Merge tag 'linux-watchdog-4.19-rc1' of git://www.linux-watchdog.org/linux-watchdog

Pull watchdog updates from Wim Van Sebroeck:

 - add MEN 16z069 IP-Core driver

 - renesas-wdt: add support for the R8A77990 wdt

 - stm32_iwdg: Add stm32mp1 support and pclk feature

 - sp805_wdt, orion_wdt, sprd_wdt: several improvements

 - imx2_wdt, stmp3xxx: switch to SPDX identifier

* tag 'linux-watchdog-4.19-rc1' of git://www.linux-watchdog.org/linux-watchdog:
  watchdog: fix dependencies of menz69_wdt.o
  watchdog: sp805: Add clock-frequency property
  watchdog: add driver for the MEN 16z069 IP-Core
  watchdog: sprd_wdt: Remove redundant dev_err call in sprd_wdt_probe()
  watchdog: stmp3xxx: Switch to SPDX identifier
  watchdog: imx2_wdt: Switch to SPDX identifier
  watchdog: sp805: set WDOG_HW_RUNNING when appropriate
  watchdog: sp805: add 'timeout-sec' DT property support
  dt-bindings: watchdog: Add optional 'timeout-sec' property for sp805
  dt-bindings: watchdog: Consolidate SP805 binding docs
  watchdog: orion_wdt: Mark watchdog as active when running at probe
  watchdog: stm32: add pclk feature for stm32mp1
  dt-bindings: watchdog: add stm32mp1 support
  dt-bindings: watchdog: renesas-wdt: Add support for the R8A77990 wdt

Documentation/devicetree/bindings/watchdog/arm,sp805.txt

 ARM AMBA Primecell SP805 Watchdog
 
+SP805 WDT is a ARM Primecell Peripheral and has a standard-id register that
+can be used to identify the peripheral type, vendor, and revision.
+This value can be used for driver matching.
+
+As SP805 WDT is a primecell IP, it follows the base bindings specified in
+'arm/primecell.txt'
+
 Required properties:
-- compatible: Should be "arm,sp805" & "arm,primecell"
-- reg: Should contain location and length for watchdog timer register.
-- interrupts: Should contain the list of watchdog timer interrupts.
-- clocks: clocks driving the watchdog timer hardware. This list should be 2
-	clocks. With 2 clocks, the order is wdogclk clock, apb_pclk.
+- compatible:  Should be "arm,sp805" & "arm,primecell"
+- reg:         Should contain location and length for watchdog timer register
+- clocks:      Clocks driving the watchdog timer hardware. This list should be
+               2 clocks. With 2 clocks, the order is wdog_clk, apb_pclk
+               wdog_clk can be equal to or be a sub-multiple of the apb_pclk
+               frequency
+- clock-names: Shall be "wdog_clk" for first clock and "apb_pclk" for the
+               second one
+
+Optional properties:
+- interrupts:  Should specify WDT interrupt number
+- timeout-sec: Should specify default WDT timeout in seconds. If unset, the
+               default timeout is determined by the driver
 
 Example:
 	watchdog@66090000 {
 		compatible = "arm,sp805", "arm,primecell";
 		reg = <0x66090000 0x1000>;
 		interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&apb_pclk>,<&apb_pclk>;
-		clock-names = "wdogclk", "apb_pclk";
+		clocks = <&wdt_clk>, <&apb_pclk>;
+		clock-names = "wdog_clk", "apb_pclk";
 	};

Documentation/devicetree/bindings/watchdog/renesas-wdt.txt

@@ -16,6 +16,7 @@ Required properties:
 	         - "renesas,r8a7796-wdt" (R-Car M3-W)
 		 - "renesas,r8a77965-wdt" (R-Car M3-N)
 	         - "renesas,r8a77970-wdt" (R-Car V3M)
+	         - "renesas,r8a77990-wdt" (R-Car E3)
 	         - "renesas,r8a77995-wdt" (R-Car D3)
 	         - "renesas,r7s72100-wdt" (RZ/A1)
 		The generic compatible string must be:

Documentation/devicetree/bindings/watchdog/sp805-wdt.txt

-* ARM SP805 Watchdog Timer (WDT) Controller
-
-SP805 WDT is a ARM Primecell Peripheral and has a standard-id register that
-can be used to identify the peripheral type, vendor, and revision.
-This value can be used for driver matching.
-
-As SP805 WDT is a primecell IP, it follows the base bindings specified in
-'arm/primecell.txt'
-
-Required properties:
-- compatible : Should be "arm,sp805-wdt", "arm,primecell"
-- reg : Base address and size of the watchdog timer registers.
-- clocks : From common clock binding.
-           First clock is PCLK and the second is WDOGCLK.
-           WDOGCLK can be equal to or be a sub-multiple of the PCLK frequency.
-- clock-names : From common clock binding.
-                Shall be "apb_pclk" for first clock and "wdog_clk" for the
-                second one.
-
-Optional properties:
-- interrupts : Should specify WDT interrupt number.
-
-Examples:
-
-		cluster1_core0_watchdog: wdt@c000000 {
-			compatible = "arm,sp805-wdt", "arm,primecell";
-			reg = <0x0 0xc000000 0x0 0x1000>;
-			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
-			clock-names = "apb_pclk", "wdog_clk";
-		};
-

Documentation/devicetree/bindings/watchdog/st,stm32-iwdg.txt

@@ -2,9 +2,15 @@ STM32 Independent WatchDoG (IWDG)
 ---------------------------------
 
 Required properties:
-- compatible: "st,stm32-iwdg"
-- reg: physical base address and length of the registers set for the device
-- clocks: must contain a single entry describing the clock input
+- compatible: Should be either:
+  - "st,stm32-iwdg"
+  - "st,stm32mp1-iwdg"
+- reg: Physical base address and length of the registers set for the device
+- clocks: Reference to the clock entry lsi. Additional pclk clock entry
+  is required only for st,stm32mp1-iwdg.
+- clock-names: Name of the clocks used.
+  "lsi" for st,stm32-iwdg
+  "lsi", "pclk" for st,stm32mp1-iwdg
 
 Optional Properties:
 - timeout-sec: Watchdog timeout value in seconds.
@@ -15,5 +21,6 @@ iwdg: watchdog@40003000 {
 	compatible = "st,stm32-iwdg";
 	reg = <0x40003000 0x400>;
 	clocks = <&clk_lsi>;
+	clock-names = "lsi";
 	timeout-sec = <32>;
 };

MAINTAINERS

@@ -9427,6 +9427,12 @@ F:	drivers/leds/leds-menf21bmc.c
 F:	drivers/hwmon/menf21bmc_hwmon.c
 F:	Documentation/hwmon/menf21bmc
 
+MEN Z069 WATCHDOG DRIVER
+M:	Johannes Thumshirn <jth@kernel.org>
+L:	linux-watchdog@vger.kernel.org
+S:	Maintained
+F:	drivers/watchdog/menz069_wdt.c
+
 MESON AO CEC DRIVER FOR AMLOGIC SOCS
 M:	Neil Armstrong <narmstrong@baylibre.com>
 L:	linux-media@lists.freedesktop.org

drivers/watchdog/Kconfig

@@ -161,6 +161,16 @@ config MENF21BMC_WATCHDOG
 	  This driver can also be built as a module. If so the module
 	  will be called menf21bmc_wdt.
 
+config MENZ069_WATCHDOG
+	tristate "MEN 16Z069 Watchdog"
+	depends on MCB
+	select WATCHDOG_CORE
+	help
+	  Say Y here to include support for the MEN 16Z069 Watchdog.
+
+	  This driver can also be built as a module. If so the module
+	  will be called menz069_wdt.
+
 config TANGOX_WATCHDOG
 	tristate "Sigma Designs SMP86xx/SMP87xx watchdog"
 	select WATCHDOG_CORE

drivers/watchdog/Makefile

@@ -215,4 +215,5 @@ obj-$(CONFIG_MAX77620_WATCHDOG) += max77620_wdt.o
 obj-$(CONFIG_ZIIRAVE_WATCHDOG) += ziirave_wdt.o
 obj-$(CONFIG_SOFT_WATCHDOG) += softdog.o
 obj-$(CONFIG_MENF21BMC_WATCHDOG) += menf21bmc_wdt.o
+obj-$(CONFIG_MENZ069_WATCHDOG) += menz69_wdt.o
 obj-$(CONFIG_RAVE_SP_WATCHDOG) += rave-sp-wdt.o

drivers/watchdog/imx2_wdt.c

+// SPDX-License-Identifier: GPL-2.0
 /*
  * Watchdog driver for IMX2 and later processors
  *
@@ -7,10 +8,6 @@
  * some parts adapted by similar drivers from Darius Augulis and Vladimir
  * Zapolskiy, additional improvements by Wim Van Sebroeck.
  *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- *
  * NOTE: MX1 has a slightly different Watchdog than MX2 and later:
  *
  *			MX1:		MX2+:

drivers/watchdog/menz69_wdt.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Watchdog driver for the MEN z069 IP-Core
+ *
+ * Copyright (C) 2018 Johannes Thumshirn <jth@kernel.org>
+ */
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/mcb.h>
+#include <linux/module.h>
+#include <linux/watchdog.h>
+
+struct men_z069_drv {
+	struct watchdog_device wdt;
+	void __iomem *base;
+	struct resource *mem;
+};
+
+#define MEN_Z069_WTR			0x10
+#define MEN_Z069_WTR_WDEN		BIT(15)
+#define MEN_Z069_WTR_WDET_MASK		0x7fff
+#define MEN_Z069_WVR			0x14
+
+#define MEN_Z069_TIMER_FREQ		500 /* 500 Hz */
+#define MEN_Z069_WDT_COUNTER_MIN	1
+#define MEN_Z069_WDT_COUNTER_MAX	0x7fff
+#define MEN_Z069_DEFAULT_TIMEOUT	30
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+			    __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+static int men_z069_wdt_start(struct watchdog_device *wdt)
+{
+	struct men_z069_drv *drv = watchdog_get_drvdata(wdt);
+	u16 val;
+
+	val = readw(drv->base + MEN_Z069_WTR);
+	val |= MEN_Z069_WTR_WDEN;
+	writew(val, drv->base + MEN_Z069_WTR);
+
+	return 0;
+}
+
+static int men_z069_wdt_stop(struct watchdog_device *wdt)
+{
+	struct men_z069_drv *drv = watchdog_get_drvdata(wdt);
+	u16 val;
+
+	val = readw(drv->base + MEN_Z069_WTR);
+	val &= ~MEN_Z069_WTR_WDEN;
+	writew(val, drv->base + MEN_Z069_WTR);
+
+	return 0;
+}
+
+static int men_z069_wdt_ping(struct watchdog_device *wdt)
+{
+	struct men_z069_drv *drv = watchdog_get_drvdata(wdt);
+	u16 val;
+
+	/* The watchdog trigger value toggles between 0x5555 and 0xaaaa */
+	val = readw(drv->base + MEN_Z069_WVR);
+	val ^= 0xffff;
+	writew(val, drv->base + MEN_Z069_WVR);
+
+	return 0;
+}
+
+static int men_z069_wdt_set_timeout(struct watchdog_device *wdt,
+				    unsigned int timeout)
+{
+	struct men_z069_drv *drv = watchdog_get_drvdata(wdt);
+	u16 reg, val, ena;
+
+	wdt->timeout = timeout;
+	val = timeout * MEN_Z069_TIMER_FREQ;
+
+	reg = readw(drv->base + MEN_Z069_WVR);
+	ena = reg & MEN_Z069_WTR_WDEN;
+	reg = ena | val;
+	writew(reg, drv->base + MEN_Z069_WTR);
+
+	return 0;
+}
+
+static const struct watchdog_info men_z069_info = {
+	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
+	.identity = "MEN z069 Watchdog",
+};
+
+static const struct watchdog_ops men_z069_ops = {
+	.owner = THIS_MODULE,
+	.start = men_z069_wdt_start,
+	.stop = men_z069_wdt_stop,
+	.ping = men_z069_wdt_ping,
+	.set_timeout = men_z069_wdt_set_timeout,
+};
+
+static struct watchdog_device men_z069_wdt = {
+	.info = &men_z069_info,
+	.ops = &men_z069_ops,
+	.timeout = MEN_Z069_DEFAULT_TIMEOUT,
+	.min_timeout = 1,
+	.max_timeout = MEN_Z069_WDT_COUNTER_MAX / MEN_Z069_TIMER_FREQ,
+};
+
+static int men_z069_probe(struct mcb_device *dev,
+			  const struct mcb_device_id *id)
+{
+	struct men_z069_drv *drv;
+	struct resource *mem;
+
+	drv = devm_kzalloc(&dev->dev, sizeof(struct men_z069_drv), GFP_KERNEL);
+	if (!drv)
+		return -ENOMEM;
+
+	mem = mcb_request_mem(dev, "z069-wdt");
+	if (IS_ERR(mem))
+		return PTR_ERR(mem);
+
+	drv->base = devm_ioremap(&dev->dev, mem->start, resource_size(mem));
+	if (drv->base == NULL)
+		goto release_mem;
+
+	drv->mem = mem;
+
+	drv->wdt = men_z069_wdt;
+	watchdog_init_timeout(&drv->wdt, 0, &dev->dev);
+	watchdog_set_nowayout(&drv->wdt, nowayout);
+	watchdog_set_drvdata(&drv->wdt, drv);
+	drv->wdt.parent = &dev->dev;
+	mcb_set_drvdata(dev, drv);
+
+	return watchdog_register_device(&men_z069_wdt);
+
+release_mem:
+	mcb_release_mem(mem);
+	return -ENOMEM;
+}
+
+static void men_z069_remove(struct mcb_device *dev)
+{
+	struct men_z069_drv *drv = mcb_get_drvdata(dev);
+
+	watchdog_unregister_device(&drv->wdt);
+	mcb_release_mem(drv->mem);
+}
+
+static const struct mcb_device_id men_z069_ids[] = {
+	{ .device = 0x45 },
+	{ }
+};
+MODULE_DEVICE_TABLE(mcb, men_z069_ids);
+
+static struct mcb_driver men_z069_driver = {
+	.driver = {
+		.name = "z069-wdt",
+		.owner = THIS_MODULE,
+	},
+	.probe = men_z069_probe,
+	.remove = men_z069_remove,
+	.id_table = men_z069_ids,
+};
+module_mcb_driver(men_z069_driver);
+
+MODULE_AUTHOR("Johannes Thumshirn <jth@kernel.org>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("mcb:16z069");

drivers/watchdog/orion_wdt.c

@@ -581,6 +581,8 @@ static int orion_wdt_probe(struct platform_device *pdev)
 	 */
 	if (!orion_wdt_enabled(&dev->wdt))
 		orion_wdt_stop(&dev->wdt);
+	else
+		set_bit(WDOG_HW_RUNNING, &dev->wdt.status);
 
 	/* Request the IRQ only after the watchdog is disabled */
 	irq = platform_get_irq(pdev, 0);

drivers/watchdog/sp805_wdt.c

@@ -11,6 +11,7 @@
  * warranty of any kind, whether express or implied.
  */
 
+#include <linux/acpi.h>
 #include <linux/device.h>
 #include <linux/resource.h>
 #include <linux/amba/bus.h>
@@ -22,6 +23,7 @@
 #include <linux/math64.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
+#include <linux/of.h>
 #include <linux/pm.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
@@ -42,6 +44,7 @@
 	/* control register masks */
 	#define	INT_ENABLE	(1 << 0)
 	#define	RESET_ENABLE	(1 << 1)
+	#define	ENABLE_MASK	(INT_ENABLE | RESET_ENABLE)
 #define WDTINTCLR		0x00C
 #define WDTRIS			0x010
 #define WDTMIS			0x014
@@ -65,6 +68,7 @@ struct sp805_wdt {
 	spinlock_t			lock;
 	void __iomem			*base;
 	struct clk			*clk;
+	u64				rate;
 	struct amba_device		*adev;
 	unsigned int			load_val;
 };
@@ -74,13 +78,22 @@ module_param(nowayout, bool, 0);
 MODULE_PARM_DESC(nowayout,
 		"Set to 1 to keep watchdog running after device release");
 
+/* returns true if wdt is running; otherwise returns false */
+static bool wdt_is_running(struct watchdog_device *wdd)
+{
+	struct sp805_wdt *wdt = watchdog_get_drvdata(wdd);
+	u32 wdtcontrol = readl_relaxed(wdt->base + WDTCONTROL);
+
+	return (wdtcontrol & ENABLE_MASK) == ENABLE_MASK;
+}
+
 /* This routine finds load value that will reset system in required timout */
 static int wdt_setload(struct watchdog_device *wdd, unsigned int timeout)
 {
 	struct sp805_wdt *wdt = watchdog_get_drvdata(wdd);
 	u64 load, rate;
 
-	rate = clk_get_rate(wdt->clk);
+	rate = wdt->rate;
 
 	/*
 	 * sp805 runs counter with given value twice, after the end of first
@@ -106,9 +119,7 @@ static int wdt_setload(struct watchdog_device *wdd, unsigned int timeout)
 static unsigned int wdt_timeleft(struct watchdog_device *wdd)
 {
 	struct sp805_wdt *wdt = watchdog_get_drvdata(wdd);
-	u64 load, rate;
-
-	rate = clk_get_rate(wdt->clk);
+	u64 load;
 
 	spin_lock(&wdt->lock);
 	load = readl_relaxed(wdt->base + WDTVALUE);
@@ -118,7 +129,7 @@ static unsigned int wdt_timeleft(struct watchdog_device *wdd)
 		load += wdt->load_val + 1;
 	spin_unlock(&wdt->lock);
 
-	return div_u64(load, rate);
+	return div_u64(load, wdt->rate);
 }
 
 static int
@@ -228,11 +239,25 @@ sp805_wdt_probe(struct amba_device *adev, const struct amba_id *id)
 	if (IS_ERR(wdt->base))
 		return PTR_ERR(wdt->base);
 
-	wdt->clk = devm_clk_get(&adev->dev, NULL);
-	if (IS_ERR(wdt->clk)) {
-		dev_warn(&adev->dev, "Clock not found\n");
-		ret = PTR_ERR(wdt->clk);
-		goto err;
+	if (adev->dev.of_node) {
+		wdt->clk = devm_clk_get(&adev->dev, NULL);
+		if (IS_ERR(wdt->clk)) {
+			dev_err(&adev->dev, "Clock not found\n");
+			return PTR_ERR(wdt->clk);
+		}
+		wdt->rate = clk_get_rate(wdt->clk);
+	} else if (has_acpi_companion(&adev->dev)) {
+		/*
+		 * When Driver probe with ACPI device, clock devices
+		 * are not available, so watchdog rate get from
+		 * clock-frequency property given in _DSD object.
+		 */
+		device_property_read_u64(&adev->dev, "clock-frequency",
+					 &wdt->rate);
+		if (!wdt->rate) {
+			dev_err(&adev->dev, "no clock-frequency property\n");
+			return -ENODEV;
+		}
 	}
 
 	wdt->adev = adev;
@@ -244,7 +269,23 @@ sp805_wdt_probe(struct amba_device *adev, const struct amba_id *id)
 	watchdog_set_nowayout(&wdt->wdd, nowayout);
 	watchdog_set_drvdata(&wdt->wdd, wdt);
 	watchdog_set_restart_priority(&wdt->wdd, 128);
-	wdt_setload(&wdt->wdd, DEFAULT_TIMEOUT);
+
+	/*
+	 * If 'timeout-sec' devicetree property is specified, use that.
+	 * Otherwise, use DEFAULT_TIMEOUT
+	 */
+	wdt->wdd.timeout = DEFAULT_TIMEOUT;
+	watchdog_init_timeout(&wdt->wdd, 0, &adev->dev);
+	wdt_setload(&wdt->wdd, wdt->wdd.timeout);
+
+	/*
+	 * If HW is already running, enable/reset the wdt and set the running
+	 * bit to tell the wdt subsystem
+	 */
+	if (wdt_is_running(&wdt->wdd)) {
+		wdt_enable(&wdt->wdd);
+		set_bit(WDOG_HW_RUNNING, &wdt->wdd.status);
+	}
 
 	ret = watchdog_register_device(&wdt->wdd);
 	if (ret) {

drivers/watchdog/sprd_wdt.c

@@ -279,10 +279,8 @@ static int sprd_wdt_probe(struct platform_device *pdev)
 
 	wdt_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	wdt->base = devm_ioremap_resource(&pdev->dev, wdt_res);
-	if (IS_ERR(wdt->base)) {
-		dev_err(&pdev->dev, "failed to map memory resource\n");
+	if (IS_ERR(wdt->base))
 		return PTR_ERR(wdt->base);
-	}
 
 	wdt->enable = devm_clk_get(&pdev->dev, "enable");
 	if (IS_ERR(wdt->enable)) {

drivers/watchdog/stm32_iwdg.c

@@ -11,12 +11,13 @@
 
 #include <linux/clk.h>
 #include <linux/delay.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/of.h>
+#include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/watchdog.h>
 
@@ -54,11 +55,15 @@
 #define TIMEOUT_US	100000
 #define SLEEP_US	1000
 
+#define HAS_PCLK	true
+
 struct stm32_iwdg {
 	struct watchdog_device	wdd;
 	void __iomem		*regs;
-	struct clk		*clk;
+	struct clk		*clk_lsi;
+	struct clk		*clk_pclk;
 	unsigned int		rate;
+	bool			has_pclk;
 };
 
 static inline u32 reg_read(void __iomem *base, u32 reg)
@@ -133,6 +138,44 @@ static int stm32_iwdg_set_timeout(struct watchdog_device *wdd,
 	return 0;
 }
 
+static int stm32_iwdg_clk_init(struct platform_device *pdev,
+			       struct stm32_iwdg *wdt)
+{
+	u32 ret;
+
+	wdt->clk_lsi = devm_clk_get(&pdev->dev, "lsi");
+	if (IS_ERR(wdt->clk_lsi)) {
+		dev_err(&pdev->dev, "Unable to get lsi clock\n");
+		return PTR_ERR(wdt->clk_lsi);
+	}
+
+	/* optional peripheral clock */
+	if (wdt->has_pclk) {
+		wdt->clk_pclk = devm_clk_get(&pdev->dev, "pclk");
+		if (IS_ERR(wdt->clk_pclk)) {
+			dev_err(&pdev->dev, "Unable to get pclk clock\n");
+			return PTR_ERR(wdt->clk_pclk);
+		}
+
+		ret = clk_prepare_enable(wdt->clk_pclk);
+		if (ret) {
+			dev_err(&pdev->dev, "Unable to prepare pclk clock\n");
+			return ret;
+		}
+	}
+
+	ret = clk_prepare_enable(wdt->clk_lsi);
+	if (ret) {
+		dev_err(&pdev->dev, "Unable to prepare lsi clock\n");
+		clk_disable_unprepare(wdt->clk_pclk);
+		return ret;
+	}
+
+	wdt->rate = clk_get_rate(wdt->clk_lsi);
+
+	return 0;
+}
+
 static const struct watchdog_info stm32_iwdg_info = {
 	.options	= WDIOF_SETTIMEOUT |
 			  WDIOF_MAGICCLOSE |
@@ -147,49 +190,42 @@ static const struct watchdog_ops stm32_iwdg_ops = {
 	.set_timeout	= stm32_iwdg_set_timeout,
 };
 
+static const struct of_device_id stm32_iwdg_of_match[] = {
+	{ .compatible = "st,stm32-iwdg", .data = (void *)!HAS_PCLK },
+	{ .compatible = "st,stm32mp1-iwdg", .data = (void *)HAS_PCLK },
+	{ /* end node */ }
+};
+MODULE_DEVICE_TABLE(of, stm32_iwdg_of_match);
+
 static int stm32_iwdg_probe(struct platform_device *pdev)
 {
 	struct watchdog_device *wdd;
+	const struct of_device_id *match;
 	struct stm32_iwdg *wdt;
 	struct resource *res;
-	void __iomem *regs;
-	struct clk *clk;
 	int ret;
 
+	match = of_match_device(stm32_iwdg_of_match, &pdev->dev);
+	if (!match)
+		return -ENODEV;
+
+	wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
+	if (!wdt)
+		return -ENOMEM;
+
+	wdt->has_pclk = match->data;
+
 	/* This is the timer base. */
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	regs = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(regs)) {
+	wdt->regs = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(wdt->regs)) {
 		dev_err(&pdev->dev, "Could not get resource\n");
-		return PTR_ERR(regs);
+		return PTR_ERR(wdt->regs);
 	}
 
-	clk = devm_clk_get(&pdev->dev, NULL);
-	if (IS_ERR(clk)) {
-		dev_err(&pdev->dev, "Unable to get clock\n");
-		return PTR_ERR(clk);
-	}
-
-	ret = clk_prepare_enable(clk);
-	if (ret) {
-		dev_err(&pdev->dev, "Unable to prepare clock %p\n", clk);
+	ret = stm32_iwdg_clk_init(pdev, wdt);
+	if (ret)
 		return ret;
-	}
-
-	/*
-	 * Allocate our watchdog driver data, which has the
-	 * struct watchdog_device nested within it.
-	 */
-	wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
-	if (!wdt) {
-		ret = -ENOMEM;
-		goto err;
-	}
-
-	/* Initialize struct stm32_iwdg. */
-	wdt->regs = regs;
-	wdt->clk = clk;
-	wdt->rate = clk_get_rate(clk);
 
 	/* Initialize struct watchdog_device. */
 	wdd = &wdt->wdd;
@@ -217,7 +253,8 @@ static int stm32_iwdg_probe(struct platform_device *pdev)
 
 	return 0;
 err:
-	clk_disable_unprepare(clk);
+	clk_disable_unprepare(wdt->clk_lsi);
+	clk_disable_unprepare(wdt->clk_pclk);
 
 	return ret;
 }
@@ -227,23 +264,18 @@ static int stm32_iwdg_remove(struct platform_device *pdev)
 	struct stm32_iwdg *wdt = platform_get_drvdata(pdev);
 
 	watchdog_unregister_device(&wdt->wdd);
-	clk_disable_unprepare(wdt->clk);
+	clk_disable_unprepare(wdt->clk_lsi);
+	clk_disable_unprepare(wdt->clk_pclk);
 
 	return 0;
 }
 
-static const struct of_device_id stm32_iwdg_of_match[] = {
-	{ .compatible = "st,stm32-iwdg" },
-	{ /* end node */ }
-};
-MODULE_DEVICE_TABLE(of, stm32_iwdg_of_match);
-
 static struct platform_driver stm32_iwdg_driver = {
 	.probe		= stm32_iwdg_probe,
 	.remove		= stm32_iwdg_remove,
 	.driver = {
 		.name	= "iwdg",
-		.of_match_table = stm32_iwdg_of_match,
+		.of_match_table = of_match_ptr(stm32_iwdg_of_match),
 	},
 };
 module_platform_driver(stm32_iwdg_driver);

drivers/watchdog/stmp3xxx_rtc_wdt.c

+// SPDX-License-Identifier: GPL-2.0
 /*
  * Watchdog driver for the RTC based watchdog in STMP3xxx and i.MX23/28
  *
  * Author: Wolfram Sang <kernel@pengutronix.de>
  *
  * Copyright (C) 2011-12 Wolfram Sang, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
  */
 #include <linux/kernel.h>
 #include <linux/module.h>