Merge tag 'staging-5.8-rc6' of...

Merge tag 'staging-5.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging into master

Pull IIO and staging driver fixes from Greg KH:
 "Here are some IIO and staging driver fixes for 5.8-rc6.

  The majority of fixes are for IIO drivers, resolving a number of small
  reported issues, and there are some counter fixes in here too that
  were tied to the IIO fixes. There's only one staging driver fix here,
  a comedi fix found by code inspection.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'staging-5.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: comedi: verify array index is correct before using it
  iio: adc: ad7780: Fix a resource handling path in 'ad7780_probe()'
  iio:pressure:ms5611 Fix buffer element alignment
  iio:humidity:hts221 Fix alignment and data leak issues
  iio:humidity:hdc100x Fix alignment and data leak issues
  iio:magnetometer:ak8974: Fix alignment and data leak issues
  iio: adc: adi-axi-adc: Fix object reference counting
  iio: pressure: zpa2326: handle pm_runtime_get_sync failure
  counter: 104-quad-8: Add lock guards - filter clock prescaler
  counter: 104-quad-8: Add lock guards - differential encoder
  iio: core: add missing IIO_MOD_H2/ETHANOL string identifiers
  iio: magnetometer: ak8974: Fix runtime PM imbalance on error
  iio: mma8452: Add missed iio_device_unregister() call in mma8452_probe()
  iio:health:afe4404 Fix timestamp alignment and prevent data leak.
  iio:health:afe4403 Fix timestamp alignment and prevent data leak.

drivers/counter/104-quad-8.c

@@ -1274,18 +1274,26 @@ static ssize_t quad8_signal_cable_fault_read(struct counter_device *counter,
 					     struct counter_signal *signal,
 					     void *private, char *buf)
 {
-	const struct quad8_iio *const priv = counter->priv;
+	struct quad8_iio *const priv = counter->priv;
 	const size_t channel_id = signal->id / 2;
-	const bool disabled = !(priv->cable_fault_enable & BIT(channel_id));
+	bool disabled;
 	unsigned int status;
 	unsigned int fault;
 
-	if (disabled)
+	mutex_lock(&priv->lock);
+
+	disabled = !(priv->cable_fault_enable & BIT(channel_id));
+
+	if (disabled) {
+		mutex_unlock(&priv->lock);
 		return -EINVAL;
+	}
 
 	/* Logic 0 = cable fault */
 	status = inb(priv->base + QUAD8_DIFF_ENCODER_CABLE_STATUS);
 
+	mutex_unlock(&priv->lock);
+
 	/* Mask respective channel and invert logic */
 	fault = !(status & BIT(channel_id));
 
@@ -1317,6 +1325,8 @@ static ssize_t quad8_signal_cable_fault_enable_write(
 	if (ret)
 		return ret;
 
+	mutex_lock(&priv->lock);
+
 	if (enable)
 		priv->cable_fault_enable |= BIT(channel_id);
 	else
@@ -1327,6 +1337,8 @@ static ssize_t quad8_signal_cable_fault_enable_write(
 
 	outb(cable_fault_enable, priv->base + QUAD8_DIFF_ENCODER_CABLE_STATUS);
 
+	mutex_unlock(&priv->lock);
+
 	return len;
 }
 
@@ -1353,6 +1365,8 @@ static ssize_t quad8_signal_fck_prescaler_write(struct counter_device *counter,
 	if (ret)
 		return ret;
 
+	mutex_lock(&priv->lock);
+
 	priv->fck_prescaler[channel_id] = prescaler;
 
 	/* Reset Byte Pointer */
@@ -1363,6 +1377,8 @@ static ssize_t quad8_signal_fck_prescaler_write(struct counter_device *counter,
 	outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP | QUAD8_RLD_PRESET_PSC,
 	     base_offset + 1);
 
+	mutex_unlock(&priv->lock);
+
 	return len;
 }
 

drivers/iio/accel/mma8452.c

@@ -1685,10 +1685,13 @@ static int mma8452_probe(struct i2c_client *client,
 
 	ret = mma8452_set_freefall_mode(data, false);
 	if (ret < 0)
-		goto buffer_cleanup;
+		goto unregister_device;
 
 	return 0;
 
+unregister_device:
+	iio_device_unregister(indio_dev);
+
 buffer_cleanup:
 	iio_triggered_buffer_cleanup(indio_dev);
 

drivers/iio/adc/ad7780.c

@@ -329,7 +329,7 @@ static int ad7780_probe(struct spi_device *spi)
 
 	ret = ad7780_init_gpios(&spi->dev, st);
 	if (ret)
-		goto error_cleanup_buffer_and_trigger;
+		return ret;
 
 	st->reg = devm_regulator_get(&spi->dev, "avdd");
 	if (IS_ERR(st->reg))

drivers/iio/adc/adi-axi-adc.c

@@ -332,12 +332,12 @@ static struct adi_axi_adc_client *adi_axi_adc_attach_client(struct device *dev)
 		if (cl->dev->of_node != cln)
 			continue;
 
-		if (!try_module_get(dev->driver->owner)) {
+		if (!try_module_get(cl->dev->driver->owner)) {
 			mutex_unlock(&registered_clients_lock);
 			return ERR_PTR(-ENODEV);
 		}
 
-		get_device(dev);
+		get_device(cl->dev);
 		cl->info = info;
 		mutex_unlock(&registered_clients_lock);
 		return cl;

drivers/iio/health/afe4403.c

@@ -65,6 +65,7 @@ static const struct reg_field afe4403_reg_fields[] = {
  * @regulator: Pointer to the regulator for the IC
  * @trig: IIO trigger for this device
  * @irq: ADC_RDY line interrupt number
+ * @buffer: Used to construct data layout to push into IIO buffer.
  */
 struct afe4403_data {
 	struct device *dev;
@@ -74,6 +75,8 @@ struct afe4403_data {
 	struct regulator *regulator;
 	struct iio_trigger *trig;
 	int irq;
+	/* Ensure suitable alignment for timestamp */
+	s32 buffer[8] __aligned(8);
 };
 
 enum afe4403_chan_id {
@@ -309,7 +312,6 @@ static irqreturn_t afe4403_trigger_handler(int irq, void *private)
 	struct iio_dev *indio_dev = pf->indio_dev;
 	struct afe4403_data *afe = iio_priv(indio_dev);
 	int ret, bit, i = 0;
-	s32 buffer[8];
 	u8 tx[4] = {AFE440X_CONTROL0, 0x0, 0x0, AFE440X_CONTROL0_READ};
 	u8 rx[3];
 
@@ -326,7 +328,7 @@ static irqreturn_t afe4403_trigger_handler(int irq, void *private)
 		if (ret)
 			goto err;
 
-		buffer[i++] = get_unaligned_be24(&rx[0]);
+		afe->buffer[i++] = get_unaligned_be24(&rx[0]);
 	}
 
 	/* Disable reading from the device */
@@ -335,7 +337,8 @@ static irqreturn_t afe4403_trigger_handler(int irq, void *private)
 	if (ret)
 		goto err;
 
-	iio_push_to_buffers_with_timestamp(indio_dev, buffer, pf->timestamp);
+	iio_push_to_buffers_with_timestamp(indio_dev, afe->buffer,
+					   pf->timestamp);
 err:
 	iio_trigger_notify_done(indio_dev->trig);
 

drivers/iio/health/afe4404.c

@@ -83,6 +83,7 @@ static const struct reg_field afe4404_reg_fields[] = {
  * @regulator: Pointer to the regulator for the IC
  * @trig: IIO trigger for this device
  * @irq: ADC_RDY line interrupt number
+ * @buffer: Used to construct a scan to push to the iio buffer.
  */
 struct afe4404_data {
 	struct device *dev;
@@ -91,6 +92,7 @@ struct afe4404_data {
 	struct regulator *regulator;
 	struct iio_trigger *trig;
 	int irq;
+	s32 buffer[10] __aligned(8);
 };
 
 enum afe4404_chan_id {
@@ -328,17 +330,17 @@ static irqreturn_t afe4404_trigger_handler(int irq, void *private)
 	struct iio_dev *indio_dev = pf->indio_dev;
 	struct afe4404_data *afe = iio_priv(indio_dev);
 	int ret, bit, i = 0;
-	s32 buffer[10];
 
 	for_each_set_bit(bit, indio_dev->active_scan_mask,
 			 indio_dev->masklength) {
 		ret = regmap_read(afe->regmap, afe4404_channel_values[bit],
-				  &buffer[i++]);
+				  &afe->buffer[i++]);
 		if (ret)
 			goto err;
 	}
 
-	iio_push_to_buffers_with_timestamp(indio_dev, buffer, pf->timestamp);
+	iio_push_to_buffers_with_timestamp(indio_dev, afe->buffer,
+					   pf->timestamp);
 err:
 	iio_trigger_notify_done(indio_dev->trig);
 

drivers/iio/humidity/hdc100x.c

@@ -38,6 +38,11 @@ struct hdc100x_data {
 
 	/* integration time of the sensor */
 	int adc_int_us[2];
+	/* Ensure natural alignment of timestamp */
+	struct {
+		__be16 channels[2];
+		s64 ts __aligned(8);
+	} scan;
 };
 
 /* integration time in us */
@@ -322,7 +327,6 @@ static irqreturn_t hdc100x_trigger_handler(int irq, void *p)
 	struct i2c_client *client = data->client;
 	int delay = data->adc_int_us[0] + data->adc_int_us[1];
 	int ret;
-	s16 buf[8];  /* 2x s16 + padding + 8 byte timestamp */
 
 	/* dual read starts at temp register */
 	mutex_lock(&data->lock);
@@ -333,13 +337,13 @@ static irqreturn_t hdc100x_trigger_handler(int irq, void *p)
 	}
 	usleep_range(delay, delay + 1000);
 
-	ret = i2c_master_recv(client, (u8 *)buf, 4);
+	ret = i2c_master_recv(client, (u8 *)data->scan.channels, 4);
 	if (ret < 0) {
 		dev_err(&client->dev, "cannot read sensor data\n");
 		goto err;
 	}
 
-	iio_push_to_buffers_with_timestamp(indio_dev, buf,
+	iio_push_to_buffers_with_timestamp(indio_dev, &data->scan,
 					   iio_get_time_ns(indio_dev));
 err:
 	mutex_unlock(&data->lock);

drivers/iio/humidity/hts221.h

@@ -14,8 +14,6 @@
 
 #include <linux/iio/iio.h>
 
-#define HTS221_DATA_SIZE	2
-
 enum hts221_sensor_type {
 	HTS221_SENSOR_H,
 	HTS221_SENSOR_T,
@@ -39,6 +37,11 @@ struct hts221_hw {
 
 	bool enabled;
 	u8 odr;
+	/* Ensure natural alignment of timestamp */
+	struct {
+		__le16 channels[2];
+		s64 ts __aligned(8);
+	} scan;
 };
 
 extern const struct dev_pm_ops hts221_pm_ops;

drivers/iio/humidity/hts221_buffer.c

@@ -160,7 +160,6 @@ static const struct iio_buffer_setup_ops hts221_buffer_ops = {
 
 static irqreturn_t hts221_buffer_handler_thread(int irq, void *p)
 {
-	u8 buffer[ALIGN(2 * HTS221_DATA_SIZE, sizeof(s64)) + sizeof(s64)];
 	struct iio_poll_func *pf = p;
 	struct iio_dev *iio_dev = pf->indio_dev;
 	struct hts221_hw *hw = iio_priv(iio_dev);
@@ -170,18 +169,20 @@ static irqreturn_t hts221_buffer_handler_thread(int irq, void *p)
 	/* humidity data */
 	ch = &iio_dev->channels[HTS221_SENSOR_H];
 	err = regmap_bulk_read(hw->regmap, ch->address,
-			       buffer, HTS221_DATA_SIZE);
+			       &hw->scan.channels[0],
+			       sizeof(hw->scan.channels[0]));
 	if (err < 0)
 		goto out;
 
 	/* temperature data */
 	ch = &iio_dev->channels[HTS221_SENSOR_T];
 	err = regmap_bulk_read(hw->regmap, ch->address,
-			       buffer + HTS221_DATA_SIZE, HTS221_DATA_SIZE);
+			       &hw->scan.channels[1],
+			       sizeof(hw->scan.channels[1]));
 	if (err < 0)
 		goto out;
 
-	iio_push_to_buffers_with_timestamp(iio_dev, buffer,
+	iio_push_to_buffers_with_timestamp(iio_dev, &hw->scan,
 					   iio_get_time_ns(iio_dev));
 
 out:

drivers/iio/industrialio-core.c

@@ -130,6 +130,8 @@ static const char * const iio_modifier_names[] = {
 	[IIO_MOD_PM2P5] = "pm2p5",
 	[IIO_MOD_PM4] = "pm4",
 	[IIO_MOD_PM10] = "pm10",
+	[IIO_MOD_ETHANOL] = "ethanol",
+	[IIO_MOD_H2] = "h2",
 };
 
 /* relies on pairs of these shared then separate */

drivers/iio/magnetometer/ak8974.c

@@ -192,6 +192,11 @@ struct ak8974 {
 	bool drdy_irq;
 	struct completion drdy_complete;
 	bool drdy_active_low;
+	/* Ensure timestamp is naturally aligned */
+	struct {
+		__le16 channels[3];
+		s64 ts __aligned(8);
+	} scan;
 };
 
 static const char ak8974_reg_avdd[] = "avdd";
@@ -657,7 +662,6 @@ static void ak8974_fill_buffer(struct iio_dev *indio_dev)
 {
 	struct ak8974 *ak8974 = iio_priv(indio_dev);
 	int ret;
-	__le16 hw_values[8]; /* Three axes + 64bit padding */
 
 	pm_runtime_get_sync(&ak8974->i2c->dev);
 	mutex_lock(&ak8974->lock);
@@ -667,13 +671,13 @@ static void ak8974_fill_buffer(struct iio_dev *indio_dev)
 		dev_err(&ak8974->i2c->dev, "error triggering measure\n");
 		goto out_unlock;
 	}
-	ret = ak8974_getresult(ak8974, hw_values);
+	ret = ak8974_getresult(ak8974, ak8974->scan.channels);
 	if (ret) {
 		dev_err(&ak8974->i2c->dev, "error getting measures\n");
 		goto out_unlock;
 	}
 
-	iio_push_to_buffers_with_timestamp(indio_dev, hw_values,
+	iio_push_to_buffers_with_timestamp(indio_dev, &ak8974->scan,
 					   iio_get_time_ns(indio_dev));
 
  out_unlock:
@@ -862,19 +866,21 @@ static int ak8974_probe(struct i2c_client *i2c,
 	ak8974->map = devm_regmap_init_i2c(i2c, &ak8974_regmap_config);
 	if (IS_ERR(ak8974->map)) {
 		dev_err(&i2c->dev, "failed to allocate register map\n");
+		pm_runtime_put_noidle(&i2c->dev);
+		pm_runtime_disable(&i2c->dev);
 		return PTR_ERR(ak8974->map);
 	}
 
 	ret = ak8974_set_power(ak8974, AK8974_PWR_ON);
 	if (ret) {
 		dev_err(&i2c->dev, "could not power on\n");
-		goto power_off;
+		goto disable_pm;
 	}
 
 	ret = ak8974_detect(ak8974);
 	if (ret) {
 		dev_err(&i2c->dev, "neither AK8974 nor AMI30x found\n");
-		goto power_off;
+		goto disable_pm;
 	}
 
 	ret = ak8974_selftest(ak8974);
@@ -884,14 +890,9 @@ static int ak8974_probe(struct i2c_client *i2c,
 	ret = ak8974_reset(ak8974);
 	if (ret) {
 		dev_err(&i2c->dev, "AK8974 reset failed\n");
-		goto power_off;
+		goto disable_pm;
 	}
 
-	pm_runtime_set_autosuspend_delay(&i2c->dev,
-					 AK8974_AUTOSUSPEND_DELAY);
-	pm_runtime_use_autosuspend(&i2c->dev);
-	pm_runtime_put(&i2c->dev);
-
 	indio_dev->dev.parent = &i2c->dev;
 	switch (ak8974->variant) {
 	case AK8974_WHOAMI_VALUE_AMI306:
@@ -957,6 +958,11 @@ static int ak8974_probe(struct i2c_client *i2c,
 		goto cleanup_buffer;
 	}
 
+	pm_runtime_set_autosuspend_delay(&i2c->dev,
+					 AK8974_AUTOSUSPEND_DELAY);
+	pm_runtime_use_autosuspend(&i2c->dev);
+	pm_runtime_put(&i2c->dev);
+
 	return 0;
 
 cleanup_buffer:
@@ -965,7 +971,6 @@ static int ak8974_probe(struct i2c_client *i2c,
 	pm_runtime_put_noidle(&i2c->dev);
 	pm_runtime_disable(&i2c->dev);
 	ak8974_set_power(ak8974, AK8974_PWR_OFF);
-power_off:
 	regulator_bulk_disable(ARRAY_SIZE(ak8974->regs), ak8974->regs);
 
 	return ret;

drivers/iio/pressure/ms5611_core.c

@@ -212,16 +212,21 @@ static irqreturn_t ms5611_trigger_handler(int irq, void *p)
 	struct iio_poll_func *pf = p;
 	struct iio_dev *indio_dev = pf->indio_dev;
 	struct ms5611_state *st = iio_priv(indio_dev);
-	s32 buf[4]; /* s32 (pressure) + s32 (temp) + 2 * s32 (timestamp) */
+	/* Ensure buffer elements are naturally aligned */
+	struct {
+		s32 channels[2];
+		s64 ts __aligned(8);
+	} scan;
 	int ret;
 
 	mutex_lock(&st->lock);
-	ret = ms5611_read_temp_and_pressure(indio_dev, &buf[1], &buf[0]);
+	ret = ms5611_read_temp_and_pressure(indio_dev, &scan.channels[1],
+					    &scan.channels[0]);
 	mutex_unlock(&st->lock);
 	if (ret < 0)
 		goto err;
 
-	iio_push_to_buffers_with_timestamp(indio_dev, buf,
+	iio_push_to_buffers_with_timestamp(indio_dev, &scan,
 					   iio_get_time_ns(indio_dev));
 
 err:

drivers/iio/pressure/zpa2326.c

@@ -665,8 +665,10 @@ static int zpa2326_resume(const struct iio_dev *indio_dev)
 	int err;
 
 	err = pm_runtime_get_sync(indio_dev->dev.parent);
-	if (err < 0)
+	if (err < 0) {
+		pm_runtime_put(indio_dev->dev.parent);
 		return err;
+	}
 
 	if (err > 0) {
 		/*

drivers/staging/comedi/drivers/addi_apci_1500.c

@@ -456,9 +456,9 @@ static int apci1500_di_cfg_trig(struct comedi_device *dev,
 	unsigned int lo_mask = data[5] << shift;
 	unsigned int chan_mask = hi_mask | lo_mask;
 	unsigned int old_mask = (1 << shift) - 1;
-	unsigned int pm = devpriv->pm[trig] & old_mask;
-	unsigned int pt = devpriv->pt[trig] & old_mask;
-	unsigned int pp = devpriv->pp[trig] & old_mask;
+	unsigned int pm;
+	unsigned int pt;
+	unsigned int pp;
 
 	if (trig > 1) {
 		dev_dbg(dev->class_dev,
@@ -471,6 +471,10 @@ static int apci1500_di_cfg_trig(struct comedi_device *dev,
 		return -EINVAL;
 	}
 
+	pm = devpriv->pm[trig] & old_mask;
+	pt = devpriv->pt[trig] & old_mask;
+	pp = devpriv->pp[trig] & old_mask;
+
 	switch (data[2]) {
 	case COMEDI_DIGITAL_TRIG_DISABLE:
 		/* clear trigger configuration */