Commit 63328ada authored by Jacob Keller's avatar Jacob Keller Committed by Jeff Kirsher

ixgbe: extract PTP clock device from ptp_init

In order to properly handle a suspend/resume cycle, we cannot destroy
the PTP clock device. As part of this, we should only re-create the
device on first initialization. After a resume, when ixgbe_ptp_init is
called, we won't create a new clock, and we will use the old clock
device. To that end, this patch extracts the clock creation out of
ptp_init, and only calls it if we don't already have a ptp_clock
pointer.
Signed-off-by: default avatarJacob Keller <jacob.e.keller@intel.com>
Tested-by: default avatarPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
parent d6321407
......@@ -851,16 +851,23 @@ void ixgbe_ptp_reset(struct ixgbe_adapter *adapter)
}
/**
* ixgbe_ptp_init
* ixgbe_ptp_create_clock
* @adapter: the ixgbe private adapter structure
*
* This function performs the required steps for enabling ptp
* support. If ptp support has already been loaded it simply calls the
* cyclecounter init routine and exits.
* This function performs setup of the user entry point function table and
* initializes the PTP clock device, which is used to access the clock-like
* features of the PTP core. It will be called by ixgbe_ptp_init, only if
* there isn't already a clock device (such as after a suspend/resume cycle,
* where the clock device wasn't destroyed).
*/
void ixgbe_ptp_init(struct ixgbe_adapter *adapter)
static int ixgbe_ptp_create_clock(struct ixgbe_adapter *adapter)
{
struct net_device *netdev = adapter->netdev;
long err;
/* do nothing if we already have a clock device */
if (!IS_ERR_OR_NULL(adapter->ptp_clock))
return 0;
switch (adapter->hw.mac.type) {
case ixgbe_mac_X540:
......@@ -897,22 +904,53 @@ void ixgbe_ptp_init(struct ixgbe_adapter *adapter)
break;
default:
adapter->ptp_clock = NULL;
return;
return -EOPNOTSUPP;
}
spin_lock_init(&adapter->tmreg_lock);
INIT_WORK(&adapter->ptp_tx_work, ixgbe_ptp_tx_hwtstamp_work);
adapter->ptp_clock = ptp_clock_register(&adapter->ptp_caps,
&adapter->pdev->dev);
if (IS_ERR(adapter->ptp_clock)) {
err = PTR_ERR(adapter->ptp_clock);
adapter->ptp_clock = NULL;
e_dev_err("ptp_clock_register failed\n");
return err;
} else
e_dev_info("registered PHC device on %s\n", netdev->name);
/* set default timestamp mode to disabled here. We do this in
* create_clock instead of init, because we don't want to override the
* previous settings during a resume cycle.
*/
adapter->tstamp_config.rx_filter = HWTSTAMP_FILTER_NONE;
adapter->tstamp_config.tx_type = HWTSTAMP_TX_OFF;
return 0;
}
/**
* ixgbe_ptp_init
* @adapter: the ixgbe private adapter structure
*
* This function performs the required steps for enabling PTP
* support. If PTP support has already been loaded it simply calls the
* cyclecounter init routine and exits.
*/
void ixgbe_ptp_init(struct ixgbe_adapter *adapter)
{
/* initialize the spin lock first since we can't control when a user
* will call the entry functions once we have initialized the clock
* device
*/
spin_lock_init(&adapter->tmreg_lock);
/* obtain a PTP device, or re-use an existing device */
if (ixgbe_ptp_create_clock(adapter))
return;
/* we have a clock so we can initialize work now */
INIT_WORK(&adapter->ptp_tx_work, ixgbe_ptp_tx_hwtstamp_work);
/* reset the PTP related hardware bits */
ixgbe_ptp_reset(adapter);
/* enter the IXGBE_PTP_RUNNING state */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment