ARM: shmobile: r8a7791 SMP support

Tie in the APMU SMP code on r8a7791. When used together
with the secondary CPU device node and smp_ops in the
board specific code then this will allow use of the
two Cortex-A15 cores in the r8a7791 SoC.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

arch/arm/mach-shmobile/Makefile

@@ -40,6 +40,7 @@ smp-y				:= platsmp.o headsmp.o
 smp-$(CONFIG_ARCH_SH73A0)	+= smp-sh73a0.o headsmp-scu.o platsmp-scu.o
 smp-$(CONFIG_ARCH_R8A7779)	+= smp-r8a7779.o headsmp-scu.o platsmp-scu.o
 smp-$(CONFIG_ARCH_R8A7790)	+= smp-r8a7790.o platsmp-apmu.o
+smp-$(CONFIG_ARCH_R8A7791)	+= smp-r8a7791.o platsmp-apmu.o
 smp-$(CONFIG_ARCH_EMEV2)	+= smp-emev2.o headsmp-scu.o platsmp-scu.o
 
 # IRQ objects

arch/arm/mach-shmobile/include/mach/r8a7791.h

@@ -5,5 +5,6 @@ void r8a7791_add_standard_devices(void);
 void r8a7791_add_dt_devices(void);
 void r8a7791_clock_init(void);
 void r8a7791_init_early(void);
+extern struct smp_operations r8a7791_smp_ops;
 
 #endif /* __ASM_R8A7791_H__ */

arch/arm/mach-shmobile/setup-r8a7791.c

@@ -176,6 +176,7 @@ static const char *r8a7791_boards_compat_dt[] __initdata = {
 };
 
 DT_MACHINE_START(R8A7791_DT, "Generic R8A7791 (Flattened Device Tree)")
+	.smp		= smp_ops(r8a7791_smp_ops),
 	.init_early	= r8a7791_init_early,
 	.init_time	= rcar_gen2_timer_init,
 	.dt_compat	= r8a7791_boards_compat_dt,

arch/arm/mach-shmobile/smp-r8a7791.c

+/*
+ * SMP support for r8a7791
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+#include <asm/smp_plat.h>
+#include <mach/common.h>
+#include <mach/r8a7791.h>
+
+#define RST		0xe6160000
+#define CA15BAR		0x0020
+#define CA15RESCNT	0x0040
+#define RAM		0xe6300000
+
+static void __init r8a7791_smp_prepare_cpus(unsigned int max_cpus)
+{
+	void __iomem *p;
+	u32 bar;
+
+	/* let APMU code install data related to shmobile_boot_vector */
+	shmobile_smp_apmu_prepare_cpus(max_cpus);
+
+	/* RAM for jump stub, because BAR requires 256KB aligned address */
+	p = ioremap_nocache(RAM, shmobile_boot_size);
+	memcpy_toio(p, shmobile_boot_vector, shmobile_boot_size);
+	iounmap(p);
+
+	/* setup reset vectors */
+	p = ioremap_nocache(RST, 0x63);
+	bar = (RAM >> 8) & 0xfffffc00;
+	writel_relaxed(bar, p + CA15BAR);
+	writel_relaxed(bar | 0x10, p + CA15BAR);
+
+	/* enable clocks to all CPUs */
+	writel_relaxed((readl_relaxed(p + CA15RESCNT) & ~0x0f) | 0xa5a50000,
+		       p + CA15RESCNT);
+	iounmap(p);
+}
+
+struct smp_operations r8a7791_smp_ops __initdata = {
+	.smp_prepare_cpus	= r8a7791_smp_prepare_cpus,
+	.smp_boot_secondary	= shmobile_smp_apmu_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_disable		= shmobile_smp_cpu_disable,
+	.cpu_die		= shmobile_smp_apmu_cpu_die,
+	.cpu_kill		= shmobile_smp_apmu_cpu_kill,
+#endif
+};