Commit 5f981073 authored by Yoshihiro Shimoda's avatar Yoshihiro Shimoda Committed by Greg Kroah-Hartman

usb: host: xhci-rcar: Add a condition check about PLL active

This patch adds a condition check about the PLL acvice of this
controller. Otherwise, the controller might cause hang when
any USB clocks are not supplied yet and accesses the xHCI registers.
Signed-off-by: default avatarYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent ed8603e1
......@@ -29,6 +29,7 @@ MODULE_FIRMWARE(XHCI_RCAR_FIRMWARE_NAME_V2);
MODULE_FIRMWARE(XHCI_RCAR_FIRMWARE_NAME_V3);
/*** Register Offset ***/
#define RCAR_USB3_AXH_STA 0x104 /* AXI Host Control Status */
#define RCAR_USB3_INT_ENA 0x224 /* Interrupt Enable */
#define RCAR_USB3_DL_CTRL 0x250 /* FW Download Control & Status */
#define RCAR_USB3_FW_DATA0 0x258 /* FW Data0 */
......@@ -41,6 +42,12 @@ MODULE_FIRMWARE(XHCI_RCAR_FIRMWARE_NAME_V3);
#define RCAR_USB3_TX_POL 0xab8 /* USB3.0 TX Polarity */
/*** Register Settings ***/
/* AXI Host Control Status */
#define RCAR_USB3_AXH_STA_B3_PLL_ACTIVE 0x00010000
#define RCAR_USB3_AXH_STA_B2_PLL_ACTIVE 0x00000001
#define RCAR_USB3_AXH_STA_PLL_ACTIVE_MASK (RCAR_USB3_AXH_STA_B3_PLL_ACTIVE | \
RCAR_USB3_AXH_STA_B2_PLL_ACTIVE)
/* Interrupt Enable */
#define RCAR_USB3_INT_XHC_ENA 0x00000001
#define RCAR_USB3_INT_PME_ENA 0x00000002
......@@ -200,6 +207,22 @@ static int xhci_rcar_download_firmware(struct usb_hcd *hcd)
return retval;
}
static bool xhci_rcar_wait_for_pll_active(struct usb_hcd *hcd)
{
int timeout = 1000;
u32 val, mask = RCAR_USB3_AXH_STA_PLL_ACTIVE_MASK;
while (timeout > 0) {
val = readl(hcd->regs + RCAR_USB3_AXH_STA);
if ((val & mask) == mask)
return true;
udelay(1);
timeout--;
}
return false;
}
/* This function needs to initialize a "phy" of usb before */
int xhci_rcar_init_quirk(struct usb_hcd *hcd)
{
......@@ -220,6 +243,9 @@ int xhci_rcar_init_quirk(struct usb_hcd *hcd)
xhci_rcar_is_gen3(hcd->self.controller))
xhci->quirks |= XHCI_NO_64BIT_SUPPORT;
if (!xhci_rcar_wait_for_pll_active(hcd))
return -ETIMEDOUT;
return xhci_rcar_download_firmware(hcd);
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment