MIPS: Add HARDWARE_WATCHPOINTS definitions and support code.

This is the main support code for the patch.  Here we just add the
code, the following patches hook it up.
Signed-off-by: David Daney <ddaney@avtrex.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

 create mode 100644 arch/mips/include/asm/watch.h
 create mode 100644 arch/mips/kernel/watch.c

arch/mips/include/asm/cpu-info.h

@@ -12,6 +12,8 @@
 #ifndef __ASM_CPU_INFO_H
 #define __ASM_CPU_INFO_H
 
+#include <linux/types.h>
+
 #include <asm/cache.h>
 
 /*
@@ -69,6 +71,10 @@ struct cpuinfo_mips {
 	int			tc_id;   /* Thread Context number */
 #endif
 	void 			*data;	/* Additional data */
+	unsigned int		watch_reg_count;   /* Number that exist */
+	unsigned int		watch_reg_use_cnt; /* Usable by ptrace */
+#define NUM_WATCH_REGS 4
+	u16			watch_reg_masks[NUM_WATCH_REGS];
 } __attribute__((aligned(SMP_CACHE_BYTES)));
 
 extern struct cpuinfo_mips cpu_data[];

arch/mips/include/asm/processor.h

@@ -105,6 +105,19 @@ struct mips_dsp_state {
 	{0,} \
 }
 
+struct mips3264_watch_reg_state {
+	/* The width of watchlo is 32 in a 32 bit kernel and 64 in a
+	   64 bit kernel.  We use unsigned long as it has the same
+	   property. */
+	unsigned long watchlo[NUM_WATCH_REGS];
+	/* Only the mask and IRW bits from watchhi. */
+	u16 watchhi[NUM_WATCH_REGS];
+};
+
+union mips_watch_reg_state {
+	struct mips3264_watch_reg_state mips3264;
+};
+
 typedef struct {
 	unsigned long seg;
 } mm_segment_t;
@@ -137,6 +150,9 @@ struct thread_struct {
 	/* Saved state of the DSP ASE, if available. */
 	struct mips_dsp_state dsp;
 
+	/* Saved watch register state, if available. */
+	union mips_watch_reg_state watch;
+
 	/* Other stuff associated with the thread. */
 	unsigned long cp0_badvaddr;	/* Last user fault */
 	unsigned long cp0_baduaddr;	/* Last kernel fault accessing USEG */
@@ -192,6 +208,10 @@ struct thread_struct {
 		.dspr		= {0, },			\
 		.dspcontrol	= 0,				\
 	},							\
+	/*							\
+	 * saved watch register stuff				\
+	 */							\
+	.watch = {{{0,},},},					\
 	/*							\
 	 * Other stuff associated with the process		\
 	 */							\

arch/mips/include/asm/thread_info.h

@@ -124,6 +124,7 @@ register struct thread_info *__current_thread_info __asm__("$28");
 #define TIF_32BIT_REGS		22	/* also implies 16/32 fprs */
 #define TIF_32BIT_ADDR		23	/* 32-bit address space (o32/n32) */
 #define TIF_FPUBOUND		24	/* thread bound to FPU-full CPU set */
+#define TIF_LOAD_WATCH		25	/* If set, load watch registers */
 #define TIF_SYSCALL_TRACE	31	/* syscall trace active */
 
 #define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
@@ -140,6 +141,7 @@ register struct thread_info *__current_thread_info __asm__("$28");
 #define _TIF_32BIT_REGS		(1<<TIF_32BIT_REGS)
 #define _TIF_32BIT_ADDR		(1<<TIF_32BIT_ADDR)
 #define _TIF_FPUBOUND		(1<<TIF_FPUBOUND)
+#define _TIF_LOAD_WATCH		(1<<TIF_LOAD_WATCH)
 
 /* work to do on interrupt/exception return */
 #define _TIF_WORK_MASK		(0x0000ffef & ~_TIF_SECCOMP)

arch/mips/include/asm/watch.h

+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 David Daney
+ */
+#ifndef _ASM_WATCH_H
+#define _ASM_WATCH_H
+
+#include <linux/bitops.h>
+
+#include <asm/mipsregs.h>
+
+void mips_install_watch_registers(void);
+void mips_read_watch_registers(void);
+void mips_clear_watch_registers(void);
+void mips_probe_watch_registers(struct cpuinfo_mips *c);
+
+#ifdef CONFIG_HARDWARE_WATCHPOINTS
+#define __restore_watch() do {						\
+	if (unlikely(test_bit(TIF_LOAD_WATCH,				\
+			      &current_thread_info()->flags))) {	\
+		mips_install_watch_registers();				\
+	}								\
+} while (0)
+
+#else
+#define __restore_watch() do {} while (0)
+#endif
+
+#endif /* _ASM_WATCH_H */

arch/mips/kernel/Makefile

@@ -6,7 +6,7 @@ extra-y		:= head.o init_task.o vmlinux.lds
 
 obj-y		+= cpu-probe.o branch.o entry.o genex.o irq.o process.o \
 		   ptrace.o reset.o setup.o signal.o syscall.o \
-		   time.o topology.o traps.o unaligned.o
+		   time.o topology.o traps.o unaligned.o watch.o
 
 obj-$(CONFIG_CEVT_BCM1480)	+= cevt-bcm1480.o
 obj-$(CONFIG_CEVT_R4K)		+= cevt-r4k.o

arch/mips/kernel/watch.c

+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 David Daney
+ */
+
+#include <linux/sched.h>
+
+#include <asm/processor.h>
+#include <asm/watch.h>
+
+/*
+ * Install the watch registers for the current thread.  A maximum of
+ * four registers are installed although the machine may have more.
+ */
+void mips_install_watch_registers(void)
+{
+	struct mips3264_watch_reg_state *watches =
+		&current->thread.watch.mips3264;
+	switch (current_cpu_data.watch_reg_use_cnt) {
+	default:
+		BUG();
+	case 4:
+		write_c0_watchlo3(watches->watchlo[3]);
+		/* Write 1 to the I, R, and W bits to clear them, and
+		   1 to G so all ASIDs are trapped. */
+		write_c0_watchhi3(0x40000007 | watches->watchhi[3]);
+	case 3:
+		write_c0_watchlo2(watches->watchlo[2]);
+		write_c0_watchhi2(0x40000007 | watches->watchhi[2]);
+	case 2:
+		write_c0_watchlo1(watches->watchlo[1]);
+		write_c0_watchhi1(0x40000007 | watches->watchhi[1]);
+	case 1:
+		write_c0_watchlo0(watches->watchlo[0]);
+		write_c0_watchhi0(0x40000007 | watches->watchhi[0]);
+	}
+}
+
+/*
+ * Read back the watchhi registers so the user space debugger has
+ * access to the I, R, and W bits.  A maximum of four registers are
+ * read although the machine may have more.
+ */
+void mips_read_watch_registers(void)
+{
+	struct mips3264_watch_reg_state *watches =
+		&current->thread.watch.mips3264;
+	switch (current_cpu_data.watch_reg_use_cnt) {
+	default:
+		BUG();
+	case 4:
+		watches->watchhi[3] = (read_c0_watchhi3() & 0x0fff);
+	case 3:
+		watches->watchhi[2] = (read_c0_watchhi2() & 0x0fff);
+	case 2:
+		watches->watchhi[1] = (read_c0_watchhi1() & 0x0fff);
+	case 1:
+		watches->watchhi[0] = (read_c0_watchhi0() & 0x0fff);
+	}
+	if (current_cpu_data.watch_reg_use_cnt == 1 &&
+	    (watches->watchhi[0] & 7) == 0) {
+		/* Pathological case of release 1 architecture that
+		 * doesn't set the condition bits.  We assume that
+		 * since we got here, the watch condition was met and
+		 * signal that the conditions requested in watchlo
+		 * were met.  */
+		watches->watchhi[0] |= (watches->watchlo[0] & 7);
+	}
+ }
+
+/*
+ * Disable all watch registers.  Although only four registers are
+ * installed, all are cleared to eliminate the possibility of endless
+ * looping in the watch handler.
+ */
+void mips_clear_watch_registers(void)
+{
+	switch (current_cpu_data.watch_reg_count) {
+	default:
+		BUG();
+	case 8:
+		write_c0_watchlo7(0);
+	case 7:
+		write_c0_watchlo6(0);
+	case 6:
+		write_c0_watchlo5(0);
+	case 5:
+		write_c0_watchlo4(0);
+	case 4:
+		write_c0_watchlo3(0);
+	case 3:
+		write_c0_watchlo2(0);
+	case 2:
+		write_c0_watchlo1(0);
+	case 1:
+		write_c0_watchlo0(0);
+	}
+}
+
+__cpuinit void mips_probe_watch_registers(struct cpuinfo_mips *c)
+{
+	unsigned int t;
+
+	if ((c->options & MIPS_CPU_WATCH) == 0)
+		return;
+	/*
+	 * Check which of the I,R and W bits are supported, then
+	 * disable the register.
+	 */
+	write_c0_watchlo0(7);
+	t = read_c0_watchlo0();
+	write_c0_watchlo0(0);
+	c->watch_reg_masks[0] = t & 7;
+
+	/* Write the mask bits and read them back to determine which
+	 * can be used. */
+	c->watch_reg_count = 1;
+	c->watch_reg_use_cnt = 1;
+	t = read_c0_watchhi0();
+	write_c0_watchhi0(t | 0xff8);
+	t = read_c0_watchhi0();
+	c->watch_reg_masks[0] |= (t & 0xff8);
+	if ((t & 0x80000000) == 0)
+		return;
+
+	write_c0_watchlo1(7);
+	t = read_c0_watchlo1();
+	write_c0_watchlo1(0);
+	c->watch_reg_masks[1] = t & 7;
+
+	c->watch_reg_count = 2;
+	c->watch_reg_use_cnt = 2;
+	t = read_c0_watchhi1();
+	write_c0_watchhi1(t | 0xff8);
+	t = read_c0_watchhi1();
+	c->watch_reg_masks[1] |= (t & 0xff8);
+	if ((t & 0x80000000) == 0)
+		return;
+
+	write_c0_watchlo2(7);
+	t = read_c0_watchlo2();
+	write_c0_watchlo2(0);
+	c->watch_reg_masks[2] = t & 7;
+
+	c->watch_reg_count = 3;
+	c->watch_reg_use_cnt = 3;
+	t = read_c0_watchhi2();
+	write_c0_watchhi2(t | 0xff8);
+	t = read_c0_watchhi2();
+	c->watch_reg_masks[2] |= (t & 0xff8);
+	if ((t & 0x80000000) == 0)
+		return;
+
+	write_c0_watchlo3(7);
+	t = read_c0_watchlo3();
+	write_c0_watchlo3(0);
+	c->watch_reg_masks[3] = t & 7;
+
+	c->watch_reg_count = 4;
+	c->watch_reg_use_cnt = 4;
+	t = read_c0_watchhi3();
+	write_c0_watchhi3(t | 0xff8);
+	t = read_c0_watchhi3();
+	c->watch_reg_masks[3] |= (t & 0xff8);
+	if ((t & 0x80000000) == 0)
+		return;
+
+	/* We use at most 4, but probe and report up to 8. */
+	c->watch_reg_count = 5;
+	t = read_c0_watchhi4();
+	if ((t & 0x80000000) == 0)
+		return;
+
+	c->watch_reg_count = 6;
+	t = read_c0_watchhi5();
+	if ((t & 0x80000000) == 0)
+		return;
+
+	c->watch_reg_count = 7;
+	t = read_c0_watchhi6();
+	if ((t & 0x80000000) == 0)
+		return;
+
+	c->watch_reg_count = 8;
+}