arm64: dts: realtek: rtd129x: Introduce r-bus

Model Realtek's register bus in DT.
Signed-off-by: Andreas Färber <afaerber@suse.de>

arch/arm64/boot/dts/realtek/rtd129x.dtsi

@@ -55,70 +55,78 @@ soc {
 		/* Exclude up to 2 GiB of RAM */
 		ranges = <0x80000000 0x80000000 0x80000000>;
 
-		reset1: reset-controller@98000000 {
-			compatible = "snps,dw-low-reset";
-			reg = <0x98000000 0x4>;
-			#reset-cells = <1>;
-		};
-
-		reset2: reset-controller@98000004 {
-			compatible = "snps,dw-low-reset";
-			reg = <0x98000004 0x4>;
-			#reset-cells = <1>;
-		};
-
-		reset3: reset-controller@98000008 {
-			compatible = "snps,dw-low-reset";
-			reg = <0x98000008 0x4>;
-			#reset-cells = <1>;
-		};
-
-		reset4: reset-controller@98000050 {
-			compatible = "snps,dw-low-reset";
-			reg = <0x98000050 0x4>;
-			#reset-cells = <1>;
-		};
-
-		iso_reset: reset-controller@98007088 {
-			compatible = "snps,dw-low-reset";
-			reg = <0x98007088 0x4>;
-			#reset-cells = <1>;
-		};
-
-		wdt: watchdog@98007680 {
-			compatible = "realtek,rtd1295-watchdog";
-			reg = <0x98007680 0x100>;
-			clocks = <&osc27M>;
-		};
-
-		uart0: serial@98007800 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x98007800 0x400>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clock-frequency = <27000000>;
-			resets = <&iso_reset RTD1295_ISO_RSTN_UR0>;
-			status = "disabled";
-		};
-
-		uart1: serial@9801b200 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x9801b200 0x100>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clock-frequency = <432000000>;
-			resets = <&reset2 RTD1295_RSTN_UR1>;
-			status = "disabled";
-		};
-
-		uart2: serial@9801b400 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x9801b400 0x100>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clock-frequency = <432000000>;
-			resets = <&reset2 RTD1295_RSTN_UR2>;
-			status = "disabled";
+		rbus: bus@98000000 {
+			compatible = "simple-bus";
+			reg = <0x98000000 0x200000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x98000000 0x200000>;
+
+			reset1: reset-controller@0 {
+				compatible = "snps,dw-low-reset";
+				reg = <0x0 0x4>;
+				#reset-cells = <1>;
+			};
+
+			reset2: reset-controller@4 {
+				compatible = "snps,dw-low-reset";
+				reg = <0x4 0x4>;
+				#reset-cells = <1>;
+			};
+
+			reset3: reset-controller@8 {
+				compatible = "snps,dw-low-reset";
+				reg = <0x8 0x4>;
+				#reset-cells = <1>;
+			};
+
+			reset4: reset-controller@50 {
+				compatible = "snps,dw-low-reset";
+				reg = <0x50 0x4>;
+				#reset-cells = <1>;
+			};
+
+			iso_reset: reset-controller@7088 {
+				compatible = "snps,dw-low-reset";
+				reg = <0x7088 0x4>;
+				#reset-cells = <1>;
+			};
+
+			wdt: watchdog@7680 {
+				compatible = "realtek,rtd1295-watchdog";
+				reg = <0x7680 0x100>;
+				clocks = <&osc27M>;
+			};
+
+			uart0: serial@7800 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x7800 0x400>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				clock-frequency = <27000000>;
+				resets = <&iso_reset RTD1295_ISO_RSTN_UR0>;
+				status = "disabled";
+			};
+
+			uart1: serial@1b200 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x1b200 0x100>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				clock-frequency = <432000000>;
+				resets = <&reset2 RTD1295_RSTN_UR1>;
+				status = "disabled";
+			};
+
+			uart2: serial@1b400 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x1b400 0x100>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				clock-frequency = <432000000>;
+				resets = <&reset2 RTD1295_RSTN_UR2>;
+				status = "disabled";
+			};
 		};
 
 		gic: interrupt-controller@ff011000 {