Merge redhat.com:/spare/repo/netdev-2.6/misc

into redhat.com:/spare/repo/net-drivers-2.6

drivers/net/pcmcia/3c574_cs.c

@@ -384,6 +384,8 @@ static void tc574_detach(dev_link_t *link)
 #define CS_CHECK(fn, ret) \
   do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
 
+static char *ram_split[] = {"5:3", "3:1", "1:1", "3:5"};
+
 static void tc574_config(dev_link_t *link)
 {
 	client_handle_t handle = link->handle;
@@ -396,6 +398,7 @@ static void tc574_config(dev_link_t *link)
 	ioaddr_t ioaddr;
 	u16 *phys_addr;
 	char *cardname;
+	union wn3_config config;
 
 	phys_addr = (u16 *)dev->dev_addr;
 
@@ -431,15 +434,7 @@ static void tc574_config(dev_link_t *link)
 	dev->irq = link->irq.AssignedIRQ;
 	dev->base_addr = link->io.BasePort1;
 
-	if (register_netdev(dev) != 0) {
-		printk(KERN_NOTICE "3c574_cs: register_netdev() failed\n");
-		goto failed;
-	}
-
 	ioaddr = dev->base_addr;
-	strcpy(lp->node.dev_name, dev->name);
-	link->dev = &lp->node;
-	link->state &= ~DEV_CONFIG_PENDING;
 
 	/* The 3c574 normally uses an EEPROM for configuration info, including
 	   the hardware address.  The future products may include a modem chip
@@ -467,24 +462,14 @@ static void tc574_config(dev_link_t *link)
 	} else
 		cardname = "3Com 3c574";
 
-	printk(KERN_INFO "%s: %s at io %#3lx, irq %d, hw_addr ",
-		   dev->name, cardname, dev->base_addr, dev->irq);
-
-	for (i = 0; i < 6; i++)
-		printk("%02X%s", dev->dev_addr[i], ((i<5) ? ":" : ".\n"));
-
 	{
-		u_char mcr, *ram_split[] = {"5:3", "3:1", "1:1", "3:5"};
-		union wn3_config config;
+		u_char mcr;
 		outw(2<<11, ioaddr + RunnerRdCtrl);
 		mcr = inb(ioaddr + 2);
 		outw(0<<11, ioaddr + RunnerRdCtrl);
 		printk(KERN_INFO "  ASIC rev %d,", mcr>>3);
 		EL3WINDOW(3);
 		config.i = inl(ioaddr + Wn3_Config);
-		printk(" %dK FIFO split %s Rx:Tx, %sMII interface.\n",
-			   8 << config.u.ram_size, ram_split[config.u.ram_split],
-			   config.u.autoselect ? "autoselect " : "");
 		lp->default_media = config.u.xcvr;
 		lp->autoselect = config.u.autoselect;
 	}
@@ -531,6 +516,25 @@ static void tc574_config(dev_link_t *link)
 		}
 	}
 
+	link->state &= ~DEV_CONFIG_PENDING;
+	link->dev = &lp->node;
+
+	if (register_netdev(dev) != 0) {
+		printk(KERN_NOTICE "3c574_cs: register_netdev() failed\n");
+		link->dev = NULL;
+		goto failed;
+	}
+
+	strcpy(lp->node.dev_name, dev->name);
+
+	printk(KERN_INFO "%s: %s at io %#3lx, irq %d, hw_addr ",
+		   dev->name, cardname, dev->base_addr, dev->irq);
+	for (i = 0; i < 6; i++)
+		printk("%02X%s", dev->dev_addr[i], ((i<5) ? ":" : ".\n"));
+	printk(" %dK FIFO split %s Rx:Tx, %sMII interface.\n",
+		   8 << config.u.ram_size, ram_split[config.u.ram_split],
+		   config.u.autoselect ? "autoselect " : "");
+
 	return;
 
 cs_failed:

drivers/net/pcmcia/3c589_cs.c

@@ -308,7 +308,7 @@ static void tc589_config(dev_link_t *link)
     tuple_t tuple;
     cisparse_t parse;
     u16 buf[32], *phys_addr;
-    int last_fn, last_ret, i, j, multi = 0;
+    int last_fn, last_ret, i, j, multi = 0, fifo;
     ioaddr_t ioaddr;
     char *ram_split[] = {"5:3", "3:1", "1:1", "3:5"};
     
@@ -357,11 +357,6 @@ static void tc589_config(dev_link_t *link)
 	
     dev->irq = link->irq.AssignedIRQ;
     dev->base_addr = link->io.BasePort1;
-    if (register_netdev(dev) != 0) {
-	printk(KERN_ERR "3c589_cs: register_netdev() failed\n");
-	goto failed;
-    }
-    
     ioaddr = dev->base_addr;
     EL3WINDOW(0);
 
@@ -382,13 +377,10 @@ static void tc589_config(dev_link_t *link)
 	}
     }
 
-    strcpy(lp->node.dev_name, dev->name);
-    link->dev = &lp->node;
-    link->state &= ~DEV_CONFIG_PENDING;
-    
     /* The address and resource configuration register aren't loaded from
        the EEPROM and *must* be set to 0 and IRQ3 for the PCMCIA version. */
     outw(0x3f00, ioaddr + 8);
+    fifo = inl(ioaddr);
 
     /* The if_port symbol can be set when the module is loaded */
     if ((if_port >= 0) && (if_port <= 3))
@@ -396,14 +388,24 @@ static void tc589_config(dev_link_t *link)
     else
 	printk(KERN_ERR "3c589_cs: invalid if_port requested\n");
     
+    link->dev = &lp->node;
+    link->state &= ~DEV_CONFIG_PENDING;
+
+    if (register_netdev(dev) != 0) {
+	printk(KERN_ERR "3c589_cs: register_netdev() failed\n");
+	link->dev = NULL;
+	goto failed;
+    }
+
+    strcpy(lp->node.dev_name, dev->name);
+
     printk(KERN_INFO "%s: 3Com 3c%s, io %#3lx, irq %d, hw_addr ",
 	   dev->name, (multi ? "562" : "589"), dev->base_addr,
 	   dev->irq);
     for (i = 0; i < 6; i++)
 	printk("%02X%s", dev->dev_addr[i], ((i<5) ? ":" : "\n"));
-    i = inl(ioaddr);
     printk(KERN_INFO "  %dK FIFO split %s Rx:Tx, %s xcvr\n",
-	   (i & 7) ? 32 : 8, ram_split[(i >> 16) & 3],
+	   (fifo & 7) ? 32 : 8, ram_split[(fifo >> 16) & 3],
 	   if_names[dev->if_port]);
     return;
 

drivers/net/pcmcia/axnet_cs.c

@@ -430,19 +430,11 @@ static void axnet_config(dev_link_t *link)
     ei_status.block_input = &block_input;
     ei_status.block_output = &block_output;
 
-    strcpy(info->node.dev_name, dev->name);
-
     if (inb(dev->base_addr + AXNET_TEST) != 0)
 	info->flags |= IS_AX88790;
     else
 	info->flags |= IS_AX88190;
 
-    printk(KERN_INFO "%s: Asix AX88%d90: io %#3lx, irq %d, hw_addr ",
-	   dev->name, ((info->flags & IS_AX88790) ? 7 : 1),
-	   dev->base_addr, dev->irq);
-    for (i = 0; i < 6; i++)
-	printk("%02X%s", dev->dev_addr[i], ((i<5) ? ":" : "\n"));
-
     if (info->flags & IS_AX88790)
 	outb(0x10, dev->base_addr + AXNET_GPIO);  /* select Internal PHY */
 
@@ -463,19 +455,27 @@ static void axnet_config(dev_link_t *link)
     }
 
     info->phy_id = (i < 32) ? i : -1;
-    if (i < 32) {
-	DEBUG(0, "  MII transceiver at index %d, status %x.\n", i, j);
-    } else {
-	printk(KERN_NOTICE "  No MII transceivers found!\n");
-    }
+    link->dev = &info->node;
+    link->state &= ~DEV_CONFIG_PENDING;
 
     if (register_netdev(dev) != 0) {
 	printk(KERN_NOTICE "axnet_cs: register_netdev() failed\n");
+	link->dev = NULL;
 	goto failed;
     }
 
-    link->dev = &info->node;
-    link->state &= ~DEV_CONFIG_PENDING;
+    strcpy(info->node.dev_name, dev->name);
+
+    printk(KERN_INFO "%s: Asix AX88%d90: io %#3lx, irq %d, hw_addr ",
+	   dev->name, ((info->flags & IS_AX88790) ? 7 : 1),
+	   dev->base_addr, dev->irq);
+    for (i = 0; i < 6; i++)
+	printk("%02X%s", dev->dev_addr[i], ((i<5) ? ":" : "\n"));
+    if (info->phy_id != -1) {
+	DEBUG(0, "  MII transceiver at index %d, status %x.\n", info->phy_id, j);
+    } else {
+	printk(KERN_NOTICE "  No MII transceivers found!\n");
+    }
     return;
 
 cs_failed:

drivers/net/pcmcia/com20020_cs.c

@@ -141,7 +141,6 @@ static dev_link_t *dev_list;
 
 typedef struct com20020_dev_t {
     struct net_device       *dev;
-    int dev_configured;
     dev_node_t          node;
 } com20020_dev_t;
 
@@ -277,13 +276,10 @@ static void com20020_detach(dev_link_t *link)
 	dev = info->dev;
 	if (dev)
 	{
-	    if (info->dev_configured)
+	    if (link->dev)
 	    {
 		DEBUG(1,"unregister...\n");
 
-		if (netif_running(dev))
-		    dev->stop(dev);
-
 		unregister_netdev(dev);
 	    
 		/*
@@ -398,17 +394,18 @@ static void com20020_config(dev_link_t *link)
     lp->card_name = "PCMCIA COM20020";
     lp->card_flags = ARC_CAN_10MBIT; /* pretend all of them can 10Mbit */
 
+    link->dev = &info->node;
+    link->state &= ~DEV_CONFIG_PENDING;
+
     i = com20020_found(dev, 0);	/* calls register_netdev */
     
     if (i != 0) {
 	DEBUG(1,KERN_NOTICE "com20020_cs: com20020_found() failed\n");
+	link->dev = NULL;
 	goto failed;
     }
 
-    info->dev_configured = 1;
     strcpy(info->node.dev_name, dev->name);
-    link->dev = &info->node;
-    link->state &= ~DEV_CONFIG_PENDING;
 
     DEBUG(1,KERN_INFO "%s: port %#3lx, irq %d\n",
            dev->name, dev->base_addr, dev->irq);

drivers/net/pcmcia/fmvj18x_cs.c

@@ -510,10 +510,6 @@ static void fmvj18x_config(dev_link_t *link)
     CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link->handle, &link->conf));
     dev->irq = link->irq.AssignedIRQ;
     dev->base_addr = link->io.BasePort1;
-    if (register_netdev(dev) != 0) {
-	printk(KERN_NOTICE "fmvj18x_cs: register_netdev() failed\n");
-	goto failed;
-    }
 
     if (link->io.BasePort2 != 0)
 	fmvj18x_setup_mfc(link);
@@ -575,7 +571,6 @@ static void fmvj18x_config(dev_link_t *link)
 	/* Read MACID from Buggy CIS */
 	if (fmvj18x_get_hwinfo(link, tuple.TupleData) == -1) {
 	    printk(KERN_NOTICE "fmvj18x_cs: unable to read hardware net address.\n");
-	    unregister_netdev(dev);
 	    goto failed;
 	}
 	for (i = 0 ; i < 6; i++) {
@@ -592,10 +587,18 @@ static void fmvj18x_config(dev_link_t *link)
 	break;
     }
 
-    strcpy(lp->node.dev_name, dev->name);
+    lp->cardtype = cardtype;
     link->dev = &lp->node;
+    link->state &= ~DEV_CONFIG_PENDING;
+
+    if (register_netdev(dev) != 0) {
+	printk(KERN_NOTICE "fmvj18x_cs: register_netdev() failed\n");
+	link->dev = NULL;
+	goto failed;
+    }
+
+    strcpy(lp->node.dev_name, dev->name);
 
-    lp->cardtype = cardtype;
     /* print current configuration */
     printk(KERN_INFO "%s: %s, sram %s, port %#3lx, irq %d, hw_addr ", 
 	   dev->name, card_name, sram_config == 0 ? "4K TX*2" : "8K TX*2", 
@@ -603,7 +606,6 @@ static void fmvj18x_config(dev_link_t *link)
     for (i = 0; i < 6; i++)
 	printk("%02X%s", dev->dev_addr[i], ((i<5) ? ":" : "\n"));
 
-    link->state &= ~DEV_CONFIG_PENDING;
     return;
     
 cs_failed:

drivers/net/pcmcia/ibmtr_cs.c

@@ -317,13 +317,10 @@ static void ibmtr_config(dev_link_t *link)
     /* Try PRIMARY card at 0xA20-0xA23 */
     link->io.BasePort1 = 0xA20;
     i = pcmcia_request_io(link->handle, &link->io);
-    if (i == CS_SUCCESS) {
-	memcpy(info->node.dev_name, "tr0\0", 4);
-    } else {
+    if (i != CS_SUCCESS) {
 	/* Couldn't get 0xA20-0xA23.  Try ALTERNATE at 0xA24-0xA27. */
 	link->io.BasePort1 = 0xA24;
 	CS_CHECK(RequestIO, pcmcia_request_io(link->handle, &link->io));
-	memcpy(info->node.dev_name, "tr1\0", 4);
     }
     dev->base_addr = link->io.BasePort1;
 
@@ -367,15 +364,17 @@ static void ibmtr_config(dev_link_t *link)
         Adapters Technical Reference"  SC30-3585 for this info.  */
     ibmtr_hw_setup(dev, mmiobase);
 
+    link->dev = &info->node;
+    link->state &= ~DEV_CONFIG_PENDING;
+
     i = ibmtr_probe_card(dev);
-    
     if (i != 0) {
 	printk(KERN_NOTICE "ibmtr_cs: register_netdev() failed\n");
+	link->dev = NULL;
 	goto failed;
     }
 
-    link->dev = &info->node;
-    link->state &= ~DEV_CONFIG_PENDING;
+    strcpy(info->node.dev_name, dev->name);
 
     printk(KERN_INFO "%s: port %#3lx, irq %d,",
            dev->name, dev->base_addr, dev->irq);

drivers/net/pcmcia/nmclan_cs.c

@@ -734,11 +734,6 @@ static void nmclan_config(dev_link_t *link)
   CS_CHECK(RequestConfiguration, pcmcia_request_configuration(handle, &link->conf));
   dev->irq = link->irq.AssignedIRQ;
   dev->base_addr = link->io.BasePort1;
-  i = register_netdev(dev);
-  if (i != 0) {
-    printk(KERN_NOTICE "nmclan_cs: register_netdev() failed\n");
-    goto failed;
-  }
 
   ioaddr = dev->base_addr;
 
@@ -777,10 +772,18 @@ static void nmclan_config(dev_link_t *link)
   else
     printk(KERN_NOTICE "nmclan_cs: invalid if_port requested\n");
 
-  strcpy(lp->node.dev_name, dev->name);
   link->dev = &lp->node;
   link->state &= ~DEV_CONFIG_PENDING;
 
+  i = register_netdev(dev);
+  if (i != 0) {
+    printk(KERN_NOTICE "nmclan_cs: register_netdev() failed\n");
+    link->dev = NULL;
+    goto failed;
+  }
+
+  strcpy(lp->node.dev_name, dev->name);
+
   printk(KERN_INFO "%s: nmclan: port %#3lx, irq %d, %s port, hw_addr ",
 	 dev->name, dev->base_addr, dev->irq, if_names[dev->if_port]);
   for (i = 0; i < 6; i++)

drivers/net/pcmcia/smc91c92_cs.c

@@ -901,6 +901,7 @@ static void smc91c92_config(dev_link_t *link)
     char *name;
     int i, j, rev;
     ioaddr_t ioaddr;
+    u_long mir;
 
     DEBUG(0, "smc91c92_config(0x%p)\n", link);
 
@@ -952,11 +953,6 @@ static void smc91c92_config(dev_link_t *link)
     else
 	printk(KERN_NOTICE "smc91c92_cs: invalid if_port requested\n");
 
-    if (register_netdev(dev) != 0) {
-	printk(KERN_ERR "smc91c92_cs: register_netdev() failed\n");
-	goto config_undo;
-    }
-
     switch (smc->manfid) {
     case MANFID_OSITECH:
     case MANFID_PSION:
@@ -977,8 +973,6 @@ static void smc91c92_config(dev_link_t *link)
 	goto config_undo;
     }
 
-    strcpy(smc->node.dev_name, dev->name);
-    link->dev = &smc->node;
     smc->duplex = 0;
     smc->rx_ovrn = 0;
 
@@ -993,25 +987,16 @@ static void smc91c92_config(dev_link_t *link)
 	case 8: name = "100-FD"; break;
 	case 9: name = "110"; break;
 	}
-    printk(KERN_INFO "%s: smc91c%s rev %d: io %#3lx, irq %d, "
-	   "hw_addr ", dev->name, name, (rev & 0x0f), dev->base_addr,
-	   dev->irq);
-    for (i = 0; i < 6; i++)
-	printk("%02X%s", dev->dev_addr[i], ((i<5) ? ":" : "\n"));
 
     ioaddr = dev->base_addr;
     if (rev > 0) {
-	u_long mir, mcr;
+	u_long mcr;
 	SMC_SELECT_BANK(0);
 	mir = inw(ioaddr + MEMINFO) & 0xff;
 	if (mir == 0xff) mir++;
 	/* Get scale factor for memory size */
 	mcr = ((rev >> 4) > 3) ? inw(ioaddr + MEMCFG) : 0x0200;
 	mir *= 128 * (1<<((mcr >> 9) & 7));
-	if (mir & 0x3ff)
-	    printk(KERN_INFO "  %lu byte", mir);
-	else
-	    printk(KERN_INFO "  %lu kb", mir>>10);
 	SMC_SELECT_BANK(1);
 	smc->cfg = inw(ioaddr + CONFIG) & ~CFG_AUI_SELECT;
 	smc->cfg |= CFG_NO_WAIT | CFG_16BIT | CFG_STATIC;
@@ -1019,9 +1004,8 @@ static void smc91c92_config(dev_link_t *link)
 	    smc->cfg |= CFG_IRQ_SEL_1 | CFG_IRQ_SEL_0;
 	if ((rev >> 4) >= 7)
 	    smc->cfg |= CFG_MII_SELECT;
-	printk(" buffer, %s xcvr\n", (smc->cfg & CFG_MII_SELECT) ?
-	       "MII" : if_names[dev->if_port]);
-    }
+    } else
+	mir = 0;
 
     if (smc->cfg & CFG_MII_SELECT) {
 	SMC_SELECT_BANK(3);
@@ -1031,16 +1015,45 @@ static void smc91c92_config(dev_link_t *link)
 	    if ((j != 0) && (j != 0xffff)) break;
 	}
 	smc->mii_if.phy_id = (i < 32) ? i : -1;
-	if (i < 32) {
-	    DEBUG(0, "  MII transceiver at index %d, status %x.\n", i, j);
-	} else {
-    	    printk(KERN_NOTICE "  No MII transceivers found!\n");
-	}
 
 	SMC_SELECT_BANK(0);
     }
 
+    link->dev = &smc->node;
     link->state &= ~DEV_CONFIG_PENDING;
+
+    if (register_netdev(dev) != 0) {
+	printk(KERN_ERR "smc91c92_cs: register_netdev() failed\n");
+	link->dev = NULL;
+	goto config_undo;
+    }
+
+    strcpy(smc->node.dev_name, dev->name);
+
+    printk(KERN_INFO "%s: smc91c%s rev %d: io %#3lx, irq %d, "
+	   "hw_addr ", dev->name, name, (rev & 0x0f), dev->base_addr,
+	   dev->irq);
+    for (i = 0; i < 6; i++)
+	printk("%02X%s", dev->dev_addr[i], ((i<5) ? ":" : "\n"));
+
+    if (rev > 0) {
+	if (mir & 0x3ff)
+	    printk(KERN_INFO "  %lu byte", mir);
+	else
+	    printk(KERN_INFO "  %lu kb", mir>>10);
+	printk(" buffer, %s xcvr\n", (smc->cfg & CFG_MII_SELECT) ?
+	       "MII" : if_names[dev->if_port]);
+    }
+
+    if (smc->cfg & CFG_MII_SELECT) {
+	if (smc->mii_if.phy_id != -1) {
+	    DEBUG(0, "  MII transceiver at index %d, status %x.\n",
+		  smc->mii_if.phy_id, j);
+	} else {
+    	    printk(KERN_NOTICE "  No MII transceivers found!\n");
+	}
+    }
+
     return;
 
 config_undo:

drivers/net/pcmcia/xirc2ps_cs.c

@@ -1114,17 +1114,20 @@ xirc2ps_config(dev_link_t * link)
     /* we can now register the device with the net subsystem */
     dev->irq = link->irq.AssignedIRQ;
     dev->base_addr = link->io.BasePort1;
+
+    if (local->dingo)
+	do_reset(dev, 1); /* a kludge to make the cem56 work */
+
+    link->dev = &local->node;
+    link->state &= ~DEV_CONFIG_PENDING;
+
     if ((err=register_netdev(dev))) {
 	printk(KNOT_XIRC "register_netdev() failed\n");
+	link->dev = NULL;
 	goto config_error;
     }
 
     strcpy(local->node.dev_name, dev->name);
-    link->dev = &local->node;
-    link->state &= ~DEV_CONFIG_PENDING;
-
-    if (local->dingo)
-	do_reset(dev, 1); /* a kludge to make the cem56 work */
 
     /* give some infos about the hardware */
     printk(KERN_INFO "%s: %s: port %#3lx, irq %d, hwaddr",

drivers/net/tulip/tulip_core.c

@@ -1761,11 +1761,11 @@ static void __devexit tulip_remove_one (struct pci_dev *pdev)
 		return;
 
 	tp = netdev_priv(dev);
+	unregister_netdev(dev);
 	pci_free_consistent (pdev,
 			     sizeof (struct tulip_rx_desc) * RX_RING_SIZE +
 			     sizeof (struct tulip_tx_desc) * TX_RING_SIZE,
 			     tp->rx_ring, tp->rx_ring_dma);
-	unregister_netdev (dev);
 	if (tp->mtable)
 		kfree (tp->mtable);
 #ifndef USE_IO_OPS

drivers/net/wireless/atmel_cs.c

@@ -54,7 +54,6 @@
 #include <asm/io.h>
 #include <asm/system.h>
 #include <linux/wireless.h>
-#include <linux/802_11.h>
 
 
 /*
@@ -104,7 +103,7 @@ MODULE_PARM(irq_list, "1-4i");
 struct net_device *init_atmel_card(int, int, char *, struct device *, 
 				    int (*present_func)(void *), void * );
 void stop_atmel_card( struct net_device *, int );
-int reset_atmel_card( struct net_device * );
+int atmel_open( struct net_device * );
 
 static void atmel_config(dev_link_t *link);
 static void atmel_release(dev_link_t *link);
@@ -335,7 +334,7 @@ static struct {
 	{ 0, 0, "ATMEL/AT76C504A", "atmel_at76c504a_2958%s.bin", "NoName-504a-2958" },
 	{ 0, 0, "ATMEL/AT76C504_R", "atmel_at76c504_2958%s.bin", "NoName-504-2958" },
 	{ MANFID_3COM, 0x0620, NULL, "atmel_at76c502_3com%s.bin", "3com 3CRWE62092B" }, 
-	{ MANFID_3COM, 0x0696, NULL, "atmel_at76c502_3com%s.bin", "3com 3CRSHPW_96" }, 
+	{ MANFID_3COM, 0x0696, NULL, "atmel_at76c502_3com%s.bin", "3com 3CRSHPW196" }, 
 	{ 0, 0, "SMC/2632W-V2", "atmel_at76c502%s.bin", "SMC 2632W-V2" },
         { 0, 0, "SMC/2632W", "atmel_at76c502d%s.bin", "SMC 2632W-V3" },
 	{ 0xd601, 0x0007, NULL, "atmel_at76c502%s.bin", "Sitecom WLAN-011" }, 
@@ -661,7 +660,7 @@ static int atmel_event(event_t event, int priority,
 	case CS_EVENT_CARD_RESET:
 		if (link->state & DEV_CONFIG) {
 			pcmcia_request_configuration(link->handle, &link->conf);
-			reset_atmel_card(local->eth_dev);
+			atmel_open(local->eth_dev);
 			netif_device_attach(local->eth_dev);
 		}
 		break;