Commit 6dae8aa0 authored by Bruce Allan's avatar Bruce Allan Committed by Jeff Kirsher

ice: use variable name more descriptive than type

The variable name 'type' is not very descriptive. Replace instances of
those with a variable name that is more descriptive or replace it if not
needed.
Signed-off-by: default avatarBruce Allan <bruce.w.allan@intel.com>
Signed-off-by: default avatarTony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: default avatarAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
parent dced8ad3
......@@ -779,7 +779,7 @@ ice_dcb_process_lldp_set_mib_change(struct ice_pf *pf,
bool need_reconfig = false;
struct ice_port_info *pi;
struct ice_vsi *pf_vsi;
u8 type;
u8 mib_type;
int ret;
/* Not DCB capable or capability disabled */
......@@ -794,16 +794,16 @@ ice_dcb_process_lldp_set_mib_change(struct ice_pf *pf,
pi = pf->hw.port_info;
mib = (struct ice_aqc_lldp_get_mib *)&event->desc.params.raw;
/* Ignore if event is not for Nearest Bridge */
type = ((mib->type >> ICE_AQ_LLDP_BRID_TYPE_S) &
ICE_AQ_LLDP_BRID_TYPE_M);
dev_dbg(dev, "LLDP event MIB bridge type 0x%x\n", type);
if (type != ICE_AQ_LLDP_BRID_TYPE_NEAREST_BRID)
mib_type = ((mib->type >> ICE_AQ_LLDP_BRID_TYPE_S) &
ICE_AQ_LLDP_BRID_TYPE_M);
dev_dbg(dev, "LLDP event MIB bridge type 0x%x\n", mib_type);
if (mib_type != ICE_AQ_LLDP_BRID_TYPE_NEAREST_BRID)
return;
/* Check MIB Type and return if event for Remote MIB update */
type = mib->type & ICE_AQ_LLDP_MIB_TYPE_M;
dev_dbg(dev, "LLDP event mib type %s\n", type ? "remote" : "local");
if (type == ICE_AQ_LLDP_MIB_REMOTE) {
mib_type = mib->type & ICE_AQ_LLDP_MIB_TYPE_M;
dev_dbg(dev, "LLDP event mib type %s\n", mib_type ? "remote" : "local");
if (mib_type == ICE_AQ_LLDP_MIB_REMOTE) {
/* Update the remote cached instance and return */
ret = ice_aq_get_dcb_cfg(pi->hw, ICE_AQ_LLDP_MIB_REMOTE,
ICE_AQ_LLDP_BRID_TYPE_NEAREST_BRID,
......
......@@ -694,7 +694,7 @@ ice_flow_rem_prof(struct ice_hw *hw, enum ice_block blk, u64 prof_id)
* ice_flow_set_fld_ext - specifies locations of field from entry's input buffer
* @seg: packet segment the field being set belongs to
* @fld: field to be set
* @type: type of the field
* @field_type: type of the field
* @val_loc: if not ICE_FLOW_FLD_OFF_INVAL, location of the value to match from
* entry's input buffer
* @mask_loc: if not ICE_FLOW_FLD_OFF_INVAL, location of mask value from entry's
......@@ -715,16 +715,16 @@ ice_flow_rem_prof(struct ice_hw *hw, enum ice_block blk, u64 prof_id)
*/
static void
ice_flow_set_fld_ext(struct ice_flow_seg_info *seg, enum ice_flow_field fld,
enum ice_flow_fld_match_type type, u16 val_loc,
enum ice_flow_fld_match_type field_type, u16 val_loc,
u16 mask_loc, u16 last_loc)
{
u64 bit = BIT_ULL(fld);
seg->match |= bit;
if (type == ICE_FLOW_FLD_TYPE_RANGE)
if (field_type == ICE_FLOW_FLD_TYPE_RANGE)
seg->range |= bit;
seg->fields[fld].type = type;
seg->fields[fld].type = field_type;
seg->fields[fld].src.val = val_loc;
seg->fields[fld].src.mask = mask_loc;
seg->fields[fld].src.last = last_loc;
......
......@@ -9,11 +9,11 @@
/**
* ice_vsi_type_str - maps VSI type enum to string equivalents
* @type: VSI type enum
* @vsi_type: VSI type enum
*/
const char *ice_vsi_type_str(enum ice_vsi_type type)
const char *ice_vsi_type_str(enum ice_vsi_type vsi_type)
{
switch (type) {
switch (vsi_type) {
case ICE_VSI_PF:
return "ICE_VSI_PF";
case ICE_VSI_VF:
......@@ -350,13 +350,13 @@ static irqreturn_t ice_msix_clean_rings(int __always_unused irq, void *data)
/**
* ice_vsi_alloc - Allocates the next available struct VSI in the PF
* @pf: board private structure
* @type: type of VSI
* @vsi_type: type of VSI
* @vf_id: ID of the VF being configured
*
* returns a pointer to a VSI on success, NULL on failure.
*/
static struct ice_vsi *
ice_vsi_alloc(struct ice_pf *pf, enum ice_vsi_type type, u16 vf_id)
ice_vsi_alloc(struct ice_pf *pf, enum ice_vsi_type vsi_type, u16 vf_id)
{
struct device *dev = ice_pf_to_dev(pf);
struct ice_vsi *vsi = NULL;
......@@ -377,13 +377,13 @@ ice_vsi_alloc(struct ice_pf *pf, enum ice_vsi_type type, u16 vf_id)
if (!vsi)
goto unlock_pf;
vsi->type = type;
vsi->type = vsi_type;
vsi->back = pf;
set_bit(__ICE_DOWN, vsi->state);
vsi->idx = pf->next_vsi;
if (type == ICE_VSI_VF)
if (vsi_type == ICE_VSI_VF)
ice_vsi_set_num_qs(vsi, vf_id);
else
ice_vsi_set_num_qs(vsi, ICE_INVAL_VFID);
......@@ -2084,7 +2084,7 @@ void ice_cfg_sw_lldp(struct ice_vsi *vsi, bool tx, bool create)
* ice_vsi_setup - Set up a VSI by a given type
* @pf: board private structure
* @pi: pointer to the port_info instance
* @type: VSI type
* @vsi_type: VSI type
* @vf_id: defines VF ID to which this VSI connects. This field is meant to be
* used only for ICE_VSI_VF VSI type. For other VSI types, should
* fill-in ICE_INVAL_VFID as input.
......@@ -2096,7 +2096,7 @@ void ice_cfg_sw_lldp(struct ice_vsi *vsi, bool tx, bool create)
*/
struct ice_vsi *
ice_vsi_setup(struct ice_pf *pf, struct ice_port_info *pi,
enum ice_vsi_type type, u16 vf_id)
enum ice_vsi_type vsi_type, u16 vf_id)
{
u16 max_txqs[ICE_MAX_TRAFFIC_CLASS] = { 0 };
struct device *dev = ice_pf_to_dev(pf);
......@@ -2104,10 +2104,10 @@ ice_vsi_setup(struct ice_pf *pf, struct ice_port_info *pi,
struct ice_vsi *vsi;
int ret, i;
if (type == ICE_VSI_VF)
vsi = ice_vsi_alloc(pf, type, vf_id);
if (vsi_type == ICE_VSI_VF)
vsi = ice_vsi_alloc(pf, vsi_type, vf_id);
else
vsi = ice_vsi_alloc(pf, type, ICE_INVAL_VFID);
vsi = ice_vsi_alloc(pf, vsi_type, ICE_INVAL_VFID);
if (!vsi) {
dev_err(dev, "could not allocate VSI\n");
......
......@@ -6,7 +6,7 @@
#include "ice.h"
const char *ice_vsi_type_str(enum ice_vsi_type type);
const char *ice_vsi_type_str(enum ice_vsi_type vsi_type);
int
ice_add_mac_to_list(struct ice_vsi *vsi, struct list_head *add_list,
......@@ -58,7 +58,7 @@ int ice_vsi_cfg_tc(struct ice_vsi *vsi, u8 ena_tc);
struct ice_vsi *
ice_vsi_setup(struct ice_pf *pf, struct ice_port_info *pi,
enum ice_vsi_type type, u16 vf_id);
enum ice_vsi_type vsi_type, u16 vf_id);
void ice_napi_del(struct ice_vsi *vsi);
......
......@@ -578,7 +578,7 @@ enum ice_status ice_get_initial_sw_cfg(struct ice_hw *hw)
struct ice_aqc_get_sw_cfg_resp_elem *ele;
u16 pf_vf_num, swid, vsi_port_num;
bool is_vf = false;
u8 type;
u8 res_type;
ele = rbuf[i].elements;
vsi_port_num = le16_to_cpu(ele->vsi_port_num) &
......@@ -593,16 +593,16 @@ enum ice_status ice_get_initial_sw_cfg(struct ice_hw *hw)
ICE_AQC_GET_SW_CONF_RESP_IS_VF)
is_vf = true;
type = le16_to_cpu(ele->vsi_port_num) >>
res_type = le16_to_cpu(ele->vsi_port_num) >>
ICE_AQC_GET_SW_CONF_RESP_TYPE_S;
if (type == ICE_AQC_GET_SW_CONF_RESP_VSI) {
if (res_type == ICE_AQC_GET_SW_CONF_RESP_VSI) {
/* FW VSI is not needed. Just continue. */
continue;
}
ice_init_port_info(hw->port_info, vsi_port_num,
type, swid, pf_vf_num, is_vf);
res_type, swid, pf_vf_num, is_vf);
}
} while (req_desc && !status);
......@@ -958,7 +958,7 @@ ice_update_vsi_list_rule(struct ice_hw *hw, u16 *vsi_handle_arr, u16 num_vsi,
struct ice_aqc_sw_rules_elem *s_rule;
enum ice_status status;
u16 s_rule_size;
u16 type;
u16 rule_type;
int i;
if (!num_vsi)
......@@ -970,11 +970,11 @@ ice_update_vsi_list_rule(struct ice_hw *hw, u16 *vsi_handle_arr, u16 num_vsi,
lkup_type == ICE_SW_LKUP_ETHERTYPE_MAC ||
lkup_type == ICE_SW_LKUP_PROMISC ||
lkup_type == ICE_SW_LKUP_PROMISC_VLAN)
type = remove ? ICE_AQC_SW_RULES_T_VSI_LIST_CLEAR :
ICE_AQC_SW_RULES_T_VSI_LIST_SET;
rule_type = remove ? ICE_AQC_SW_RULES_T_VSI_LIST_CLEAR :
ICE_AQC_SW_RULES_T_VSI_LIST_SET;
else if (lkup_type == ICE_SW_LKUP_VLAN)
type = remove ? ICE_AQC_SW_RULES_T_PRUNE_LIST_CLEAR :
ICE_AQC_SW_RULES_T_PRUNE_LIST_SET;
rule_type = remove ? ICE_AQC_SW_RULES_T_PRUNE_LIST_CLEAR :
ICE_AQC_SW_RULES_T_PRUNE_LIST_SET;
else
return ICE_ERR_PARAM;
......@@ -992,7 +992,7 @@ ice_update_vsi_list_rule(struct ice_hw *hw, u16 *vsi_handle_arr, u16 num_vsi,
cpu_to_le16(ice_get_hw_vsi_num(hw, vsi_handle_arr[i]));
}
s_rule->type = cpu_to_le16(type);
s_rule->type = cpu_to_le16(rule_type);
s_rule->pdata.vsi_list.number_vsi = cpu_to_le16(num_vsi);
s_rule->pdata.vsi_list.index = cpu_to_le16(vsi_list_id);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment