Merge branch 'qcom-emac-various-minor-fixes'

Timur Tabi says:

====================
net: qcom/emac: various minor fixes

A set of patches for 4.15 that clean up some code, apply minors fixes,
and so on.  Some of the code also prepares the driver for a future
version of the EMAC controller.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/qualcomm/emac/emac-mac.c

@@ -309,22 +309,12 @@ void emac_mac_mode_config(struct emac_adapter *adpt)
 /* Config descriptor rings */
 static void emac_mac_dma_rings_config(struct emac_adapter *adpt)
 {
-	static const unsigned short tpd_q_offset[] = {
-		EMAC_DESC_CTRL_8,        EMAC_H1TPD_BASE_ADDR_LO,
-		EMAC_H2TPD_BASE_ADDR_LO, EMAC_H3TPD_BASE_ADDR_LO};
-	static const unsigned short rfd_q_offset[] = {
-		EMAC_DESC_CTRL_2,        EMAC_DESC_CTRL_10,
-		EMAC_DESC_CTRL_12,       EMAC_DESC_CTRL_13};
-	static const unsigned short rrd_q_offset[] = {
-		EMAC_DESC_CTRL_5,        EMAC_DESC_CTRL_14,
-		EMAC_DESC_CTRL_15,       EMAC_DESC_CTRL_16};
-
 	/* TPD (Transmit Packet Descriptor) */
 	writel(upper_32_bits(adpt->tx_q.tpd.dma_addr),
 	       adpt->base + EMAC_DESC_CTRL_1);
 
 	writel(lower_32_bits(adpt->tx_q.tpd.dma_addr),
-	       adpt->base + tpd_q_offset[0]);
+	       adpt->base + EMAC_DESC_CTRL_8);
 
 	writel(adpt->tx_q.tpd.count & TPD_RING_SIZE_BMSK,
 	       adpt->base + EMAC_DESC_CTRL_9);
@@ -334,9 +324,9 @@ static void emac_mac_dma_rings_config(struct emac_adapter *adpt)
 	       adpt->base + EMAC_DESC_CTRL_0);
 
 	writel(lower_32_bits(adpt->rx_q.rfd.dma_addr),
-	       adpt->base + rfd_q_offset[0]);
+	       adpt->base + EMAC_DESC_CTRL_2);
 	writel(lower_32_bits(adpt->rx_q.rrd.dma_addr),
-	       adpt->base + rrd_q_offset[0]);
+	       adpt->base + EMAC_DESC_CTRL_5);
 
 	writel(adpt->rx_q.rfd.count & RFD_RING_SIZE_BMSK,
 	       adpt->base + EMAC_DESC_CTRL_3);
@@ -744,6 +734,11 @@ static int emac_rx_descs_alloc(struct emac_adapter *adpt)
 	rx_q->rrd.size = rx_q->rrd.count * (adpt->rrd_size * 4);
 	rx_q->rfd.size = rx_q->rfd.count * (adpt->rfd_size * 4);
 
+	/* Check if the RRD and RFD are aligned properly, and if not, adjust. */
+	if (upper_32_bits(ring_header->dma_addr) !=
+	    upper_32_bits(ring_header->dma_addr + ALIGN(rx_q->rrd.size, 8)))
+		ring_header->used = ALIGN(rx_q->rrd.size, 8);
+
 	rx_q->rrd.dma_addr = ring_header->dma_addr + ring_header->used;
 	rx_q->rrd.v_addr   = ring_header->v_addr + ring_header->used;
 	ring_header->used += ALIGN(rx_q->rrd.size, 8);
@@ -777,11 +772,18 @@ int emac_mac_rx_tx_rings_alloc_all(struct emac_adapter *adpt)
 
 	/* Ring DMA buffer. Each ring may need up to 8 bytes for alignment,
 	 * hence the additional padding bytes are allocated.
+	 *
+	 * Also double the memory allocated for the RRD so that we can
+	 * re-align it if necessary.  The EMAC has a restriction that the
+	 * upper 32 bits of the base addresses for the RFD and RRD rings
+	 * must be the same.  It is extremely unlikely that this is not the
+	 * case, since the rings are only a few KB in size.  However, we
+	 * need to check for this anyway, and if the two rings are not
+	 * compliant, then we re-align.
 	 */
-	ring_header->size = num_tx_descs * (adpt->tpd_size * 4) +
-			    num_rx_descs * (adpt->rfd_size * 4) +
-			    num_rx_descs * (adpt->rrd_size * 4) +
-			    8 + 2 * 8; /* 8 byte per one Tx and two Rx rings */
+	ring_header->size = ALIGN(num_tx_descs * (adpt->tpd_size * 4), 8) +
+			    ALIGN(num_rx_descs * (adpt->rfd_size * 4), 8) +
+			    ALIGN(num_rx_descs * (adpt->rrd_size * 4), 8) * 2;
 
 	ring_header->used = 0;
 	ring_header->v_addr = dma_zalloc_coherent(dev, ring_header->size,
@@ -790,26 +792,23 @@ int emac_mac_rx_tx_rings_alloc_all(struct emac_adapter *adpt)
 	if (!ring_header->v_addr)
 		return -ENOMEM;
 
-	ring_header->used = ALIGN(ring_header->dma_addr, 8) -
-							ring_header->dma_addr;
-
-	ret = emac_tx_q_desc_alloc(adpt, &adpt->tx_q);
-	if (ret) {
-		netdev_err(adpt->netdev, "error: Tx Queue alloc failed\n");
-		goto err_alloc_tx;
-	}
-
 	ret = emac_rx_descs_alloc(adpt);
 	if (ret) {
 		netdev_err(adpt->netdev, "error: Rx Queue alloc failed\n");
 		goto err_alloc_rx;
 	}
 
+	ret = emac_tx_q_desc_alloc(adpt, &adpt->tx_q);
+	if (ret) {
+		netdev_err(adpt->netdev, "transmit queue allocation failed\n");
+		goto err_alloc_tx;
+	}
+
 	return 0;
 
-err_alloc_rx:
-	emac_tx_q_bufs_free(adpt);
 err_alloc_tx:
+	emac_rx_q_bufs_free(adpt);
+err_alloc_rx:
 	dma_free_coherent(dev, ring_header->size,
 			  ring_header->v_addr, ring_header->dma_addr);
 

drivers/net/ethernet/qualcomm/emac/emac-sgmii.c

@@ -68,10 +68,10 @@ static void emac_sgmii_link_init(struct emac_adapter *adpt)
 	writel(val, phy->base + EMAC_SGMII_PHY_AUTONEG_CFG2);
 }
 
-static int emac_sgmii_irq_clear(struct emac_adapter *adpt, u32 irq_bits)
+static int emac_sgmii_irq_clear(struct emac_adapter *adpt, u8 irq_bits)
 {
 	struct emac_sgmii *phy = &adpt->phy;
-	u32 status;
+	u8 status;
 
 	writel_relaxed(irq_bits, phy->base + EMAC_SGMII_PHY_INTERRUPT_CLEAR);
 	writel_relaxed(IRQ_GLOBAL_CLEAR, phy->base + EMAC_SGMII_PHY_IRQ_CMD);
@@ -86,9 +86,8 @@ static int emac_sgmii_irq_clear(struct emac_adapter *adpt, u32 irq_bits)
 				      EMAC_SGMII_PHY_INTERRUPT_STATUS,
 				      status, !(status & irq_bits), 1,
 				      SGMII_PHY_IRQ_CLR_WAIT_TIME)) {
-		netdev_err(adpt->netdev,
-			   "error: failed clear SGMII irq: status:0x%x bits:0x%x\n",
-			   status, irq_bits);
+		net_err_ratelimited("%s: failed to clear SGMII irq: status:0x%x bits:0x%x\n",
+				    adpt->netdev->name, status, irq_bits);
 		return -EIO;
 	}
 
@@ -109,7 +108,7 @@ static irqreturn_t emac_sgmii_interrupt(int irq, void *data)
 {
 	struct emac_adapter *adpt = data;
 	struct emac_sgmii *phy = &adpt->phy;
-	u32 status;
+	u8 status;
 
 	status = readl(phy->base + EMAC_SGMII_PHY_INTERRUPT_STATUS);
 	status &= SGMII_ISR_MASK;
@@ -139,10 +138,8 @@ static irqreturn_t emac_sgmii_interrupt(int irq, void *data)
 		atomic_set(&phy->decode_error_count, 0);
 	}
 
-	if (emac_sgmii_irq_clear(adpt, status)) {
-		netdev_warn(adpt->netdev, "failed to clear SGMII interrupt\n");
+	if (emac_sgmii_irq_clear(adpt, status))
 		schedule_work(&adpt->work_thread);
-	}
 
 	return IRQ_HANDLED;
 }

drivers/net/ethernet/qualcomm/emac/emac.c

@@ -148,9 +148,8 @@ static irqreturn_t emac_isr(int _irq, void *data)
 		goto exit;
 
 	if (status & ISR_ERROR) {
-		netif_warn(adpt,  intr, adpt->netdev,
-			   "warning: error irq status 0x%lx\n",
-			   status & ISR_ERROR);
+		net_err_ratelimited("%s: error interrupt 0x%lx\n",
+				    adpt->netdev->name, status & ISR_ERROR);
 		/* reset MAC */
 		schedule_work(&adpt->work_thread);
 	}
@@ -169,7 +168,8 @@ static irqreturn_t emac_isr(int _irq, void *data)
 		emac_mac_tx_process(adpt, &adpt->tx_q);
 
 	if (status & ISR_OVER)
-		net_warn_ratelimited("warning: TX/RX overflow\n");
+		net_warn_ratelimited("%s: TX/RX overflow interrupt\n",
+				     adpt->netdev->name);
 
 exit:
 	/* enable the interrupt */
@@ -615,20 +615,11 @@ static int emac_probe(struct platform_device *pdev)
 	u32 reg;
 	int ret;
 
-	/* The EMAC itself is capable of 64-bit DMA, so try that first. */
-	ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
+	/* The TPD buffer address is limited to 45 bits. */
+	ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(45));
 	if (ret) {
-		/* Some platforms may restrict the EMAC's address bus to less
-		 * then the size of DDR. In this case, we need to try a
-		 * smaller mask.  We could try every possible smaller mask,
-		 * but that's overkill.  Instead, just fall to 32-bit, which
-		 * should always work.
-		 */
-		ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
-		if (ret) {
-			dev_err(&pdev->dev, "could not set DMA mask\n");
-			return ret;
-		}
+		dev_err(&pdev->dev, "could not set DMA mask\n");
+		return ret;
 	}
 
 	netdev = alloc_etherdev(sizeof(struct emac_adapter));