Commit 5e2032d4 authored by Ville Syrjälä's avatar Ville Syrjälä Committed by Daniel Vetter

drm/i915: Eliminate race from gen2/3 page flip interrupt handling

If the interrupt handler were to process a previous vblank interrupt and
the following flip pending interrupt at the same time, the page flip
would be completed too soon.

To eliminate this race, check the live pending flip status from the ISR
register before finishing the page flip.

v2: Added a comment explaining the logic (by Chris Wilson)
v3: Fix a typo in the comment
Reviewed-by: default avatarChris Wilson <chris@chris-wilson.co.uk>
Tested-by: default avatarChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: default avatarVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
parent 2ec90668
......@@ -2284,8 +2284,11 @@ static irqreturn_t i8xx_irq_handler(int irq, void *arg)
drm_handle_vblank(dev, 0)) {
if (iir & I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT) {
intel_prepare_page_flip(dev, 0);
intel_finish_page_flip(dev, 0);
flip_mask &= ~I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT;
if ((I915_READ16(ISR) & I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT) == 0) {
intel_finish_page_flip(dev, 0);
flip_mask &= ~I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT;
}
}
}
......@@ -2293,8 +2296,11 @@ static irqreturn_t i8xx_irq_handler(int irq, void *arg)
drm_handle_vblank(dev, 1)) {
if (iir & I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT) {
intel_prepare_page_flip(dev, 1);
intel_finish_page_flip(dev, 1);
flip_mask &= ~I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT;
if ((I915_READ16(ISR) & I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT) == 0) {
intel_finish_page_flip(dev, 1);
flip_mask &= ~I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT;
}
}
}
......@@ -2491,8 +2497,17 @@ static irqreturn_t i915_irq_handler(int irq, void *arg)
drm_handle_vblank(dev, pipe)) {
if (iir & flip[plane]) {
intel_prepare_page_flip(dev, plane);
intel_finish_page_flip(dev, pipe);
flip_mask &= ~flip[plane];
/* We detect FlipDone by looking for the change in PendingFlip from '1'
* to '0' on the following vblank, i.e. IIR has the Pendingflip
* asserted following the MI_DISPLAY_FLIP, but ISR is deasserted, hence
* the flip is completed (no longer pending). Since this doesn't raise an
* interrupt per se, we watch for the change at vblank.
*/
if ((I915_READ(ISR) & flip[plane]) == 0) {
intel_finish_page_flip(dev, pipe);
flip_mask &= ~flip[plane];
}
}
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment