Merge branch 'pm-cpufreq'

* pm-cpufreq: (22 commits)
  cpufreq: stats: Handle the case when trans_table goes beyond PAGE_SIZE
  cpufreq: arm_big_little: make cpufreq_arm_bL_ops structures const
  cpufreq: arm_big_little: make function arguments and structure pointer const
  cpufreq: pxa: convert to clock API
  cpufreq: speedstep-lib: mark expected switch fall-through
  cpufreq: ti-cpufreq: add missing of_node_put()
  cpufreq: dt: Remove support for Exynos4212 SoCs
  cpufreq: imx6q: Move speed grading check to cpufreq driver
  cpufreq: ti-cpufreq: kfree opp_data when failure
  cpufreq: SPEAr: pr_err() strings should end with newlines
  cpufreq: powernow-k8: pr_err() strings should end with newlines
  cpufreq: dt-platdev: drop socionext,uniphier-ld6b from whitelist
  arm64: wire cpu-invariant accounting support up to the task scheduler
  arm64: wire frequency-invariant accounting support up to the task scheduler
  arm: wire cpu-invariant accounting support up to the task scheduler
  arm: wire frequency-invariant accounting support up to the task scheduler
  drivers base/arch_topology: allow inlining cpu-invariant accounting support
  drivers base/arch_topology: provide frequency-invariant accounting support
  cpufreq: dt: invoke frequency-invariance setter function
  cpufreq: arm_big_little: invoke frequency-invariance setter function
  ...

Documentation/cpu-freq/cpufreq-stats.txt

@@ -90,6 +90,9 @@ Freq_i to Freq_j. Freq_i is in descending order with increasing rows and
 Freq_j is in descending order with increasing columns. The output here also 
 contains the actual freq values for each row and column for better readability.
 
+If the transition table is bigger than PAGE_SIZE, reading this will
+return an -EFBIG error.
+
 --------------------------------------------------------------------------------
 <mysystem>:/sys/devices/system/cpu/cpu0/cpufreq/stats # cat trans_table
    From  :    To

arch/arm/include/asm/topology.h

@@ -25,6 +25,14 @@ void init_cpu_topology(void);
 void store_cpu_topology(unsigned int cpuid);
 const struct cpumask *cpu_coregroup_mask(int cpu);
 
+#include <linux/arch_topology.h>
+
+/* Replace task scheduler's default frequency-invariant accounting */
+#define arch_scale_freq_capacity topology_get_freq_scale
+
+/* Replace task scheduler's default cpu-invariant accounting */
+#define arch_scale_cpu_capacity topology_get_cpu_scale
+
 #else
 
 static inline void init_cpu_topology(void) { }

arch/arm/mach-imx/mach-imx6q.c

@@ -286,88 +286,6 @@ static void __init imx6q_init_machine(void)
 	imx6q_axi_init();
 }
 
-#define OCOTP_CFG3			0x440
-#define OCOTP_CFG3_SPEED_SHIFT		16
-#define OCOTP_CFG3_SPEED_1P2GHZ		0x3
-#define OCOTP_CFG3_SPEED_996MHZ		0x2
-#define OCOTP_CFG3_SPEED_852MHZ		0x1
-
-static void __init imx6q_opp_check_speed_grading(struct device *cpu_dev)
-{
-	struct device_node *np;
-	void __iomem *base;
-	u32 val;
-
-	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-ocotp");
-	if (!np) {
-		pr_warn("failed to find ocotp node\n");
-		return;
-	}
-
-	base = of_iomap(np, 0);
-	if (!base) {
-		pr_warn("failed to map ocotp\n");
-		goto put_node;
-	}
-
-	/*
-	 * SPEED_GRADING[1:0] defines the max speed of ARM:
-	 * 2b'11: 1200000000Hz;
-	 * 2b'10: 996000000Hz;
-	 * 2b'01: 852000000Hz; -- i.MX6Q Only, exclusive with 996MHz.
-	 * 2b'00: 792000000Hz;
-	 * We need to set the max speed of ARM according to fuse map.
-	 */
-	val = readl_relaxed(base + OCOTP_CFG3);
-	val >>= OCOTP_CFG3_SPEED_SHIFT;
-	val &= 0x3;
-
-	if ((val != OCOTP_CFG3_SPEED_1P2GHZ) && cpu_is_imx6q())
-		if (dev_pm_opp_disable(cpu_dev, 1200000000))
-			pr_warn("failed to disable 1.2 GHz OPP\n");
-	if (val < OCOTP_CFG3_SPEED_996MHZ)
-		if (dev_pm_opp_disable(cpu_dev, 996000000))
-			pr_warn("failed to disable 996 MHz OPP\n");
-	if (cpu_is_imx6q()) {
-		if (val != OCOTP_CFG3_SPEED_852MHZ)
-			if (dev_pm_opp_disable(cpu_dev, 852000000))
-				pr_warn("failed to disable 852 MHz OPP\n");
-	}
-	iounmap(base);
-put_node:
-	of_node_put(np);
-}
-
-static void __init imx6q_opp_init(void)
-{
-	struct device_node *np;
-	struct device *cpu_dev = get_cpu_device(0);
-
-	if (!cpu_dev) {
-		pr_warn("failed to get cpu0 device\n");
-		return;
-	}
-	np = of_node_get(cpu_dev->of_node);
-	if (!np) {
-		pr_warn("failed to find cpu0 node\n");
-		return;
-	}
-
-	if (dev_pm_opp_of_add_table(cpu_dev)) {
-		pr_warn("failed to init OPP table\n");
-		goto put_node;
-	}
-
-	imx6q_opp_check_speed_grading(cpu_dev);
-
-put_node:
-	of_node_put(np);
-}
-
-static struct platform_device imx6q_cpufreq_pdev = {
-	.name = "imx6q-cpufreq",
-};
-
 static void __init imx6q_init_late(void)
 {
 	/*
@@ -377,10 +295,8 @@ static void __init imx6q_init_late(void)
 	if (imx_get_soc_revision() > IMX_CHIP_REVISION_1_1)
 		imx6q_cpuidle_init();
 
-	if (IS_ENABLED(CONFIG_ARM_IMX6Q_CPUFREQ)) {
-		imx6q_opp_init();
-		platform_device_register(&imx6q_cpufreq_pdev);
-	}
+	if (IS_ENABLED(CONFIG_ARM_IMX6Q_CPUFREQ))
+		platform_device_register_simple("imx6q-cpufreq", -1, NULL, 0);
 }
 
 static void __init imx6q_map_io(void)

arch/arm64/include/asm/topology.h

@@ -33,6 +33,14 @@ int pcibus_to_node(struct pci_bus *bus);
 
 #endif /* CONFIG_NUMA */
 
+#include <linux/arch_topology.h>
+
+/* Replace task scheduler's default frequency-invariant accounting */
+#define arch_scale_freq_capacity topology_get_freq_scale
+
+/* Replace task scheduler's default cpu-invariant accounting */
+#define arch_scale_cpu_capacity topology_get_cpu_scale
+
 #include <asm-generic/topology.h>
 
 #endif /* _ASM_ARM_TOPOLOGY_H */

drivers/base/arch_topology.c

@@ -22,14 +22,23 @@
 #include <linux/string.h>
 #include <linux/sched/topology.h>
 
-static DEFINE_MUTEX(cpu_scale_mutex);
-static DEFINE_PER_CPU(unsigned long, cpu_scale) = SCHED_CAPACITY_SCALE;
+DEFINE_PER_CPU(unsigned long, freq_scale) = SCHED_CAPACITY_SCALE;
 
-unsigned long topology_get_cpu_scale(struct sched_domain *sd, int cpu)
+void arch_set_freq_scale(struct cpumask *cpus, unsigned long cur_freq,
+			 unsigned long max_freq)
 {
-	return per_cpu(cpu_scale, cpu);
+	unsigned long scale;
+	int i;
+
+	scale = (cur_freq << SCHED_CAPACITY_SHIFT) / max_freq;
+
+	for_each_cpu(i, cpus)
+		per_cpu(freq_scale, i) = scale;
 }
 
+static DEFINE_MUTEX(cpu_scale_mutex);
+DEFINE_PER_CPU(unsigned long, cpu_scale) = SCHED_CAPACITY_SCALE;
+
 void topology_set_cpu_scale(unsigned int cpu, unsigned long capacity)
 {
 	per_cpu(cpu_scale, cpu) = capacity;
@@ -212,6 +221,8 @@ static struct notifier_block init_cpu_capacity_notifier __initdata = {
 
 static int __init register_cpufreq_notifier(void)
 {
+	int ret;
+
 	/*
 	 * on ACPI-based systems we need to use the default cpu capacity
 	 * until we have the necessary code to parse the cpu capacity, so
@@ -227,8 +238,13 @@ static int __init register_cpufreq_notifier(void)
 
 	cpumask_copy(cpus_to_visit, cpu_possible_mask);
 
-	return cpufreq_register_notifier(&init_cpu_capacity_notifier,
-					 CPUFREQ_POLICY_NOTIFIER);
+	ret = cpufreq_register_notifier(&init_cpu_capacity_notifier,
+					CPUFREQ_POLICY_NOTIFIER);
+
+	if (ret)
+		free_cpumask_var(cpus_to_visit);
+
+	return ret;
 }
 core_initcall(register_cpufreq_notifier);
 
@@ -236,6 +252,7 @@ static void __init parsing_done_workfn(struct work_struct *work)
 {
 	cpufreq_unregister_notifier(&init_cpu_capacity_notifier,
 					 CPUFREQ_POLICY_NOTIFIER);
+	free_cpumask_var(cpus_to_visit);
 }
 
 #else

drivers/cpufreq/arm_big_little.c

@@ -57,7 +57,7 @@ static bool bL_switching_enabled;
 #define VIRT_FREQ(cluster, freq)    ((cluster == A7_CLUSTER) ? freq >> 1 : freq)
 
 static struct thermal_cooling_device *cdev[MAX_CLUSTERS];
-static struct cpufreq_arm_bL_ops *arm_bL_ops;
+static const struct cpufreq_arm_bL_ops *arm_bL_ops;
 static struct clk *clk[MAX_CLUSTERS];
 static struct cpufreq_frequency_table *freq_table[MAX_CLUSTERS + 1];
 static atomic_t cluster_usage[MAX_CLUSTERS + 1];
@@ -213,6 +213,7 @@ static int bL_cpufreq_set_target(struct cpufreq_policy *policy,
 {
 	u32 cpu = policy->cpu, cur_cluster, new_cluster, actual_cluster;
 	unsigned int freqs_new;
+	int ret;
 
 	cur_cluster = cpu_to_cluster(cpu);
 	new_cluster = actual_cluster = per_cpu(physical_cluster, cpu);
@@ -229,7 +230,14 @@ static int bL_cpufreq_set_target(struct cpufreq_policy *policy,
 		}
 	}
 
-	return bL_cpufreq_set_rate(cpu, actual_cluster, new_cluster, freqs_new);
+	ret = bL_cpufreq_set_rate(cpu, actual_cluster, new_cluster, freqs_new);
+
+	if (!ret) {
+		arch_set_freq_scale(policy->related_cpus, freqs_new,
+				    policy->cpuinfo.max_freq);
+	}
+
+	return ret;
 }
 
 static inline u32 get_table_count(struct cpufreq_frequency_table *table)
@@ -609,7 +617,7 @@ static int __bLs_register_notifier(void) { return 0; }
 static int __bLs_unregister_notifier(void) { return 0; }
 #endif
 
-int bL_cpufreq_register(struct cpufreq_arm_bL_ops *ops)
+int bL_cpufreq_register(const struct cpufreq_arm_bL_ops *ops)
 {
 	int ret, i;
 
@@ -653,7 +661,7 @@ int bL_cpufreq_register(struct cpufreq_arm_bL_ops *ops)
 }
 EXPORT_SYMBOL_GPL(bL_cpufreq_register);
 
-void bL_cpufreq_unregister(struct cpufreq_arm_bL_ops *ops)
+void bL_cpufreq_unregister(const struct cpufreq_arm_bL_ops *ops)
 {
 	if (arm_bL_ops != ops) {
 		pr_err("%s: Registered with: %s, can't unregister, exiting\n",

drivers/cpufreq/arm_big_little.h

@@ -37,7 +37,7 @@ struct cpufreq_arm_bL_ops {
 	void (*free_opp_table)(const struct cpumask *cpumask);
 };
 
-int bL_cpufreq_register(struct cpufreq_arm_bL_ops *ops);
-void bL_cpufreq_unregister(struct cpufreq_arm_bL_ops *ops);
+int bL_cpufreq_register(const struct cpufreq_arm_bL_ops *ops);
+void bL_cpufreq_unregister(const struct cpufreq_arm_bL_ops *ops);
 
 #endif /* CPUFREQ_ARM_BIG_LITTLE_H */

drivers/cpufreq/arm_big_little_dt.c

@@ -61,7 +61,7 @@ static int dt_get_transition_latency(struct device *cpu_dev)
 	return transition_latency;
 }
 
-static struct cpufreq_arm_bL_ops dt_bL_ops = {
+static const struct cpufreq_arm_bL_ops dt_bL_ops = {
 	.name	= "dt-bl",
 	.get_transition_latency = dt_get_transition_latency,
 	.init_opp_table = dev_pm_opp_of_cpumask_add_table,

drivers/cpufreq/cpufreq-dt-platdev.c

@@ -48,7 +48,6 @@ static const struct of_device_id whitelist[] __initconst = {
 
 	{ .compatible = "samsung,exynos3250", },
 	{ .compatible = "samsung,exynos4210", },
-	{ .compatible = "samsung,exynos4212", },
 	{ .compatible = "samsung,exynos5250", },
 #ifndef CONFIG_BL_SWITCHER
 	{ .compatible = "samsung,exynos5800", },
@@ -83,8 +82,6 @@ static const struct of_device_id whitelist[] __initconst = {
 	{ .compatible = "rockchip,rk3368", },
 	{ .compatible = "rockchip,rk3399", },
 
-	{ .compatible = "socionext,uniphier-ld6b", },
-
 	{ .compatible = "st-ericsson,u8500", },
 	{ .compatible = "st-ericsson,u8540", },
 	{ .compatible = "st-ericsson,u9500", },

drivers/cpufreq/cpufreq-dt.c

@@ -43,9 +43,17 @@ static struct freq_attr *cpufreq_dt_attr[] = {
 static int set_target(struct cpufreq_policy *policy, unsigned int index)
 {
 	struct private_data *priv = policy->driver_data;
+	unsigned long freq = policy->freq_table[index].frequency;
+	int ret;
+
+	ret = dev_pm_opp_set_rate(priv->cpu_dev, freq * 1000);
 
-	return dev_pm_opp_set_rate(priv->cpu_dev,
-				   policy->freq_table[index].frequency * 1000);
+	if (!ret) {
+		arch_set_freq_scale(policy->related_cpus, freq,
+				    policy->cpuinfo.max_freq);
+	}
+
+	return ret;
 }
 
 /*

drivers/cpufreq/cpufreq.c

@@ -161,6 +161,12 @@ u64 get_cpu_idle_time(unsigned int cpu, u64 *wall, int io_busy)
 }
 EXPORT_SYMBOL_GPL(get_cpu_idle_time);
 
+__weak void arch_set_freq_scale(struct cpumask *cpus, unsigned long cur_freq,
+		unsigned long max_freq)
+{
+}
+EXPORT_SYMBOL_GPL(arch_set_freq_scale);
+
 /*
  * This is a generic cpufreq init() routine which can be used by cpufreq
  * drivers of SMP systems. It will do following:

drivers/cpufreq/cpufreq_stats.c

@@ -118,8 +118,11 @@ static ssize_t show_trans_table(struct cpufreq_policy *policy, char *buf)
 			break;
 		len += snprintf(buf + len, PAGE_SIZE - len, "\n");
 	}
-	if (len >= PAGE_SIZE)
-		return PAGE_SIZE;
+
+	if (len >= PAGE_SIZE) {
+		pr_warn_once("cpufreq transition table exceeds PAGE_SIZE. Disabling\n");
+		return -EFBIG;
+	}
 	return len;
 }
 cpufreq_freq_attr_ro(trans_table);

drivers/cpufreq/imx6q-cpufreq.c

@@ -12,6 +12,7 @@
 #include <linux/err.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
 #include <linux/pm_opp.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>
@@ -191,6 +192,57 @@ static struct cpufreq_driver imx6q_cpufreq_driver = {
 	.suspend = cpufreq_generic_suspend,
 };
 
+#define OCOTP_CFG3			0x440
+#define OCOTP_CFG3_SPEED_SHIFT		16
+#define OCOTP_CFG3_SPEED_1P2GHZ		0x3
+#define OCOTP_CFG3_SPEED_996MHZ		0x2
+#define OCOTP_CFG3_SPEED_852MHZ		0x1
+
+static void imx6q_opp_check_speed_grading(struct device *dev)
+{
+	struct device_node *np;
+	void __iomem *base;
+	u32 val;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-ocotp");
+	if (!np)
+		return;
+
+	base = of_iomap(np, 0);
+	if (!base) {
+		dev_err(dev, "failed to map ocotp\n");
+		goto put_node;
+	}
+
+	/*
+	 * SPEED_GRADING[1:0] defines the max speed of ARM:
+	 * 2b'11: 1200000000Hz;
+	 * 2b'10: 996000000Hz;
+	 * 2b'01: 852000000Hz; -- i.MX6Q Only, exclusive with 996MHz.
+	 * 2b'00: 792000000Hz;
+	 * We need to set the max speed of ARM according to fuse map.
+	 */
+	val = readl_relaxed(base + OCOTP_CFG3);
+	val >>= OCOTP_CFG3_SPEED_SHIFT;
+	val &= 0x3;
+
+	if ((val != OCOTP_CFG3_SPEED_1P2GHZ) &&
+	     of_machine_is_compatible("fsl,imx6q"))
+		if (dev_pm_opp_disable(dev, 1200000000))
+			dev_warn(dev, "failed to disable 1.2GHz OPP\n");
+	if (val < OCOTP_CFG3_SPEED_996MHZ)
+		if (dev_pm_opp_disable(dev, 996000000))
+			dev_warn(dev, "failed to disable 996MHz OPP\n");
+	if (of_machine_is_compatible("fsl,imx6q")) {
+		if (val != OCOTP_CFG3_SPEED_852MHZ)
+			if (dev_pm_opp_disable(dev, 852000000))
+				dev_warn(dev, "failed to disable 852MHz OPP\n");
+	}
+	iounmap(base);
+put_node:
+	of_node_put(np);
+}
+
 static int imx6q_cpufreq_probe(struct platform_device *pdev)
 {
 	struct device_node *np;
@@ -252,28 +304,21 @@ static int imx6q_cpufreq_probe(struct platform_device *pdev)
 		goto put_reg;
 	}
 
-	/*
-	 * We expect an OPP table supplied by platform.
-	 * Just, incase the platform did not supply the OPP
-	 * table, it will try to get it.
-	 */
-	num = dev_pm_opp_get_opp_count(cpu_dev);
-	if (num < 0) {
-		ret = dev_pm_opp_of_add_table(cpu_dev);
-		if (ret < 0) {
-			dev_err(cpu_dev, "failed to init OPP table: %d\n", ret);
-			goto put_reg;
-		}
+	ret = dev_pm_opp_of_add_table(cpu_dev);
+	if (ret < 0) {
+		dev_err(cpu_dev, "failed to init OPP table: %d\n", ret);
+		goto put_reg;
+	}
 
-		/* Because we have added the OPPs here, we must free them */
-		free_opp = true;
+	imx6q_opp_check_speed_grading(cpu_dev);
 
-		num = dev_pm_opp_get_opp_count(cpu_dev);
-		if (num < 0) {
-			ret = num;
-			dev_err(cpu_dev, "no OPP table is found: %d\n", ret);
-			goto out_free_opp;
-		}
+	/* Because we have added the OPPs here, we must free them */
+	free_opp = true;
+	num = dev_pm_opp_get_opp_count(cpu_dev);
+	if (num < 0) {
+		ret = num;
+		dev_err(cpu_dev, "no OPP table is found: %d\n", ret);
+		goto out_free_opp;
 	}
 
 	ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table);

drivers/cpufreq/powernow-k8.c

@@ -1043,7 +1043,7 @@ static int powernowk8_cpu_init(struct cpufreq_policy *pol)
 
 	data = kzalloc(sizeof(*data), GFP_KERNEL);
 	if (!data) {
-		pr_err("unable to alloc powernow_k8_data");
+		pr_err("unable to alloc powernow_k8_data\n");
 		return -ENOMEM;
 	}
 

drivers/cpufreq/pxa2xx-cpufreq.c

@@ -58,56 +58,40 @@ module_param(pxa27x_maxfreq, uint, 0);
 MODULE_PARM_DESC(pxa27x_maxfreq, "Set the pxa27x maxfreq in MHz"
 		 "(typically 624=>pxa270, 416=>pxa271, 520=>pxa272)");
 
+struct pxa_cpufreq_data {
+	struct clk *clk_core;
+};
+static struct pxa_cpufreq_data  pxa_cpufreq_data;
+
 struct pxa_freqs {
 	unsigned int khz;
-	unsigned int membus;
-	unsigned int cccr;
-	unsigned int div2;
-	unsigned int cclkcfg;
 	int vmin;
 	int vmax;
 };
 
-/* Define the refresh period in mSec for the SDRAM and the number of rows */
-#define SDRAM_TREF	64	/* standard 64ms SDRAM */
-static unsigned int sdram_rows;
-
-#define CCLKCFG_TURBO		0x1
-#define CCLKCFG_FCS		0x2
-#define CCLKCFG_HALFTURBO	0x4
-#define CCLKCFG_FASTBUS		0x8
-#define MDREFR_DB2_MASK		(MDREFR_K2DB2 | MDREFR_K1DB2)
-#define MDREFR_DRI_MASK		0xFFF
-
-#define MDCNFG_DRAC2(mdcnfg) (((mdcnfg) >> 21) & 0x3)
-#define MDCNFG_DRAC0(mdcnfg) (((mdcnfg) >> 5) & 0x3)
-
 /*
  * PXA255 definitions
  */
-/* Use the run mode frequencies for the CPUFREQ_POLICY_PERFORMANCE policy */
-#define CCLKCFG			CCLKCFG_TURBO | CCLKCFG_FCS
-
 static const struct pxa_freqs pxa255_run_freqs[] =
 {
-	/* CPU   MEMBUS  CCCR  DIV2 CCLKCFG	           run  turbo PXbus SDRAM */
-	{ 99500,  99500, 0x121, 1,  CCLKCFG, -1, -1},	/*  99,   99,   50,   50  */
-	{132700, 132700, 0x123, 1,  CCLKCFG, -1, -1},	/* 133,  133,   66,   66  */
-	{199100,  99500, 0x141, 0,  CCLKCFG, -1, -1},	/* 199,  199,   99,   99  */
-	{265400, 132700, 0x143, 1,  CCLKCFG, -1, -1},	/* 265,  265,  133,   66  */
-	{331800, 165900, 0x145, 1,  CCLKCFG, -1, -1},	/* 331,  331,  166,   83  */
-	{398100,  99500, 0x161, 0,  CCLKCFG, -1, -1},	/* 398,  398,  196,   99  */
+	/* CPU   MEMBUS		   run  turbo PXbus SDRAM */
+	{ 99500, -1, -1},	/*  99,   99,   50,   50  */
+	{132700, -1, -1},	/* 133,  133,   66,   66  */
+	{199100, -1, -1},	/* 199,  199,   99,   99  */
+	{265400, -1, -1},	/* 265,  265,  133,   66  */
+	{331800, -1, -1},	/* 331,  331,  166,   83  */
+	{398100, -1, -1},	/* 398,  398,  196,   99  */
 };
 
 /* Use the turbo mode frequencies for the CPUFREQ_POLICY_POWERSAVE policy */
 static const struct pxa_freqs pxa255_turbo_freqs[] =
 {
-	/* CPU   MEMBUS  CCCR  DIV2 CCLKCFG	   run  turbo PXbus SDRAM */
-	{ 99500, 99500,  0x121, 1,  CCLKCFG, -1, -1},	/*  99,   99,   50,   50  */
-	{199100, 99500,  0x221, 0,  CCLKCFG, -1, -1},	/*  99,  199,   50,   99  */
-	{298500, 99500,  0x321, 0,  CCLKCFG, -1, -1},	/*  99,  287,   50,   99  */
-	{298600, 99500,  0x1c1, 0,  CCLKCFG, -1, -1},	/* 199,  287,   99,   99  */
-	{398100, 99500,  0x241, 0,  CCLKCFG, -1, -1},	/* 199,  398,   99,   99  */
+	/* CPU			   run  turbo PXbus SDRAM */
+	{ 99500, -1, -1},	/*  99,   99,   50,   50  */
+	{199100, -1, -1},	/*  99,  199,   50,   99  */
+	{298500, -1, -1},	/*  99,  287,   50,   99  */
+	{298600, -1, -1},	/* 199,  287,   99,   99  */
+	{398100, -1, -1},	/* 199,  398,   99,   99  */
 };
 
 #define NUM_PXA25x_RUN_FREQS ARRAY_SIZE(pxa255_run_freqs)
@@ -122,47 +106,14 @@ static unsigned int pxa255_turbo_table;
 module_param(pxa255_turbo_table, uint, 0);
 MODULE_PARM_DESC(pxa255_turbo_table, "Selects the frequency table (0 = run table, !0 = turbo table)");
 
-/*
- * PXA270 definitions
- *
- * For the PXA27x:
- * Control variables are A, L, 2N for CCCR; B, HT, T for CLKCFG.
- *
- * A = 0 => memory controller clock from table 3-7,
- * A = 1 => memory controller clock = system bus clock
- * Run mode frequency	= 13 MHz * L
- * Turbo mode frequency = 13 MHz * L * N
- * System bus frequency = 13 MHz * L / (B + 1)
- *
- * In CCCR:
- * A = 1
- * L = 16	  oscillator to run mode ratio
- * 2N = 6	  2 * (turbo mode to run mode ratio)
- *
- * In CCLKCFG:
- * B = 1	  Fast bus mode
- * HT = 0	  Half-Turbo mode
- * T = 1	  Turbo mode
- *
- * For now, just support some of the combinations in table 3-7 of
- * PXA27x Processor Family Developer's Manual to simplify frequency
- * change sequences.
- */
-#define PXA27x_CCCR(A, L, N2) (A << 25 | N2 << 7 | L)
-#define CCLKCFG2(B, HT, T) \
-  (CCLKCFG_FCS | \
-   ((B)  ? CCLKCFG_FASTBUS : 0) | \
-   ((HT) ? CCLKCFG_HALFTURBO : 0) | \
-   ((T)  ? CCLKCFG_TURBO : 0))
-
 static struct pxa_freqs pxa27x_freqs[] = {
-	{104000, 104000, PXA27x_CCCR(1,	 8, 2), 0, CCLKCFG2(1, 0, 1),  900000, 1705000 },
-	{156000, 104000, PXA27x_CCCR(1,	 8, 3), 0, CCLKCFG2(1, 0, 1), 1000000, 1705000 },
-	{208000, 208000, PXA27x_CCCR(0, 16, 2), 1, CCLKCFG2(0, 0, 1), 1180000, 1705000 },
-	{312000, 208000, PXA27x_CCCR(1, 16, 3), 1, CCLKCFG2(1, 0, 1), 1250000, 1705000 },
-	{416000, 208000, PXA27x_CCCR(1, 16, 4), 1, CCLKCFG2(1, 0, 1), 1350000, 1705000 },
-	{520000, 208000, PXA27x_CCCR(1, 16, 5), 1, CCLKCFG2(1, 0, 1), 1450000, 1705000 },
-	{624000, 208000, PXA27x_CCCR(1, 16, 6), 1, CCLKCFG2(1, 0, 1), 1550000, 1705000 }
+	{104000,  900000, 1705000 },
+	{156000, 1000000, 1705000 },
+	{208000, 1180000, 1705000 },
+	{312000, 1250000, 1705000 },
+	{416000, 1350000, 1705000 },
+	{520000, 1450000, 1705000 },
+	{624000, 1550000, 1705000 }
 };
 
 #define NUM_PXA27x_FREQS ARRAY_SIZE(pxa27x_freqs)
@@ -241,51 +192,29 @@ static void pxa27x_guess_max_freq(void)
 	}
 }
 
-static void init_sdram_rows(void)
-{
-	uint32_t mdcnfg = __raw_readl(MDCNFG);
-	unsigned int drac2 = 0, drac0 = 0;
-
-	if (mdcnfg & (MDCNFG_DE2 | MDCNFG_DE3))
-		drac2 = MDCNFG_DRAC2(mdcnfg);
-
-	if (mdcnfg & (MDCNFG_DE0 | MDCNFG_DE1))
-		drac0 = MDCNFG_DRAC0(mdcnfg);
-
-	sdram_rows = 1 << (11 + max(drac0, drac2));
-}
-
-static u32 mdrefr_dri(unsigned int freq)
-{
-	u32 interval = freq * SDRAM_TREF / sdram_rows;
-
-	return (interval - (cpu_is_pxa27x() ? 31 : 0)) / 32;
-}
-
 static unsigned int pxa_cpufreq_get(unsigned int cpu)
 {
-	return get_clk_frequency_khz(0);
+	struct pxa_cpufreq_data *data = cpufreq_get_driver_data();
+
+	return (unsigned int) clk_get_rate(data->clk_core) / 1000;
 }
 
 static int pxa_set_target(struct cpufreq_policy *policy, unsigned int idx)
 {
 	struct cpufreq_frequency_table *pxa_freqs_table;
 	const struct pxa_freqs *pxa_freq_settings;
-	unsigned long flags;
-	unsigned int new_freq_cpu, new_freq_mem;
-	unsigned int unused, preset_mdrefr, postset_mdrefr, cclkcfg;
+	struct pxa_cpufreq_data *data = cpufreq_get_driver_data();
+	unsigned int new_freq_cpu;
 	int ret = 0;
 
 	/* Get the current policy */
 	find_freq_tables(&pxa_freqs_table, &pxa_freq_settings);
 
 	new_freq_cpu = pxa_freq_settings[idx].khz;
-	new_freq_mem = pxa_freq_settings[idx].membus;
 
 	if (freq_debug)
-		pr_debug("Changing CPU frequency to %d Mhz, (SDRAM %d Mhz)\n",
-			 new_freq_cpu / 1000, (pxa_freq_settings[idx].div2) ?
-			 (new_freq_mem / 2000) : (new_freq_mem / 1000));
+		pr_debug("Changing CPU frequency from %d Mhz to %d Mhz\n",
+			 policy->cur / 1000,  new_freq_cpu / 1000);
 
 	if (vcc_core && new_freq_cpu > policy->cur) {
 		ret = pxa_cpufreq_change_voltage(&pxa_freq_settings[idx]);
@@ -293,53 +222,7 @@ static int pxa_set_target(struct cpufreq_policy *policy, unsigned int idx)
 			return ret;
 	}
 
-	/* Calculate the next MDREFR.  If we're slowing down the SDRAM clock
-	 * we need to preset the smaller DRI before the change.	 If we're
-	 * speeding up we need to set the larger DRI value after the change.
-	 */
-	preset_mdrefr = postset_mdrefr = __raw_readl(MDREFR);
-	if ((preset_mdrefr & MDREFR_DRI_MASK) > mdrefr_dri(new_freq_mem)) {
-		preset_mdrefr = (preset_mdrefr & ~MDREFR_DRI_MASK);
-		preset_mdrefr |= mdrefr_dri(new_freq_mem);
-	}
-	postset_mdrefr =
-		(postset_mdrefr & ~MDREFR_DRI_MASK) | mdrefr_dri(new_freq_mem);
-
-	/* If we're dividing the memory clock by two for the SDRAM clock, this
-	 * must be set prior to the change.  Clearing the divide must be done
-	 * after the change.
-	 */
-	if (pxa_freq_settings[idx].div2) {
-		preset_mdrefr  |= MDREFR_DB2_MASK;
-		postset_mdrefr |= MDREFR_DB2_MASK;
-	} else {
-		postset_mdrefr &= ~MDREFR_DB2_MASK;
-	}
-
-	local_irq_save(flags);
-
-	/* Set new the CCCR and prepare CCLKCFG */
-	writel(pxa_freq_settings[idx].cccr, CCCR);
-	cclkcfg = pxa_freq_settings[idx].cclkcfg;
-
-	asm volatile("							\n\
-		ldr	r4, [%1]		/* load MDREFR */	\n\
-		b	2f						\n\
-		.align	5						\n\
-1:									\n\
-		str	%3, [%1]		/* preset the MDREFR */	\n\
-		mcr	p14, 0, %2, c6, c0, 0	/* set CCLKCFG[FCS] */	\n\
-		str	%4, [%1]		/* postset the MDREFR */ \n\
-									\n\
-		b	3f						\n\
-2:		b	1b						\n\
-3:		nop							\n\
-	  "
-		     : "=&r" (unused)
-		     : "r" (MDREFR), "r" (cclkcfg),
-		       "r" (preset_mdrefr), "r" (postset_mdrefr)
-		     : "r4", "r5");
-	local_irq_restore(flags);
+	clk_set_rate(data->clk_core, new_freq_cpu * 1000);
 
 	/*
 	 * Even if voltage setting fails, we don't report it, as the frequency
@@ -369,8 +252,6 @@ static int pxa_cpufreq_init(struct cpufreq_policy *policy)
 
 	pxa_cpufreq_init_voltages();
 
-	init_sdram_rows();
-
 	/* set default policy and cpuinfo */
 	policy->cpuinfo.transition_latency = 1000; /* FIXME: 1 ms, assumed */
 
@@ -429,11 +310,17 @@ static struct cpufreq_driver pxa_cpufreq_driver = {
 	.init	= pxa_cpufreq_init,
 	.get	= pxa_cpufreq_get,
 	.name	= "PXA2xx",
+	.driver_data = &pxa_cpufreq_data,
 };
 
 static int __init pxa_cpu_init(void)
 {
 	int ret = -ENODEV;
+
+	pxa_cpufreq_data.clk_core = clk_get_sys(NULL, "core");
+	if (IS_ERR(pxa_cpufreq_data.clk_core))
+		return PTR_ERR(pxa_cpufreq_data.clk_core);
+
 	if (cpu_is_pxa25x() || cpu_is_pxa27x())
 		ret = cpufreq_register_driver(&pxa_cpufreq_driver);
 	return ret;

drivers/cpufreq/scpi-cpufreq.c

@@ -53,7 +53,7 @@ static int scpi_init_opp_table(const struct cpumask *cpumask)
 	return ret;
 }
 
-static struct cpufreq_arm_bL_ops scpi_cpufreq_ops = {
+static const struct cpufreq_arm_bL_ops scpi_cpufreq_ops = {
 	.name	= "scpi",
 	.get_transition_latency = scpi_get_transition_latency,
 	.init_opp_table = scpi_init_opp_table,

drivers/cpufreq/spear-cpufreq.c

@@ -177,7 +177,7 @@ static int spear_cpufreq_probe(struct platform_device *pdev)
 
 	np = of_cpu_device_node_get(0);
 	if (!np) {
-		pr_err("No cpu node found");
+		pr_err("No cpu node found\n");
 		return -ENODEV;
 	}
 
@@ -187,7 +187,7 @@ static int spear_cpufreq_probe(struct platform_device *pdev)
 
 	prop = of_find_property(np, "cpufreq_tbl", NULL);
 	if (!prop || !prop->value) {
-		pr_err("Invalid cpufreq_tbl");
+		pr_err("Invalid cpufreq_tbl\n");
 		ret = -ENODEV;
 		goto out_put_node;
 	}

drivers/cpufreq/speedstep-lib.c

@@ -367,7 +367,7 @@ unsigned int speedstep_detect_processor(void)
 			} else
 				return SPEEDSTEP_CPU_PIII_C;
 		}
-
+		/* fall through */
 	default:
 		return 0;
 	}

drivers/cpufreq/ti-cpufreq.c

@@ -205,6 +205,7 @@ static int ti_cpufreq_init(void)
 
 	np = of_find_node_by_path("/");
 	match = of_match_node(ti_cpufreq_of_match, np);
+	of_node_put(np);
 	if (!match)
 		return -ENODEV;
 
@@ -217,7 +218,8 @@ static int ti_cpufreq_init(void)
 	opp_data->cpu_dev = get_cpu_device(0);
 	if (!opp_data->cpu_dev) {
 		pr_err("%s: Failed to get device for CPU0\n", __func__);
-		return -ENODEV;
+		ret = ENODEV;
+		goto free_opp_data;
 	}
 
 	opp_data->opp_node = dev_pm_opp_of_get_opp_desc_node(opp_data->cpu_dev);
@@ -262,6 +264,8 @@ static int ti_cpufreq_init(void)
 
 fail_put_node:
 	of_node_put(opp_data->opp_node);
+free_opp_data:
+	kfree(opp_data);
 
 	return ret;
 }

drivers/cpufreq/vexpress-spc-cpufreq.c

@@ -42,7 +42,7 @@ static int ve_spc_get_transition_latency(struct device *cpu_dev)
 	return 1000000; /* 1 ms */
 }
 
-static struct cpufreq_arm_bL_ops ve_spc_cpufreq_ops = {
+static const struct cpufreq_arm_bL_ops ve_spc_cpufreq_ops = {
 	.name	= "vexpress-spc",
 	.get_transition_latency = ve_spc_get_transition_latency,
 	.init_opp_table = ve_spc_init_opp_table,

include/linux/arch_topology.h

@@ -6,15 +6,30 @@
 #define _LINUX_ARCH_TOPOLOGY_H_
 
 #include <linux/types.h>
+#include <linux/percpu.h>
 
 void topology_normalize_cpu_scale(void);
 
 struct device_node;
 bool topology_parse_cpu_capacity(struct device_node *cpu_node, int cpu);
 
+DECLARE_PER_CPU(unsigned long, cpu_scale);
+
 struct sched_domain;
-unsigned long topology_get_cpu_scale(struct sched_domain *sd, int cpu);
+static inline
+unsigned long topology_get_cpu_scale(struct sched_domain *sd, int cpu)
+{
+	return per_cpu(cpu_scale, cpu);
+}
 
 void topology_set_cpu_scale(unsigned int cpu, unsigned long capacity);
 
+DECLARE_PER_CPU(unsigned long, freq_scale);
+
+static inline
+unsigned long topology_get_freq_scale(struct sched_domain *sd, int cpu)
+{
+	return per_cpu(freq_scale, cpu);
+}
+
 #endif /* _LINUX_ARCH_TOPOLOGY_H_ */

include/linux/cpufreq.h

@@ -919,6 +919,9 @@ static inline bool policy_has_boost_freq(struct cpufreq_policy *policy)
 
 extern unsigned int arch_freq_get_on_cpu(int cpu);
 
+extern void arch_set_freq_scale(struct cpumask *cpus, unsigned long cur_freq,
+				unsigned long max_freq);
+
 /* the following are really really optional */
 extern struct freq_attr cpufreq_freq_attr_scaling_available_freqs;
 extern struct freq_attr cpufreq_freq_attr_scaling_boost_freqs;