Commit 5e42488f authored by Jeff Garzik's avatar Jeff Garzik

Merge pobox.com:/spare/repo/netdev-2.6/e100

into pobox.com:/spare/repo/netdev-2.6/ALL
parents 8396c851 85dc189b
......@@ -41,6 +41,7 @@
module by all drivers that require it.
Alan Cox : Spinlocking work, added 'BUG_83C690'
Paul Gortmaker : Separate out Tx timeout code from Tx path.
Paul Gortmaker : Remove old unused single Tx buffer code.
Sources:
The National Semiconductor LAN Databook, and the 3Com 3c503 databook.
......@@ -289,8 +290,6 @@ static int ei_start_xmit(struct sk_buff *skb, struct net_device *dev)
send_length = ETH_ZLEN < length ? length : ETH_ZLEN;
#ifdef EI_PINGPONG
/*
* We have two Tx slots available for use. Find the first free
* slot, and then perform some sanity checks. With two Tx bufs,
......@@ -309,7 +308,7 @@ static int ei_start_xmit(struct sk_buff *skb, struct net_device *dev)
}
else if (ei_local->tx2 == 0)
{
output_page = ei_local->tx_start_page + TX_1X_PAGES;
output_page = ei_local->tx_start_page + TX_PAGES/2;
ei_local->tx2 = send_length;
if (ei_debug && ei_local->tx1 > 0)
printk(KERN_DEBUG "%s: idle transmitter, tx1=%d, lasttx=%d, txing=%d.\n",
......@@ -366,28 +365,6 @@ static int ei_start_xmit(struct sk_buff *skb, struct net_device *dev)
else
netif_start_queue(dev);
#else /* EI_PINGPONG */
/*
* Only one Tx buffer in use. You need two Tx bufs to come close to
* back-to-back transmits. Expect a 20 -> 25% performance hit on
* reasonable hardware if you only use one Tx buffer.
*/
if (length == send_length)
ei_block_output(dev, length, skb->data, ei_local->tx_start_page);
else {
memset(scratch, 0, ETH_ZLEN);
memcpy(scratch, skb->data, skb->len);
ei_block_output(dev, ETH_ZLEN, scratch, ei_local->tx_start_page);
}
ei_local->txing = 1;
NS8390_trigger_send(dev, send_length, ei_local->tx_start_page);
dev->trans_start = jiffies;
netif_stop_queue(dev);
#endif /* EI_PINGPONG */
/* Turn 8390 interrupts back on. */
ei_local->irqlock = 0;
outb_p(ENISR_ALL, e8390_base + EN0_IMR);
......@@ -590,8 +567,6 @@ static void ei_tx_intr(struct net_device *dev)
outb_p(ENISR_TX, e8390_base + EN0_ISR); /* Ack intr. */
#ifdef EI_PINGPONG
/*
* There are two Tx buffers, see which one finished, and trigger
* the send of another one if it exists.
......@@ -634,13 +609,6 @@ static void ei_tx_intr(struct net_device *dev)
// else printk(KERN_WARNING "%s: unexpected TX-done interrupt, lasttx=%d.\n",
// dev->name, ei_local->lasttx);
#else /* EI_PINGPONG */
/*
* Single Tx buffer: mark it free so another packet can be loaded.
*/
ei_local->txing = 0;
#endif
/* Minimize Tx latency: update the statistics after we restart TXing. */
if (status & ENTSR_COL)
ei_local->stat.collisions++;
......
......@@ -12,17 +12,7 @@
#include <linux/ioport.h>
#include <linux/skbuff.h>
#define TX_2X_PAGES 12
#define TX_1X_PAGES 6
/* Should always use two Tx slots to get back-to-back transmits. */
#define EI_PINGPONG
#ifdef EI_PINGPONG
#define TX_PAGES TX_2X_PAGES
#else
#define TX_PAGES TX_1X_PAGES
#endif
#define TX_PAGES 12 /* Two Tx slots */
#define ETHER_ADDR_LEN 6
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment