ -344,8 +329,7 @@ __do_strncpy_from_user(char *dst, const char *src, long count)
"8: move.d [%1+],$acr\n" \
" move.d $acr,[%0+]\n", \
FIXUP \
"9: addq 4,%2\n" \
" clear.d [%0+]\n", \
"9: addq 4,%2\n", \
TENTRY \
" .dword 8b,9b\n")
......@@ -358,8 +342,7 @@ __do_strncpy_from_user(char *dst, const char *src, long count)
"10: move.d [%1+],$acr\n" \
" move.d $acr,[%0+]\n", \
FIXUP \
"11: addq 4,%2\n" \
" clear.d [%0+]\n", \
"11: addq 4,%2\n", \
TENTRY \
" .dword 10b,11b\n")
......@@ -372,8 +355,7 @@ __do_strncpy_from_user(char *dst, const char *src, long count)
"12: move.d [%1+],$acr\n" \
" move.d $acr,[%0+]\n", \
FIXUP \
"13: addq 4,%2\n" \
" clear.d [%0+]\n", \
"13: addq 4,%2\n", \
TENTRY \
" .dword 12b,13b\n")
......
arch/cris/include/asm/Kbuild
View file @ 5db6db0d
......@@ -9,6 +9,7 @@ generic-y += device.h
generic-y += div64.h
generic-y += errno.h
generic-y += exec.h
generic-y += extable.h
generic-y += emergency-restart.h
generic-y += fcntl.h
generic-y += futex.h
......
arch/cris/include/asm/uaccess.h
View file @ 5db6db0d
......@@ -15,15 +15,9 @@
#ifndef _CRIS_UACCESS_H
#define _CRIS_UACCESS_H
#ifndef __ASSEMBLY__
#include <linux/sched.h>
#include <linux/errno.h>
#include <asm/processor.h>
#include <asm/page.h>
#define VERIFY_READ 0
#define VERIFY_WRITE 1
/*
* The fs value determines whether argument validity checking should be
* performed or not. If get_fs() == USER_DS, checking is performed, with
......@@ -49,30 +43,14 @@
#define segment_eq(a, b) ((a).seg == (b).seg)
#define __kernel_ok (segment_eq(get_fs(), KERNEL_DS))
#define __kernel_ok (uaccess_kernel())
#define __user_ok(addr, size) \
(((size) <= TASK_SIZE) && ((addr) <= TASK_SIZE-(size)))
#define __access_ok(addr, size) (__kernel_ok || __user_ok((addr), (size)))
#define access_ok(type, addr, size) __access_ok((unsigned long)(addr), (size))
#include <arch/uaccess.h>
/*
* The exception table consists of pairs of addresses: the first is the
* address of an instruction that is allowed to fault, and the second is
* the address at which the program should continue. No registers are
* modified, so it is entirely up to the continuation code to figure out
* what to do.
*
* All the routines below use bits of fixup code that are out of line
* with the main instruction path. This means when everything is well,
* we don't even have to jump over them. Further, they do not intrude
* on our cache or tlb entries.
*/
struct exception_table_entry {
unsigned long insn, fixup;
};
#include <asm/extable.h>
/*
* These are the main single-value transfer routines. They automatically
......@@ -191,7 +169,7 @@ extern long __get_user_bad(void);
live in lib/usercopy.c */
extern unsigned long __copy_user(void __user *to, const void *from, unsigned long n);
extern unsigned long __copy_user_zeroing(void *to, const void __user *from, unsigned long n);
extern unsigned long __copy_user_in(void *to, const void __user *from, unsigned long n);
extern unsigned long __do_clear_user(void __user *to, unsigned long n);
static inline long
......@@ -258,7 +236,7 @@ __constant_copy_from_user(void *to, const void __user *from, unsigned long n)
else if (n == 24)
__asm_copy_from_user_24(to, from, ret);
else
ret = __copy_user_zeroing(to, from, n);
ret = __copy_user_in(to, from, n);
return ret;
}
......@@ -358,64 +336,33 @@ static inline size_t clear_user(void __user *to, size_t n)
return __do_clear_user(to, n);
}
static inline size_t copy_from_user(void *to, const void __user *from, size_t n)
static inline unsigned long
raw_copy_from_user(void *to, const void __user *from, unsigned long n)
{
if (unlikely(!access_ok(VERIFY_READ, from, n))) {
memset(to, 0, n);
return n;
}
if (__builtin_constant_p(n))
return __constant_copy_from_user(to, from, n);
else
return __copy_user_zeroing(to, from, n);
return __copy_user_in(to, from, n);
}
static inline size_t copy_to_user(void __user *to, const void *from, size_t n)
static inline unsigned long
raw_copy_to_user(void __user *to, const void *from, unsigned long n)
{
if (unlikely(!access_ok(VERIFY_WRITE, to, n)))
return n;
if (__builtin_constant_p(n))
return __constant_copy_to_user(to, from, n);
else
return __copy_user(to, from, n);
}
/* We let the __ versions of copy_from/to_user inline, because they're often
* used in fast paths and have only a small space overhead.
*/
#define INLINE_COPY_FROM_USER
#define INLINE_COPY_TO_USER
static inline unsigned long
__generic_copy_from_user_nocheck(void *to, const void __user *from,
unsigned long n)
{
return __copy_user_zeroing(to, from, n);
}
static inline unsigned long
__generic_copy_to_user_nocheck(void __user *to, const void *from,
unsigned long n)
{
return __copy_user(to, from, n);
}
static inline unsigned long
__generic_clear_user_nocheck(void __user *to, unsigned long n)
__clear_user(void __user *to, unsigned long n)
{
return __do_clear_user(to, n);
}
/* without checking */
#define __copy_to_user(to, from, n) \
__generic_copy_to_user_nocheck((to), (from), (n))
#define __copy_from_user(to, from, n) \
__generic_copy_from_user_nocheck((to), (from), (n))
#define __copy_to_user_inatomic __copy_to_user
#define __copy_from_user_inatomic __copy_from_user
#define __clear_user(to, n) __generic_clear_user_nocheck((to), (n))
#define strlen_user(str) strnlen_user((str), 0x7ffffffe)
#endif /* __ASSEMBLY__ */
#endif /* _CRIS_UACCESS_H */
arch/frv/include/asm/Kbuild
View file @ 5db6db0d
generic-y += clkdev.h
generic-y += exec.h
generic-y += extable.h
generic-y += irq_work.h
generic-y += mcs_spinlock.h
generic-y += mm-arch-hooks.h
......
arch/frv/include/asm/uaccess.h
View file @ 5db6db0d
......@@ -15,16 +15,13 @@
/*
* User space memory access functions
*/
#include <linux/sched.h>
#include <linux/mm.h>
#include <asm/segment.h>
#include <asm/sections.h>
#include <asm/extable.h>
#define __ptr(x) ((unsigned long __force *)(x))
#define VERIFY_READ 0
#define VERIFY_WRITE 1
/*
* check that a range of addresses falls within the current address limit
*/
......@@ -63,26 +60,6 @@ static inline int ___range_ok(unsigned long addr, unsigned long size)
#define access_ok(type,addr,size) (__range_ok((void __user *)(addr), (size)) == 0)
#define __access_ok(addr,size) (__range_ok((addr), (size)) == 0)
/*
* The exception table consists of pairs of addresses: the first is the
* address of an instruction that is allowed to fault, and the second is
* the address at which the program should continue. No registers are
* modified, so it is entirely up to the continuation code to figure out
* what to do.
*
* All the routines below use bits of fixup code that are out of line
* with the main instruction path. This means when everything is well,
* we don't even have to jump over them. Further, they do not intrude
* on our cache or tlb entries.
*/
struct exception_table_entry
{
unsigned long insn, fixup;
};
/* Returns 0 if exception not found and fixup otherwise. */
extern unsigned long search_exception_table(unsigned long);
/*
* These are the main single-value transfer routines. They automatically
......@@ -256,61 +233,50 @@ do { \
/*
*
*/
#define ____force(x) (__force void *)(void __user *)(x)
#ifdef CONFIG_MMU
extern long __memset_user(void *dst, unsigned long count);
extern long __memcpy_user(void *dst, const void *src, unsigned long count);
#define __clear_user(dst,count) __memset_user(____force(dst), (count))
#define __copy_from_user_inatomic(to, from, n) __memcpy_user((to), ____force(from), (n))
#define __copy_to_user_inatomic(to, from, n) __memcpy_user(____force(to), (from), (n))
#else
#define __clear_user(dst,count) (memset(____force(dst), 0, (count)), 0)
#define __copy_from_user_inatomic(to, from, n) (memcpy((to), ____force(from), (n)), 0)
#define __copy_to_user_inatomic(to, from, n) (memcpy(____force(to), (from), (n)), 0)
#endif
static inline unsigned long __must_check
clear_user(void __user *to, unsigned long n)
{
if (likely(__access_ok(to, n)))
n = __clear_user(to, n);
return n;
}
static inline unsigned long __must_check
__copy_to_user(void __user *to, const void *from, unsigned long n)
{
might_fault();
return __copy_to_user_inatomic(to, from, n);
}
static inline unsigned long
__copy_from_user(void *to, const void __user *from, unsigned long n)
raw_copy_from_user(void *to, const void __user *from, unsigned long n)
{
might_fault();
return __copy_from_user_inatomic(to, from, n);
#ifdef CONFIG_MMU
return __memcpy_user(to, (__force const void *)from, n);
#else
memcpy(to, (__force const void *)from, n);
return 0;
#endif
}
static inline long copy_from_user(void *to, const void __user *from, unsigned long n)
static inline unsigned long
raw_copy_to_user(void __user *to, const void *from, unsigned long n)
{
unsigned long ret = n;
if (likely(__access_ok(from, n)))
ret = __copy_from_user(to, from, n);
if (unlikely(ret != 0))
memset(to + (n - ret), 0, ret);
return ret;
#ifdef CONFIG_MMU
return __memcpy_user((__force void *)to, from, n);
#else
memcpy((__force void *)to, from, n);
return 0;
#endif
}
#define INLINE_COPY_TO_USER
#define INLINE_COPY_FROM_USER
static inline long copy_to_user(void __user *to, const void *from, unsigned long n)
static inline unsigned long __must_check
clear_user(void __user *to, unsigned long n)
{
return likely(__access_ok(to, n)) ? __copy_to_user(to, from, n) : n;
if (likely(__access_ok(to, n)))
n = __clear_user(to, n);
return n;
}
extern long strncpy_from_user(char *dst, const char __user *src, long count);
......@@ -318,6 +284,4 @@ extern long strnlen_user(const char __user *src, long count);
#define strlen_user(str) strnlen_user(str, 32767)
extern unsigned long search_exception_table(unsigned long addr);
#endif /* _ASM_UACCESS_H */
arch/frv/kernel/traps.c
View file @ 5db6db0d
......@@ -360,13 +360,8 @@ asmlinkage void memory_access_exception(unsigned long esr0,
siginfo_t info;
#ifdef CONFIG_MMU
unsigned long fixup;
fixup = search_exception_table(__frame->pc);
if (fixup) {
__frame->pc = fixup;
if (fixup_exception(__frame))
return;
}
#endif
die_if_kernel("-- Memory Access Exception --\n"
......
arch/frv/mm/extable.c
View file @ 5db6db0d
......@@ -10,40 +10,39 @@ extern const void __memset_end, __memset_user_error_lr, __memset_user_error_hand
extern const void __memcpy_end, __memcpy_user_error_lr, __memcpy_user_error_handler;
extern spinlock_t modlist_lock;
/*****************************************************************************/
/*
* see if there's a fixup handler available to deal with a kernel fault
*/
unsigned long search_exception_table(unsigned long pc)
int fixup_exception(struct pt_regs *regs)
{
const struct exception_table_entry *extab;
unsigned long pc = regs->pc;
/* determine if the fault lay during a memcpy_user or a memset_user */
if (__frame->lr == (unsigned long) &__memset_user_error_lr &&
if (regs->lr == (unsigned long) &__memset_user_error_lr &&
(unsigned long) &memset <= pc && pc < (unsigned long) &__memset_end
) {
/* the fault occurred in a protected memset
* - we search for the return address (in LR) instead of the program counter
* - it was probably during a clear_user()
*/
return (unsigned long) &__memset_user_error_handler;
regs->pc = (unsigned long) &__memset_user_error_handler;
return 1;
}
if (__frame->lr == (unsigned long) &__memcpy_user_error_lr &&
if (regs->lr == (unsigned long) &__memcpy_user_error_lr &&
(unsigned long) &memcpy <= pc && pc < (unsigned long) &__memcpy_end
) {
/* the fault occurred in a protected memset
* - we search for the return address (in LR) instead of the program counter
* - it was probably during a copy_to/from_user()
*/
return (unsigned long) &__memcpy_user_error_handler;
regs->pc = (unsigned long) &__memcpy_user_error_handler;
return 1;
}
extab = search_exception_tables(pc);
if (extab)
return extab->fixup;
if (extab) {
regs->pc = extab->fixup;
return 1;
}
return 0;
} /* end search_exception_table() */
}
arch/frv/mm/fault.c
View file @ 5db6db0d
......@@ -33,7 +33,7 @@ asmlinkage void do_page_fault(int datammu, unsigned long esr0, unsigned long ear
{
struct vm_area_struct *vma;
struct mm_struct *mm;
unsigned long _pme, lrai, lrad, fixup;
unsigned long _pme, lrai, lrad;
unsigned long flags = 0;
siginfo_t info;
pgd_t *pge;
......@@ -201,10 +201,8 @@ asmlinkage void do_page_fault(int datammu, unsigned long esr0, unsigned long ear
no_context:
/* are we prepared to handle this kernel fault? */
if ((fixup = search_exception_table(__frame->pc)) != 0) {
__frame->pc = fixup;
if (fixup_exception(__frame))
return;
}
/*
* Oops. The kernel tried to access some bad page. We'll have to
......
arch/h8300/include/asm/Kbuild
View file @ 5db6db0d
......@@ -13,6 +13,7 @@ generic-y += dma.h
generic-y += emergency-restart.h
generic-y += errno.h
generic-y += exec.h
generic-y += extable.h
generic-y += fb.h
generic-y += fcntl.h
generic-y += ftrace.h
......@@ -68,7 +69,6 @@ generic-y += tlbflush.h
generic-y += trace_clock.h
generic-y += topology.h
generic-y += types.h
generic-y += uaccess.h
generic-y += ucontext.h
generic-y += unaligned.h
generic-y += vga.h
......
arch/h8300/include/asm/uaccess.h 0 → 100644
View file @ 5db6db0d
#ifndef _ASM_UACCESS_H
#define _ASM_UACCESS_H
#include <linux/string.h>
static inline __must_check unsigned long
raw_copy_from_user(void *to, const void __user * from, unsigned long n)
{
if (__builtin_constant_p(n)) {
switch(n) {
case 1:
*(u8 *)to = *(u8 __force *)from;
return 0;
case 2:
*(u16 *)to = *(u16 __force *)from;
return 0;
case 4:
*(u32 *)to = *(u32 __force *)from;
return 0;
}
}
memcpy(to, (const void __force *)from, n);
return 0;
}
static inline __must_check unsigned long
raw_copy_to_user(void __user *to, const void *from, unsigned long n)
{
if (__builtin_constant_p(n)) {
switch(n) {
case 1:
*(u8 __force *)to = *(u8 *)from;
return 0;
case 2:
*(u16 __force *)to = *(u16 *)from;
return 0;
case 4:
*(u32 __force *)to = *(u32 *)from;
return 0;
default:
break;
}
}
memcpy((void __force *)to, from, n);
return 0;
}
#define INLINE_COPY_FROM_USER
#define INLINE_COPY_TO_USER
#include <asm-generic/uaccess.h>
#endif
arch/hexagon/include/asm/Kbuild
View file @ 5db6db0d
......@@ -11,6 +11,7 @@ generic-y += device.h
generic-y += div64.h
generic-y += emergency-restart.h
generic-y += errno.h
generic-y += extable.h
generic-y += fb.h
generic-y += fcntl.h
generic-y += ftrace.h
......
arch/hexagon/include/asm/uaccess.h
View file @ 5db6db0d
......@@ -23,7 +23,6 @@
/*
* User space memory access functions
*/
#include <linux/sched.h>
#include <linux/mm.h>
#include <asm/segment.h>
#include <asm/sections.h>
......@@ -50,8 +49,6 @@
* reasonably simple and not *too* slow. After all, we've got the
* MMU for backup.
*/
#define VERIFY_READ 0
#define VERIFY_WRITE 1
#define __access_ok(addr, size) \
((get_fs().seg == KERNEL_DS.seg) || \
......@@ -68,19 +65,12 @@
*/
/* Assembly somewhat optimized copy routines */
unsigned long __copy_from_user_hexagon(void *to, const void __user *from,
unsigned long raw_copy_from_user(void *to, const void __user *from,
unsigned long n);
unsigned long __copy_to_user_hexagon(void __user *to, const void *from,
unsigned long raw_copy_to_user(void __user *to, const void *from,
unsigned long n);
#define __copy_from_user(to, from, n) __copy_from_user_hexagon(to, from, n)
#define __copy_to_user(to, from, n) __copy_to_user_hexagon(to, from, n)
/*
* XXX todo: some additonal performance gain is possible by
* implementing __copy_to/from_user_inatomic, which is much
* like __copy_to/from_user, but performs slightly less checking.
*/
#define INLINE_COPY_FROM_USER
#define INLINE_COPY_TO_USER
__kernel_size_t __clear_user_hexagon(void __user *dest, unsigned long count);
#define __clear_user(a, s) __clear_user_hexagon((a), (s))
......@@ -107,10 +97,14 @@ static inline long hexagon_strncpy_from_user(char *dst, const char __user *src,
return -EFAULT;
if (res > n) {
copy_from_user(dst, src, n);
long left = raw_copy_from_user(dst, src, n);
if (unlikely(left))
memset(dst + (n - left), 0, left);
return n;
} else {
copy_from_user(dst, src, res);
long left = raw_copy_from_user(dst, src, res);
if (unlikely(left))
memset(dst + (res - left), 0, left);
return res-1;
}
}
......
arch/hexagon/kernel/hexagon_ksyms.c
View file @ 5db6db0d
......@@ -25,8 +25,8 @@
/* Additional functions */
EXPORT_SYMBOL(__clear_user_hexagon);
EXPORT_SYMBOL(__copy_from_user_hexagon);
EXPORT_SYMBOL(__copy_to_user_hexagon);
EXPORT_SYMBOL(raw_copy_from_user);
EXPORT_SYMBOL(raw_copy_to_user);
EXPORT_SYMBOL(__iounmap);
EXPORT_SYMBOL(__strnlen_user);
EXPORT_SYMBOL(__vmgetie);
......
arch/hexagon/mm/copy_from_user.S
View file @ 5db6db0d
......@@ -44,7 +44,7 @@
#define bytes r2
#define loopcount r5
#define FUNCNAME __copy_from_user_hexagon
#define FUNCNAME raw_copy_from_user
#include "copy_user_template.S"
/* LOAD FAULTS from COPY_FROM_USER */
......
arch/hexagon/mm/copy_to_user.S
View file @ 5db6db0d
......@@ -43,7 +43,7 @@
#define bytes r2
#define loopcount r5
#define FUNCNAME __copy_to_user_hexagon
#define FUNCNAME raw_copy_to_user
#include "copy_user_template.S"
/* STORE FAULTS from COPY_TO_USER */
......
arch/ia64/Kconfig
View file @ 5db6db0d
......@@ -52,7 +52,6 @@ config IA64
select MODULES_USE_ELF_RELA
select ARCH_USE_CMPXCHG_LOCKREF
select HAVE_ARCH_AUDITSYSCALL
select HAVE_ARCH_HARDENED_USERCOPY
default y
help
The Itanium Processor Family is Intel's 64-bit successor to
......
arch/ia64/include/asm/extable.h 0 → 100644
View file @ 5db6db0d
#ifndef _ASM_IA64_EXTABLE_H
#define _ASM_IA64_EXTABLE_H
#define ARCH_HAS_RELATIVE_EXTABLE
struct exception_table_entry {
int insn; /* location-relative address of insn this fixup is for */
int fixup; /* location-relative continuation addr.; if bit 2 is set, r9 is set to 0 */
};
#endif
arch/ia64/include/asm/uaccess.h
View file @ 5db6db0d
......@@ -33,14 +33,13 @@
*/
#include <linux/compiler.h>
#include <linux/errno.h>
#include <linux/sched.h>
#include <linux/page-flags.h>
#include <linux/mm.h>
#include <asm/intrinsics.h>
#include <asm/pgtable.h>
#include <asm/io.h>
#include <asm/extable.h>
/*
* For historical reasons, the following macros are grossly misnamed:
......@@ -48,9 +47,6 @@
#define KERNEL_DS ((mm_segment_t) { ~0UL }) /* cf. access_ok() */
#define USER_DS ((mm_segment_t) { TASK_SIZE-1 }) /* cf. access_ok() */
#define VERIFY_READ 0
#define VERIFY_WRITE 1
#define get_ds() (KERNEL_DS)
#define get_fs() (current_thread_info()->addr_limit)
#define set_fs(x) (current_thread_info()->addr_limit = (x))
......@@ -63,14 +59,14 @@
* address TASK_SIZE is never valid. We also need to make sure that the address doesn't
* point inside the virtually mapped linear page table.
*/
#define __access_ok(addr, size, segment) \
({ \
__chk_user_ptr(addr); \
(likely((unsigned long) (addr) <= (segment).seg) \
&& ((segment).seg == KERNEL_DS.seg \
|| likely(REGION_OFFSET((unsigned long) (addr)) < RGN_MAP_LIMIT))); \
})
#define access_ok(type, addr, size) __access_ok((addr), (size), get_fs())
static inline int __access_ok(const void __user *p, unsigned long size)
{
unsigned long addr = (unsigned long)p;
unsigned long seg = get_fs().seg;
return likely(addr <= seg) &&
(seg == KERNEL_DS.seg || likely(REGION_OFFSET(addr) < RGN_MAP_LIMIT));
}
#define access_ok(type, addr, size) __access_ok((addr), (size))
/*
* These are the main single-value transfer routines. They automatically
......@@ -80,8 +76,8 @@
* (a) re-use the arguments for side effects (sizeof/typeof is ok)
* (b) require any knowledge of processes at this stage
*/
#define put_user(x, ptr) __put_user_check((__typeof__(*(ptr))) (x), (ptr), sizeof(*(ptr)), get_fs())
#define get_user(x, ptr) __get_user_check((x), (ptr), sizeof(*(ptr)), get_fs())
#define put_user(x, ptr) __put_user_check((__typeof__(*(ptr))) (x), (ptr), sizeof(*(ptr)))
#define get_user(x, ptr) __get_user_check((x), (ptr), sizeof(*(ptr)))
/*
* The "__xxx" versions do not do address space checking, useful when
......@@ -184,13 +180,13 @@ extern void __get_user_unknown (void);
* could clobber r8 and r9 (among others). Thus, be careful not to evaluate it while
* using r8/r9.
*/
#define __do_get_user(check, x, ptr, size, segment) \
#define __do_get_user(check, x, ptr, size) \
({ \
const __typeof__(*(ptr)) __user *__gu_ptr = (ptr); \
__typeof__ (size) __gu_size = (size); \
long __gu_err = -EFAULT; \
unsigned long __gu_val = 0; \
if (!check || __access_ok(__gu_ptr, size, segment)) \
if (!check || __access_ok(__gu_ptr, size)) \
switch (__gu_size) { \
case 1: __get_user_size(__gu_val, __gu_ptr, 1, __gu_err); break; \
case 2: __get_user_size(__gu_val, __gu_ptr, 2, __gu_err); break; \
......@@ -202,8 +198,8 @@ extern void __get_user_unknown (void);
__gu_err; \
})
#define __get_user_nocheck(x, ptr, size) __do_get_user(0, x, ptr, size, KERNEL_DS)
#define __get_user_check(x, ptr, size, segment) __do_get_user(1, x, ptr, size, segment)
#define __get_user_nocheck(x, ptr, size) __do_get_user(0, x, ptr, size)
#define __get_user_check(x, ptr, size) __do_get_user(1, x, ptr, size)
extern void __put_user_unknown (void);
......@@ -211,14 +207,14 @@ extern void __put_user_unknown (void);
* Evaluating arguments X, PTR, SIZE, and SEGMENT may involve subroutine-calls, which
* could clobber r8 (among others). Thus, be careful not to evaluate them while using r8.
*/
#define __do_put_user(check, x, ptr, size, segment) \
#define __do_put_user(check, x, ptr, size) \
({ \
__typeof__ (x) __pu_x = (x); \
__typeof__ (*(ptr)) __user *__pu_ptr = (ptr); \
__typeof__ (size) __pu_size = (size); \
long __pu_err = -EFAULT; \
\
if (!check || __access_ok(__pu_ptr, __pu_size, segment)) \
if (!check || __access_ok(__pu_ptr, __pu_size)) \
switch (__pu_size) { \
case 1: __put_user_size(__pu_x, __pu_ptr, 1, __pu_err); break; \
case 2: __put_user_size(__pu_x, __pu_ptr, 2, __pu_err); break; \
......@@ -229,8 +225,8 @@ extern void __put_user_unknown (void);
__pu_err; \
})
#define __put_user_nocheck(x, ptr, size) __do_put_user(0, x, ptr, size, KERNEL_DS)
#define __put_user_check(x, ptr, size, segment) __do_put_user(1, x, ptr, size, segment)
#define __put_user_nocheck(x, ptr, size) __do_put_user(0, x, ptr, size)
#define __put_user_check(x, ptr, size) __do_put_user(1, x, ptr, size)
/*
* Complex access routines
......@@ -239,56 +235,19 @@ extern unsigned long __must_check __copy_user (void __user *to, const void __use
unsigned long count);
static inline unsigned long
__copy_to_user (void __user *to, const void *from, unsigned long count)
raw_copy_to_user(void __user *to, const void *from, unsigned long count)
{
check_object_size(from, count, true);
return __copy_user(to, (__force void __user *) from, count);
}
static inline unsigned long
__copy_from_user (void *to, const void __user *from, unsigned long count)
raw_copy_from_user(void *to, const void __user *from, unsigned long count)
{
check_object_size(to, count, false);
return __copy_user((__force void __user *) to, from, count);
}
#define __copy_to_user_inatomic __copy_to_user
#define __copy_from_user_inatomic __copy_from_user
#define copy_to_user(to, from, n) \
({ \
void __user *__cu_to = (to); \
const void *__cu_from = (from); \
long __cu_len = (n); \
\
if (__access_ok(__cu_to, __cu_len, get_fs())) { \
check_object_size(__cu_from, __cu_len, true); \
__cu_len = __copy_user(__cu_to, (__force void __user *) __cu_from, __cu_len); \
} \
__cu_len; \
})
static inline unsigned long
copy_from_user(void *to, const void __user *from, unsigned long n)
{
check_object_size(to, n, false);
if (likely(__access_ok(from, n, get_fs())))
n = __copy_user((__force void __user *) to, from, n);
else
memset(to, 0, n);
return n;
}
#define __copy_in_user(to, from, size) __copy_user((to), (from), (size))
static inline unsigned long
copy_in_user (void __user *to, const void __user *from, unsigned long n)
{
if (likely(access_ok(VERIFY_READ, from, n) && access_ok(VERIFY_WRITE, to, n)))
n = __copy_user(to, from, n);
return n;
}
#define INLINE_COPY_FROM_USER
#define INLINE_COPY_TO_USER
extern unsigned long __do_clear_user (void __user *, unsigned long);
......@@ -297,7 +256,7 @@ extern unsigned long __do_clear_user (void __user *, unsigned long);
#define clear_user(to, n) \
({ \
unsigned long __cu_len = (n); \
if (__access_ok(to, __cu_len, get_fs())) \
if (__access_ok(to, __cu_len)) \
__cu_len = __do_clear_user(to, __cu_len); \
__cu_len; \
})
......@@ -313,7 +272,7 @@ extern long __must_check __strncpy_from_user (char *to, const char __user *from,
({ \
const char __user * __sfu_from = (from); \
long __sfu_ret = -EFAULT; \
if (__access_ok(__sfu_from, 0, get_fs())) \
if (__access_ok(__sfu_from, 0)) \
__sfu_ret = __strncpy_from_user((to), __sfu_from, (n)); \
__sfu_ret; \
})
......@@ -325,7 +284,7 @@ extern unsigned long __strlen_user (const char __user *);
({ \
const char __user *__su_str = (str); \
unsigned long __su_ret = 0; \
if (__access_ok(__su_str, 0, get_fs())) \
if (__access_ok(__su_str, 0)) \
__su_ret = __strlen_user(__su_str); \
__su_ret; \
})
......@@ -341,18 +300,11 @@ extern unsigned long __strnlen_user (const char __user *, long);
({ \
const char __user *__su_str = (str); \
unsigned long __su_ret = 0; \
if (__access_ok(__su_str, 0, get_fs())) \
if (__access_ok(__su_str, 0)) \
__su_ret = __strnlen_user(__su_str, len); \
__su_ret; \
})
#define ARCH_HAS_RELATIVE_EXTABLE
struct exception_table_entry {
int insn; /* location-relative address of insn this fixup is for */
int fixup; /* location-relative continuation addr.; if bit 2 is set, r9 is set to 0 */
};
#define ARCH_HAS_TRANSLATE_MEM_PTR 1
static __inline__ void *
xlate_dev_mem_ptr(phys_addr_t p)
......
arch/ia64/lib/memcpy_mck.S
View file @ 5db6db0d
......@@ -556,9 +556,6 @@ EK(.ex_handler, (p17) st8 [dst1]=r39,8); \
#define D r22
#define F r28
#define memset_arg0 r32
#define memset_arg2 r33
#define saved_retval loc0
#define saved_rtlink loc1
#define saved_pfs_stack loc2
......@@ -622,7 +619,7 @@ EK(.ex_handler, (p17) st8 [dst1]=r39,8); \
* (faulting_addr - orig_dst) -> len to faulting st address
* B = (cur_dst - orig_dst) -> len copied so far
* C = A - B -> len need to be copied
* D = orig_len - A -> len need to be zeroed
* D = orig_len - A -> len need to be left along
*/
(p6) sub A = F, saved_in0
(p7) sub A = F, saved_in1
......@@ -638,9 +635,6 @@ EK(.ex_handler, (p17) st8 [dst1]=r39,8); \
sub D = saved_in2, A
;;
cmp.gt p8,p0=C,r0 // more than 1 byte?
add memset_arg0=saved_in0, A
(p6) mov memset_arg2=0 // copy_to_user should not call memset
(p7) mov memset_arg2=D // copy_from_user need to have kbuf zeroed
mov r8=0
mov saved_retval = D
mov saved_rtlink = b0
......@@ -652,11 +646,6 @@ EK(.ex_handler, (p17) st8 [dst1]=r39,8); \
;;
add saved_retval=saved_retval,r8 // above might return non-zero value
cmp.gt p8,p0=memset_arg2,r0 // more than 1 byte?
mov out0=memset_arg0 // *s
mov out1=r0 // c
mov out2=memset_arg2 // n
(p8) br.call.sptk.few b0=memset
;;
mov retval=saved_retval
......
arch/ia64/mm/extable.c
View file @ 5db6db0d
......@@ -5,7 +5,10 @@
* David Mosberger-Tang <davidm@hpl.hp.com>
*/
#include <linux/uaccess.h>
#include <asm/ptrace.h>
#include <asm/extable.h>
#include <asm/errno.h>
#include <asm/processor.h>
void
ia64_handle_exception (struct pt_regs *regs, const struct exception_table_entry *e)
......
arch/m32r/include/asm/Kbuild
View file @ 5db6db0d
......@@ -2,6 +2,7 @@
generic-y += clkdev.h
generic-y += current.h
generic-y += exec.h
generic-y += extable.h
generic-y += irq_work.h
generic-y += kvm_para.h
generic-y += mcs_spinlock.h
......
arch/m32r/include/asm/uaccess.h
View file @ 5db6db0d
......@@ -11,13 +11,9 @@
/*
* User space memory access functions
*/
#include <linux/errno.h>
#include <linux/thread_info.h>
#include <asm/page.h>
#include <asm/setup.h>
#define VERIFY_READ 0
#define VERIFY_WRITE 1
#include <linux/prefetch.h>
/*
* The fs value determines whether argument validity checking should be
......@@ -114,25 +110,7 @@ static inline int access_ok(int type, const void *addr, unsigned long size)
}
#endif /* CONFIG_MMU */
/*
* The exception table consists of pairs of addresses: the first is the
* address of an instruction that is allowed to fault, and the second is
* the address at which the program should continue. No registers are
* modified, so it is entirely up to the continuation code to figure out
* what to do.
*
* All the routines below use bits of fixup code that are out of line
* with the main instruction path. This means when everything is well,
* we don't even have to jump over them. Further, they do not intrude
* on our cache or tlb entries.
*/
struct exception_table_entry
{
unsigned long insn, fixup;
};
extern int fixup_exception(struct pt_regs *regs);
#include <asm/extable.h>
/*
* These are the main single-value transfer routines. They automatically
......@@ -483,174 +461,25 @@ do { \
: "r14", "memory"); \
} while (0)
#define __copy_user_zeroing(to, from, size) \
do { \
unsigned long __dst, __src, __c; \
__asm__ __volatile__ ( \
" mv r14, %0\n" \
" or r14, %1\n" \
" beq %0, %1, 9f\n" \
" beqz %2, 9f\n" \
" and3 r14, r14, #3\n" \
" bnez r14, 2f\n" \
" and3 %2, %2, #3\n" \
" beqz %3, 2f\n" \
" addi %0, #-4 ; word_copy \n" \
" .fillinsn\n" \
"0: ld r14, @%1+\n" \
" addi %3, #-1\n" \
" .fillinsn\n" \
"1: st r14, @+%0\n" \
" bnez %3, 0b\n" \
" beqz %2, 9f\n" \
" addi %0, #4\n" \
" .fillinsn\n" \
"2: ldb r14, @%1 ; byte_copy \n" \
" .fillinsn\n" \
"3: stb r14, @%0\n" \
" addi %1, #1\n" \
" addi %2, #-1\n" \
" addi %0, #1\n" \
" bnez %2, 2b\n" \
" .fillinsn\n" \
"9:\n" \
".section .fixup,\"ax\"\n" \
" .balign 4\n" \
"5: addi %3, #1\n" \
" addi %1, #-4\n" \
" .fillinsn\n" \
"6: slli %3, #2\n" \
" add %2, %3\n" \
" addi %0, #4\n" \
" .fillinsn\n" \
"7: ldi r14, #0 ; store zero \n" \
" .fillinsn\n" \
"8: addi %2, #-1\n" \
" stb r14, @%0 ; ACE? \n" \
" addi %0, #1\n" \
" bnez %2, 8b\n" \
" seth r14, #high(9b)\n" \
" or3 r14, r14, #low(9b)\n" \
" jmp r14\n" \
".previous\n" \
".section __ex_table,\"a\"\n" \
" .balign 4\n" \
" .long 0b,6b\n" \
" .long 1b,5b\n" \
" .long 2b,7b\n" \
" .long 3b,7b\n" \
".previous\n" \
: "=&r" (__dst), "=&r" (__src), "=&r" (size), \
"=&r" (__c) \
: "0" (to), "1" (from), "2" (size), "3" (size / 4) \
: "r14", "memory"); \
} while (0)
/* We let the __ versions of copy_from/to_user inline, because they're often
* used in fast paths and have only a small space overhead.
*/
static inline unsigned long __generic_copy_from_user_nocheck(void *to,
const void __user *from, unsigned long n)
static inline unsigned long
raw_copy_from_user(void *to, const void __user *from, unsigned long n)
{
__copy_user_zeroing(to, from, n);
prefetchw(to);
__copy_user(to, from, n);
return n;
}
static inline unsigned long __generic_copy_to_user_nocheck(void __user *to,
const void *from, unsigned long n)
static inline unsigned long
raw_copy_to_user(void __user *to, const void *from, unsigned long n)
{
prefetch(from);
__copy_user(to, from, n);
return n;
}
unsigned long __generic_copy_to_user(void __user *, const void *, unsigned long);
unsigned long __generic_copy_from_user(void *, const void __user *, unsigned long);
/**
* __copy_to_user: - Copy a block of data into user space, with less checking.
* @to: Destination address, in user space.
* @from: Source address, in kernel space.
* @n: Number of bytes to copy.
*
* Context: User context only. This function may sleep if pagefaults are
* enabled.
*
* Copy data from kernel space to user space. Caller must check
* the specified block with access_ok() before calling this function.
*
* Returns number of bytes that could not be copied.
* On success, this will be zero.
*/
#define __copy_to_user(to, from, n) \
__generic_copy_to_user_nocheck((to), (from), (n))
#define __copy_to_user_inatomic __copy_to_user
#define __copy_from_user_inatomic __copy_from_user
/**
* copy_to_user: - Copy a block of data into user space.
* @to: Destination address, in user space.
* @from: Source address, in kernel space.
* @n: Number of bytes to copy.
*
* Context: User context only. This function may sleep if pagefaults are
* enabled.
*
* Copy data from kernel space to user space.
*
* Returns number of bytes that could not be copied.
* On success, this will be zero.
*/
#define copy_to_user(to, from, n) \
({ \
might_fault(); \
__generic_copy_to_user((to), (from), (n)); \
})
/**
* __copy_from_user: - Copy a block of data from user space, with less checking. * @to: Destination address, in kernel space.
* @from: Source address, in user space.
* @n: Number of bytes to copy.
*
* Context: User context only. This function may sleep if pagefaults are
* enabled.
*
* Copy data from user space to kernel space. Caller must check
* the specified block with access_ok() before calling this function.
*
* Returns number of bytes that could not be copied.
* On success, this will be zero.
*
* If some data could not be copied, this function will pad the copied
* data to the requested size using zero bytes.
*/
#define __copy_from_user(to, from, n) \
__generic_copy_from_user_nocheck((to), (from), (n))
/**
* copy_from_user: - Copy a block of data from user space.
* @to: Destination address, in kernel space.
* @from: Source address, in user space.
* @n: Number of bytes to copy.
*
* Context: User context only. This function may sleep if pagefaults are
* enabled.
*
* Copy data from user space to kernel space.
*
* Returns number of bytes that could not be copied.
* On success, this will be zero.
*
* If some data could not be copied, this function will pad the copied
* data to the requested size using zero bytes.
*/
#define copy_from_user(to, from, n) \
({ \
might_fault(); \
__generic_copy_from_user((to), (from), (n)); \
})
long __must_check strncpy_from_user(char *dst, const char __user *src,
long count);
long __must_check __strncpy_from_user(char *dst,
......
arch/m32r/kernel/m32r_ksyms.c
View file @ 5db6db0d
......@@ -26,8 +26,6 @@ EXPORT_SYMBOL(strncpy_from_user);
EXPORT_SYMBOL(__strncpy_from_user);
EXPORT_SYMBOL(clear_user);
EXPORT_SYMBOL(__clear_user);
EXPORT_SYMBOL(__generic_copy_from_user);
EXPORT_SYMBOL(__generic_copy_to_user);
EXPORT_SYMBOL(strnlen_user);
#ifdef CONFIG_SMP
......
arch/m32r/lib/usercopy.c
View file @ 5db6db0d
......@@ -11,27 +11,6 @@
#include <linux/thread_info.h>
#include <linux/uaccess.h>
unsigned long
__generic_copy_to_user(void __user *to, const void *from, unsigned long n)
{
prefetch(from);
if (access_ok(VERIFY_WRITE, to, n))
__copy_user(to,from,n);
return n;
}
unsigned long
__generic_copy_from_user(void *to, const void __user *from, unsigned long n)
{
prefetchw(to);
if (access_ok(VERIFY_READ, from, n))
__copy_user_zeroing(to,from,n);
else
memset(to, 0, n);
return n;
}
/*
* Copy a null terminated string from userspace.
*/
......
arch/m68k/include/asm/Kbuild
View file @ 5db6db0d
......@@ -5,6 +5,7 @@ generic-y += device.h
generic-y += emergency-restart.h
generic-y += errno.h
generic-y += exec.h
generic-y += extable.h
generic-y += futex.h
generic-y += hw_irq.h
generic-y += ioctl.h
......
arch/m68k/include/asm/processor.h
View file @ 5db6db0d
......@@ -122,16 +122,6 @@ static inline void start_thread(struct pt_regs * regs, unsigned long pc,
wrusp(usp);
}
#ifdef CONFIG_MMU
extern int handle_kernel_fault(struct pt_regs *regs);
#else
static inline int handle_kernel_fault(struct pt_regs *regs)
{
/* Any fault in kernel is fatal on non-mmu */
return 0;
}
#endif
/* Forward declaration, a strange C thing */
struct task_struct;
......
arch/m68k/include/asm/uaccess.h
View file @ 5db6db0d
......@@ -4,6 +4,7 @@
#include <asm/uaccess_mm.h>
#endif
#include <asm/extable.h>
#ifdef CONFIG_CPU_HAS_NO_UNALIGNED
#include <asm-generic/uaccess-unaligned.h>
#else
......
arch/m68k/include/asm/uaccess_mm.h
View file @ 5db6db0d
......@@ -5,14 +5,9 @@
* User space memory access functions
*/
#include <linux/compiler.h>
#include <linux/errno.h>
#include <linux/types.h>
#include <linux/sched.h>
#include <asm/segment.h>
#define VERIFY_READ 0
#define VERIFY_WRITE 1
/* We let the MMU do all checking */
static inline int access_ok(int type, const void __user *addr,
unsigned long size)
......@@ -36,24 +31,6 @@ static inline int access_ok(int type, const void __user *addr,
#define MOVES "move"
#endif
/*
* The exception table consists of pairs of addresses: the first is the
* address of an instruction that is allowed to fault, and the second is
* the address at which the program should continue. No registers are
* modified, so it is entirely up to the continuation code to figure out
* what to do.
*
* All the routines below use bits of fixup code that are out of line
* with the main instruction path. This means when everything is well,
* we don't even have to jump over them. Further, they do not intrude
* on our cache or tlb entries.
*/
struct exception_table_entry
{
unsigned long insn, fixup;
};
extern int __put_user_bad(void);
extern int __get_user_bad(void);
......@@ -202,39 +179,55 @@ asm volatile ("\n" \
unsigned long __generic_copy_from_user(void *to, const void __user *from, unsigned long n);
unsigned long __generic_copy_to_user(void __user *to, const void *from, unsigned long n);
#define __constant_copy_from_user_asm(res, to, from, tmp, n, s1, s2, s3)\
#define __suffix0
#define __suffix1 b
#define __suffix2 w
#define __suffix4 l
#define ____constant_copy_from_user_asm(res, to, from, tmp, n1, n2, n3, s1, s2, s3)\
asm volatile ("\n" \
"1: "MOVES"."#s1" (%2)+,%3\n" \
" move."#s1" %3,(%1)+\n" \
" .ifnc \""#s2"\",\"\"\n" \
"2: "MOVES"."#s2" (%2)+,%3\n" \
" move."#s2" %3,(%1)+\n" \
" .ifnc \""#s3"\",\"\"\n" \
"3: "MOVES"."#s3" (%2)+,%3\n" \
" move."#s3" %3,(%1)+\n" \
" .endif\n" \
" .endif\n" \
"4:\n" \
" .section __ex_table,\"a\"\n" \
" .align 4\n" \
" .long 1b,10f\n" \
" .ifnc \""#s2"\",\"\"\n" \
" .long 2b,20f\n" \
" .ifnc \""#s3"\",\"\"\n" \
" .long 3b,30f\n" \
" .endif\n" \
" .endif\n" \
" .previous\n" \
"\n" \
" .section .fixup,\"ax\"\n" \
" .even\n" \
"10: clr."#s1" (%1)+\n" \
"20: clr."#s2" (%1)+\n" \
"10: addq.l #"#n1",%0\n" \
" .ifnc \""#s2"\",\"\"\n" \
"20: addq.l #"#n2",%0\n" \
" .ifnc \""#s3"\",\"\"\n" \
"30: clr."#s3" (%1)+\n" \
"30: addq.l #"#n3",%0\n" \
" .endif\n" \
" .endif\n" \
" moveq.l #"#n",%0\n" \
" jra 4b\n" \
" .previous\n" \
: "+d" (res), "+&a" (to), "+a" (from), "=&d" (tmp) \
: : "memory")
#define ___constant_copy_from_user_asm(res, to, from, tmp, n1, n2, n3, s1, s2, s3)\
____constant_copy_from_user_asm(res, to, from, tmp, n1, n2, n3, s1, s2, s3)
#define __constant_copy_from_user_asm(res, to, from, tmp, n1, n2, n3) \
___constant_copy_from_user_asm(res, to, from, tmp, n1, n2, n3, \
__suffix##n1, __suffix##n2, __suffix##n3)
static __always_inline unsigned long
__constant_copy_from_user(void *to, const void __user *from, unsigned long n)
{
......@@ -242,37 +235,37 @@ __constant_copy_from_user(void *to, const void __user *from, unsigned long n)
switch (n) {
case 1:
__get_user_asm(res, *(u8 *)to, (u8 __user *)from, u8, b, d, 1);
__constant_copy_from_user_asm(res, to, from, tmp, 1, 0, 0);
break;
case 2:
__get_user_asm(res, *(u16 *)to, (u16 __user *)from, u16, w, r, 2);
__constant_copy_from_user_asm(res, to, from, tmp, 2, 0, 0);
break;
case 3:
__constant_copy_from_user_asm(res, to, from, tmp, 3, w, b,);
__constant_copy_from_user_asm(res, to, from, tmp, 2, 1, 0);
break;
case 4:
__get_user_asm(res, *(u32 *)to, (u32 __user *)from, u32, l, r, 4);
__constant_copy_from_user_asm(res, to, from, tmp, 4, 0, 0);
break;
case 5:
__constant_copy_from_user_asm(res, to, from, tmp, 5, l, b,);
__constant_copy_from_user_asm(res, to, from, tmp, 4, 1, 0);
break;
case 6:
__constant_copy_from_user_asm(res, to, from, tmp, 6, l, w,);
__constant_copy_from_user_asm(res, to, from, tmp, 4, 2, 0);
break;
case 7:
__constant_copy_from_user_asm(res, to, from, tmp, 7, l, w, b);
__constant_copy_from_user_asm(res, to, from, tmp, 4, 2, 1);
break;
case 8:
__constant_copy_from_user_asm(res, to, from, tmp, 8, l, l,);
__constant_copy_from_user_asm(res, to, from, tmp, 4, 4, 0);
break;
case 9:
__constant_copy_from_user_asm(res, to, from, tmp, 9, l, l, b);
__constant_copy_from_user_asm(res, to, from, tmp, 4, 4, 1);
break;
case 10:
__constant_copy_from_user_asm(res, to, from, tmp, 10, l, l, w);
__constant_copy_from_user_asm(res, to, from, tmp, 4, 4, 2);
break;
case 12:
__constant_copy_from_user_asm(res, to, from, tmp, 12, l, l, l);
__constant_copy_from_user_asm(res, to, from, tmp, 4, 4, 4);
break;
default:
/* we limit the inlined version to 3 moves */
......@@ -363,24 +356,26 @@ __constant_copy_to_user(void __user *to, const void *from, unsigned long n)
return res;
}
#define __copy_from_user(to, from, n) \
(__builtin_constant_p(n) ? \
__constant_copy_from_user(to, from, n) : \
__generic_copy_from_user(to, from, n))
#define __copy_to_user(to, from, n) \
(__builtin_constant_p(n) ? \
__constant_copy_to_user(to, from, n) : \
__generic_copy_to_user(to, from, n))
#define __copy_to_user_inatomic __copy_to_user
#define __copy_from_user_inatomic __copy_from_user
static inline unsigned long
raw_copy_from_user(void *to, const void __user *from, unsigned long n)
{
if (__builtin_constant_p(n))
return __constant_copy_from_user(to, from, n);
return __generic_copy_from_user(to, from, n);
}
#define copy_from_user(to, from, n) __copy_from_user(to, from, n)
#define copy_to_user(to, from, n) __copy_to_user(to, from, n)
static inline unsigned long
raw_copy_to_user(void __user *to, const void *from, unsigned long n)
{
if (__builtin_constant_p(n))
return __constant_copy_to_user(to, from, n);
return __generic_copy_to_user(to, from, n);
}
#define INLINE_COPY_FROM_USER
#define INLINE_COPY_TO_USER
#define user_addr_max() \
(segment_eq(get_fs(), USER_DS) ? TASK_SIZE : ~0UL)
(uaccess_kernel() ? ~0UL : TASK_SIZE)
extern long strncpy_from_user(char *dst, const char __user *src, long count);
extern __must_check long strlen_user(const char __user *str);
......
arch/m68k/include/asm/uaccess_no.h
View file @ 5db6db0d
......@@ -4,15 +4,11 @@
/*
* User space memory access functions
*/
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/string.h>
#include <asm/segment.h>
#define VERIFY_READ 0
#define VERIFY_WRITE 1
#define access_ok(type,addr,size) _access_ok((unsigned long)(addr),(size))
/*
......@@ -26,25 +22,6 @@ static inline int _access_ok(unsigned long addr, unsigned long size)
return 1;
}
/*
* The exception table consists of pairs of addresses: the first is the
* address of an instruction that is allowed to fault, and the second is
* the address at which the program should continue. No registers are
* modified, so it is entirely up to the continuation code to figure out
* what to do.
*
* All the routines below use bits of fixup code that are out of line
* with the main instruction path. This means when everything is well,
* we don't even have to jump over them. Further, they do not intrude
* on our cache or tlb entries.
*/
struct exception_table_entry
{
unsigned long insn, fixup;
};
/*
* These are the main single-value transfer routines. They automatically
* use the right size if we just have the right pointer type.
......@@ -124,13 +101,21 @@ extern int __get_user_bad(void);
: "=d" (x) \
: "m" (*__ptr(ptr)))
#define copy_from_user(to, from, n) (memcpy(to, from, n), 0)
#define copy_to_user(to, from, n) (memcpy(to, from, n), 0)
static inline unsigned long
raw_copy_from_user(void *to, const void __user *from, unsigned long n)
{
memcpy(to, (__force const void *)from, n);
return 0;
}
#define __copy_from_user(to, from, n) copy_from_user(to, from, n)
#define __copy_to_user(to, from, n) copy_to_user(to, from, n)
#define __copy_to_user_inatomic __copy_to_user
#define __copy_from_user_inatomic __copy_from_user
static inline unsigned long
raw_copy_to_user(void __user *to, const void *from, unsigned long n)
{
memcpy((__force void *)to, from, n);
return 0;
}
#define INLINE_COPY_FROM_USER
#define INLINE_COPY_TO_USER
/*
* Copy a null terminated string from userspace.
......
arch/m68k/kernel/signal.c
View file @ 5db6db0d
......@@ -88,7 +88,7 @@ static inline int frame_extra_sizes(int f)
return frame_size_change[f];
}
int handle_kernel_fault(struct pt_regs *regs)
int fixup_exception(struct pt_regs *regs)
{
const struct exception_table_entry *fixup;
struct pt_regs *tregs;
......
arch/m68k/kernel/traps.c
View file @ 5db6db0d
......@@ -1016,8 +1016,13 @@ asmlinkage void trap_c(struct frame *fp)
/* traced a trapping instruction on a 68020/30,
* real exception will be executed afterwards.
*/
} else if (!handle_kernel_fault(&fp->ptregs))
bad_super_trap(fp);
return;
}
#ifdef CONFIG_MMU
if (fixup_exception(&fp->ptregs))
return;
#endif
bad_super_trap(fp);
return;
}
......
arch/m68k/lib/uaccess.c
View file @ 5db6db0d
......@@ -30,19 +30,13 @@ unsigned long __generic_copy_from_user(void *to, const void __user *from,
"6:\n"
" .section .fixup,\"ax\"\n"
" .even\n"
"10: move.l %0,%3\n"
"7: clr.l (%2)+\n"
" subq.l #1,%3\n"
" jne 7b\n"
" lsl.l #2,%0\n"
"10: lsl.l #2,%0\n"
" btst #1,%5\n"
" jeq 8f\n"
"30: clr.w (%2)+\n"
" addq.l #2,%0\n"
"30: addq.l #2,%0\n"
"8: btst #0,%5\n"
" jeq 6b\n"
"50: clr.b (%2)+\n"
" addq.l #1,%0\n"
"50: addq.l #1,%0\n"
" jra 6b\n"
" .previous\n"
"\n"
......
arch/m68k/mm/fault.c
View file @ 5db6db0d
......@@ -32,7 +32,7 @@ int send_fault_sig(struct pt_regs *regs)
force_sig_info(siginfo.si_signo,
&siginfo, current);
} else {
if (handle_kernel_fault(regs))
if (fixup_exception(regs))
return -1;
//if (siginfo.si_signo == SIGBUS)
......
arch/metag/include/asm/Kbuild
View file @ 5db6db0d
......@@ -8,6 +8,7 @@ generic-y += dma.h
generic-y += emergency-restart.h
generic-y += errno.h
generic-y += exec.h
generic-y += extable.h
generic-y += fb.h
generic-y += fcntl.h
generic-y += futex.h
......
arch/metag/include/asm/uaccess.h
View file @ 5db6db0d
......@@ -4,10 +4,6 @@
/*
* User space memory access functions
*/
#include <linux/sched.h>
#define VERIFY_READ 0
#define VERIFY_WRITE 1
/*
* The fs value determines whether argument validity checking should be
......@@ -28,7 +24,7 @@
#define segment_eq(a, b) ((a).seg == (b).seg)
#define __kernel_ok (segment_eq(get_fs(), KERNEL_DS))
#define __kernel_ok (uaccess_kernel())
/*
* Explicitly allow NULL pointers here. Parts of the kernel such
* as readv/writev use access_ok to validate pointers, but want
......@@ -51,28 +47,7 @@ static inline int __access_ok(unsigned long addr, unsigned long size)
#define access_ok(type, addr, size) __access_ok((unsigned long)(addr), \
(unsigned long)(size))
static inline int verify_area(int type, const void *addr, unsigned long size)
{
return access_ok(type, addr, size) ? 0 : -EFAULT;
}
/*
* The exception table consists of pairs of addresses: the first is the
* address of an instruction that is allowed to fault, and the second is
* the address at which the program should continue. No registers are
* modified, so it is entirely up to the continuation code to figure out
* what to do.
*
* All the routines below use bits of fixup code that are out of line
* with the main instruction path. This means when everything is well,
* we don't even have to jump over them. Further, they do not intrude
* on our cache or tlb entries.
*/
struct exception_table_entry {
unsigned long insn, fixup;
};
extern int fixup_exception(struct pt_regs *regs);
#include <asm/extable.h>
/*
* These are the main single-value transfer routines. They automatically
......@@ -199,35 +174,8 @@ extern long __must_check strnlen_user(const char __user *src, long count);
extern unsigned long raw_copy_from_user(void *to, const void __user *from,
unsigned long n);
static inline unsigned long
copy_from_user(void *to, const void __user *from, unsigned long n)
{
unsigned long res = n;
if (likely(access_ok(VERIFY_READ, from, n)))
res = raw_copy_from_user(to, from, n);
if (unlikely(res))
memset(to + (n - res), 0, res);
return res;
}
#define __copy_from_user(to, from, n) raw_copy_from_user(to, from, n)
#define __copy_from_user_inatomic __copy_from_user
extern unsigned long __must_check __copy_user(void __user *to,
const void *from,
unsigned long n);
static inline unsigned long copy_to_user(void __user *to, const void *from,
unsigned long n)
{
if (access_ok(VERIFY_WRITE, to, n))
return __copy_user(to, from, n);
return n;
}
#define __copy_to_user(to, from, n) __copy_user(to, from, n)
#define __copy_to_user_inatomic __copy_to_user
extern unsigned long raw_copy_to_user(void __user *to, const void *from,
unsigned long n);
/*
* Zero Userspace
......
arch/metag/lib/usercopy.c
View file @ 5db6db0d
......@@ -548,8 +548,8 @@
"SUB %1, %1, D0Ar2\n" \
"SUB %3, %3, D1Ar1\n")
unsigned long __copy_user(void __user *pdst, const void *psrc,
unsigned long n)
unsigned long raw_copy_to_user(void __user *pdst, const void *psrc,
unsigned long n)
{
register char __user *dst asm ("A0.2") = pdst;
register const char *src asm ("A1.2") = psrc;
......@@ -654,7 +654,7 @@ unsigned long __copy_user(void __user *pdst, const void *psrc,
*/
return retn;
}
EXPORT_SYMBOL(__copy_user);
EXPORT_SYMBOL(raw_copy_to_user);
#define __asm_copy_from_user_1(to, from, ret) \
__asm_copy_user_cont(to, from, ret, \
......
arch/microblaze/include/asm/Kbuild
View file @ 5db6db0d
......@@ -3,6 +3,7 @@ generic-y += barrier.h
generic-y += clkdev.h
generic-y += device.h
generic-y += exec.h
generic-y += extable.h
generic-y += irq_work.h
generic-y += mcs_spinlock.h
generic-y += mm-arch-hooks.h
......
arch/microblaze/include/asm/uaccess.h
View file @ 5db6db0d
......@@ -11,22 +11,15 @@
#ifndef _ASM_MICROBLAZE_UACCESS_H
#define _ASM_MICROBLAZE_UACCESS_H
#ifdef __KERNEL__
#ifndef __ASSEMBLY__
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/sched.h> /* RLIMIT_FSIZE */
#include <linux/mm.h>
#include <asm/mmu.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/extable.h>
#include <linux/string.h>
#define VERIFY_READ 0
#define VERIFY_WRITE 1
/*
* On Microblaze the fs value is actually the top of the corresponding
* address space.
......@@ -55,22 +48,6 @@
# define segment_eq(a, b) ((a).seg == (b).seg)
/*
* The exception table consists of pairs of addresses: the first is the
* address of an instruction that is allowed to fault, and the second is
* the address at which the program should continue. No registers are
* modified, so it is entirely up to the continuation code to figure out
* what to do.
*
* All the routines below use bits of fixup code that are out of line
* with the main instruction path. This means when everything is well,
* we don't even have to jump over them. Further, they do not intrude
* on our cache or tlb entries.
*/
struct exception_table_entry {
unsigned long insn, fixup;
};
#ifndef CONFIG_MMU
/* Check against bounds of physical memory */
......@@ -359,39 +336,19 @@ extern long __user_bad(void);
__gu_err; \
})
/* copy_to_from_user */
#define __copy_from_user(to, from, n) \
__copy_tofrom_user((__force void __user *)(to), \
(void __user *)(from), (n))
#define __copy_from_user_inatomic(to, from, n) \
__copy_from_user((to), (from), (n))
static inline long copy_from_user(void *to,
const void __user *from, unsigned long n)
static inline unsigned long
raw_copy_from_user(void *to, const void __user *from, unsigned long n)
{
unsigned long res = n;
might_fault();
if (likely(access_ok(VERIFY_READ, from, n)))
res = __copy_from_user(to, from, n);
if (unlikely(res))
memset(to + (n - res), 0, res);
return res;
return __copy_tofrom_user((__force void __user *)to, from, n);
}
#define __copy_to_user(to, from, n) \
__copy_tofrom_user((void __user *)(to), \
(__force const void __user *)(from), (n))
#define __copy_to_user_inatomic(to, from, n) __copy_to_user((to), (from), (n))
static inline long copy_to_user(void __user *to,
const void *from, unsigned long n)
static inline unsigned long
raw_copy_to_user(void __user *to, const void *from, unsigned long n)
{
might_fault();
if (access_ok(VERIFY_WRITE, to, n))
return __copy_to_user(to, from, n);
return n;
return __copy_tofrom_user(to, (__force const void __user *)from, n);
}
#define INLINE_COPY_FROM_USER
#define INLINE_COPY_TO_USER
/*
* Copy a null terminated string from userspace.
......@@ -422,7 +379,4 @@ static inline long strnlen_user(const char __user *src, long n)
return __strnlen_user(src, n);
}
#endif /* __ASSEMBLY__ */
#endif /* __KERNEL__ */
#endif /* _ASM_MICROBLAZE_UACCESS_H */
arch/mips/Kconfig
View file @ 5db6db0d
......@@ -68,7 +68,6 @@ config MIPS
select HANDLE_DOMAIN_IRQ
select HAVE_EXIT_THREAD
select HAVE_REGS_AND_STACK_ACCESS_API
select HAVE_ARCH_HARDENED_USERCOPY
menu "Machine selection"
......
arch/mips/cavium-octeon/octeon-memcpy.S
View file @ 5db6db0d
......@@ -139,15 +139,6 @@
.set noreorder
.set noat
/*
* t7 is used as a flag to note inatomic mode.
*/
LEAF(__copy_user_inatomic)
EXPORT_SYMBOL(__copy_user_inatomic)
b __copy_user_common
li t7, 1
END(__copy_user_inatomic)
/*
* A combined memcpy/__copy_user
* __copy_user sets len to 0 for success; else to an upper bound of
......@@ -161,8 +152,6 @@ EXPORT_SYMBOL(memcpy)
__memcpy:
FEXPORT(__copy_user)
EXPORT_SYMBOL(__copy_user)
li t7, 0 /* not inatomic */
__copy_user_common:
/*
* Note: dst & src may be unaligned, len may be 0
* Temps
......@@ -414,25 +403,7 @@ l_exc:
LOAD t0, TI_TASK($28)
LOAD t0, THREAD_BUADDR(t0) # t0 is just past last good address
SUB len, AT, t0 # len number of uncopied bytes
bnez t7, 2f /* Skip the zeroing out part if inatomic */
/*
* Here's where we rely on src and dst being incremented in tandem,
* See (3) above.
* dst += (fault addr - src) to put dst at first byte to clear
*/
ADD dst, t0 # compute start address in a1
SUB dst, src
/*
* Clear len bytes starting at dst. Can't call __bzero because it
* might modify len. An inefficient loop for these rare times...
*/
beqz len, done
SUB src, len, 1
1: sb zero, 0(dst)
ADD dst, dst, 1
bnez src, 1b
SUB src, src, 1
2: jr ra
jr ra
nop
......
arch/mips/include/asm/checksum.h
View file @ 5db6db0d
......@@ -50,7 +50,7 @@ __wsum csum_partial_copy_from_user(const void __user *src, void *dst, int len,
__wsum sum, int *err_ptr)
{
might_fault();
if (segment_eq(get_fs(), get_ds()))
if (uaccess_kernel())
return __csum_partial_copy_kernel((__force void *)src, dst,
len, sum, err_ptr);
else
......@@ -82,7 +82,7 @@ __wsum csum_and_copy_to_user(const void *src, void __user *dst, int len,
{
might_fault();
if (access_ok(VERIFY_WRITE, dst, len)) {
if (segment_eq(get_fs(), get_ds()))
if (uaccess_kernel())
return __csum_partial_copy_kernel(src,
(__force void *)dst,
len, sum, err_ptr);
......
arch/mips/include/asm/r4kcache.h
View file @ 5db6db0d
......@@ -20,7 +20,7 @@
#include <asm/cpu-features.h>
#include <asm/cpu-type.h>
#include <asm/mipsmtregs.h>
#include <linux/uaccess.h> /* for segment_eq() */
#include <linux/uaccess.h> /* for uaccess_kernel() */
extern void (*r4k_blast_dcache)(void);
extern void (*r4k_blast_icache)(void);
......@@ -714,7 +714,7 @@ static inline void protected_blast_##pfx##cache##_range(unsigned long start,\
\
__##pfx##flush_prologue \
\
if (segment_eq(get_fs(), USER_DS)) { \
if (!uaccess_kernel()) { \
while (1) { \
protected_cachee_op(hitop, addr); \
if (addr == aend) \
......
arch/mips/include/asm/uaccess.h
View file @ 5db6db0d
This diff is collapsed.
arch/mips/kernel/mips-r2-to-r6-emul.c
View file @ 5db6db0d
......@@ -1200,7 +1200,7 @@ int mipsr2_decoder(struct pt_regs *regs, u32 inst, unsigned long *fcr31)
case lwl_op:
rt = regs->regs[MIPSInst_RT(inst)];
vaddr = regs->regs[MIPSInst_RS(inst)] + MIPSInst_SIMM(inst);
if (!access_ok(VERIFY_READ, vaddr, 4)) {
if (!access_ok(VERIFY_READ, (void __user *)vaddr, 4)) {
current->thread.cp0_baduaddr = vaddr;
err = SIGSEGV;
break;
......@@ -1273,7 +1273,7 @@ int mipsr2_decoder(struct pt_regs *regs, u32 inst, unsigned long *fcr31)
case lwr_op:
rt = regs->regs[MIPSInst_RT(inst)];
vaddr = regs->regs[MIPSInst_RS(inst)] + MIPSInst_SIMM(inst);
if (!access_ok(VERIFY_READ, vaddr, 4)) {
if (!access_ok(VERIFY_READ, (void __user *)vaddr, 4)) {
current->thread.cp0_baduaddr = vaddr;
err = SIGSEGV;
break;
......@@ -1347,7 +1347,7 @@ int mipsr2_decoder(struct pt_regs *regs, u32 inst, unsigned long *fcr31)
case swl_op:
rt = regs->regs[MIPSInst_RT(inst)];
vaddr = regs->regs[MIPSInst_RS(inst)] + MIPSInst_SIMM(inst);
if (!access_ok(VERIFY_WRITE, vaddr, 4)) {
if (!access_ok(VERIFY_WRITE, (void __user *)vaddr, 4)) {
current->thread.cp0_baduaddr = vaddr;
err = SIGSEGV;
break;
......@@ -1417,7 +1417,7 @@ int mipsr2_decoder(struct pt_regs *regs, u32 inst, unsigned long *fcr31)
case swr_op:
rt = regs->regs[MIPSInst_RT(inst)];
vaddr = regs->regs[MIPSInst_RS(inst)] + MIPSInst_SIMM(inst);
if (!access_ok(VERIFY_WRITE, vaddr, 4)) {
if (!access_ok(VERIFY_WRITE, (void __user *)vaddr, 4)) {
current->thread.cp0_baduaddr = vaddr;
err = SIGSEGV;
break;
......@@ -1492,7 +1492,7 @@ int mipsr2_decoder(struct pt_regs *regs, u32 inst, unsigned long *fcr31)
rt = regs->regs[MIPSInst_RT(inst)];
vaddr = regs->regs[MIPSInst_RS(inst)] + MIPSInst_SIMM(inst);
if (!access_ok(VERIFY_READ, vaddr, 8)) {
if (!access_ok(VERIFY_READ, (void __user *)vaddr, 8)) {
current->thread.cp0_baduaddr = vaddr;
err = SIGSEGV;
break;
......@@ -1611,7 +1611,7 @@ int mipsr2_decoder(struct pt_regs *regs, u32 inst, unsigned long *fcr31)
rt = regs->regs[MIPSInst_RT(inst)];
vaddr = regs->regs[MIPSInst_RS(inst)] + MIPSInst_SIMM(inst);
if (!access_ok(VERIFY_READ, vaddr, 8)) {
if (!access_ok(VERIFY_READ, (void __user *)vaddr, 8)) {
current->thread.cp0_baduaddr = vaddr;
err = SIGSEGV;
break;
......@@ -1730,7 +1730,7 @@ int mipsr2_decoder(struct pt_regs *regs, u32 inst, unsigned long *fcr31)
rt = regs->regs[MIPSInst_RT(inst)];
vaddr = regs->regs[MIPSInst_RS(inst)] + MIPSInst_SIMM(inst);
if (!access_ok(VERIFY_WRITE, vaddr, 8)) {
if (!access_ok(VERIFY_WRITE, (void __user *)vaddr, 8)) {
current->thread.cp0_baduaddr = vaddr;
err = SIGSEGV;
break;
......@@ -1848,7 +1848,7 @@ int mipsr2_decoder(struct pt_regs *regs, u32 inst, unsigned long *fcr31)
rt = regs->regs[MIPSInst_RT(inst)];
vaddr = regs->regs[MIPSInst_RS(inst)] + MIPSInst_SIMM(inst);
if (!access_ok(VERIFY_WRITE, vaddr, 8)) {
if (!access_ok(VERIFY_WRITE, (void __user *)vaddr, 8)) {
current->thread.cp0_baduaddr = vaddr;
err = SIGSEGV;
break;
......@@ -1965,7 +1965,7 @@ int mipsr2_decoder(struct pt_regs *regs, u32 inst, unsigned long *fcr31)
err = SIGBUS;
break;
}
if (!access_ok(VERIFY_READ, vaddr, 4)) {
if (!access_ok(VERIFY_READ, (void __user *)vaddr, 4)) {
current->thread.cp0_baduaddr = vaddr;
err = SIGBUS;
break;
......@@ -2021,7 +2021,7 @@ int mipsr2_decoder(struct pt_regs *regs, u32 inst, unsigned long *fcr31)
err = SIGBUS;
break;
}
if (!access_ok(VERIFY_WRITE, vaddr, 4)) {
if (!access_ok(VERIFY_WRITE, (void __user *)vaddr, 4)) {
current->thread.cp0_baduaddr = vaddr;
err = SIGBUS;
break;
......@@ -2084,7 +2084,7 @@ int mipsr2_decoder(struct pt_regs *regs, u32 inst, unsigned long *fcr31)
err = SIGBUS;
break;
}
if (!access_ok(VERIFY_READ, vaddr, 8)) {
if (!access_ok(VERIFY_READ, (void __user *)vaddr, 8)) {
current->thread.cp0_baduaddr = vaddr;
err = SIGBUS;
break;
......@@ -2145,7 +2145,7 @@ int mipsr2_decoder(struct pt_regs *regs, u32 inst, unsigned long *fcr31)
err = SIGBUS;
break;
}
if (!access_ok(VERIFY_WRITE, vaddr, 8)) {
if (!access_ok(VERIFY_WRITE, (void __user *)vaddr, 8)) {
current->thread.cp0_baduaddr = vaddr;
err = SIGBUS;
break;
......
arch/mips/kernel/syscall.c
View file @ 5db6db0d
......@@ -98,7 +98,7 @@ static inline int mips_atomic_set(unsigned long addr, unsigned long new)
if (unlikely(addr & 3))
return -EINVAL;
if (unlikely(!access_ok(VERIFY_WRITE, addr, 4)))
if (unlikely(!access_ok(VERIFY_WRITE, (const void __user *)addr, 4)))
return -EINVAL;
if (cpu_has_llsc && R10000_LLSC_WAR) {
......
arch/mips/kernel/unaligned.c
View file @ 5db6db0d
......@@ -1026,7 +1026,7 @@ static void emulate_load_store_insn(struct pt_regs *regs,
goto sigbus;
if (IS_ENABLED(CONFIG_EVA)) {
if (segment_eq(get_fs(), get_ds()))
if (uaccess_kernel())
LoadHW(addr, value, res);
else
LoadHWE(addr, value, res);
......@@ -1045,7 +1045,7 @@ static void emulate_load_store_insn(struct pt_regs *regs,
goto sigbus;
if (IS_ENABLED(CONFIG_EVA)) {
if (segment_eq(get_fs(), get_ds()))
if (uaccess_kernel())
LoadW(addr, value, res);
else
LoadWE(addr, value, res);
......@@ -1064,7 +1064,7 @@ static void emulate_load_store_insn(struct pt_regs *regs,
goto sigbus;
if (IS_ENABLED(CONFIG_EVA)) {
if (segment_eq(get_fs(), get_ds()))
if (uaccess_kernel())
LoadHWU(addr, value, res);
else
LoadHWUE(addr, value, res);
......@@ -1132,7 +1132,7 @@ static void emulate_load_store_insn(struct pt_regs *regs,
value = regs->regs[insn.i_format.rt];
if (IS_ENABLED(CONFIG_EVA)) {
if (segment_eq(get_fs(), get_ds()))
if (uaccess_kernel())
StoreHW(addr, value, res);
else
StoreHWE(addr, value, res);
......@@ -1152,7 +1152,7 @@ static void emulate_load_store_insn(struct pt_regs *regs,
value = regs->regs[insn.i_format.rt];
if (IS_ENABLED(CONFIG_EVA)) {
if (segment_eq(get_fs(), get_ds()))
if (uaccess_kernel())
StoreW(addr, value, res);
else
StoreWE(addr, value, res);
......
arch/mips/lib/memcpy.S
View file @ 5db6db0d
This diff is collapsed.
arch/mips/oprofile/backtrace.c
View file @ 5db6db0d
......@@ -18,7 +18,7 @@ struct stackframe {
static inline int get_mem(unsigned long addr, unsigned long *result)
{
unsigned long *address = (unsigned long *) addr;
if (!access_ok(VERIFY_READ, addr, sizeof(unsigned long)))
if (!access_ok(VERIFY_READ, address, sizeof(unsigned long)))
return -1;
if (__copy_from_user_inatomic(result, address, sizeof(unsigned long)))
return -3;
......
arch/mn10300/include/asm/Kbuild
View file @ 5db6db0d
......@@ -2,6 +2,7 @@
generic-y += barrier.h
generic-y += clkdev.h
generic-y += exec.h
generic-y += extable.h
generic-y += irq_work.h
generic-y += mcs_spinlock.h
generic-y += mm-arch-hooks.h
......
arch/mn10300/include/asm/uaccess.h
View file @ 5db6db0d
This diff is collapsed.
arch/mn10300/kernel/mn10300_ksyms.c
View file @ 5db6db0d
......@@ -26,8 +26,6 @@ EXPORT_SYMBOL(strncpy_from_user);
EXPORT_SYMBOL(__strncpy_from_user);
EXPORT_SYMBOL(clear_user);
EXPORT_SYMBOL(__clear_user);
EXPORT_SYMBOL(__generic_copy_from_user);
EXPORT_SYMBOL(__generic_copy_to_user);
EXPORT_SYMBOL(strnlen_user);
extern u64 __ashrdi3(u64, unsigned);
......
arch/mn10300/lib/usercopy.c
View file @ 5db6db0d
......@@ -11,24 +11,6 @@
*/
#include <linux/uaccess.h>
unsigned long
__generic_copy_to_user(void *to, const void *from, unsigned long n)
{
if (access_ok(VERIFY_WRITE, to, n))
__copy_user(to, from, n);
return n;
}
unsigned long
__generic_copy_from_user(void *to, const void *from, unsigned long n)
{
if (access_ok(VERIFY_READ, from, n))
__copy_user_zeroing(to, from, n);
else
memset(to, 0, n);
return n;
}
/*
* Copy a null terminated string from userspace.
*/
......
arch/nios2/include/asm/Kbuild
View file @ 5db6db0d
......@@ -13,6 +13,7 @@ generic-y += dma.h
generic-y += emergency-restart.h
generic-y += errno.h
generic-y += exec.h
generic-y += extable.h
generic-y += fb.h
generic-y += fcntl.h
generic-y += ftrace.h
......
arch/nios2/include/asm/uaccess.h
View file @ 5db6db0d
This diff is collapsed.
arch/nios2/mm/uaccess.c
View file @ 5db6db0d
This diff is collapsed.
arch/openrisc/include/asm/Kbuild
View file @ 5db6db0d
This diff is collapsed.
arch/openrisc/include/asm/uaccess.h
View file @ 5db6db0d
This diff is collapsed.
arch/parisc/Kconfig
View file @ 5db6db0d
This diff is collapsed.
arch/parisc/include/asm/futex.h
View file @ 5db6db0d
This diff is collapsed.
arch/parisc/include/asm/uaccess.h
View file @ 5db6db0d
This diff is collapsed.
arch/parisc/lib/memcpy.c
View file @ 5db6db0d
This diff is collapsed.
arch/powerpc/Kconfig
View file @ 5db6db0d
This diff is collapsed.
arch/powerpc/include/asm/extable.h 0 → 100644
View file @ 5db6db0d
This diff is collapsed.
arch/powerpc/include/asm/uaccess.h
View file @ 5db6db0d
This diff is collapsed.
arch/powerpc/lib/Makefile
View file @ 5db6db0d
This diff is collapsed.
arch/powerpc/lib/copy_32.S
View file @ 5db6db0d
This diff is collapsed.
arch/powerpc/lib/copyuser_64.S
View file @ 5db6db0d
This diff is collapsed.
arch/powerpc/lib/usercopy_64.c deleted 100644 → 0
View file @ 5fab1004
This diff is collapsed.
arch/s390/Kconfig
View file @ 5db6db0d
This diff is collapsed.
arch/s390/include/asm/extable.h 0 → 100644
View file @ 5db6db0d
This diff is collapsed.
arch/s390/include/asm/uaccess.h
View file @ 5db6db0d
This diff is collapsed.
arch/s390/lib/uaccess.c
View file @ 5db6db0d
This diff is collapsed.
arch/score/include/asm/Kbuild
View file @ 5db6db0d
This diff is collapsed.
arch/score/include/asm/extable.h deleted 100644 → 0
View file @ 5fab1004
This diff is collapsed.
arch/score/include/asm/uaccess.h
View file @ 5db6db0d
This diff is collapsed.
arch/sh/include/asm/extable.h 0 → 100644
View file @ 5db6db0d
This diff is collapsed.
arch/sh/include/asm/uaccess.h
View file @ 5db6db0d
This diff is collapsed.
arch/sparc/Kconfig
View file @ 5db6db0d
This diff is collapsed.
arch/sparc/include/asm/uaccess.h
View file @ 5db6db0d
This diff is collapsed.
arch/sparc/include/asm/uaccess_32.h
View file @ 5db6db0d
This diff is collapsed.
arch/sparc/include/asm/uaccess_64.h
View file @ 5db6db0d
This diff is collapsed.
arch/sparc/kernel/head_32.S
View file @ 5db6db0d
This diff is collapsed.
arch/sparc/lib/GENcopy_from_user.S
View file @ 5db6db0d
This diff is collapsed.
arch/sparc/lib/GENcopy_to_user.S
View file @ 5db6db0d
This diff is collapsed.
arch/sparc/lib/GENpatch.S
View file @ 5db6db0d
This diff is collapsed.
arch/sparc/lib/NG2copy_from_user.S
View file @ 5db6db0d
This diff is collapsed.
arch/sparc/lib/NG2copy_to_user.S
View file @ 5db6db0d
This diff is collapsed.
arch/sparc/lib/NG2patch.S
View file @ 5db6db0d
This diff is collapsed.
arch/sparc/lib/NG4copy_from_user.S
View file @ 5db6db0d
This diff is collapsed.
arch/sparc/lib/NG4copy_to_user.S
View file @ 5db6db0d
This diff is collapsed.
arch/sparc/lib/NG4patch.S
View file @ 5db6db0d
This diff is collapsed.
arch/sparc/lib/NGcopy_from_user.S
View file @ 5db6db0d
This diff is collapsed.
arch/sparc/lib/NGcopy_to_user.S
View file @ 5db6db0d
This diff is collapsed.
arch/sparc/lib/NGpatch.S
View file @ 5db6db0d
This diff is collapsed.
arch/sparc/lib/U1copy_from_user.S
View file @ 5db6db0d
This diff is collapsed.
arch/sparc/lib/U1copy_to_user.S
View file @ 5db6db0d
This diff is collapsed.
arch/sparc/lib/U3copy_to_user.S
View file @ 5db6db0d
This diff is collapsed.
arch/sparc/lib/U3patch.S
View file @ 5db6db0d
This diff is collapsed.
arch/sparc/lib/copy_in_user.S
View file @ 5db6db0d
This diff is collapsed.
arch/sparc/lib/copy_user.S
View file @ 5db6db0d
This diff is collapsed.
arch/tile/include/asm/Kbuild
View file @ 5db6db0d
This diff is collapsed.
arch/tile/include/asm/uaccess.h
View file @ 5db6db0d
This diff is collapsed.
arch/tile/lib/exports.c
View file @ 5db6db0d
This diff is collapsed.
arch/tile/lib/memcpy_32.S
View file @ 5db6db0d
This diff is collapsed.
arch/tile/lib/memcpy_user_64.c
View file @ 5db6db0d
This diff is collapsed.
arch/um/include/asm/Kbuild
View file @ 5db6db0d
This diff is collapsed.
arch/um/include/asm/uaccess.h
View file @ 5db6db0d
This diff is collapsed.
arch/um/kernel/skas/uaccess.c
View file @ 5db6db0d
This diff is collapsed.
arch/unicore32/include/asm/Kbuild
View file @ 5db6db0d
This diff is collapsed.
arch/unicore32/include/asm/uaccess.h
View file @ 5db6db0d
This diff is collapsed.
arch/unicore32/kernel/ksyms.c
View file @ 5db6db0d
This diff is collapsed.
arch/unicore32/kernel/process.c
View file @ 5db6db0d
This diff is collapsed.
arch/unicore32/lib/copy_from_user.S
View file @ 5db6db0d
This diff is collapsed.
arch/unicore32/lib/copy_to_user.S
View file @ 5db6db0d
This diff is collapsed.
arch/x86/Kconfig
View file @ 5db6db0d
This diff is collapsed.
arch/x86/include/asm/uaccess.h
View file @ 5db6db0d
This diff is collapsed.
arch/x86/include/asm/uaccess_32.h
View file @ 5db6db0d
This diff is collapsed.
arch/x86/include/asm/uaccess_64.h
View file @ 5db6db0d
This diff is collapsed.
arch/x86/lib/usercopy.c
View file @ 5db6db0d
This diff is collapsed.
arch/x86/lib/usercopy_32.c
View file @ 5db6db0d
This diff is collapsed.
arch/x86/lib/usercopy_64.c
View file @ 5db6db0d
This diff is collapsed.
arch/xtensa/include/asm/Kbuild
View file @ 5db6db0d
This diff is collapsed.
arch/xtensa/include/asm/asm-uaccess.h
View file @ 5db6db0d
This diff is collapsed.
arch/xtensa/include/asm/uaccess.h
View file @ 5db6db0d
This diff is collapsed.
arch/xtensa/lib/usercopy.S
View file @ 5db6db0d
This diff is collapsed.
block/bsg.c
View file @ 5db6db0d
This diff is collapsed.
drivers/scsi/esas2r/esas2r_ioctl.c
View file @ 5db6db0d
This diff is collapsed.
drivers/scsi/sg.c
View file @ 5db6db0d
This diff is collapsed.
fs/ocfs2/cluster/tcp.c
View file @ 5db6db0d
This diff is collapsed.
include/asm-generic/extable.h 0 → 100644
View file @ 5db6db0d
This diff is collapsed.
include/asm-generic/uaccess.h
View file @ 5db6db0d
This diff is collapsed.
include/linux/uaccess.h
View file @ 5db6db0d
This diff is collapsed.
include/rdma/ib.h
View file @ 5db6db0d
This diff is collapsed.
kernel/trace/bpf_trace.c
View file @ 5db6db0d
This diff is collapsed.
lib/Makefile
View file @ 5db6db0d
This diff is collapsed.
lib/iov_iter.c
View file @ 5db6db0d
This diff is collapsed.
lib/usercopy.c 0 → 100644
View file @ 5db6db0d
This diff is collapsed.
mm/memory.c
View file @ 5db6db0d
This diff is collapsed.
net/rds/tcp.c
View file @ 5db6db0d
This diff is collapsed.
net/rds/tcp_send.c
View file @ 5db6db0d
This diff is collapsed.
security/Kconfig
View file @ 5db6db0d
This diff is collapsed.
security/tomoyo/network.c
View file @ 5db6db0d
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7