Merge tag 'docs-5.8-2' of git://git.lwn.net/linux

Pull more documentation updates from Jonathan Corbet: "A handful of late-arriving docs fixes, along with a patch changing a lot of HTTP links to HTTPS that had to be yanked and redone before the first pull" * tag 'docs-5.8-2' of git://git.lwn.net/linux: docs/memory-barriers.txt/kokr: smp_mb__{before,after}_atomic(): update Documentation Documentation: devres: add missing entry for devm_platform_get_and_ioremap_resource() Replace HTTP links with HTTPS ones: documentation docs: it_IT: address invalid reference warnings doc: zh_CN: use doc reference to resolve undefined label warning docs: Update the location of the LF NDA program docs: dev-tools: coccinelle: underlines

Merge tag 'docs-5.8-2' of git://git.lwn.net/linux
Pull more documentation updates from Jonathan Corbet: "A handful of late-arriving docs fixes, along with a patch changing a lot of HTTP links to HTTPS that had to be yanked and redone before the first pull" * tag 'docs-5.8-2' of git://git.lwn.net/linux: docs/memory-barriers.txt/kokr: smp_mb__{before,after}_atomic(): update Documentation Documentation: devres: add missing entry for devm_platform_get_and_ioremap_resource() Replace HTTP links with HTTPS ones: documentation docs: it_IT: address invalid reference warnings doc: zh_CN: use doc reference to resolve undefined label warning docs: Update the location of the LF NDA program docs: dev-tools: coccinelle: underlines
6d62c5b2 · Linus Torvalds · 6672966d · 146f5cde · 6d62c5b2 · 6d62c5b2
Commit 6d62c5b2 authored Jun 10, 2020 by Linus Torvalds
41 changed files
--- a/Documentation/COPYING-logo
+++ b/Documentation/COPYING-logo
@@ -9,5 +9,5 @@ scale down to smaller sizes and are better for letterheads or whatever
 you want to use it for: for the full range of logos take a look at
 Larry's web-page:

-	http://www.isc.tamu.edu/~lewing/linux/
+	https://www.isc.tamu.edu/~lewing/linux/

--- a/Documentation/admin-guide/LSM/tomoyo.rst
+++ b/Documentation/admin-guide/LSM/tomoyo.rst
@@ -27,29 +27,29 @@ Where is documentation?
 =======================

 User <-> Kernel interface documentation is available at
-http://tomoyo.osdn.jp/2.5/policy-specification/index.html .
+https://tomoyo.osdn.jp/2.5/policy-specification/index.html .

 Materials we prepared for seminars and symposiums are available at
-http://osdn.jp/projects/tomoyo/docs/?category_id=532&language_id=1 .
+https://osdn.jp/projects/tomoyo/docs/?category_id=532&language_id=1 .
 Below lists are chosen from three aspects.

 What is TOMOYO?
  TOMOYO Linux Overview
-    http://osdn.jp/projects/tomoyo/docs/lca2009-takeda.pdf
+    https://osdn.jp/projects/tomoyo/docs/lca2009-takeda.pdf
  TOMOYO Linux: pragmatic and manageable security for Linux
-    http://osdn.jp/projects/tomoyo/docs/freedomhectaipei-tomoyo.pdf
+    https://osdn.jp/projects/tomoyo/docs/freedomhectaipei-tomoyo.pdf
  TOMOYO Linux: A Practical Method to Understand and Protect Your Own Linux Box
-    http://osdn.jp/projects/tomoyo/docs/PacSec2007-en-no-demo.pdf
+    https://osdn.jp/projects/tomoyo/docs/PacSec2007-en-no-demo.pdf

 What can TOMOYO do?
  Deep inside TOMOYO Linux
-    http://osdn.jp/projects/tomoyo/docs/lca2009-kumaneko.pdf
+    https://osdn.jp/projects/tomoyo/docs/lca2009-kumaneko.pdf
  The role of "pathname based access control" in security.
-    http://osdn.jp/projects/tomoyo/docs/lfj2008-bof.pdf
+    https://osdn.jp/projects/tomoyo/docs/lfj2008-bof.pdf

 History of TOMOYO?
  Realities of Mainlining
-    http://osdn.jp/projects/tomoyo/docs/lfj2008.pdf
+    https://osdn.jp/projects/tomoyo/docs/lfj2008.pdf

 What is future plan?
 ====================

--- a/Documentation/admin-guide/acpi/initrd_table_override.rst
+++ b/Documentation/admin-guide/acpi/initrd_table_override.rst
@@ -102,7 +102,7 @@ Where to retrieve userspace tools
 =================================

 iasl and acpixtract are part of Intel's ACPICA project:
-http://acpica.org/
+https://acpica.org/

 and should be packaged by distributions (for example in the acpica package
 on SUSE).

--- a/Documentation/admin-guide/bcache.rst
+++ b/Documentation/admin-guide/bcache.rst
@@ -7,9 +7,9 @@ nice if you could use them as cache... Hence bcache.

 Wiki and git repositories are at:

-  - http://bcache.evilpiepirate.org
+  - https://bcache.evilpiepirate.org
  - http://evilpiepirate.org/git/linux-bcache.git
-  - http://evilpiepirate.org/git/bcache-tools.git
+  - https://evilpiepirate.org/git/bcache-tools.git

 It's designed around the performance characteristics of SSDs - it only allocates
 in erase block sized buckets, and it uses a hybrid btree/log to track cached

--- a/Documentation/admin-guide/devices.rst
+++ b/Documentation/admin-guide/devices.rst
@@ -17,7 +17,7 @@ Specifically explore the sections titled "CHAR and MISC DRIVERS", and
 to involve for character and block devices.

 This document is included by reference into the Filesystem Hierarchy
-Standard (FHS).	 The FHS is available from http://www.pathname.com/fhs/.
+Standard (FHS).	 The FHS is available from https://www.pathname.com/fhs/.

 Allocations marked (68k/Amiga) apply to Linux/68k on the Amiga
 platform only.	Allocations marked (68k/Atari) apply to Linux/68k on

--- a/Documentation/admin-guide/initrd.rst
+++ b/Documentation/admin-guide/initrd.rst
@@ -376,7 +376,7 @@ Resources
 ---------

 .. [#f1] Almesberger, Werner; "Booting Linux: The History and the Future"
-    http://www.almesberger.net/cv/papers/ols2k-9.ps.gz
+    https://www.almesberger.net/cv/papers/ols2k-9.ps.gz
 .. [#f2] newlib package (experimental), with initrd example
    https://www.sourceware.org/newlib/
 .. [#f3] util-linux: Miscellaneous utilities for Linux

--- a/Documentation/admin-guide/md.rst
+++ b/Documentation/admin-guide/md.rst
@@ -5,7 +5,7 @@ Boot time assembly of RAID arrays
 ---------------------------------

 Tools that manage md devices can be found at
-   http://www.kernel.org/pub/linux/utils/raid/
+   https://www.kernel.org/pub/linux/utils/raid/


 You can boot with your md device with the following kernel command

--- a/Documentation/admin-guide/mono.rst
+++ b/Documentation/admin-guide/mono.rst
@@ -12,11 +12,11 @@ other program after you have done the following:
   a binary package, a source tarball or by installing from Git. Binary
   packages for several distributions can be found at:

-	http://www.mono-project.com/download/
+	https://www.mono-project.com/download/

   Instructions for compiling Mono can be found at:

-	http://www.mono-project.com/docs/compiling-mono/linux/
+	https://www.mono-project.com/docs/compiling-mono/linux/

   Once the Mono CLR support has been installed, just check that
   ``/usr/bin/mono`` (which could be located elsewhere, for example

--- a/Documentation/admin-guide/reporting-bugs.rst
+++ b/Documentation/admin-guide/reporting-bugs.rst
@@ -75,7 +75,7 @@ Tips for reporting bugs

 If you haven't reported a bug before, please read:

-	http://www.chiark.greenend.org.uk/~sgtatham/bugs.html
+	https://www.chiark.greenend.org.uk/~sgtatham/bugs.html

 	http://www.catb.org/esr/faqs/smart-questions.html


--- a/Documentation/admin-guide/unicode.rst
+++ b/Documentation/admin-guide/unicode.rst
@@ -114,7 +114,7 @@ Unicode practice.
  This range is now officially managed by the ConScript Unicode
  Registry.  The normative reference is at:

-	http://www.evertype.com/standards/csur/klingon.html
+	https://www.evertype.com/standards/csur/klingon.html

 Klingon has an alphabet of 26 characters, a positional numeric writing
 system with 10 digits, and is written left-to-right, top-to-bottom.
@@ -178,7 +178,7 @@ fictional and artificial scripts has been established by John Cowan
 <jcowan@reutershealth.com> and Michael Everson <everson@evertype.com>.
 The ConScript Unicode Registry is accessible at:

-	  http://www.evertype.com/standards/csur/
+	  https://www.evertype.com/standards/csur/

 The ranges used fall at the low end of the End User Zone and can hence
 not be normatively assigned, but it is recommended that people who

--- a/Documentation/conf.py
+++ b/Documentation/conf.py
@@ -538,7 +538,7 @@ epub_exclude_files = ['search.html']
 # Grouping the document tree into PDF files. List of tuples
 # (source start file, target name, title, author, options).
 #
-# See the Sphinx chapter of http://ralsina.me/static/manual.pdf
+# See the Sphinx chapter of https://ralsina.me/static/manual.pdf
 #
 # FIXME: Do not add the index file here; the result will be too big. Adding
 # multiple PDF files here actually tries to get the cross-referencing right

--- a/Documentation/core-api/rbtree.rst
+++ b/Documentation/core-api/rbtree.rst
@@ -36,10 +36,10 @@ This document covers use of the Linux rbtree implementation.  For more
 information on the nature and implementation of Red Black Trees,  see:

  Linux Weekly News article on red-black trees
-    http://lwn.net/Articles/184495/
+    https://lwn.net/Articles/184495/

  Wikipedia entry on red-black trees
-    http://en.wikipedia.org/wiki/Red-black_tree
+    https://en.wikipedia.org/wiki/Red-black_tree

 Linux implementation of red-black trees
 ---------------------------------------

--- a/Documentation/dev-tools/coccinelle.rst
+++ b/Documentation/dev-tools/coccinelle.rst
@@ -14,7 +14,7 @@ many uses in kernel development, including the application of complex,
 tree-wide patches and detection of problematic programming patterns.

 Getting Coccinelle
-------------------
+------------------

 The semantic patches included in the kernel use features and options
 which are provided by Coccinelle version 1.0.0-rc11 and above.
@@ -56,7 +56,7 @@ found at:
 https://github.com/coccinelle/coccinelle/blob/master/install.txt

 Supplemental documentation
---------------------------
+--------------------------

 For supplemental documentation refer to the wiki:

@@ -128,7 +128,7 @@ To enable verbose messages set the V= variable, for example::
   make coccicheck MODE=report V=1

 Coccinelle parallelization
---------------------------
+--------------------------

 By default, coccicheck tries to run as parallel as possible. To change
 the parallelism, set the J= variable. For example, to run across 4 CPUs::
@@ -333,7 +333,7 @@ as an example if requiring at least Coccinelle >= 1.0.5::
 	// Requires: 1.0.5

 Proposing new semantic patches
-------------------------------
+------------------------------

 New semantic patches can be proposed and submitted by kernel
 developers. For sake of clarity, they should be organized in the

--- a/Documentation/dev-tools/gdb-kernel-debugging.rst
+++ b/Documentation/dev-tools/gdb-kernel-debugging.rst
@@ -24,7 +24,7 @@ Setup

 - Create a virtual Linux machine for QEMU/KVM (see www.linux-kvm.org and
  www.qemu.org for more details). For cross-development,
-  http://landley.net/aboriginal/bin keeps a pool of machine images and
+  https://landley.net/aboriginal/bin keeps a pool of machine images and
  toolchains that can be helpful to start from.

 - Build the kernel with CONFIG_GDB_SCRIPTS enabled, but leave

--- a/Documentation/doc-guide/parse-headers.rst
+++ b/Documentation/doc-guide/parse-headers.rst
@@ -186,7 +186,7 @@ COPYRIGHT

 Copyright (c) 2016 by Mauro Carvalho Chehab <mchehab+samsung@kernel.org>.

-License GPLv2: GNU GPL version 2 <http://gnu.org/licenses/gpl.html>.
+License GPLv2: GNU GPL version 2 <https://gnu.org/licenses/gpl.html>.

 This is free software: you are free to change and redistribute it.
 There is NO WARRANTY, to the extent permitted by law.
--- a/Documentation/driver-api/acpi/linuxized-acpica.rst
+++ b/Documentation/driver-api/acpi/linuxized-acpica.rst
@@ -175,9 +175,9 @@ illustrated in the following figure::
    B. acpica / master - "master" branch of the git repository at
       <https://github.com/acpica/acpica.git>.
    C. linux-pm / linux-next - "linux-next" branch of the git repository at
-       <http://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git>.
+       <https://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git>.
    D. linux / master - "master" branch of the git repository at
-       <http://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git>.
+       <https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git>.

   Before the linuxized ACPICA patches are sent to the Linux ACPI community
   for review, there is a quality assurance build test process to reduce
@@ -274,6 +274,6 @@ before they become available from the ACPICA release process.
   a diff file indicating the state of the current divergences::

   # git clone https://github.com/acpica/acpica
-   # git clone http://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
+   # git clone https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
   # cd acpica
   # generate/linux/divergences.sh -s ../linux
--- a/Documentation/driver-api/driver-model/devres.rst
+++ b/Documentation/driver-api/driver-model/devres.rst
@@ -314,6 +314,7 @@ IOMAP
  devm_platform_ioremap_resource() : calls devm_ioremap_resource() for platform device
  devm_platform_ioremap_resource_wc()
  devm_platform_ioremap_resource_byname()
+  devm_platform_get_and_ioremap_resource()
  devm_iounmap()
  pcim_iomap()
  pcim_iomap_regions()	: do request_region() and iomap() on multiple BARs

--- a/Documentation/driver-api/usb/bulk-streams.rst
+++ b/Documentation/driver-api/usb/bulk-streams.rst
@@ -9,9 +9,9 @@ device driver to overload a bulk endpoint so that multiple transfers can be
 queued at once.

 Streams are defined in sections 4.4.6.4 and 8.12.1.4 of the Universal Serial Bus
-3.0 specification at http://www.usb.org/developers/docs/  The USB Attached SCSI
+3.0 specification at https://www.usb.org/developers/docs/  The USB Attached SCSI
 Protocol, which uses streams to queue multiple SCSI commands, can be found on
-the T10 website (http://t10.org/).
+the T10 website (https://t10.org/).


 Device-side implications

--- a/Documentation/driver-api/usb/writing_musb_glue_layer.rst
+++ b/Documentation/driver-api/usb/writing_musb_glue_layer.rst
@@ -707,12 +707,12 @@ cheerful guidance and support.
 Resources
 =========

-USB Home Page: http://www.usb.org
+USB Home Page: https://www.usb.org

-linux-usb Mailing List Archives: http://marc.info/?l=linux-usb
+linux-usb Mailing List Archives: https://marc.info/?l=linux-usb

 USB On-the-Go Basics:
-http://www.maximintegrated.com/app-notes/index.mvp/id/1822
+https://www.maximintegrated.com/app-notes/index.mvp/id/1822

 :ref:`Writing USB Device Drivers <writing-usb-driver>`


--- a/Documentation/filesystems/path-lookup.txt
+++ b/Documentation/filesystems/path-lookup.txt
@@ -375,7 +375,7 @@ common path elements, the more likely they will exist in dentry cache.
 Papers and other documentation on dcache locking
 ================================================

-1. Scaling dcache with RCU (http://linuxjournal.com/article.php?sid=7124).
+1. Scaling dcache with RCU (https://linuxjournal.com/article.php?sid=7124).

 2. http://lse.sourceforge.net/locking/dcache/dcache.html


--- a/Documentation/filesystems/seq_file.rst
+++ b/Documentation/filesystems/seq_file.rst
@@ -7,7 +7,7 @@ The seq_file Interface
 	Copyright 2003 Jonathan Corbet <corbet@lwn.net>

 	This file is originally from the LWN.net Driver Porting series at
-	http://lwn.net/Articles/driver-porting/
+	https://lwn.net/Articles/driver-porting/


 There are numerous ways for a device driver (or other kernel component) to
@@ -57,7 +57,7 @@ Then concatenate the output files out1 and out2 and get the right
 result. Yes, it is a thoroughly useless module, but the point is to show
 how the mechanism works without getting lost in other details.  (Those
 wanting to see the full source for this module can find it at
-http://lwn.net/Articles/22359/).
+https://lwn.net/Articles/22359/).

 Deprecated create_proc_entry
 ============================

--- a/Documentation/misc-devices/c2port.txt
+++ b/Documentation/misc-devices/c2port.txt
@@ -28,14 +28,14 @@ where the micro controller is connected via special GPIOs pins.
 References
 ----------

-The C2 Interface main references are at (http://www.silabs.com)
+The C2 Interface main references are at (https://www.silabs.com)
 Silicon Laboratories site], see:

 - AN127: FLASH Programming via the C2 Interface at
-http://www.silabs.com/Support Documents/TechnicalDocs/an127.pdf 
+https://www.silabs.com/Support Documents/TechnicalDocs/an127.pdf 

 - C2 Specification at
-http://www.silabs.com/pages/DownloadDoc.aspx?FILEURL=Support%20Documents/TechnicalDocs/an127.pdf&src=SearchResults
+https://www.silabs.com/pages/DownloadDoc.aspx?FILEURL=Support%20Documents/TechnicalDocs/an127.pdf&src=SearchResults

 however it implements a two wire serial communication protocol (bit
 banging) designed to enable in-system programming, debugging, and

--- a/Documentation/process/3.Early-stage.rst
+++ b/Documentation/process/3.Early-stage.rst
@@ -46,7 +46,7 @@ and posted this:
 	to communicate user requirements to these people is a waste of
 	time. They are much too "intelligent" to listen to lesser mortals.

-(http://lwn.net/Articles/131776/).
+(https://lwn.net/Articles/131776/).

 The reality of the situation was different; the kernel developers were far
 more concerned about system stability, long-term maintenance, and finding
@@ -216,7 +216,7 @@ a non-disclosure agreement.  The Linux Foundation operates an NDA program
 designed to help with this sort of situation; more information can be found
 at:

-    http://www.linuxfoundation.org/en/NDA_program
+    https://www.linuxfoundation.org/nda/

 This kind of review is often enough to avoid serious problems later on
 without requiring public disclosure of the project.
--- a/Documentation/process/7.AdvancedTopics.rst
+++ b/Documentation/process/7.AdvancedTopics.rst
@@ -29,9 +29,9 @@ long document in its own right.  Instead, the focus here will be on how git
 fits into the kernel development process in particular.  Developers who
 wish to come up to speed with git will find more information at:

-	http://git-scm.com/
+	https://git-scm.com/

-	http://www.kernel.org/pub/software/scm/git/docs/user-manual.html
+	https://www.kernel.org/pub/software/scm/git/docs/user-manual.html

 and on various tutorials found on the web.

@@ -55,7 +55,7 @@ server with git-daemon is relatively straightforward if you have a system
 which is accessible to the Internet.  Otherwise, free, public hosting sites
 (Github, for example) are starting to appear on the net.  Established
 developers can get an account on kernel.org, but those are not easy to come
-by; see http://kernel.org/faq/ for more information.
+by; see https://kernel.org/faq/ for more information.

 The normal git workflow involves the use of a lot of branches.  Each line
 of development can be separated into a separate "topic branch" and
@@ -125,7 +125,7 @@ can affect your ability to get trees pulled in the future.  Quoting Linus:
 	to trust things *without* then having to go and check every
 	individual change by hand.

-(http://lwn.net/Articles/224135/).
+(https://lwn.net/Articles/224135/).

 To avoid this kind of situation, ensure that all patches within a given
 branch stick closely to the associated topic; a "driver fixes" branch

--- a/Documentation/process/8.Conclusion.rst
+++ b/Documentation/process/8.Conclusion.rst
@@ -16,24 +16,24 @@ distributions runs into internal limits and fails to process the documents
 properly).

 Various web sites discuss kernel development at all levels of detail.  Your
-author would like to humbly suggest http://lwn.net/ as a source;
+author would like to humbly suggest https://lwn.net/ as a source;
 information on many specific kernel topics can be found via the LWN kernel
 index at:

-	http://lwn.net/Kernel/Index/
+	https://lwn.net/Kernel/Index/

 Beyond that, a valuable resource for kernel developers is:

-	http://kernelnewbies.org/
+	https://kernelnewbies.org/

-And, of course, one should not forget http://kernel.org/, the definitive
+And, of course, one should not forget https://kernel.org/, the definitive
 location for kernel release information.

 There are a number of books on kernel development:

 	Linux Device Drivers, 3rd Edition (Jonathan Corbet, Alessandro
 	Rubini, and Greg Kroah-Hartman).  Online at
-	http://lwn.net/Kernel/LDD3/.
+	https://lwn.net/Kernel/LDD3/.

 	Linux Kernel Development (Robert Love).

@@ -46,9 +46,9 @@ information to be found there.

 Documentation for git can be found at:

-	http://www.kernel.org/pub/software/scm/git/docs/
+	https://www.kernel.org/pub/software/scm/git/docs/

-	http://www.kernel.org/pub/software/scm/git/docs/user-manual.html
+	https://www.kernel.org/pub/software/scm/git/docs/user-manual.html


 Conclusion

--- a/Documentation/process/adding-syscalls.rst
+++ b/Documentation/process/adding-syscalls.rst
@@ -541,9 +541,9 @@ References and Sources
   :manpage:`syscall(2)` man-page:
   http://man7.org/linux/man-pages/man2/syscall.2.html#NOTES
 - Collated emails from Linus Torvalds discussing the problems with ``ioctl()``:
-   http://yarchive.net/comp/linux/ioctl.html
+   https://yarchive.net/comp/linux/ioctl.html
 - "How to not invent kernel interfaces", Arnd Bergmann,
-   http://www.ukuug.org/events/linux2007/2007/papers/Bergmann.pdf
+   https://www.ukuug.org/events/linux2007/2007/papers/Bergmann.pdf
 - LWN article from Michael Kerrisk on avoiding new uses of CAP_SYS_ADMIN:
   https://lwn.net/Articles/486306/
 - Recommendation from Andrew Morton that all related information for a new

--- a/Documentation/process/applying-patches.rst
+++ b/Documentation/process/applying-patches.rst
@@ -229,7 +229,7 @@ Although interdiff may save you a step or two you are generally advised to
 do the additional steps since interdiff can get things wrong in some cases.

 Another alternative is ``ketchup``, which is a python script for automatic
-downloading and applying of patches (http://www.selenic.com/ketchup/).
+downloading and applying of patches (https://www.selenic.com/ketchup/).

 Other nice tools are diffstat, which shows a summary of changes made by a
 patch; lsdiff, which displays a short listing of affected files in a patch
@@ -241,7 +241,7 @@ the patch contains a given regular expression.
 Where can I download the patches?
 =================================

-The patches are available at http://kernel.org/
+The patches are available at https://kernel.org/
 Most recent patches are linked from the front page, but they also have
 specific homes.


--- a/Documentation/process/volatile-considered-harmful.rst
+++ b/Documentation/process/volatile-considered-harmful.rst
@@ -109,9 +109,9 @@ been properly thought through.
 References
 ==========

-[1] http://lwn.net/Articles/233481/
+[1] https://lwn.net/Articles/233481/

-[2] http://lwn.net/Articles/233482/
+[2] https://lwn.net/Articles/233482/

 Credits
 =======

--- a/Documentation/security/SCTP.rst
+++ b/Documentation/security/SCTP.rst
@@ -328,7 +328,7 @@ NOTES:
      label (see **netlabel-config**\(8) helper script for details).

   5) The NetLabel SCTP peer labeling rules apply as discussed in the following
-      set of posts tagged "netlabel" at: http://www.paul-moore.com/blog/t.
+      set of posts tagged "netlabel" at: https://www.paul-moore.com/blog/t.

   6) CIPSO is only supported for IPv4 addressing: ``socket(AF_INET, ...)``
      CALIPSO is only supported for IPv6 addressing: ``socket(AF_INET6, ...)``

--- a/Documentation/sphinx/kfigure.py
+++ b/Documentation/sphinx/kfigure.py
@@ -29,7 +29,7 @@ u"""

    Used tools:

-    * ``dot(1)``: Graphviz (http://www.graphviz.org). If Graphviz is not
+    * ``dot(1)``: Graphviz (https://www.graphviz.org). If Graphviz is not
      available, the DOT language is inserted as literal-block.

    * SVG to PDF: To generate PDF, you need at least one of this tools:
@@ -41,7 +41,7 @@ u"""
    * generate PDF from SVG / used by PDF (LaTeX) builder

    * generate SVG (html-builder) and PDF (latex-builder) from DOT files.
-      DOT: see http://www.graphviz.org/content/dot-language
+      DOT: see https://www.graphviz.org/content/dot-language

    """

@@ -182,7 +182,7 @@ def setupTools(app):
        kernellog.verbose(app, "use dot(1) from: " + dot_cmd)
    else:
        kernellog.warn(app, "dot(1) not found, for better output quality install "
-                       "graphviz from http://www.graphviz.org")
+                       "graphviz from https://www.graphviz.org")
    if convert_cmd:
        kernellog.verbose(app, "use convert(1) from: " + convert_cmd)
    else:

--- a/Documentation/static-keys.txt
+++ b/Documentation/static-keys.txt
@@ -71,7 +71,7 @@ Solution

 gcc (v4.5) adds a new 'asm goto' statement that allows branching to a label:

-http://gcc.gnu.org/ml/gcc-patches/2009-07/msg01556.html
+https://gcc.gnu.org/ml/gcc-patches/2009-07/msg01556.html

 Using the 'asm goto', we can create branches that are either taken or not taken
 by default, without the need to check memory. Then, at run-time, we can patch

--- a/Documentation/trace/events-msr.rst
+++ b/Documentation/trace/events-msr.rst
@@ -4,7 +4,7 @@ MSR Trace Events

 The x86 kernel supports tracing most MSR (Model Specific Register) accesses.
 To see the definition of the MSRs on Intel systems please see the SDM
-at http://www.intel.com/sdm (Volume 3)
+at https://www.intel.com/sdm (Volume 3)

 Available trace points:


--- a/Documentation/trace/mmiotrace.rst
+++ b/Documentation/trace/mmiotrace.rst
@@ -5,7 +5,7 @@ In-kernel memory-mapped I/O tracing

 Home page and links to optional user space tools:

-	http://nouveau.freedesktop.org/wiki/MmioTrace
+	https://nouveau.freedesktop.org/wiki/MmioTrace

 MMIO tracing was originally developed by Intel around 2003 for their Fault
 Injection Test Harness. In Dec 2006 - Jan 2007, using the code from Intel,

--- a/Documentation/translations/it_IT/kernel-hacking/hacking.rst
+++ b/Documentation/translations/it_IT/kernel-hacking/hacking.rst
@@ -634,7 +634,7 @@ Definita in ``include/linux/export.h``

 Questa è una variate di `EXPORT_SYMBOL()` che permette di specificare uno
 spazio dei nomi. Lo spazio dei nomi è documentato in
-:doc:`../core-api/symbol-namespaces`
+:doc:`../../../core-api/symbol-namespaces`

 :c:func:`EXPORT_SYMBOL_NS_GPL()`
 --------------------------------
@@ -643,7 +643,7 @@ Definita in ``include/linux/export.h``

 Questa è una variate di `EXPORT_SYMBOL_GPL()` che permette di specificare uno
 spazio dei nomi. Lo spazio dei nomi è documentato in
-:doc:`../core-api/symbol-namespaces`
+:doc:`../../../core-api/symbol-namespaces`

 Procedure e convenzioni
 =======================

--- a/Documentation/translations/it_IT/process/email-clients.rst
+++ b/Documentation/translations/it_IT/process/email-clients.rst
@@ -3,6 +3,8 @@
 :Original: :doc:`../../../process/email-clients`
 :Translator: Alessia Mantegazza <amantegazza@vaga.pv.it>

+.. _it_email_clients:
+
 Informazioni sui programmi di posta elettronica per Linux
 =========================================================


--- a/Documentation/translations/it_IT/process/management-style.rst
+++ b/Documentation/translations/it_IT/process/management-style.rst
@@ -3,6 +3,8 @@
 :Original: :doc:`../../../process/management-style`
 :Translator: Alessia Mantegazza <amantegazza@vaga.pv.it>

+.. _it_managementstyle:
+
 Il modello di gestione del kernel Linux
 =======================================


--- a/Documentation/translations/ko_KR/memory-barriers.txt
+++ b/Documentation/translations/ko_KR/memory-barriers.txt
@@ -1842,12 +1842,15 @@ Mandatory 배리어들은 SMP 시스템에서도 UP 시스템에서도 SMP 효
 (*) smp_mb__before_atomic();
 (*) smp_mb__after_atomic();

-     이것들은 값을 리턴하지 않는 (더하기, 빼기, 증가, 감소와 같은) 어토믹
-     함수들을 위한, 특히 그것들이 레퍼런스 카운팅에 사용될 때를 위한
-     함수들입니다.  이 함수들은 메모리 배리어를 내포하고 있지는 않습니다.
-
-     이것들은 값을 리턴하지 않으며 어토믹한 (set_bit 과 clear_bit 같은) 비트
-     연산에도 사용될 수 있습니다.
+     이것들은 메모리 배리어를 내포하지 않는 어토믹 RMW 함수를 사용하지만 코드에
+     메모리 배리어가 필요한 경우를 위한 것들입니다.  메모리 배리어를 내포하지
+     않는 어토믹 RMW 함수들의 예로는 더하기, 빼기, (실패한) 조건적
+     오퍼레이션들, _relaxed 함수들이 있으며, atomic_read 나 atomic_set 은 이에
+     해당되지 않습니다.  메모리 배리어가 필요해지는 흔한 예로는 어토믹
+     오퍼레이션을 사용해 레퍼런스 카운트를 수정하는 경우를 들 수 있습니다.
+
+     이것들은 또한 (set_bit 과 clear_bit 같은) 메모리 배리어를 내포하지 않는
+     어토믹 RMW bitop 함수들을 위해서도 사용될 수 있습니다.

     한 예로, 객체 하나를 무효한 것으로 표시하고 그 객체의 레퍼런스 카운트를
     감소시키는 다음 코드를 보세요:

--- a/Documentation/translations/zh_CN/filesystems/debugfs.rst
+++ b/Documentation/translations/zh_CN/filesystems/debugfs.rst
@@ -2,7 +2,7 @@

 .. include:: ../disclaimer-zh_CN.rst

-:Original: :ref:`Documentation/filesystems/debugfs.txt <debugfs_index>`
+:Original: :doc:`../../../filesystems/debugfs`

 =======
 Debugfs

--- a/Documentation/vm/ksm.rst
+++ b/Documentation/vm/ksm.rst
@@ -6,7 +6,7 @@ Kernel Samepage Merging

 KSM is a memory-saving de-duplication feature, enabled by CONFIG_KSM=y,
 added to the Linux kernel in 2.6.32.  See ``mm/ksm.c`` for its implementation,
-and http://lwn.net/Articles/306704/ and http://lwn.net/Articles/330589/
+and http://lwn.net/Articles/306704/ and https://lwn.net/Articles/330589/

 The userspace interface of KSM is described in :ref:`Documentation/admin-guide/mm/ksm.rst <admin_guide_ksm>`


--- a/Documentation/xz.txt
+++ b/Documentation/xz.txt
@@ -14,13 +14,13 @@ improve compression ratio of executable data.
 The XZ decompressor in Linux is called XZ Embedded. It supports
 the LZMA2 filter and optionally also BCJ filters. CRC32 is supported
 for integrity checking. The home page of XZ Embedded is at
-<http://tukaani.org/xz/embedded.html>, where you can find the
+<https://tukaani.org/xz/embedded.html>, where you can find the
 latest version and also information about using the code outside
 the Linux kernel.

 For userspace, XZ Utils provide a zlib-like compression library
 and a gzip-like command line tool. XZ Utils can be downloaded from
-<http://tukaani.org/xz/>.
+<https://tukaani.org/xz/>.

 XZ related components in the kernel
 ===================================
@@ -113,7 +113,7 @@ Reporting bugs
 ==============

 Before reporting a bug, please check that it's not fixed already
-at upstream. See <http://tukaani.org/xz/embedded.html> to get the
+at upstream. See <https://tukaani.org/xz/embedded.html> to get the
 latest code.

 Report bugs to <lasse.collin@tukaani.org> or visit #tukaani on

--- a/scripts/kernel-doc
+++ b/scripts/kernel-doc
@@ -321,7 +321,7 @@ if (defined($ENV{'KBUILD_VERBOSE'})) {

 # Generated docbook code is inserted in a template at a point where
 # docbook v3.1 requires a non-zero sequence of RefEntry's; see:
-# http://www.oasis-open.org/docbook/documentation/reference/html/refentry.html
+# https://www.oasis-open.org/docbook/documentation/reference/html/refentry.html
 # We keep track of number of generated entries and generate a dummy
 # if needs be to ensure the expanded template can be postprocessed
 # into html.