Commit 6a55e5aa authored by David Mosberger's avatar David Mosberger

Merge tiger.hpl.hp.com:/data1/bk/vanilla/linux-2.5

into tiger.hpl.hp.com:/data1/bk/lia64/to-linus-2.5
parents 498b9cb8 15a0c0ef
......@@ -701,7 +701,7 @@ GLOBAL_ENTRY(ia64_leave_kernel)
* NOTE: alloc, loadrs, and cover can't be predicated.
*/
(pNonSys) br.cond.dpnt dont_preserve_current_frame
cover // add current frame into dirty partition
cover // add current frame into dirty partition and set cr.ifs
;;
mov r19=ar.bsp // get new backing store pointer
sub r16=r16,r18 // krbs = old bsp - size of dirty partition
......@@ -727,7 +727,7 @@ dont_preserve_current_frame:
# define Nregs 14
#endif
alloc loc0=ar.pfs,2,Nregs-2,2,0
shr.u loc1=r18,9 // RNaTslots <= dirtySize / (64*8) + 1
shr.u loc1=r18,9 // RNaTslots <= floor(dirtySize / (64*8))
sub r17=r17,r18 // r17 = (physStackedSize + 8) - dirtySize
;;
mov ar.rsc=r19 // load ar.rsc to be used for "loadrs"
......@@ -774,13 +774,13 @@ rse_clear_invalid:
;;
mov loc3=0
mov loc4=0
mov loc9=0
mov loc5=0
mov loc6=0
mov loc7=0
(pRecurse) br.call.sptk.many b6=rse_clear_invalid
;;
mov loc7=0
mov loc8=0
mov loc9=0
cmp.ne pReturn,p0=r0,in1 // if recursion count != 0, we need to do a br.ret
mov loc10=0
mov loc11=0
......@@ -904,13 +904,14 @@ ENTRY(notify_resume_user)
mov r9=ar.unat
mov loc0=rp // save return address
mov out0=0 // there is no "oldset"
adds out1=0,sp // out1=&sigscratch
adds out1=8,sp // out1=&sigscratch->ar_pfs
(pSys) mov out2=1 // out2==1 => we're in a syscall
;;
(pNonSys) mov out2=0 // out2==0 => not a syscall
.fframe 16
.spillpsp ar.unat, 16 // (note that offset is relative to psp+0x10!)
st8 [sp]=r9,-16 // allocate space for ar.unat and save it
st8 [out1]=loc1,-8 // save ar.pfs, out1=&sigscratch
.body
br.call.sptk.many rp=do_notify_resume_user
.ret15: .restore sp
......@@ -931,11 +932,12 @@ GLOBAL_ENTRY(sys_rt_sigsuspend)
mov loc0=rp // save return address
mov out0=in0 // mask
mov out1=in1 // sigsetsize
adds out2=0,sp // out2=&sigscratch
adds out2=8,sp // out2=&sigscratch->ar_pfs
;;
.fframe 16
.spillpsp ar.unat, 16 // (note that offset is relative to psp+0x10!)
st8 [sp]=r9,-16 // allocate space for ar.unat and save it
st8 [out2]=loc1,-8 // save ar.pfs, out2=&sigscratch
.body
br.call.sptk.many rp=ia64_rt_sigsuspend
.ret17: .restore sp
......
......@@ -145,11 +145,12 @@ END(fsys_fallback_syscall)
*/
#define SIGTRAMP_SAVES \
.unwabi @svr4, 's' // mark this as a sigtramp handler (saves scratch regs) \
.savesp ar.unat, UNAT_OFF+SIGCONTEXT_OFF \
.savesp ar.fpsr, FPSR_OFF+SIGCONTEXT_OFF \
.savesp pr, PR_OFF+SIGCONTEXT_OFF \
.savesp rp, RP_OFF+SIGCONTEXT_OFF \
.unwabi @svr4, 's'; /* mark this as a sigtramp handler (saves scratch regs) */ \
.savesp ar.unat, UNAT_OFF+SIGCONTEXT_OFF; \
.savesp ar.fpsr, FPSR_OFF+SIGCONTEXT_OFF; \
.savesp pr, PR_OFF+SIGCONTEXT_OFF; \
.savesp rp, RP_OFF+SIGCONTEXT_OFF; \
.savesp ar.pfs, CFM_OFF+SIGCONTEXT_OFF; \
.vframesp SP_OFF+SIGCONTEXT_OFF
GLOBAL_ENTRY(ia64_sigtramp)
......@@ -173,9 +174,7 @@ GLOBAL_ENTRY(ia64_sigtramp)
.spillsp.p p8, ar.rnat, RNAT_OFF+SIGCONTEXT_OFF
(p8) br.cond.spnt setup_rbs // yup -> (clobbers r14, r15, and r16)
back_from_setup_rbs:
.spillreg ar.pfs, r8
alloc r8=ar.pfs,0,0,3,0 // get CFM0, EC0, and CPL0 into r8
alloc r8=ar.pfs,0,0,3,0
ld8 out0=[base0],16 // load arg0 (signum)
adds base1=(ARG1_OFF-(RBS_BASE_OFF+SIGCONTEXT_OFF)),base1
;;
......@@ -184,17 +183,12 @@ back_from_setup_rbs:
;;
ld8 out2=[base0] // load arg2 (sigcontextp)
ld8 gp=[r17] // get signal handler's global pointer
adds base0=(BSP_OFF+SIGCONTEXT_OFF),sp
;;
.spillsp ar.bsp, BSP_OFF+SIGCONTEXT_OFF
st8 [base0]=r9,(CFM_OFF-BSP_OFF) // save sc_ar_bsp
dep r8=0,r8,38,26 // clear EC0, CPL0 and reserved bits
adds base1=(FR6_OFF+16+SIGCONTEXT_OFF),sp
;;
.spillsp ar.pfs, CFM_OFF+SIGCONTEXT_OFF
st8 [base0]=r8 // save CFM0
st8 [base0]=r9 // save sc_ar_bsp
adds base0=(FR6_OFF+SIGCONTEXT_OFF),sp
adds base1=(FR6_OFF+16+SIGCONTEXT_OFF),sp
;;
stf.spill [base0]=f6,32
stf.spill [base1]=f7,32
......@@ -217,7 +211,6 @@ back_from_setup_rbs:
ld8 r15=[base0],(CFM_OFF-BSP_OFF) // fetch sc_ar_bsp and advance to CFM_OFF
mov r14=ar.bsp
;;
ld8 r8=[base0] // restore (perhaps modified) CFM0, EC0, and CPL0
cmp.ne p8,p0=r14,r15 // do we need to restore the rbs?
(p8) br.cond.spnt restore_rbs // yup -> (clobbers r14-r18, f6 & f7)
;;
......
struct sigscratch {
unsigned long scratch_unat; /* ar.unat for the general registers saved in pt */
unsigned long pad;
unsigned long ar_pfs; /* for syscalls, the user-level function-state */
struct pt_regs pt;
};
......
......@@ -315,7 +315,7 @@ ia64_rt_sigreturn (struct sigscratch *scr)
static long
setup_sigcontext (struct sigcontext *sc, sigset_t *mask, struct sigscratch *scr)
{
unsigned long flags = 0, ifs, nat;
unsigned long flags = 0, ifs, cfm, nat;
long err;
ifs = scr->pt.cr_ifs;
......@@ -325,7 +325,9 @@ setup_sigcontext (struct sigcontext *sc, sigset_t *mask, struct sigscratch *scr)
if ((ifs & (1UL << 63)) == 0) {
/* if cr_ifs isn't valid, we got here through a syscall */
flags |= IA64_SC_FLAG_IN_SYSCALL;
}
cfm = scr->ar_pfs & ((1UL << 38) - 1);
} else
cfm = ifs & ((1UL << 38) - 1);
ia64_flush_fph(current);
if ((current->thread.flags & IA64_THREAD_FPH_VALID)) {
flags |= IA64_SC_FLAG_FPH_VALID;
......@@ -344,6 +346,7 @@ setup_sigcontext (struct sigcontext *sc, sigset_t *mask, struct sigscratch *scr)
err |= __put_user(nat, &sc->sc_nat);
err |= PUT_SIGSET(mask, &sc->sc_mask);
err |= __put_user(cfm, &sc->sc_cfm);
err |= __put_user(scr->pt.cr_ipsr & IA64_PSR_UM, &sc->sc_um);
err |= __put_user(scr->pt.ar_rsc, &sc->sc_ar_rsc);
err |= __put_user(scr->pt.ar_ccv, &sc->sc_ar_ccv);
......@@ -422,6 +425,15 @@ setup_frame (int sig, struct k_sigaction *ka, siginfo_t *info, sigset_t *set,
scr->pt.ar_fpsr = FPSR_DEFAULT; /* reset fpsr for signal handler */
scr->pt.cr_iip = tramp_addr;
ia64_psr(&scr->pt)->ri = 0; /* start executing in first slot */
/*
* Force the interruption function mask to zero. This has no effect when a
* system-call got interrupted by a signal (since, in that case, scr->pt_cr_ifs is
* ignored), but it has the desirable effect of making it possible to deliver a
* signal with an incomplete register frame (which happens when a mandatory RSE
* load faults). Furthermore, it has no negative effect on the getting the user's
* dirty partition preserved, because that's governed by scr->pt.loadrs.
*/
scr->pt.cr_ifs = (1UL << 63);
/*
* Note: this affects only the NaT bits of the scratch regs (the ones saved in
......
......@@ -10,7 +10,7 @@
* gets translated into an assembly file which, in turn, is processed
* by awk to generate offsets.h. So if you make any changes to this
* file, be sure to verify that the awk procedure still works (see
* prin_offsets.awk).
* print_offsets.awk).
*/
#include <linux/config.h>
......
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment