drm/i915: implement WaForceL3Serialization on VLV and IVB

References: https://bugs.freedesktop.org/show_bug.cgi?id=50250Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drivers/gpu/drm/i915/i915_reg.h

@@ -3448,6 +3448,9 @@
 #define GEN7_L3_CHICKEN_MODE_REGISTER		0xB030
 #define  GEN7_WA_L3_CHICKEN_MODE				0x20000000
 
+#define GEN7_L3SQCREG4				0xb034
+#define  L3SQ_URB_READ_CAM_MATCH_DISABLE	(1<<27)
+
 /* WaCatErrorRejectionIssue */
 #define GEN7_SQ_CHICKEN_MBCUNIT_CONFIG		0x9030
 #define  GEN7_SQ_CHICKEN_MBCUNIT_SQINTMOB	(1<<11)

drivers/gpu/drm/i915/intel_pm.c

@@ -3547,6 +3547,10 @@ static void ivybridge_init_clock_gating(struct drm_device *dev)
 	I915_WRITE(GEN7_L3_CHICKEN_MODE_REGISTER,
 			GEN7_WA_L3_CHICKEN_MODE);
 
+	/* WaForceL3Serialization */
+	I915_WRITE(GEN7_L3SQCREG4, I915_READ(GEN7_L3SQCREG4) &
+		   ~L3SQ_URB_READ_CAM_MATCH_DISABLE);
+
 	/* According to the BSpec vol1g, bit 12 (RCPBUNIT) clock
 	 * gating disable must be set.  Failure to set it results in
 	 * flickering pixels due to Z write ordering failures after
@@ -3617,6 +3621,10 @@ static void valleyview_init_clock_gating(struct drm_device *dev)
 	I915_WRITE(GEN7_L3CNTLREG1, GEN7_WA_FOR_GEN7_L3_CONTROL);
 	I915_WRITE(GEN7_L3_CHICKEN_MODE_REGISTER, GEN7_WA_L3_CHICKEN_MODE);
 
+	/* WaForceL3Serialization */
+	I915_WRITE(GEN7_L3SQCREG4, I915_READ(GEN7_L3SQCREG4) &
+		   ~L3SQ_URB_READ_CAM_MATCH_DISABLE);
+
 	/* This is required by WaCatErrorRejectionIssue */
 	I915_WRITE(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG,
 		   I915_READ(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG) |