Skip to content

L
linux
Commit 608d1938 authored by Tony Lindgren's avatar Tony Lindgren
Browse files
Options

ARM: OMAP2+: Remove omap4 pdata for USB 

This is no longer needed as omap4 is now booted
using device tree.
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent b30e321b
Hide whitespace changes
Inline Side-by-side
Showing with 0 additions and 242 deletions
arch/arm/mach-omap2/devices.c
View file @ 608d1938
......@@ -21,7 +21,6 @@
#include <linux/pinctrl/machine.h>
#include <linux/platform_data/omap4-keypad.h>
#include <linux/platform_data/omap_ocp2scp.h>
#include <linux/usb/omap_control_usb.h>
#include <linux/wl12xx.h>
#include <asm/mach-types.h>
......@@ -255,49 +254,6 @@ static inline void omap_init_camera(void)
#endif
}
#if IS_ENABLED(CONFIG_OMAP_CONTROL_USB)
static struct omap_control_usb_platform_data omap4_control_usb_pdata = {
.type = 1,
};
struct resource omap4_control_usb_res[] = {
{
.name = "control_dev_conf",
.start = 0x4a002300,
.end = 0x4a002303,
.flags = IORESOURCE_MEM,
},
{
.name = "otghs_control",
.start = 0x4a00233c,
.end = 0x4a00233f,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device omap4_control_usb = {
.name = "omap-control-usb",
.id = -1,
.dev = {
.platform_data = &omap4_control_usb_pdata,
},
.num_resources = 2,
.resource = omap4_control_usb_res,
};
static inline void __init omap_init_control_usb(void)
{
if (!cpu_is_omap44xx())
return;
if (platform_device_register(&omap4_control_usb))
pr_err("Error registering omap_control_usb device\n");
}
#else
static inline void omap_init_control_usb(void) { }
#endif /* CONFIG_OMAP_CONTROL_USB */
int __init omap4_keyboard_init(struct omap4_keypad_platform_data
*sdp4430_keypad_data, struct omap_board_data *bdata)
{
......@@ -687,7 +643,6 @@ static int __init omap2_init_devices(void)
omap_init_mbox();
/* If dtb is there, the devices will be created dynamically */
if (!of_have_populated_dt()) {
omap_init_control_usb();
omap_init_dmic();
omap_init_mcpdm();
omap_init_mcspi();
......
arch/arm/mach-omap2/usb-host.c
View file @ 608d1938
......@@ -188,125 +188,6 @@ static void __init setup_ehci_io_mux(const enum usbhs_omap_port_mode *port_mode)
return;
}
static
void __init setup_4430ehci_io_mux(const enum usbhs_omap_port_mode *port_mode)
{
switch (port_mode[0]) {
case OMAP_EHCI_PORT_MODE_PHY:
omap_mux_init_signal("usbb1_ulpiphy_stp",
OMAP_PIN_OUTPUT);
omap_mux_init_signal("usbb1_ulpiphy_clk",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("usbb1_ulpiphy_dir",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("usbb1_ulpiphy_nxt",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("usbb1_ulpiphy_dat0",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("usbb1_ulpiphy_dat1",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("usbb1_ulpiphy_dat2",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("usbb1_ulpiphy_dat3",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("usbb1_ulpiphy_dat4",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("usbb1_ulpiphy_dat5",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("usbb1_ulpiphy_dat6",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("usbb1_ulpiphy_dat7",
OMAP_PIN_INPUT_PULLDOWN);
break;
case OMAP_EHCI_PORT_MODE_TLL:
omap_mux_init_signal("usbb1_ulpitll_stp",
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("usbb1_ulpitll_clk",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("usbb1_ulpitll_dir",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("usbb1_ulpitll_nxt",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("usbb1_ulpitll_dat0",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("usbb1_ulpitll_dat1",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("usbb1_ulpitll_dat2",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("usbb1_ulpitll_dat3",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("usbb1_ulpitll_dat4",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("usbb1_ulpitll_dat5",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("usbb1_ulpitll_dat6",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("usbb1_ulpitll_dat7",
OMAP_PIN_INPUT_PULLDOWN);
break;
case OMAP_USBHS_PORT_MODE_UNUSED:
default:
break;
}
switch (port_mode[1]) {
case OMAP_EHCI_PORT_MODE_PHY:
omap_mux_init_signal("usbb2_ulpiphy_stp",
OMAP_PIN_OUTPUT);
omap_mux_init_signal("usbb2_ulpiphy_clk",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("usbb2_ulpiphy_dir",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("usbb2_ulpiphy_nxt",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("usbb2_ulpiphy_dat0",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("usbb2_ulpiphy_dat1",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("usbb2_ulpiphy_dat2",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("usbb2_ulpiphy_dat3",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("usbb2_ulpiphy_dat4",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("usbb2_ulpiphy_dat5",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("usbb2_ulpiphy_dat6",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("usbb2_ulpiphy_dat7",
OMAP_PIN_INPUT_PULLDOWN);
break;
case OMAP_EHCI_PORT_MODE_TLL:
omap_mux_init_signal("usbb2_ulpitll_stp",
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("usbb2_ulpitll_clk",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("usbb2_ulpitll_dir",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("usbb2_ulpitll_nxt",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("usbb2_ulpitll_dat0",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("usbb2_ulpitll_dat1",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("usbb2_ulpitll_dat2",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("usbb2_ulpitll_dat3",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("usbb2_ulpitll_dat4",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("usbb2_ulpitll_dat5",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("usbb2_ulpitll_dat6",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("usbb2_ulpitll_dat7",
OMAP_PIN_INPUT_PULLDOWN);
break;
case OMAP_USBHS_PORT_MODE_UNUSED:
default:
break;
}
}
static void __init setup_ohci_io_mux(const enum usbhs_omap_port_mode *port_mode)
{
switch (port_mode[0]) {
......@@ -404,78 +285,6 @@ static void __init setup_ohci_io_mux(const enum usbhs_omap_port_mode *port_mode)
}
}
static
void __init setup_4430ohci_io_mux(const enum usbhs_omap_port_mode *port_mode)
{
switch (port_mode[0]) {
case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
omap_mux_init_signal("usbb1_mm_rxdp",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("usbb1_mm_rxdm",
OMAP_PIN_INPUT_PULLDOWN);
case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
omap_mux_init_signal("usbb1_mm_rxrcv",
OMAP_PIN_INPUT_PULLDOWN);
case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
omap_mux_init_signal("usbb1_mm_txen",
OMAP_PIN_INPUT_PULLDOWN);
case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
omap_mux_init_signal("usbb1_mm_txdat",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("usbb1_mm_txse0",
OMAP_PIN_INPUT_PULLDOWN);
break;
case OMAP_USBHS_PORT_MODE_UNUSED:
default:
break;
}
switch (port_mode[1]) {
case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
omap_mux_init_signal("usbb2_mm_rxdp",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("usbb2_mm_rxdm",
OMAP_PIN_INPUT_PULLDOWN);
case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
omap_mux_init_signal("usbb2_mm_rxrcv",
OMAP_PIN_INPUT_PULLDOWN);
case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
omap_mux_init_signal("usbb2_mm_txen",
OMAP_PIN_INPUT_PULLDOWN);
case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
omap_mux_init_signal("usbb2_mm_txdat",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("usbb2_mm_txse0",
OMAP_PIN_INPUT_PULLDOWN);
break;
case OMAP_USBHS_PORT_MODE_UNUSED:
default:
break;
}
}
void __init usbhs_init(struct usbhs_omap_platform_data *pdata)
{
struct omap_hwmod *uhh_hwm, *tll_hwm;
......@@ -489,9 +298,6 @@ void __init usbhs_init(struct usbhs_omap_platform_data *pdata)
if (omap_rev() <= OMAP3430_REV_ES2_1)
pdata->single_ulpi_bypass = true;
} else if (cpu_is_omap44xx()) {
setup_4430ehci_io_mux(pdata->port_mode);
setup_4430ohci_io_mux(pdata->port_mode);
}
uhh_hwm = omap_hwmod_lookup(USBHS_UHH_HWMODNAME);
......
arch/arm/mach-omap2/usb-musb.c
View file @ 608d1938
......@@ -85,9 +85,6 @@ void __init usb_musb_init(struct omap_musb_board_data *musb_board_data)
musb_plat.mode = board_data->mode;
musb_plat.extvbus = board_data->extvbus;
if (cpu_is_omap44xx())
musb_plat.has_mailbox = true;
if (soc_is_am35xx()) {
oh_name = "am35x_otg_hs";
name = "musb-am35x";
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7