Merge git://git.infradead.org/mtd-2.6

* git://git.infradead.org/mtd-2.6: (90 commits)
  jffs2: Fix long-standing bug with symlink garbage collection.
  mtd: OneNAND: Fix test of unsigned in onenand_otp_walk()
  mtd: cfi_cmdset_0002, fix lock imbalance
  Revert "mtd: move mxcnd_remove to .exit.text"
  mtd: m25p80: add support for Macronix MX25L4005A
  kmsg_dump: fix build for CONFIG_PRINTK=n
  mtd: nandsim: add support for 4KiB pages
  mtd: mtdoops: refactor as a kmsg_dumper
  mtd: mtdoops: make record size configurable
  mtd: mtdoops: limit the maximum mtd partition size
  mtd: mtdoops: keep track of used/unused pages in an array
  mtd: mtdoops: several minor cleanups
  core: Add kernel message dumper to call on oopses and panics
  mtd: add ARM pismo support
  mtd: pxa3xx_nand: Fix PIO data transfer
  mtd: nand: fix multi-chip suspend problem
  mtd: add support for switching old SST chips into QRY mode
  mtd: fix M29W800D dev_id and uaddr
  mtd: don't use PF_MEMALLOC
  mtd: Add bad block table overrides to Davinci NAND driver
  ...

Fixed up conflicts (mostly trivial) in
	drivers/mtd/devices/m25p80.c
	drivers/mtd/maps/pcmciamtd.c
	drivers/mtd/nand/pxa3xx_nand.c
	kernel/printk.c

arch/arm/mach-bcmring/arch.c

@@ -70,9 +70,19 @@ static struct ctl_table bcmring_sysctl_reboot[] = {
 	{}
 };
 
+static struct resource nand_resource[] = {
+	[0] = {
+		.start = MM_ADDR_IO_NAND,
+		.end = MM_ADDR_IO_NAND + 0x1000 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
 static struct platform_device nand_device = {
 	.name = "bcm-nand",
 	.id = -1,
+	.resource = nand_resource,
+	.num_resources	= ARRAY_SIZE(nand_resource),
 };
 
 static struct platform_device *devices[] __initdata = {

arch/arm/mach-bcmring/include/mach/reg_nand.h

+/*****************************************************************************
+* Copyright 2001 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/*
+*
+*****************************************************************************
+*
+*  REG_NAND.h
+*
+*  PURPOSE:
+*
+*     This file contains definitions for the nand registers:
+*
+*  NOTES:
+*
+*****************************************************************************/
+
+#if !defined(__ASM_ARCH_REG_NAND_H)
+#define __ASM_ARCH_REG_NAND_H
+
+/* ---- Include Files ---------------------------------------------------- */
+#include <csp/reg.h>
+#include <mach/reg_umi.h>
+
+/* ---- Constants and Types ---------------------------------------------- */
+
+#define HW_NAND_BASE       MM_IO_BASE_NAND	/* NAND Flash */
+
+/* DMA accesses by the bootstrap need hard nonvirtual addresses */
+#define REG_NAND_CMD            __REG16(HW_NAND_BASE + 0)
+#define REG_NAND_ADDR           __REG16(HW_NAND_BASE + 4)
+
+#define REG_NAND_PHYS_DATA16   (HW_NAND_BASE + 8)
+#define REG_NAND_PHYS_DATA8    (HW_NAND_BASE + 8)
+#define REG_NAND_DATA16         __REG16(REG_NAND_PHYS_DATA16)
+#define REG_NAND_DATA8          __REG8(REG_NAND_PHYS_DATA8)
+
+/* use appropriate offset to make sure it start at the 1K boundary */
+#define REG_NAND_PHYS_DATA_DMA   (HW_NAND_BASE + 0x400)
+#define REG_NAND_DATA_DMA         __REG32(REG_NAND_PHYS_DATA_DMA)
+
+/* Linux DMA requires physical address of the data register */
+#define REG_NAND_DATA16_PADDR    HW_IO_VIRT_TO_PHYS(REG_NAND_PHYS_DATA16)
+#define REG_NAND_DATA8_PADDR     HW_IO_VIRT_TO_PHYS(REG_NAND_PHYS_DATA8)
+#define REG_NAND_DATA_PADDR      HW_IO_VIRT_TO_PHYS(REG_NAND_PHYS_DATA_DMA)
+
+#define NAND_BUS_16BIT()        (0)
+#define NAND_BUS_8BIT()         (!NAND_BUS_16BIT())
+
+/* Register offsets */
+#define REG_NAND_CMD_OFFSET     (0)
+#define REG_NAND_ADDR_OFFSET    (4)
+#define REG_NAND_DATA8_OFFSET   (8)
+
+#endif

arch/arm/mach-davinci/include/mach/nand.h

@@ -79,6 +79,10 @@ struct davinci_nand_pdata {		/* platform_data */
 
 	/* e.g. NAND_BUSWIDTH_16 or NAND_USE_FLASH_BBT */
 	unsigned		options;
+
+	/* Main and mirror bbt descriptor overrides */
+	struct nand_bbt_descr	*bbt_td;
+	struct nand_bbt_descr	*bbt_md;
 };
 
 #endif	/* __ARCH_ARM_DAVINCI_NAND_H */

arch/arm/mach-nomadik/board-nhk8815.c

@@ -18,6 +18,7 @@
 #include <linux/gpio.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
+#include <linux/mtd/onenand.h>
 #include <linux/mtd/partitions.h>
 #include <linux/io.h>
 #include <asm/sizes.h>
@@ -149,7 +150,7 @@ static struct mtd_partition nhk8815_onenand_partitions[] = {
 	}
 };
 
-static struct flash_platform_data nhk8815_onenand_data = {
+static struct onenand_platform_data nhk8815_onenand_data = {
 	.parts		= nhk8815_onenand_partitions,
 	.nr_parts	= ARRAY_SIZE(nhk8815_onenand_partitions),
 };
@@ -163,7 +164,7 @@ static struct resource nhk8815_onenand_resource[] = {
 };
 
 static struct platform_device nhk8815_onenand_device = {
-	.name		= "onenand",
+	.name		= "onenand-flash",
 	.id		= -1,
 	.dev		= {
 		.platform_data	= &nhk8815_onenand_data,
@@ -174,10 +175,10 @@ static struct platform_device nhk8815_onenand_device = {
 
 static void __init nhk8815_onenand_init(void)
 {
-#ifdef CONFIG_ONENAND
+#ifdef CONFIG_MTD_ONENAND
        /* Set up SMCS0 for OneNand */
-       writel(0x000030db, FSMC_BCR0);
-       writel(0x02100551, FSMC_BTR0);
+	writel(0x000030db, FSMC_BCR(0));
+	writel(0x02100551, FSMC_BTR(0));
 #endif
 }
 

arch/arm/plat-mxc/include/mach/mxc_nand.h

@@ -22,6 +22,7 @@
 
 struct mxc_nand_platform_data {
 	int width;	/* data bus width in bytes */
-	int hw_ecc;	/* 0 if supress hardware ECC */
+	int hw_ecc:1;	/* 0 if supress hardware ECC */
+	int flash_bbt:1; /* set to 1 to use a flash based bbt */
 };
 #endif /* __ASM_ARCH_NAND_H */

arch/arm/plat-s3c/include/plat/nand.h

@@ -17,6 +17,7 @@
  *			Setting this flag will allow the kernel to
  *			look for it at boot time and also skip the NAND
  *			scan.
+ * @options:		Default value to set into 'struct nand_chip' options.
  * @nr_chips:		Number of chips in this set
  * @nr_partitions:	Number of partitions pointed to by @partitions
  * @name:		Name of set (optional)
@@ -31,6 +32,7 @@ struct s3c2410_nand_set {
 	unsigned int		disable_ecc:1;
 	unsigned int		flash_bbt:1;
 
+	unsigned int		options;
 	int			nr_chips;
 	int			nr_partitions;
 	char			*name;

drivers/mtd/chips/cfi_cmdset_0001.c

@@ -43,15 +43,17 @@
 // debugging, turns off buffer write mode if set to 1
 #define FORCE_WORD_WRITE 0
 
-#define MANUFACTURER_INTEL	0x0089
+/* Intel chips */
 #define I82802AB	0x00ad
 #define I82802AC	0x00ac
 #define PF38F4476	0x881c
-#define MANUFACTURER_ST         0x0020
+/* STMicroelectronics chips */
 #define M50LPW080       0x002F
 #define M50FLW080A	0x0080
 #define M50FLW080B	0x0081
+/* Atmel chips */
 #define AT49BV640D	0x02de
+#define AT49BV640DT	0x02db
 
 static int cfi_intelext_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
 static int cfi_intelext_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
@@ -199,6 +201,16 @@ static void fixup_convert_atmel_pri(struct mtd_info *mtd, void *param)
 	cfi->cfiq->BufWriteTimeoutMax = 0;
 }
 
+static void fixup_at49bv640dx_lock(struct mtd_info *mtd, void *param)
+{
+	struct map_info *map = mtd->priv;
+	struct cfi_private *cfi = map->fldrv_priv;
+	struct cfi_pri_intelext *cfip = cfi->cmdset_priv;
+
+	cfip->FeatureSupport |= (1 << 5);
+	mtd->flags |= MTD_POWERUP_LOCK;
+}
+
 #ifdef CMDSET0001_DISABLE_ERASE_SUSPEND_ON_WRITE
 /* Some Intel Strata Flash prior to FPO revision C has bugs in this area */
 static void fixup_intel_strataflash(struct mtd_info *mtd, void* param)
@@ -283,6 +295,8 @@ static void fixup_unlock_powerup_lock(struct mtd_info *mtd, void *param)
 
 static struct cfi_fixup cfi_fixup_table[] = {
 	{ CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
+	{ CFI_MFR_ATMEL, AT49BV640D, fixup_at49bv640dx_lock, NULL },
+	{ CFI_MFR_ATMEL, AT49BV640DT, fixup_at49bv640dx_lock, NULL },
 #ifdef CMDSET0001_DISABLE_ERASE_SUSPEND_ON_WRITE
 	{ CFI_MFR_ANY, CFI_ID_ANY, fixup_intel_strataflash, NULL },
 #endif
@@ -294,16 +308,16 @@ static struct cfi_fixup cfi_fixup_table[] = {
 #endif
 	{ CFI_MFR_ST, 0x00ba, /* M28W320CT */ fixup_st_m28w320ct, NULL },
 	{ CFI_MFR_ST, 0x00bb, /* M28W320CB */ fixup_st_m28w320cb, NULL },
-	{ MANUFACTURER_INTEL, CFI_ID_ANY, fixup_unlock_powerup_lock, NULL, },
+	{ CFI_MFR_INTEL, CFI_ID_ANY, fixup_unlock_powerup_lock, NULL, },
 	{ 0, 0, NULL, NULL }
 };
 
 static struct cfi_fixup jedec_fixup_table[] = {
-	{ MANUFACTURER_INTEL, I82802AB,   fixup_use_fwh_lock, NULL, },
-	{ MANUFACTURER_INTEL, I82802AC,   fixup_use_fwh_lock, NULL, },
-	{ MANUFACTURER_ST,    M50LPW080,  fixup_use_fwh_lock, NULL, },
-	{ MANUFACTURER_ST,    M50FLW080A, fixup_use_fwh_lock, NULL, },
-	{ MANUFACTURER_ST,    M50FLW080B, fixup_use_fwh_lock, NULL, },
+	{ CFI_MFR_INTEL, I82802AB,   fixup_use_fwh_lock, NULL, },
+	{ CFI_MFR_INTEL, I82802AC,   fixup_use_fwh_lock, NULL, },
+	{ CFI_MFR_ST,    M50LPW080,  fixup_use_fwh_lock, NULL, },
+	{ CFI_MFR_ST,    M50FLW080A, fixup_use_fwh_lock, NULL, },
+	{ CFI_MFR_ST,    M50FLW080B, fixup_use_fwh_lock, NULL, },
 	{ 0, 0, NULL, NULL }
 };
 static struct cfi_fixup fixup_table[] = {
@@ -319,7 +333,7 @@ static struct cfi_fixup fixup_table[] = {
 static void cfi_fixup_major_minor(struct cfi_private *cfi,
 						struct cfi_pri_intelext *extp)
 {
-	if (cfi->mfr == MANUFACTURER_INTEL &&
+	if (cfi->mfr == CFI_MFR_INTEL &&
 			cfi->id == PF38F4476 && extp->MinorVersion == '3')
 		extp->MinorVersion = '1';
 }
@@ -2235,7 +2249,7 @@ static int cfi_intelext_otp_walk(struct mtd_info *mtd, loff_t from, size_t len,
 
 	/* Some chips have OTP located in the _top_ partition only.
 	   For example: Intel 28F256L18T (T means top-parameter device) */
-	if (cfi->mfr == MANUFACTURER_INTEL) {
+	if (cfi->mfr == CFI_MFR_INTEL) {
 		switch (cfi->id) {
 		case 0x880b:
 		case 0x880c:
@@ -2564,6 +2578,7 @@ static int cfi_intelext_reset(struct mtd_info *mtd)
 		if (!ret) {
 			map_write(map, CMD(0xff), chip->start);
 			chip->state = FL_SHUTDOWN;
+			put_chip(map, chip, chip->start);
 		}
 		spin_unlock(chip->mutex);
 	}

drivers/mtd/chips/cfi_cmdset_0002.c

@@ -490,10 +490,6 @@ static struct mtd_info *cfi_amdstd_setup(struct mtd_info *mtd)
 	}
 #endif
 
-	/* FIXME: erase-suspend-program is broken.  See
-	   http://lists.infradead.org/pipermail/linux-mtd/2003-December/009001.html */
-	printk(KERN_NOTICE "cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.\n");
-
 	__module_get(THIS_MODULE);
 	return mtd;
 
@@ -573,7 +569,6 @@ static int get_chip(struct map_info *map, struct flchip *chip, unsigned long adr
 
 			if (time_after(jiffies, timeo)) {
 				printk(KERN_ERR "Waiting for chip to be ready timed out.\n");
-				spin_unlock(chip->mutex);
 				return -EIO;
 			}
 			spin_unlock(chip->mutex);
@@ -589,15 +584,9 @@ static int get_chip(struct map_info *map, struct flchip *chip, unsigned long adr
 		return 0;
 
 	case FL_ERASING:
-		if (mode == FL_WRITING) /* FIXME: Erase-suspend-program appears broken. */
-			goto sleep;
-
-		if (!(   mode == FL_READY
-		      || mode == FL_POINT
-		      || !cfip
-		      || (mode == FL_WRITING && (cfip->EraseSuspend & 0x2))
-		      || (mode == FL_WRITING && (cfip->EraseSuspend & 0x1)
-		    )))
+		if (!cfip || !(cfip->EraseSuspend & (0x1|0x2)) ||
+		    !(mode == FL_READY || mode == FL_POINT ||
+		    (mode == FL_WRITING && (cfip->EraseSuspend & 0x2))))
 			goto sleep;
 
 		/* We could check to see if we're trying to access the sector

drivers/mtd/chips/cfi_util.c

@@ -69,6 +69,13 @@ int __xipram cfi_qry_mode_on(uint32_t base, struct map_info *map,
 	/* ST M29DW chips */
 	cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
 	cfi_send_gen_cmd(0x98, 0x555, base, map, cfi, cfi->device_type, NULL);
+	if (cfi_qry_present(map, base, cfi))
+		return 1;
+	/* some old SST chips, e.g. 39VF160x/39VF320x */
+	cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
+	cfi_send_gen_cmd(0xAA, 0x5555, base, map, cfi, cfi->device_type, NULL);
+	cfi_send_gen_cmd(0x55, 0x2AAA, base, map, cfi, cfi->device_type, NULL);
+	cfi_send_gen_cmd(0x98, 0x5555, base, map, cfi, cfi->device_type, NULL);
 	if (cfi_qry_present(map, base, cfi))
 		return 1;
 	/* QRY not found */

drivers/mtd/chips/jedec_probe.c

@@ -142,8 +142,8 @@
 
 /* ST - www.st.com */
 #define M29F800AB	0x0058
-#define M29W800DT	0x00D7
-#define M29W800DB	0x005B
+#define M29W800DT	0x22D7
+#define M29W800DB	0x225B
 #define M29W400DT	0x00EE
 #define M29W400DB	0x00EF
 #define M29W160DT	0x22C4
@@ -1575,7 +1575,7 @@ static const struct amd_flash_info jedec_table[] = {
 		.dev_id		= M29W800DT,
 		.name		= "ST M29W800DT",
 		.devtypes	= CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8,
-		.uaddr		= MTD_UADDR_0x5555_0x2AAA,	/* ???? */
+		.uaddr		= MTD_UADDR_0x0AAA_0x0555,
 		.dev_size	= SIZE_1MiB,
 		.cmd_set	= P_ID_AMD_STD,
 		.nr_regions	= 4,
@@ -1590,7 +1590,7 @@ static const struct amd_flash_info jedec_table[] = {
 		.dev_id		= M29W800DB,
 		.name		= "ST M29W800DB",
 		.devtypes	= CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8,
-		.uaddr		= MTD_UADDR_0x5555_0x2AAA,	/* ???? */
+		.uaddr		= MTD_UADDR_0x0AAA_0x0555,
 		.dev_size	= SIZE_1MiB,
 		.cmd_set	= P_ID_AMD_STD,
 		.nr_regions	= 4,

drivers/mtd/devices/mtd_dataflash.c

@@ -636,6 +636,7 @@ add_dataflash_otp(struct spi_device *spi, char *name,
 	struct mtd_info			*device;
 	struct flash_platform_data	*pdata = spi->dev.platform_data;
 	char				*otp_tag = "";
+	int				err = 0;
 
 	priv = kzalloc(sizeof *priv, GFP_KERNEL);
 	if (!priv)
@@ -693,13 +694,23 @@ add_dataflash_otp(struct spi_device *spi, char *name,
 
 		if (nr_parts > 0) {
 			priv->partitioned = 1;
-			return add_mtd_partitions(device, parts, nr_parts);
+			err = add_mtd_partitions(device, parts, nr_parts);
+			goto out;
 		}
 	} else if (pdata && pdata->nr_parts)
 		dev_warn(&spi->dev, "ignoring %d default partitions on %s\n",
 				pdata->nr_parts, device->name);
 
-	return add_mtd_device(device) == 1 ? -ENODEV : 0;
+	if (add_mtd_device(device) == 1)
+		err = -ENODEV;
+
+out:
+	if (!err)
+		return 0;
+
+	dev_set_drvdata(&spi->dev, NULL);
+	kfree(priv);
+	return err;
 }
 
 static inline int __devinit
@@ -932,8 +943,10 @@ static int __devexit dataflash_remove(struct spi_device *spi)
 		status = del_mtd_partitions(&flash->mtd);
 	else
 		status = del_mtd_device(&flash->mtd);
-	if (status == 0)
+	if (status == 0) {
+		dev_set_drvdata(&spi->dev, NULL);
 		kfree(flash);
+	}
 	return status;
 }
 

drivers/mtd/maps/Kconfig

@@ -359,12 +359,6 @@ config MTD_SA1100
 	  the SA1100 and SA1110, including the Assabet and the Compaq iPAQ.
 	  If you have such a board, say 'Y'.
 
-config MTD_IPAQ
-	tristate "CFI Flash device mapped on Compaq/HP iPAQ"
-	depends on IPAQ_HANDHELD && MTD_CFI
-	help
-	  This provides a driver for the on-board flash of the iPAQ.
-
 config MTD_DC21285
 	tristate "CFI Flash device mapped on DC21285 Footbridge"
 	depends on MTD_CFI && ARCH_FOOTBRIDGE && MTD_COMPLEX_MAPPINGS

drivers/mtd/maps/Makefile

@@ -24,12 +24,12 @@ obj-$(CONFIG_MTD_CEIVA)		+= ceiva.o
 obj-$(CONFIG_MTD_OCTAGON)	+= octagon-5066.o
 obj-$(CONFIG_MTD_PHYSMAP)	+= physmap.o
 obj-$(CONFIG_MTD_PHYSMAP_OF)	+= physmap_of.o
+obj-$(CONFIG_MTD_PISMO)		+= pismo.o
 obj-$(CONFIG_MTD_PMC_MSP_EVM)   += pmcmsp-flash.o
 obj-$(CONFIG_MTD_PCMCIA)	+= pcmciamtd.o
 obj-$(CONFIG_MTD_RPXLITE)	+= rpxlite.o
 obj-$(CONFIG_MTD_TQM8XXL)	+= tqm8xxl.o
 obj-$(CONFIG_MTD_SA1100)	+= sa1100-flash.o
-obj-$(CONFIG_MTD_IPAQ)		+= ipaq-flash.o
 obj-$(CONFIG_MTD_SBC_GXX)	+= sbc_gxx.o
 obj-$(CONFIG_MTD_SC520CDP)	+= sc520cdp.o
 obj-$(CONFIG_MTD_NETSC520)	+= netsc520.o

drivers/mtd/maps/ixp4xx.c

@@ -210,7 +210,7 @@ static int ixp4xx_flash_probe(struct platform_device *dev)
 	 * not attempt to do a direct access on us.
 	 */
 	info->map.phys = NO_XIP;
-	info->map.size = dev->resource->end - dev->resource->start + 1;
+	info->map.size = resource_size(dev->resource);
 
 	/*
 	 * We only support 16-bit accesses for now. If and when
@@ -224,7 +224,7 @@ static int ixp4xx_flash_probe(struct platform_device *dev)
 	info->map.copy_from = ixp4xx_copy_from,
 
 	info->res = request_mem_region(dev->resource->start,
-			dev->resource->end - dev->resource->start + 1,
+			resource_size(dev->resource),
 			"IXP4XXFlash");
 	if (!info->res) {
 		printk(KERN_ERR "IXP4XXFlash: Could not reserve memory region\n");
@@ -233,7 +233,7 @@ static int ixp4xx_flash_probe(struct platform_device *dev)
 	}
 
 	info->map.virt = ioremap(dev->resource->start,
-				 dev->resource->end - dev->resource->start + 1);
+				 resource_size(dev->resource));
 	if (!info->map.virt) {
 		printk(KERN_ERR "IXP4XXFlash: Failed to ioremap region\n");
 		err = -EIO;

drivers/mtd/maps/physmap.c

@@ -48,23 +48,22 @@ static int physmap_flash_remove(struct platform_device *dev)
 
 	if (info->cmtd) {
 #ifdef CONFIG_MTD_PARTITIONS
-		if (info->nr_parts || physmap_data->nr_parts)
+		if (info->nr_parts || physmap_data->nr_parts) {
 			del_mtd_partitions(info->cmtd);
-		else
+
+			if (info->nr_parts)
+				kfree(info->parts);
+		} else {
 			del_mtd_device(info->cmtd);
+		}
 #else
 		del_mtd_device(info->cmtd);
 #endif
-	}
-#ifdef CONFIG_MTD_PARTITIONS
-	if (info->nr_parts)
-		kfree(info->parts);
-#endif
-
 #ifdef CONFIG_MTD_CONCAT
-	if (info->cmtd != info->mtd[0])
-		mtd_concat_destroy(info->cmtd);
+		if (info->cmtd != info->mtd[0])
+			mtd_concat_destroy(info->cmtd);
 #endif
+	}
 
 	for (i = 0; i < MAX_RESOURCES; i++) {
 		if (info->mtd[i] != NULL)
@@ -130,7 +129,7 @@ static int physmap_flash_probe(struct platform_device *dev)
 						 info->map[i].size);
 		if (info->map[i].virt == NULL) {
 			dev_err(&dev->dev, "Failed to ioremap flash region\n");
-			err = EIO;
+			err = -EIO;
 			goto err_out;
 		}
 

drivers/mtd/maps/sa1100-flash.c

@@ -248,7 +248,7 @@ static void sa1100_destroy(struct sa_info *info, struct flash_platform_data *pla
 		plat->exit();
 }
 
-static struct sa_info *__init
+static struct sa_info *__devinit
 sa1100_setup_mtd(struct platform_device *pdev, struct flash_platform_data *plat)
 {
 	struct sa_info *info;

drivers/mtd/maps/vmu-flash.c

@@ -612,16 +612,15 @@ static int __devinit vmu_connect(struct maple_device *mdev)
 
 	test_flash_data = be32_to_cpu(mdev->devinfo.function);
 	/* Need to count how many bits are set - to find out which
-	 * function_data element has details of the memory card:
-	 * using Brian Kernighan's/Peter Wegner's method */
-	for (c = 0; test_flash_data; c++)
-		test_flash_data &= test_flash_data - 1;
+	 * function_data element has details of the memory card
+	 */
+	c = hweight_long(test_flash_data);
 
 	basic_flash_data = be32_to_cpu(mdev->devinfo.function_data[c - 1]);
 
 	card = kmalloc(sizeof(struct memcard), GFP_KERNEL);
 	if (!card) {
-		error = ENOMEM;
+		error = -ENOMEM;
 		goto fail_nomem;
 	}
 

drivers/mtd/mtd_blkdevs.c

@@ -84,9 +84,6 @@ static int mtd_blktrans_thread(void *arg)
 	struct request_queue *rq = tr->blkcore_priv->rq;
 	struct request *req = NULL;
 
-	/* we might get involved when memory gets low, so use PF_MEMALLOC */
-	current->flags |= PF_MEMALLOC;
-
 	spin_lock_irq(rq->queue_lock);
 
 	while (!kthread_should_stop()) {
@@ -381,7 +378,7 @@ int register_mtd_blktrans(struct mtd_blktrans_ops *tr)
 	tr->blkcore_priv->thread = kthread_run(mtd_blktrans_thread, tr,
 			"%sd", tr->name);
 	if (IS_ERR(tr->blkcore_priv->thread)) {
-		int ret = PTR_ERR(tr->blkcore_priv->thread);
+		ret = PTR_ERR(tr->blkcore_priv->thread);
 		blk_cleanup_queue(tr->blkcore_priv->rq);
 		unregister_blkdev(tr->major, tr->name);
 		kfree(tr->blkcore_priv);

drivers/mtd/mtdcore.c

@@ -447,7 +447,7 @@ struct mtd_info *get_mtd_device(struct mtd_info *mtd, int num)
 		for (i=0; i< MAX_MTD_DEVICES; i++)
 			if (mtd_table[i] == mtd)
 				ret = mtd_table[i];
-	} else if (num < MAX_MTD_DEVICES) {
+	} else if (num >= 0 && num < MAX_MTD_DEVICES) {
 		ret = mtd_table[num];
 		if (mtd && mtd != ret)
 			ret = NULL;

drivers/mtd/nand/Kconfig

@@ -201,6 +201,22 @@ config MTD_NAND_S3C2410_CLKSTOP
 	  when the is NAND chip selected or released, but will save
 	  approximately 5mA of power when there is nothing happening.
 
+config MTD_NAND_BCM_UMI
+	tristate "NAND Flash support for BCM Reference Boards"
+	depends on ARCH_BCMRING && MTD_NAND
+	help
+	  This enables the NAND flash controller on the BCM UMI block.
+
+	  No board specfic support is done by this driver, each board
+	  must advertise a platform_device for the driver to attach.
+
+config MTD_NAND_BCM_UMI_HWCS
+	bool "BCM UMI NAND Hardware CS"
+	depends on MTD_NAND_BCM_UMI
+	help
+	  Enable the use of the BCM UMI block's internal CS using NAND.
+	  This should only be used if you know the external NAND CS can toggle.
+
 config MTD_NAND_DISKONCHIP
 	tristate "DiskOnChip 2000, Millennium and Millennium Plus (NAND reimplementation) (EXPERIMENTAL)"
 	depends on EXPERIMENTAL

drivers/mtd/nand/Makefile

@@ -42,5 +42,6 @@ obj-$(CONFIG_MTD_NAND_SOCRATES)		+= socrates_nand.o
 obj-$(CONFIG_MTD_NAND_TXX9NDFMC)	+= txx9ndfmc.o
 obj-$(CONFIG_MTD_NAND_W90P910)		+= w90p910_nand.o
 obj-$(CONFIG_MTD_NAND_NOMADIK)		+= nomadik_nand.o
+obj-$(CONFIG_MTD_NAND_BCM_UMI)		+= bcm_umi_nand.o nand_bcm_umi.o
 
 nand-objs := nand_base.o nand_bbt.o

drivers/mtd/nand/alauda.c

@@ -372,15 +372,6 @@ static int alauda_read_oob(struct mtd_info *mtd, loff_t from, void *oob)
 	return __alauda_read_page(mtd, from, ignore_buf, oob);
 }
 
-static int popcount8(u8 c)
-{
-	int ret = 0;
-
-	for ( ; c; c>>=1)
-		ret += c & 1;
-	return ret;
-}
-
 static int alauda_isbad(struct mtd_info *mtd, loff_t ofs)
 {
 	u8 oob[16];
@@ -391,7 +382,7 @@ static int alauda_isbad(struct mtd_info *mtd, loff_t ofs)
 		return err;
 
 	/* A block is marked bad if two or more bits are zero */
-	return popcount8(oob[5]) >= 7 ? 0 : 1;
+	return hweight8(oob[5]) >= 7 ? 0 : 1;
 }
 
 static int alauda_bounce_read(struct mtd_info *mtd, loff_t from, size_t len,

drivers/mtd/nand/atmel_nand.c

@@ -192,7 +192,6 @@ static int atmel_nand_calculate(struct mtd_info *mtd,
 {
 	struct nand_chip *nand_chip = mtd->priv;
 	struct atmel_nand_host *host = nand_chip->priv;
-	uint32_t *eccpos = nand_chip->ecc.layout->eccpos;
 	unsigned int ecc_value;
 
 	/* get the first 2 ECC bytes */
@@ -464,7 +463,7 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
 	if (host->board->det_pin) {
 		if (gpio_get_value(host->board->det_pin)) {
 			printk(KERN_INFO "No SmartMedia card inserted.\n");
-			res = ENXIO;
+			res = -ENXIO;
 			goto err_no_card;
 		}
 	}
@@ -535,7 +534,7 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
 
 	if ((!partitions) || (num_partitions == 0)) {
 		printk(KERN_ERR "atmel_nand: No partitions defined, or unsupported device.\n");
-		res = ENXIO;
+		res = -ENXIO;
 		goto err_no_partitions;
 	}
 

drivers/mtd/nand/bcm_umi_bch.c

+/*****************************************************************************
+* Copyright 2004 - 2009 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+#include "nand_bcm_umi.h"
+
+/* ---- External Variable Declarations ----------------------------------- */
+/* ---- External Function Prototypes ------------------------------------- */
+/* ---- Public Variables ------------------------------------------------- */
+/* ---- Private Constants and Types -------------------------------------- */
+
+/* ---- Private Function Prototypes -------------------------------------- */
+static int bcm_umi_bch_read_page_hwecc(struct mtd_info *mtd,
+	struct nand_chip *chip, uint8_t *buf, int page);
+static void bcm_umi_bch_write_page_hwecc(struct mtd_info *mtd,
+	struct nand_chip *chip, const uint8_t *buf);
+
+/* ---- Private Variables ------------------------------------------------ */
+
+/*
+** nand_hw_eccoob
+** New oob placement block for use with hardware ecc generation.
+*/
+static struct nand_ecclayout nand_hw_eccoob_512 = {
+	/* Reserve 5 for BI indicator */
+	.oobfree = {
+#if (NAND_ECC_NUM_BYTES > 3)
+		    {.offset = 0, .length = 2}
+#else
+		    {.offset = 0, .length = 5},
+		    {.offset = 6, .length = 7}
+#endif
+		    }
+};
+
+/*
+** We treat the OOB for a 2K page as if it were 4 512 byte oobs,
+** except the BI is at byte 0.
+*/
+static struct nand_ecclayout nand_hw_eccoob_2048 = {
+	/* Reserve 0 as BI indicator */
+	.oobfree = {
+#if (NAND_ECC_NUM_BYTES > 10)
+		    {.offset = 1, .length = 2},
+#elif (NAND_ECC_NUM_BYTES > 7)
+		    {.offset = 1, .length = 5},
+		    {.offset = 16, .length = 6},
+		    {.offset = 32, .length = 6},
+		    {.offset = 48, .length = 6}
+#else
+		    {.offset = 1, .length = 8},
+		    {.offset = 16, .length = 9},
+		    {.offset = 32, .length = 9},
+		    {.offset = 48, .length = 9}
+#endif
+		    }
+};
+
+/* We treat the OOB for a 4K page as if it were 8 512 byte oobs,
+ * except the BI is at byte 0. */
+static struct nand_ecclayout nand_hw_eccoob_4096 = {
+	/* Reserve 0 as BI indicator */
+	.oobfree = {
+#if (NAND_ECC_NUM_BYTES > 10)
+		    {.offset = 1, .length = 2},
+		    {.offset = 16, .length = 3},
+		    {.offset = 32, .length = 3},
+		    {.offset = 48, .length = 3},
+		    {.offset = 64, .length = 3},
+		    {.offset = 80, .length = 3},
+		    {.offset = 96, .length = 3},
+		    {.offset = 112, .length = 3}
+#else
+		    {.offset = 1, .length = 5},
+		    {.offset = 16, .length = 6},
+		    {.offset = 32, .length = 6},
+		    {.offset = 48, .length = 6},
+		    {.offset = 64, .length = 6},
+		    {.offset = 80, .length = 6},
+		    {.offset = 96, .length = 6},
+		    {.offset = 112, .length = 6}
+#endif
+		    }
+};
+
+/* ---- Private Functions ------------------------------------------------ */
+/* ==== Public Functions ================================================= */
+
+/****************************************************************************
+*
+*  bcm_umi_bch_read_page_hwecc - hardware ecc based page read function
+*  @mtd:	mtd info structure
+*  @chip:	nand chip info structure
+*  @buf:	buffer to store read data
+*
+***************************************************************************/
+static int bcm_umi_bch_read_page_hwecc(struct mtd_info *mtd,
+				       struct nand_chip *chip, uint8_t * buf,
+						 int page)
+{
+	int sectorIdx = 0;
+	int eccsize = chip->ecc.size;
+	int eccsteps = chip->ecc.steps;
+	uint8_t *datap = buf;
+	uint8_t eccCalc[NAND_ECC_NUM_BYTES];
+	int sectorOobSize = mtd->oobsize / eccsteps;
+	int stat;
+
+	for (sectorIdx = 0; sectorIdx < eccsteps;
+			sectorIdx++, datap += eccsize) {
+		if (sectorIdx > 0) {
+			/* Seek to page location within sector */
+			chip->cmdfunc(mtd, NAND_CMD_RNDOUT, sectorIdx * eccsize,
+				      -1);
+		}
+
+		/* Enable hardware ECC before reading the buf */
+		nand_bcm_umi_bch_enable_read_hwecc();
+
+		/* Read in data */
+		bcm_umi_nand_read_buf(mtd, datap, eccsize);
+
+		/* Pause hardware ECC after reading the buf */
+		nand_bcm_umi_bch_pause_read_ecc_calc();
+
+		/* Read the OOB ECC */
+		chip->cmdfunc(mtd, NAND_CMD_RNDOUT,
+			      mtd->writesize + sectorIdx * sectorOobSize, -1);
+		nand_bcm_umi_bch_read_oobEcc(mtd->writesize, eccCalc,
+					     NAND_ECC_NUM_BYTES,
+					     chip->oob_poi +
+					     sectorIdx * sectorOobSize);
+
+		/* Correct any ECC detected errors */
+		stat =
+		    nand_bcm_umi_bch_correct_page(datap, eccCalc,
+						  NAND_ECC_NUM_BYTES);
+
+		/* Update Stats */
+		if (stat < 0) {
+#if defined(NAND_BCM_UMI_DEBUG)
+			printk(KERN_WARNING "%s uncorr_err sectorIdx=%d\n",
+			       __func__, sectorIdx);
+			printk(KERN_WARNING
+			       "%s data %02x %02x %02x %02x "
+					 "%02x %02x %02x %02x\n",
+			       __func__, datap[0], datap[1], datap[2], datap[3],
+			       datap[4], datap[5], datap[6], datap[7]);
+			printk(KERN_WARNING
+			       "%s ecc  %02x %02x %02x %02x "
+					 "%02x %02x %02x %02x %02x %02x "
+					 "%02x %02x %02x\n",
+			       __func__, eccCalc[0], eccCalc[1], eccCalc[2],
+			       eccCalc[3], eccCalc[4], eccCalc[5], eccCalc[6],
+			       eccCalc[7], eccCalc[8], eccCalc[9], eccCalc[10],
+			       eccCalc[11], eccCalc[12]);
+			BUG();
+#endif
+			mtd->ecc_stats.failed++;
+		} else {
+#if defined(NAND_BCM_UMI_DEBUG)
+			if (stat > 0) {
+				printk(KERN_INFO
+				       "%s %d correctable_errors detected\n",
+				       __func__, stat);
+			}
+#endif
+			mtd->ecc_stats.corrected += stat;
+		}
+	}
+	return 0;
+}
+
+/****************************************************************************
+*
+*  bcm_umi_bch_write_page_hwecc - hardware ecc based page write function
+*  @mtd:	mtd info structure
+*  @chip:	nand chip info structure
+*  @buf:	data buffer
+*
+***************************************************************************/
+static void bcm_umi_bch_write_page_hwecc(struct mtd_info *mtd,
+	struct nand_chip *chip, const uint8_t *buf)
+{
+	int sectorIdx = 0;
+	int eccsize = chip->ecc.size;
+	int eccsteps = chip->ecc.steps;
+	const uint8_t *datap = buf;
+	uint8_t *oobp = chip->oob_poi;
+	int sectorOobSize = mtd->oobsize / eccsteps;
+
+	for (sectorIdx = 0; sectorIdx < eccsteps;
+	     sectorIdx++, datap += eccsize, oobp += sectorOobSize) {
+		/* Enable hardware ECC before writing the buf */
+		nand_bcm_umi_bch_enable_write_hwecc();
+		bcm_umi_nand_write_buf(mtd, datap, eccsize);
+		nand_bcm_umi_bch_write_oobEcc(mtd->writesize, oobp,
+					      NAND_ECC_NUM_BYTES);
+	}
+
+	bcm_umi_nand_write_buf(mtd, chip->oob_poi, mtd->oobsize);
+}

drivers/mtd/nand/davinci_nand.c

@@ -591,6 +591,8 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
 
 	/* options such as NAND_USE_FLASH_BBT or 16-bit widths */
 	info->chip.options	= pdata->options;
+	info->chip.bbt_td	= pdata->bbt_td;
+	info->chip.bbt_md	= pdata->bbt_md;
 
 	info->ioaddr		= (uint32_t __force) vaddr;
 
@@ -599,7 +601,7 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
 	info->mask_chipsel	= pdata->mask_chipsel;
 
 	/* use nandboot-capable ALE/CLE masks by default */
-	info->mask_ale		= pdata->mask_cle ? : MASK_ALE;
+	info->mask_ale		= pdata->mask_ale ? : MASK_ALE;
 	info->mask_cle		= pdata->mask_cle ? : MASK_CLE;
 
 	/* Set address of hardware control function */

drivers/mtd/nand/excite_nandflash.c

@@ -128,7 +128,7 @@ static int excite_nand_devready(struct mtd_info *mtd)
  * The binding to the mtd and all allocated
  * resources are released.
  */
-static int __exit excite_nand_remove(struct platform_device *dev)
+static int __devexit excite_nand_remove(struct platform_device *dev)
 {
 	struct excite_nand_drvdata * const this = platform_get_drvdata(dev);
 

drivers/mtd/nand/fsl_elbc_nand.c

@@ -237,12 +237,15 @@ static int fsl_elbc_run_command(struct mtd_info *mtd)
 
 	ctrl->use_mdr = 0;
 
-	dev_vdbg(ctrl->dev,
-	         "fsl_elbc_run_command: stat=%08x mdr=%08x fmr=%08x\n",
-	         ctrl->status, ctrl->mdr, in_be32(&lbc->fmr));
+	if (ctrl->status != LTESR_CC) {
+		dev_info(ctrl->dev,
+		         "command failed: fir %x fcr %x status %x mdr %x\n",
+		         in_be32(&lbc->fir), in_be32(&lbc->fcr),
+		         ctrl->status, ctrl->mdr);
+		return -EIO;
+	}
 
-	/* returns 0 on success otherwise non-zero) */
-	return ctrl->status == LTESR_CC ? 0 : -EIO;
+	return 0;
 }
 
 static void fsl_elbc_do_read(struct nand_chip *chip, int oob)
@@ -253,17 +256,17 @@ static void fsl_elbc_do_read(struct nand_chip *chip, int oob)
 
 	if (priv->page_size) {
 		out_be32(&lbc->fir,
-		         (FIR_OP_CW0 << FIR_OP0_SHIFT) |
+		         (FIR_OP_CM0 << FIR_OP0_SHIFT) |
 		         (FIR_OP_CA  << FIR_OP1_SHIFT) |
 		         (FIR_OP_PA  << FIR_OP2_SHIFT) |
-		         (FIR_OP_CW1 << FIR_OP3_SHIFT) |
+		         (FIR_OP_CM1 << FIR_OP3_SHIFT) |
 		         (FIR_OP_RBW << FIR_OP4_SHIFT));
 
 		out_be32(&lbc->fcr, (NAND_CMD_READ0 << FCR_CMD0_SHIFT) |
 		                    (NAND_CMD_READSTART << FCR_CMD1_SHIFT));
 	} else {
 		out_be32(&lbc->fir,
-		         (FIR_OP_CW0 << FIR_OP0_SHIFT) |
+		         (FIR_OP_CM0 << FIR_OP0_SHIFT) |
 		         (FIR_OP_CA  << FIR_OP1_SHIFT) |
 		         (FIR_OP_PA  << FIR_OP2_SHIFT) |
 		         (FIR_OP_RBW << FIR_OP3_SHIFT));
@@ -332,7 +335,7 @@ static void fsl_elbc_cmdfunc(struct mtd_info *mtd, unsigned int command,
 	case NAND_CMD_READID:
 		dev_vdbg(ctrl->dev, "fsl_elbc_cmdfunc: NAND_CMD_READID.\n");
 
-		out_be32(&lbc->fir, (FIR_OP_CW0 << FIR_OP0_SHIFT) |
+		out_be32(&lbc->fir, (FIR_OP_CM0 << FIR_OP0_SHIFT) |
 		                    (FIR_OP_UA  << FIR_OP1_SHIFT) |
 		                    (FIR_OP_RBW << FIR_OP2_SHIFT));
 		out_be32(&lbc->fcr, NAND_CMD_READID << FCR_CMD0_SHIFT);
@@ -359,16 +362,20 @@ static void fsl_elbc_cmdfunc(struct mtd_info *mtd, unsigned int command,
 		dev_vdbg(ctrl->dev, "fsl_elbc_cmdfunc: NAND_CMD_ERASE2.\n");
 
 		out_be32(&lbc->fir,
-		         (FIR_OP_CW0 << FIR_OP0_SHIFT) |
+		         (FIR_OP_CM0 << FIR_OP0_SHIFT) |
 		         (FIR_OP_PA  << FIR_OP1_SHIFT) |
-		         (FIR_OP_CM1 << FIR_OP2_SHIFT));
+		         (FIR_OP_CM2 << FIR_OP2_SHIFT) |
+		         (FIR_OP_CW1 << FIR_OP3_SHIFT) |
+		         (FIR_OP_RS  << FIR_OP4_SHIFT));
 
 		out_be32(&lbc->fcr,
 		         (NAND_CMD_ERASE1 << FCR_CMD0_SHIFT) |
-		         (NAND_CMD_ERASE2 << FCR_CMD1_SHIFT));
+		         (NAND_CMD_STATUS << FCR_CMD1_SHIFT) |
+		         (NAND_CMD_ERASE2 << FCR_CMD2_SHIFT));
 
 		out_be32(&lbc->fbcr, 0);
 		ctrl->read_bytes = 0;
+		ctrl->use_mdr = 1;
 
 		fsl_elbc_run_command(mtd);
 		return;
@@ -383,40 +390,41 @@ static void fsl_elbc_cmdfunc(struct mtd_info *mtd, unsigned int command,
 
 		ctrl->column = column;
 		ctrl->oob = 0;
+		ctrl->use_mdr = 1;
 
-		if (priv->page_size) {
-			fcr = (NAND_CMD_SEQIN << FCR_CMD0_SHIFT) |
-			      (NAND_CMD_PAGEPROG << FCR_CMD1_SHIFT);
+		fcr = (NAND_CMD_STATUS   << FCR_CMD1_SHIFT) |
+		      (NAND_CMD_SEQIN    << FCR_CMD2_SHIFT) |
+		      (NAND_CMD_PAGEPROG << FCR_CMD3_SHIFT);
 
+		if (priv->page_size) {
 			out_be32(&lbc->fir,
-			         (FIR_OP_CW0 << FIR_OP0_SHIFT) |
+			         (FIR_OP_CM2 << FIR_OP0_SHIFT) |
 			         (FIR_OP_CA  << FIR_OP1_SHIFT) |
 			         (FIR_OP_PA  << FIR_OP2_SHIFT) |
 			         (FIR_OP_WB  << FIR_OP3_SHIFT) |
-			         (FIR_OP_CW1 << FIR_OP4_SHIFT));
+			         (FIR_OP_CM3 << FIR_OP4_SHIFT) |
+			         (FIR_OP_CW1 << FIR_OP5_SHIFT) |
+			         (FIR_OP_RS  << FIR_OP6_SHIFT));
 		} else {
-			fcr = (NAND_CMD_PAGEPROG << FCR_CMD1_SHIFT) |
-			      (NAND_CMD_SEQIN << FCR_CMD2_SHIFT);
-
 			out_be32(&lbc->fir,
-			         (FIR_OP_CW0 << FIR_OP0_SHIFT) |
+			         (FIR_OP_CM0 << FIR_OP0_SHIFT) |
 			         (FIR_OP_CM2 << FIR_OP1_SHIFT) |
 			         (FIR_OP_CA  << FIR_OP2_SHIFT) |
 			         (FIR_OP_PA  << FIR_OP3_SHIFT) |
 			         (FIR_OP_WB  << FIR_OP4_SHIFT) |
-			         (FIR_OP_CW1 << FIR_OP5_SHIFT));
+			         (FIR_OP_CM3 << FIR_OP5_SHIFT) |
+			         (FIR_OP_CW1 << FIR_OP6_SHIFT) |
+			         (FIR_OP_RS  << FIR_OP7_SHIFT));
 
 			if (column >= mtd->writesize) {
 				/* OOB area --> READOOB */
 				column -= mtd->writesize;
 				fcr |= NAND_CMD_READOOB << FCR_CMD0_SHIFT;
 				ctrl->oob = 1;
-			} else if (column < 256) {
+			} else {
+				WARN_ON(column != 0);
 				/* First 256 bytes --> READ0 */
 				fcr |= NAND_CMD_READ0 << FCR_CMD0_SHIFT;
-			} else {
-				/* Second 256 bytes --> READ1 */
-				fcr |= NAND_CMD_READ1 << FCR_CMD0_SHIFT;
 			}
 		}
 
@@ -628,22 +636,6 @@ static int fsl_elbc_wait(struct mtd_info *mtd, struct nand_chip *chip)
 {
 	struct fsl_elbc_mtd *priv = chip->priv;
 	struct fsl_elbc_ctrl *ctrl = priv->ctrl;
-	struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
-
-	if (ctrl->status != LTESR_CC)
-		return NAND_STATUS_FAIL;
-
-	/* Use READ_STATUS command, but wait for the device to be ready */
-	ctrl->use_mdr = 0;
-	out_be32(&lbc->fir,
-	         (FIR_OP_CW0 << FIR_OP0_SHIFT) |
-	         (FIR_OP_RBW << FIR_OP1_SHIFT));
-	out_be32(&lbc->fcr, NAND_CMD_STATUS << FCR_CMD0_SHIFT);
-	out_be32(&lbc->fbcr, 1);
-	set_addr(mtd, 0, 0, 0);
-	ctrl->read_bytes = 1;
-
-	fsl_elbc_run_command(mtd);
 
 	if (ctrl->status != LTESR_CC)
 		return NAND_STATUS_FAIL;
@@ -651,8 +643,7 @@ static int fsl_elbc_wait(struct mtd_info *mtd, struct nand_chip *chip)
 	/* The chip always seems to report that it is
 	 * write-protected, even when it is not.
 	 */
-	setbits8(ctrl->addr, NAND_STATUS_WP);
-	return fsl_elbc_read_byte(mtd);
+	return (ctrl->mdr & 0xff) | NAND_STATUS_WP;
 }
 
 static int fsl_elbc_chip_init_tail(struct mtd_info *mtd)
@@ -946,6 +937,13 @@ static int __devinit fsl_elbc_ctrl_init(struct fsl_elbc_ctrl *ctrl)
 {
 	struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
 
+	/*
+	 * NAND transactions can tie up the bus for a long time, so set the
+	 * bus timeout to max by clearing LBCR[BMT] (highest base counter
+	 * value) and setting LBCR[BMTPS] to the highest prescaler value.
+	 */
+	clrsetbits_be32(&lbc->lbcr, LBCR_BMT, 15);
+
 	/* clear event registers */
 	setbits32(&lbc->ltesr, LTESR_NAND_MASK);
 	out_be32(&lbc->lteatr, 0);

drivers/mtd/nand/fsl_upm.c

@@ -112,7 +112,7 @@ static void fun_select_chip(struct mtd_info *mtd, int mchip_nr)
 
 	if (mchip_nr == -1) {
 		chip->cmd_ctrl(mtd, NAND_CMD_NONE, 0 | NAND_CTRL_CHANGE);
-	} else if (mchip_nr >= 0) {
+	} else if (mchip_nr >= 0 && mchip_nr < NAND_MAX_CHIPS) {
 		fun->mchip_number = mchip_nr;
 		chip->IO_ADDR_R = fun->io_base + fun->mchip_offsets[mchip_nr];
 		chip->IO_ADDR_W = chip->IO_ADDR_R;

drivers/mtd/nand/nand_base.c

@@ -428,6 +428,28 @@ static int nand_block_checkbad(struct mtd_info *mtd, loff_t ofs, int getchip,
 	return nand_isbad_bbt(mtd, ofs, allowbbt);
 }
 
+/**
+ * panic_nand_wait_ready - [GENERIC] Wait for the ready pin after commands.
+ * @mtd:	MTD device structure
+ * @timeo:	Timeout
+ *
+ * Helper function for nand_wait_ready used when needing to wait in interrupt
+ * context.
+ */
+static void panic_nand_wait_ready(struct mtd_info *mtd, unsigned long timeo)
+{
+	struct nand_chip *chip = mtd->priv;
+	int i;
+
+	/* Wait for the device to get ready */
+	for (i = 0; i < timeo; i++) {
+		if (chip->dev_ready(mtd))
+			break;
+		touch_softlockup_watchdog();
+		mdelay(1);
+	}
+}
+
 /*
  * Wait for the ready pin, after a command
  * The timeout is catched later.
@@ -437,6 +459,10 @@ void nand_wait_ready(struct mtd_info *mtd)
 	struct nand_chip *chip = mtd->priv;
 	unsigned long timeo = jiffies + 2;
 
+	/* 400ms timeout */
+	if (in_interrupt() || oops_in_progress)
+		return panic_nand_wait_ready(mtd, 400);
+
 	led_trigger_event(nand_led_trigger, LED_FULL);
 	/* wait until command is processed or timeout occures */
 	do {
@@ -671,6 +697,22 @@ static void nand_command_lp(struct mtd_info *mtd, unsigned int command,
 	nand_wait_ready(mtd);
 }
 
+/**
+ * panic_nand_get_device - [GENERIC] Get chip for selected access
+ * @chip:	the nand chip descriptor
+ * @mtd:	MTD device structure
+ * @new_state:	the state which is requested
+ *
+ * Used when in panic, no locks are taken.
+ */
+static void panic_nand_get_device(struct nand_chip *chip,
+		      struct mtd_info *mtd, int new_state)
+{
+	/* Hardware controller shared among independend devices */
+	chip->controller->active = chip;
+	chip->state = new_state;
+}
+
 /**
  * nand_get_device - [GENERIC] Get chip for selected access
  * @chip:	the nand chip descriptor
@@ -698,8 +740,14 @@ nand_get_device(struct nand_chip *chip, struct mtd_info *mtd, int new_state)
 		return 0;
 	}
 	if (new_state == FL_PM_SUSPENDED) {
-		spin_unlock(lock);
-		return (chip->state == FL_PM_SUSPENDED) ? 0 : -EAGAIN;
+		if (chip->controller->active->state == FL_PM_SUSPENDED) {
+			chip->state = FL_PM_SUSPENDED;
+			spin_unlock(lock);
+			return 0;
+		} else {
+			spin_unlock(lock);
+			return -EAGAIN;
+		}
 	}
 	set_current_state(TASK_UNINTERRUPTIBLE);
 	add_wait_queue(wq, &wait);
@@ -709,6 +757,32 @@ nand_get_device(struct nand_chip *chip, struct mtd_info *mtd, int new_state)
 	goto retry;
 }
 
+/**
+ * panic_nand_wait - [GENERIC]  wait until the command is done
+ * @mtd:	MTD device structure
+ * @chip:	NAND chip structure
+ * @timeo:	Timeout
+ *
+ * Wait for command done. This is a helper function for nand_wait used when
+ * we are in interrupt context. May happen when in panic and trying to write
+ * an oops trough mtdoops.
+ */
+static void panic_nand_wait(struct mtd_info *mtd, struct nand_chip *chip,
+			    unsigned long timeo)
+{
+	int i;
+	for (i = 0; i < timeo; i++) {
+		if (chip->dev_ready) {
+			if (chip->dev_ready(mtd))
+				break;
+		} else {
+			if (chip->read_byte(mtd) & NAND_STATUS_READY)
+				break;
+		}
+		mdelay(1);
+        }
+}
+
 /**
  * nand_wait - [DEFAULT]  wait until the command is done
  * @mtd:	MTD device structure
@@ -740,15 +814,19 @@ static int nand_wait(struct mtd_info *mtd, struct nand_chip *chip)
 	else
 		chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1);
 
-	while (time_before(jiffies, timeo)) {
-		if (chip->dev_ready) {
-			if (chip->dev_ready(mtd))
-				break;
-		} else {
-			if (chip->read_byte(mtd) & NAND_STATUS_READY)
-				break;
+	if (in_interrupt() || oops_in_progress)
+		panic_nand_wait(mtd, chip, timeo);
+	else {
+		while (time_before(jiffies, timeo)) {
+			if (chip->dev_ready) {
+				if (chip->dev_ready(mtd))
+					break;
+			} else {
+				if (chip->read_byte(mtd) & NAND_STATUS_READY)
+					break;
+			}
+			cond_resched();
 		}
-		cond_resched();
 	}
 	led_trigger_event(nand_led_trigger, LED_OFF);
 
@@ -1948,6 +2026,45 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to,
 	return ret;
 }
 
+/**
+ * panic_nand_write - [MTD Interface] NAND write with ECC
+ * @mtd:	MTD device structure
+ * @to:		offset to write to
+ * @len:	number of bytes to write
+ * @retlen:	pointer to variable to store the number of written bytes
+ * @buf:	the data to write
+ *
+ * NAND write with ECC. Used when performing writes in interrupt context, this
+ * may for example be called by mtdoops when writing an oops while in panic.
+ */
+static int panic_nand_write(struct mtd_info *mtd, loff_t to, size_t len,
+			    size_t *retlen, const uint8_t *buf)
+{
+	struct nand_chip *chip = mtd->priv;
+	int ret;
+
+	/* Do not allow reads past end of device */
+	if ((to + len) > mtd->size)
+		return -EINVAL;
+	if (!len)
+		return 0;
+
+	/* Wait for the device to get ready.  */
+	panic_nand_wait(mtd, chip, 400);
+
+	/* Grab the device.  */
+	panic_nand_get_device(chip, mtd, FL_WRITING);
+
+	chip->ops.len = len;
+	chip->ops.datbuf = (uint8_t *)buf;
+	chip->ops.oobbuf = NULL;
+
+	ret = nand_do_write_ops(mtd, to, &chip->ops);
+
+	*retlen = chip->ops.retlen;
+	return ret;
+}
+
 /**
  * nand_write - [MTD Interface] NAND write with ECC
  * @mtd:	MTD device structure
@@ -2645,7 +2762,8 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips)
 	type = nand_get_flash_type(mtd, chip, busw, &nand_maf_id);
 
 	if (IS_ERR(type)) {
-		printk(KERN_WARNING "No NAND device found!!!\n");
+		if (!(chip->options & NAND_SCAN_SILENT_NODEV))
+			printk(KERN_WARNING "No NAND device found.\n");
 		chip->select_chip(mtd, -1);
 		return PTR_ERR(type);
 	}
@@ -2877,6 +2995,7 @@ int nand_scan_tail(struct mtd_info *mtd)
 	mtd->unpoint = NULL;
 	mtd->read = nand_read;
 	mtd->write = nand_write;
+	mtd->panic_write = panic_nand_write;
 	mtd->read_oob = nand_read_oob;
 	mtd->write_oob = nand_write_oob;
 	mtd->sync = nand_sync;

drivers/mtd/nand/nand_bcm_umi.c

+/*****************************************************************************
+* Copyright 2004 - 2009 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+#include <mach/reg_umi.h>
+#include "nand_bcm_umi.h"
+#ifdef BOOT0_BUILD
+#include <uart.h>
+#endif
+
+/* ---- External Variable Declarations ----------------------------------- */
+/* ---- External Function Prototypes ------------------------------------- */
+/* ---- Public Variables ------------------------------------------------- */
+/* ---- Private Constants and Types -------------------------------------- */
+/* ---- Private Function Prototypes -------------------------------------- */
+/* ---- Private Variables ------------------------------------------------ */
+/* ---- Private Functions ------------------------------------------------ */
+
+#if NAND_ECC_BCH
+/****************************************************************************
+*  nand_bch_ecc_flip_bit - Routine to flip an errored bit
+*
+*  PURPOSE:
+*     This is a helper routine that flips the bit (0 -> 1 or 1 -> 0) of the
+*     errored bit specified
+*
+*  PARAMETERS:
+*     datap - Container that holds the 512 byte data
+*     errorLocation - Location of the bit that needs to be flipped
+*
+*  RETURNS:
+*     None
+****************************************************************************/
+static void nand_bcm_umi_bch_ecc_flip_bit(uint8_t *datap, int errorLocation)
+{
+	int locWithinAByte = (errorLocation & REG_UMI_BCH_ERR_LOC_BYTE) >> 0;
+	int locWithinAWord = (errorLocation & REG_UMI_BCH_ERR_LOC_WORD) >> 3;
+	int locWithinAPage = (errorLocation & REG_UMI_BCH_ERR_LOC_PAGE) >> 5;
+
+	uint8_t errorByte = 0;
+	uint8_t byteMask = 1 << locWithinAByte;
+
+	/* BCH uses big endian, need to change the location
+	 * bits to little endian */
+	locWithinAWord = 3 - locWithinAWord;
+
+	errorByte = datap[locWithinAPage * sizeof(uint32_t) + locWithinAWord];
+
+#ifdef BOOT0_BUILD
+	puthexs("\nECC Correct Offset: ",
+		locWithinAPage * sizeof(uint32_t) + locWithinAWord);
+	puthexs(" errorByte:", errorByte);
+	puthex8(" Bit: ", locWithinAByte);
+#endif
+
+	if (errorByte & byteMask) {
+		/* bit needs to be cleared */
+		errorByte &= ~byteMask;
+	} else {
+		/* bit needs to be set */
+		errorByte |= byteMask;
+	}
+
+	/* write back the value with the fixed bit */
+	datap[locWithinAPage * sizeof(uint32_t) + locWithinAWord] = errorByte;
+}
+
+/****************************************************************************
+*  nand_correct_page_bch - Routine to correct bit errors when reading NAND
+*
+*  PURPOSE:
+*     This routine reads the BCH registers to determine if there are any bit
+*     errors during the read of the last 512 bytes of data + ECC bytes.  If
+*     errors exists, the routine fixes it.
+*
+*  PARAMETERS:
+*     datap - Container that holds the 512 byte data
+*
+*  RETURNS:
+*     0 or greater = Number of errors corrected
+*                    (No errors are found or errors have been fixed)
+*    -1 = Error(s) cannot be fixed
+****************************************************************************/
+int nand_bcm_umi_bch_correct_page(uint8_t *datap, uint8_t *readEccData,
+				  int numEccBytes)
+{
+	int numErrors;
+	int errorLocation;
+	int idx;
+	uint32_t regValue;
+
+	/* wait for read ECC to be valid */
+	regValue = nand_bcm_umi_bch_poll_read_ecc_calc();
+
+	/*
+	 * read the control status register to determine if there
+	 * are error'ed bits
+	 * see if errors are correctible
+	 */
+	if ((regValue & REG_UMI_BCH_CTRL_STATUS_UNCORR_ERR) > 0) {
+		int i;
+
+		for (i = 0; i < numEccBytes; i++) {
+			if (readEccData[i] != 0xff) {
+				/* errors cannot be fixed, return -1 */
+				return -1;
+			}
+		}
+		/* If ECC is unprogrammed then we can't correct,
+		 * assume everything OK */
+		return 0;
+	}
+
+	if ((regValue & REG_UMI_BCH_CTRL_STATUS_CORR_ERR) == 0) {
+		/* no errors */
+		return 0;
+	}
+
+	/*
+	 * Fix errored bits by doing the following:
+	 * 1. Read the number of errors in the control and status register
+	 * 2. Read the error location registers that corresponds to the number
+	 *    of errors reported
+	 * 3. Invert the bit in the data
+	 */
+	numErrors = (regValue & REG_UMI_BCH_CTRL_STATUS_NB_CORR_ERROR) >> 20;
+
+	for (idx = 0; idx < numErrors; idx++) {
+		errorLocation =
+		    REG_UMI_BCH_ERR_LOC_ADDR(idx) & REG_UMI_BCH_ERR_LOC_MASK;
+
+		/* Flip bit */
+		nand_bcm_umi_bch_ecc_flip_bit(datap, errorLocation);
+	}
+	/* Errors corrected */
+	return numErrors;
+}
+#endif

drivers/mtd/nand/nand_ecc.c

@@ -150,20 +150,19 @@ static const char addressbits[256] = {
 };
 
 /**
- * nand_calculate_ecc - [NAND Interface] Calculate 3-byte ECC for 256/512-byte
+ * __nand_calculate_ecc - [NAND Interface] Calculate 3-byte ECC for 256/512-byte
  *			 block
- * @mtd:	MTD block structure
  * @buf:	input buffer with raw data
+ * @eccsize:	data bytes per ecc step (256 or 512)
  * @code:	output buffer with ECC
  */
-int nand_calculate_ecc(struct mtd_info *mtd, const unsigned char *buf,
+void __nand_calculate_ecc(const unsigned char *buf, unsigned int eccsize,
 		       unsigned char *code)
 {
 	int i;
 	const uint32_t *bp = (uint32_t *)buf;
 	/* 256 or 512 bytes/ecc  */
-	const uint32_t eccsize_mult =
-			(((struct nand_chip *)mtd->priv)->ecc.size) >> 8;
+	const uint32_t eccsize_mult = eccsize >> 8;
 	uint32_t cur;		/* current value in buffer */
 	/* rp0..rp15..rp17 are the various accumulated parities (per byte) */
 	uint32_t rp0, rp1, rp2, rp3, rp4, rp5, rp6, rp7;
@@ -412,6 +411,22 @@ int nand_calculate_ecc(struct mtd_info *mtd, const unsigned char *buf,
 		    (invparity[par & 0x55] << 2) |
 		    (invparity[rp17] << 1) |
 		    (invparity[rp16] << 0);
+}
+EXPORT_SYMBOL(__nand_calculate_ecc);
+
+/**
+ * nand_calculate_ecc - [NAND Interface] Calculate 3-byte ECC for 256/512-byte
+ *			 block
+ * @mtd:	MTD block structure
+ * @buf:	input buffer with raw data
+ * @code:	output buffer with ECC
+ */
+int nand_calculate_ecc(struct mtd_info *mtd, const unsigned char *buf,
+		       unsigned char *code)
+{
+	__nand_calculate_ecc(buf,
+			((struct nand_chip *)mtd->priv)->ecc.size, code);
+
 	return 0;
 }
 EXPORT_SYMBOL(nand_calculate_ecc);

drivers/mtd/nand/nandsim.c

@@ -161,7 +161,7 @@ MODULE_PARM_DESC(overridesize,   "Specifies the NAND Flash size overriding the I
 MODULE_PARM_DESC(cache_file,     "File to use to cache nand pages instead of memory");
 
 /* The largest possible page size */
-#define NS_LARGEST_PAGE_SIZE	2048
+#define NS_LARGEST_PAGE_SIZE	4096
 
 /* The prefix for simulator output */
 #define NS_OUTPUT_PREFIX "[nandsim]"
@@ -259,7 +259,8 @@ MODULE_PARM_DESC(cache_file,     "File to use to cache nand pages instead of mem
 #define OPT_SMARTMEDIA   0x00000010 /* SmartMedia technology chips */
 #define OPT_AUTOINCR     0x00000020 /* page number auto inctimentation is possible */
 #define OPT_PAGE512_8BIT 0x00000040 /* 512-byte page chips with 8-bit bus width */
-#define OPT_LARGEPAGE    (OPT_PAGE2048) /* 2048-byte page chips */
+#define OPT_PAGE4096     0x00000080 /* 4096-byte page chips */
+#define OPT_LARGEPAGE    (OPT_PAGE2048 | OPT_PAGE4096) /* 2048 & 4096-byte page chips */
 #define OPT_SMALLPAGE    (OPT_PAGE256  | OPT_PAGE512)  /* 256 and 512-byte page chips */
 
 /* Remove action bits ftom state */
@@ -588,6 +589,8 @@ static int init_nandsim(struct mtd_info *mtd)
 			ns->options |= OPT_PAGE512_8BIT;
 	} else if (ns->geom.pgsz == 2048) {
 		ns->options |= OPT_PAGE2048;
+	} else if (ns->geom.pgsz == 4096) {
+		ns->options |= OPT_PAGE4096;
 	} else {
 		NS_ERR("init_nandsim: unknown page size %u\n", ns->geom.pgsz);
 		return -EIO;

drivers/mtd/nand/s3c2410.c

@@ -774,7 +774,7 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info,
 	chip->select_chip  = s3c2410_nand_select_chip;
 	chip->chip_delay   = 50;
 	chip->priv	   = nmtd;
-	chip->options	   = 0;
+	chip->options	   = set->options;
 	chip->controller   = &info->controller;
 
 	switch (info->cpu_type) {

drivers/mtd/nand/txx9ndfmc.c

@@ -429,11 +429,10 @@ static int __exit txx9ndfmc_remove(struct platform_device *dev)
 		chip = mtd->priv;
 		txx9_priv = chip->priv;
 
+		nand_release(mtd);
 #ifdef CONFIG_MTD_PARTITIONS
-		del_mtd_partitions(mtd);
 		kfree(drvdata->parts[i]);
 #endif
-		del_mtd_device(mtd);
 		kfree(txx9_priv->mtdname);
 		kfree(txx9_priv);
 	}

drivers/mtd/onenand/omap2.c

@@ -112,10 +112,24 @@ static int omap2_onenand_wait(struct mtd_info *mtd, int state)
 	unsigned long timeout;
 	u32 syscfg;
 
-	if (state == FL_RESETING) {
-		int i;
+	if (state == FL_RESETING || state == FL_PREPARING_ERASE ||
+	    state == FL_VERIFYING_ERASE) {
+		int i = 21;
+		unsigned int intr_flags = ONENAND_INT_MASTER;
+
+		switch (state) {
+		case FL_RESETING:
+			intr_flags |= ONENAND_INT_RESET;
+			break;
+		case FL_PREPARING_ERASE:
+			intr_flags |= ONENAND_INT_ERASE;
+			break;
+		case FL_VERIFYING_ERASE:
+			i = 101;
+			break;
+		}
 
-		for (i = 0; i < 20; i++) {
+		while (--i) {
 			udelay(1);
 			intr = read_reg(c, ONENAND_REG_INTERRUPT);
 			if (intr & ONENAND_INT_MASTER)
@@ -126,7 +140,7 @@ static int omap2_onenand_wait(struct mtd_info *mtd, int state)
 			wait_err("controller error", state, ctrl, intr);
 			return -EIO;
 		}
-		if (!(intr & ONENAND_INT_RESET)) {
+		if ((intr & intr_flags) != intr_flags) {
 			wait_err("timeout", state, ctrl, intr);
 			return -EIO;
 		}

drivers/mtd/tests/Makefile

@@ -5,3 +5,4 @@ obj-$(CONFIG_MTD_TESTS) += mtd_speedtest.o
 obj-$(CONFIG_MTD_TESTS) += mtd_stresstest.o
 obj-$(CONFIG_MTD_TESTS) += mtd_subpagetest.o
 obj-$(CONFIG_MTD_TESTS) += mtd_torturetest.o
+obj-$(CONFIG_MTD_TESTS) += mtd_nandecctest.o

drivers/mtd/tests/mtd_oobtest.c

@@ -343,7 +343,6 @@ static int scan_for_bad_eraseblocks(void)
 		printk(PRINT_PREF "error: cannot allocate memory\n");
 		return -ENOMEM;
 	}
-	memset(bbt, 0 , ebcnt);
 
 	printk(PRINT_PREF "scanning for bad eraseblocks\n");
 	for (i = 0; i < ebcnt; ++i) {
@@ -392,7 +391,6 @@ static int __init mtd_oobtest_init(void)
 	       mtd->writesize, ebcnt, pgcnt, mtd->oobsize);
 
 	err = -ENOMEM;
-	mtd->erasesize = mtd->erasesize;
 	readbuf = kmalloc(mtd->erasesize, GFP_KERNEL);
 	if (!readbuf) {
 		printk(PRINT_PREF "error: cannot allocate memory\n");
@@ -476,18 +474,10 @@ static int __init mtd_oobtest_init(void)
 	use_len_max = mtd->ecclayout->oobavail;
 	vary_offset = 1;
 	simple_srand(5);
-	printk(PRINT_PREF "writing OOBs of whole device\n");
-	for (i = 0; i < ebcnt; ++i) {
-		if (bbt[i])
-			continue;
-		err = write_eraseblock(i);
-		if (err)
-			goto out;
-		if (i % 256 == 0)
-			printk(PRINT_PREF "written up to eraseblock %u\n", i);
-		cond_resched();
-	}
-	printk(PRINT_PREF "written %u eraseblocks\n", i);
+
+	err = write_whole_device();
+	if (err)
+		goto out;
 
 	/* Check all eraseblocks */
 	use_offset = 0;