cciss: remove overlapping PCI IDs

This patch removes the controller overlap between cciss and hpsa. It was
decided that no overlap should exist. All new controllers will use the hpsa
SCSI based driver.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

drivers/block/cciss.c

@@ -66,11 +66,6 @@ MODULE_VERSION("3.6.26");
 MODULE_LICENSE("GPL");
 
 static DEFINE_MUTEX(cciss_mutex);
-static int cciss_allow_hpsa;
-module_param(cciss_allow_hpsa, int, S_IRUGO|S_IWUSR);
-MODULE_PARM_DESC(cciss_allow_hpsa,
-	"Prevent cciss driver from accessing hardware known to be "
-	" supported by the hpsa driver");
 
 #include "cciss_cmd.h"
 #include "cciss.h"
@@ -98,19 +93,6 @@ static const struct pci_device_id cciss_pci_device_id[] = {
 	{PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSD,     0x103C, 0x3215},
 	{PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSC,     0x103C, 0x3237},
 	{PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSC,     0x103C, 0x323D},
-	{PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSE,     0x103C, 0x3241},
-	{PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSE,     0x103C, 0x3243},
-	{PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSE,     0x103C, 0x3245},
-	{PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSE,     0x103C, 0x3247},
-	{PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSE,     0x103C, 0x3249},
-	{PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSE,     0x103C, 0x324A},
-	{PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSE,     0x103C, 0x324B},
-	{PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSF,     0x103C, 0x3350},
-	{PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSF,     0x103C, 0x3351},
-	{PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSF,     0x103C, 0x3352},
-	{PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSF,     0x103C, 0x3353},
-	{PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSF,     0x103C, 0x3354},
-	{PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSF,     0x103C, 0x3355},
 	{0,}
 };
 
@@ -138,24 +120,9 @@ static struct board_type products[] = {
 	{0x3214103C, "Smart Array E200i", &SA5_access},
 	{0x3215103C, "Smart Array E200i", &SA5_access},
 	{0x3237103C, "Smart Array E500", &SA5_access},
-/* controllers below this line are also supported by the hpsa driver. */
-#define HPSA_BOUNDARY 0x3223103C
 	{0x3223103C, "Smart Array P800", &SA5_access},
 	{0x3234103C, "Smart Array P400", &SA5_access},
 	{0x323D103C, "Smart Array P700m", &SA5_access},
-	{0x3241103C, "Smart Array P212", &SA5_access},
-	{0x3243103C, "Smart Array P410", &SA5_access},
-	{0x3245103C, "Smart Array P410i", &SA5_access},
-	{0x3247103C, "Smart Array P411", &SA5_access},
-	{0x3249103C, "Smart Array P812", &SA5_access},
-	{0x324A103C, "Smart Array P712m", &SA5_access},
-	{0x324B103C, "Smart Array P711m", &SA5_access},
-	{0x3350103C, "Smart Array", &SA5_access},
-	{0x3351103C, "Smart Array", &SA5_access},
-	{0x3352103C, "Smart Array", &SA5_access},
-	{0x3353103C, "Smart Array", &SA5_access},
-	{0x3354103C, "Smart Array", &SA5_access},
-	{0x3355103C, "Smart Array", &SA5_access},
 };
 
 /* How long to wait (in milliseconds) for board to go into simple mode */
@@ -3971,9 +3938,6 @@ static int __devinit cciss_lookup_board_id(struct pci_dev *pdev, u32 *board_id)
 			subsystem_vendor_id;
 
 	for (i = 0; i < ARRAY_SIZE(products); i++) {
-		/* Stand aside for hpsa driver on request */
-		if (cciss_allow_hpsa && products[i].board_id == HPSA_BOUNDARY)
-			return -ENODEV;
 		if (*board_id == products[i].board_id)
 			return i;
 	}