Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "A first set of batches of fixes for 3.13.  The diffstat is large
  mostly because we're adding a defconfig for a family that's been
  lacking it, and there's some missing clock information added for i.MX
  and OMAP.

  The at91 new code is around dealing with RTC/RTT reset at boot to fix
  possible hangs due to pending wakeup interrupts coming in during early
  boot"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (29 commits)
  ARM: OMAP2+: Fix build for dra7xx without omap4 and 5
  ARM: OMAP2+: omap_device: maintain sane runtime pm status around suspend/resume
  doc: devicetree: Add bindings documentation for omap-des driver
  ARM: dts: doc: Document missing compatible property for omap-sham driver
  ARM: OMAP3: Beagle: fix return value check in beagle_opp_init()
  ARM: at91: fix hanged boot due to early rtt-interrupt
  ARM: at91: fix hanged boot due to early rtc-interrupt
  video: exynos_mipi_dsim: Remove unused variable
  ARM: highbank: only select errata 764369 if SMP
  ARM: sti: only select errata 764369 if SMP
  ARM: tegra: init fuse before setting reset handler
  ARM: vt8500: add defconfig for v6/v7 chips
  ARM: integrator_cp: Set LCD{0,1} enable lines when turning on CLCD
  ARM: OMAP: devicetree: fix SPI node compatible property syntax items
  pinctrl: single: call pcs_soc->rearm() whenever IRQ mask is changed
  ARM: OMAP2+: smsc911x: fix return value check in gpmc_smsc911x_init()
  MAINTAINERS: drop discontinued mailing list
  ARM: dts: i.MX51: Fix OTG PHY clock
  ARM: imx: set up pllv3 POWER and BYPASS sequentially
  ARM: imx: pllv3 needs relock in .set_rate() call
  ...

Documentation/devicetree/bindings/crypto/omap-des.txt

+OMAP SoC DES crypto Module
+
+Required properties:
+
+- compatible : Should contain "ti,omap4-des"
+- ti,hwmods: Name of the hwmod associated with the DES module
+- reg : Offset and length of the register set for the module
+- interrupts : the interrupt-specifier for the DES module
+- clocks : A phandle to the functional clock node of the DES module
+           corresponding to each entry in clock-names
+- clock-names : Name of the functional clock, should be "fck"
+
+Optional properties:
+- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
+	Documentation/devicetree/bindings/dma/dma.txt
+	Each entry corresponds to an entry in dma-names
+- dma-names: DMA request names should include "tx" and "rx" if present
+
+Example:
+	/* DRA7xx SoC */
+	des: des@480a5000 {
+		compatible = "ti,omap4-des";
+		ti,hwmods = "des";
+		reg = <0x480a5000 0xa0>;
+		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+		dmas = <&sdma 117>, <&sdma 116>;
+		dma-names = "tx", "rx";
+		clocks = <&l3_iclk_div>;
+		clock-names = "fck";
+	};

Documentation/devicetree/bindings/crypto/omap-sham.txt

@@ -6,7 +6,7 @@ Required properties:
   SHAM versions:
   - "ti,omap2-sham" for OMAP2 & OMAP3.
   - "ti,omap4-sham" for OMAP4 and AM33XX.
-  Note that these two versions are incompatible.
+  - "ti,omap5-sham" for OMAP5, DRA7 and AM43XX.
 - ti,hwmods: Name of the hwmod associated with the SHAM module
 - reg : Offset and length of the register set for the module
 - interrupts : the interrupt-specifier for the SHAM module.

Documentation/devicetree/bindings/spi/omap-spi.txt

@@ -2,8 +2,8 @@ OMAP2+ McSPI device
 
 Required properties:
 - compatible :
-  - "ti,omap2-spi" for OMAP2 & OMAP3.
-  - "ti,omap4-spi" for OMAP4+.
+  - "ti,omap2-mcspi" for OMAP2 & OMAP3.
+  - "ti,omap4-mcspi" for OMAP4+.
 - ti,spi-num-cs : Number of chipselect supported  by the instance.
 - ti,hwmods: Name of the hwmod associated to the McSPI
 - ti,pindir-d0-out-d1-in: Select the D0 pin as output and D1 as

MAINTAINERS

@@ -1070,7 +1070,6 @@ S:	Maintained
 ARM/NOMADIK ARCHITECTURE
 M:	Alessandro Rubini <rubini@unipv.it>
 M:	Linus Walleij <linus.walleij@linaro.org>
-M:	STEricsson <STEricsson_nomadik_linux@list.st.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/mach-nomadik/

arch/arm/boot/dts/imx51.dtsi

@@ -190,7 +190,7 @@ esdhc4: esdhc@70024000 {
 
 			usbphy0: usbphy@0 {
 				compatible = "usb-nop-xceiv";
-				clocks = <&clks 124>;
+				clocks = <&clks 75>;
 				clock-names = "main_clk";
 				status = "okay";
 			};

arch/arm/configs/vt8500_v6_v7_defconfig

+CONFIG_IRQ_DOMAIN_DEBUG=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_ARCH_MULTI_V6=y
+CONFIG_ARCH_WM8750=y
+CONFIG_ARCH_WM8850=y
+CONFIG_ARM_ERRATA_720789=y
+CONFIG_ARM_ERRATA_754322=y
+CONFIG_ARM_ERRATA_775420=y
+CONFIG_HAVE_ARM_ARCH_TIMER=y
+CONFIG_AEABI=y
+CONFIG_HIGHMEM=y
+CONFIG_HIGHPTE=y
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
+CONFIG_VFP=y
+CONFIG_NEON=y
+CONFIG_PM_RUNTIME=y
+CONFIG_NET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_PROC_DEVICETREE=y
+CONFIG_EEPROM_93CX6=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_NETDEVICES=y
+# CONFIG_NET_CADENCE is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CIRRUS is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+CONFIG_VIA_VELOCITY=y
+# CONFIG_NET_VENDOR_WIZNET is not set
+CONFIG_PHYLIB=y
+CONFIG_INPUT_MATRIXKMAP=y
+CONFIG_SERIAL_VT8500=y
+CONFIG_SERIAL_VT8500_CONSOLE=y
+CONFIG_I2C=y
+CONFIG_I2C_WMT=y
+CONFIG_PINCTRL_SINGLE=y
+CONFIG_PINCTRL_WM8750=y
+CONFIG_GPIO_GENERIC_PLATFORM=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_POWER_RESET=y
+CONFIG_MFD_SYSCON=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_GPIO=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
+CONFIG_USB_UHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_NOP_USB_XCEIV=y
+CONFIG_USB_GPIO_VBUS=y
+CONFIG_USB_ULPI=y
+CONFIG_MMC=y
+CONFIG_MMC_DEBUG=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_VT8500=y
+CONFIG_DMADEVICES=y
+CONFIG_COMMON_CLK_DEBUG=y
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_PWM=y
+CONFIG_PWM_VT8500=y
+CONFIG_RESET_CONTROLLER=y
+CONFIG_GENERIC_PHY=y
+CONFIG_EXT4_FS=y
+CONFIG_TMPFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOCKUP_DETECTOR=y

arch/arm/mach-at91/Makefile

@@ -2,7 +2,7 @@
 # Makefile for the linux kernel.
 #
 
-obj-y		:= irq.o gpio.o setup.o
+obj-y		:= irq.o gpio.o setup.o sysirq_mask.o
 obj-m		:=
 obj-n		:=
 obj-		:=

arch/arm/mach-at91/at91sam9260.c

@@ -351,6 +351,8 @@ static void __init at91sam9260_initialize(void)
 	arm_pm_idle = at91sam9_idle;
 	arm_pm_restart = at91sam9_alt_restart;
 
+	at91_sysirq_mask_rtt(AT91SAM9260_BASE_RTT);
+
 	/* Register GPIO subsystem */
 	at91_gpio_init(at91sam9260_gpio, 3);
 }

arch/arm/mach-at91/at91sam9261.c

@@ -293,6 +293,8 @@ static void __init at91sam9261_initialize(void)
 	arm_pm_idle = at91sam9_idle;
 	arm_pm_restart = at91sam9_alt_restart;
 
+	at91_sysirq_mask_rtt(AT91SAM9261_BASE_RTT);
+
 	/* Register GPIO subsystem */
 	at91_gpio_init(at91sam9261_gpio, 3);
 }

arch/arm/mach-at91/at91sam9263.c

@@ -330,6 +330,9 @@ static void __init at91sam9263_initialize(void)
 	arm_pm_idle = at91sam9_idle;
 	arm_pm_restart = at91sam9_alt_restart;
 
+	at91_sysirq_mask_rtt(AT91SAM9263_BASE_RTT0);
+	at91_sysirq_mask_rtt(AT91SAM9263_BASE_RTT1);
+
 	/* Register GPIO subsystem */
 	at91_gpio_init(at91sam9263_gpio, 5);
 }

arch/arm/mach-at91/at91sam9g45.c

@@ -379,6 +379,9 @@ static void __init at91sam9g45_initialize(void)
 	arm_pm_idle = at91sam9_idle;
 	arm_pm_restart = at91sam9g45_restart;
 
+	at91_sysirq_mask_rtc(AT91SAM9G45_BASE_RTC);
+	at91_sysirq_mask_rtt(AT91SAM9G45_BASE_RTT);
+
 	/* Register GPIO subsystem */
 	at91_gpio_init(at91sam9g45_gpio, 5);
 }

arch/arm/mach-at91/at91sam9n12.c

@@ -224,7 +224,13 @@ static void __init at91sam9n12_map_io(void)
 	at91_init_sram(0, AT91SAM9N12_SRAM_BASE, AT91SAM9N12_SRAM_SIZE);
 }
 
+static void __init at91sam9n12_initialize(void)
+{
+	at91_sysirq_mask_rtc(AT91SAM9N12_BASE_RTC);
+}
+
 AT91_SOC_START(at91sam9n12)
 	.map_io = at91sam9n12_map_io,
 	.register_clocks = at91sam9n12_register_clocks,
+	.init = at91sam9n12_initialize,
 AT91_SOC_END

arch/arm/mach-at91/at91sam9rl.c

@@ -296,6 +296,9 @@ static void __init at91sam9rl_initialize(void)
 	arm_pm_idle = at91sam9_idle;
 	arm_pm_restart = at91sam9_alt_restart;
 
+	at91_sysirq_mask_rtc(AT91SAM9RL_BASE_RTC);
+	at91_sysirq_mask_rtt(AT91SAM9RL_BASE_RTT);
+
 	/* Register GPIO subsystem */
 	at91_gpio_init(at91sam9rl_gpio, 4);
 }

arch/arm/mach-at91/at91sam9x5.c

@@ -322,6 +322,11 @@ static void __init at91sam9x5_map_io(void)
 	at91_init_sram(0, AT91SAM9X5_SRAM_BASE, AT91SAM9X5_SRAM_SIZE);
 }
 
+static void __init at91sam9x5_initialize(void)
+{
+	at91_sysirq_mask_rtc(AT91SAM9X5_BASE_RTC);
+}
+
 /* --------------------------------------------------------------------
  *  Interrupt initialization
  * -------------------------------------------------------------------- */
@@ -329,4 +334,5 @@ static void __init at91sam9x5_map_io(void)
 AT91_SOC_START(at91sam9x5)
 	.map_io = at91sam9x5_map_io,
 	.register_clocks = at91sam9x5_register_clocks,
+	.init = at91sam9x5_initialize,
 AT91_SOC_END

arch/arm/mach-at91/generic.h

@@ -34,6 +34,8 @@ extern int  __init at91_aic_of_init(struct device_node *node,
 				    struct device_node *parent);
 extern int  __init at91_aic5_of_init(struct device_node *node,
 				    struct device_node *parent);
+extern void __init at91_sysirq_mask_rtc(u32 rtc_base);
+extern void __init at91_sysirq_mask_rtt(u32 rtt_base);
 
 
  /* Timer */

arch/arm/mach-at91/include/mach/at91sam9n12.h

@@ -48,6 +48,11 @@
 #define AT91SAM9N12_BASE_USART2	0xf8024000
 #define AT91SAM9N12_BASE_USART3	0xf8028000
 
+/*
+ * System Peripherals
+ */
+#define AT91SAM9N12_BASE_RTC	0xfffffeb0
+
 /*
  * Internal Memory.
  */

arch/arm/mach-at91/include/mach/at91sam9x5.h

@@ -54,6 +54,11 @@
 #define AT91SAM9X5_BASE_USART1	0xf8020000
 #define AT91SAM9X5_BASE_USART2	0xf8024000
 
+/*
+ * System Peripherals
+ */
+#define AT91SAM9X5_BASE_RTC	0xfffffeb0
+
 /*
  * Internal Memory.
  */

arch/arm/mach-at91/include/mach/sama5d3.h

@@ -72,6 +72,11 @@
 #define SAMA5D3_BASE_USART2	0xf8020000
 #define SAMA5D3_BASE_USART3	0xf8024000
 
+/*
+ * System Peripherals
+ */
+#define SAMA5D3_BASE_RTC	0xfffffeb0
+
 /*
  * Internal Memory
  */

arch/arm/mach-at91/sama5d3.c

@@ -371,7 +371,13 @@ static void __init sama5d3_map_io(void)
 	at91_init_sram(0, SAMA5D3_SRAM_BASE, SAMA5D3_SRAM_SIZE);
 }
 
+static void __init sama5d3_initialize(void)
+{
+	at91_sysirq_mask_rtc(SAMA5D3_BASE_RTC);
+}
+
 AT91_SOC_START(sama5d3)
 	.map_io = sama5d3_map_io,
 	.register_clocks = sama5d3_register_clocks,
+	.init = sama5d3_initialize,
 AT91_SOC_END

arch/arm/mach-at91/sysirq_mask.c

+/*
+ * sysirq_mask.c - System-interrupt masking
+ *
+ * Copyright (C) 2013 Johan Hovold <jhovold@gmail.com>
+ *
+ * Functions to disable system interrupts from backup-powered peripherals.
+ *
+ * The RTC and RTT-peripherals are generally powered by backup power (VDDBU)
+ * and are not reset on wake-up, user, watchdog or software reset. This means
+ * that their interrupts may be enabled during early boot (e.g. after a user
+ * reset).
+ *
+ * As the RTC and RTT share the system-interrupt line with the PIT, an
+ * interrupt occurring before a handler has been installed would lead to the
+ * system interrupt being disabled and prevent the system from booting.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/io.h>
+#include <mach/at91_rtt.h>
+
+#include "generic.h"
+
+#define AT91_RTC_IDR	0x24	/* Interrupt Disable Register */
+#define AT91_RTC_IMR	0x28	/* Interrupt Mask Register */
+
+void __init at91_sysirq_mask_rtc(u32 rtc_base)
+{
+	void __iomem *base;
+	u32 mask;
+
+	base = ioremap(rtc_base, 64);
+	if (!base)
+		return;
+
+	mask = readl_relaxed(base + AT91_RTC_IMR);
+	if (mask) {
+		pr_info("AT91: Disabling rtc irq\n");
+		writel_relaxed(mask, base + AT91_RTC_IDR);
+		(void)readl_relaxed(base + AT91_RTC_IMR);	/* flush */
+	}
+
+	iounmap(base);
+}
+
+void __init at91_sysirq_mask_rtt(u32 rtt_base)
+{
+	void __iomem *base;
+	void __iomem *reg;
+	u32 mode;
+
+	base = ioremap(rtt_base, 16);
+	if (!base)
+		return;
+
+	reg = base + AT91_RTT_MR;
+
+	mode = readl_relaxed(reg);
+	if (mode & (AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN)) {
+		pr_info("AT91: Disabling rtt irq\n");
+		mode &= ~(AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN);
+		writel_relaxed(mode, reg);
+		(void)readl_relaxed(reg);			/* flush */
+	}
+
+	iounmap(base);
+}

arch/arm/mach-highbank/Kconfig

@@ -7,7 +7,7 @@ config ARCH_HIGHBANK
 	select ARCH_SUPPORTS_BIG_ENDIAN
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_AMBA
-	select ARM_ERRATA_764369
+	select ARM_ERRATA_764369 if SMP
 	select ARM_ERRATA_775420
 	select ARM_ERRATA_798181 if SMP
 	select ARM_GIC

arch/arm/mach-imx/Makefile

@@ -102,8 +102,8 @@ obj-$(CONFIG_SOC_IMX6SL) += clk-imx6sl.o mach-imx6sl.o
 
 ifeq ($(CONFIG_PM),y)
 obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o headsmp.o
-# i.MX6SL reuses pm-imx6q.c
-obj-$(CONFIG_SOC_IMX6SL) += pm-imx6q.o
+# i.MX6SL reuses i.MX6Q code
+obj-$(CONFIG_SOC_IMX6SL) += pm-imx6q.o headsmp.o
 endif
 
 # i.MX5 based machines

arch/arm/mach-imx/clk-imx6q.c

@@ -122,13 +122,14 @@ static struct clk_div_table clk_enet_ref_table[] = {
 	{ .val = 1, .div = 10, },
 	{ .val = 2, .div = 5, },
 	{ .val = 3, .div = 4, },
+	{ /* sentinel */ }
 };
 
 static struct clk_div_table post_div_table[] = {
 	{ .val = 2, .div = 1, },
 	{ .val = 1, .div = 2, },
 	{ .val = 0, .div = 4, },
-	{ }
+	{ /* sentinel */ }
 };
 
 static struct clk_div_table video_div_table[] = {
@@ -136,7 +137,7 @@ static struct clk_div_table video_div_table[] = {
 	{ .val = 1, .div = 2, },
 	{ .val = 2, .div = 1, },
 	{ .val = 3, .div = 4, },
-	{ }
+	{ /* sentinel */ }
 };
 
 static void __init imx6q_clocks_init(struct device_node *ccm_node)
@@ -298,7 +299,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	clk[asrc_podf]        = imx_clk_divider("asrc_podf",        "asrc_pred",         base + 0x30, 9,  3);
 	clk[spdif_pred]       = imx_clk_divider("spdif_pred",       "spdif_sel",         base + 0x30, 25, 3);
 	clk[spdif_podf]       = imx_clk_divider("spdif_podf",       "spdif_pred",        base + 0x30, 22, 3);
-	clk[can_root]         = imx_clk_divider("can_root",         "pll3_usb_otg",      base + 0x20, 2,  6);
+	clk[can_root]         = imx_clk_divider("can_root",         "pll3_60m",          base + 0x20, 2,  6);
 	clk[ecspi_root]       = imx_clk_divider("ecspi_root",       "pll3_60m",          base + 0x38, 19, 6);
 	clk[gpu2d_core_podf]  = imx_clk_divider("gpu2d_core_podf",  "gpu2d_core_sel",    base + 0x18, 23, 3);
 	clk[gpu3d_core_podf]  = imx_clk_divider("gpu3d_core_podf",  "gpu3d_core_sel",    base + 0x18, 26, 3);

arch/arm/mach-imx/clk-pllv3.c

@@ -12,6 +12,7 @@
 
 #include <linux/clk.h>
 #include <linux/clk-provider.h>
+#include <linux/delay.h>
 #include <linux/io.h>
 #include <linux/slab.h>
 #include <linux/jiffies.h>
@@ -45,33 +46,49 @@ struct clk_pllv3 {
 
 #define to_clk_pllv3(_hw) container_of(_hw, struct clk_pllv3, hw)
 
+static int clk_pllv3_wait_lock(struct clk_pllv3 *pll)
+{
+	unsigned long timeout = jiffies + msecs_to_jiffies(10);
+	u32 val = readl_relaxed(pll->base) & BM_PLL_POWER;
+
+	/* No need to wait for lock when pll is not powered up */
+	if ((pll->powerup_set && !val) || (!pll->powerup_set && val))
+		return 0;
+
+	/* Wait for PLL to lock */
+	do {
+		if (readl_relaxed(pll->base) & BM_PLL_LOCK)
+			break;
+		if (time_after(jiffies, timeout))
+			break;
+		usleep_range(50, 500);
+	} while (1);
+
+	return readl_relaxed(pll->base) & BM_PLL_LOCK ? 0 : -ETIMEDOUT;
+}
+
 static int clk_pllv3_prepare(struct clk_hw *hw)
 {
 	struct clk_pllv3 *pll = to_clk_pllv3(hw);
-	unsigned long timeout;
 	u32 val;
+	int ret;
 
 	val = readl_relaxed(pll->base);
-	val &= ~BM_PLL_BYPASS;
 	if (pll->powerup_set)
 		val |= BM_PLL_POWER;
 	else
 		val &= ~BM_PLL_POWER;
 	writel_relaxed(val, pll->base);
 
-	timeout = jiffies + msecs_to_jiffies(10);
-	/* Wait for PLL to lock */
-	do {
-		if (readl_relaxed(pll->base) & BM_PLL_LOCK)
-			break;
-		if (time_after(jiffies, timeout))
-			break;
-	} while (1);
+	ret = clk_pllv3_wait_lock(pll);
+	if (ret)
+		return ret;
 
-	if (readl_relaxed(pll->base) & BM_PLL_LOCK)
-		return 0;
-	else
-		return -ETIMEDOUT;
+	val = readl_relaxed(pll->base);
+	val &= ~BM_PLL_BYPASS;
+	writel_relaxed(val, pll->base);
+
+	return 0;
 }
 
 static void clk_pllv3_unprepare(struct clk_hw *hw)
@@ -146,7 +163,7 @@ static int clk_pllv3_set_rate(struct clk_hw *hw, unsigned long rate,
 	val |= div;
 	writel_relaxed(val, pll->base);
 
-	return 0;
+	return clk_pllv3_wait_lock(pll);
 }
 
 static const struct clk_ops clk_pllv3_ops = {
@@ -202,7 +219,7 @@ static int clk_pllv3_sys_set_rate(struct clk_hw *hw, unsigned long rate,
 	val |= div;
 	writel_relaxed(val, pll->base);
 
-	return 0;
+	return clk_pllv3_wait_lock(pll);
 }
 
 static const struct clk_ops clk_pllv3_sys_ops = {
@@ -276,7 +293,7 @@ static int clk_pllv3_av_set_rate(struct clk_hw *hw, unsigned long rate,
 	writel_relaxed(mfn, pll->base + PLL_NUM_OFFSET);
 	writel_relaxed(mfd, pll->base + PLL_DENOM_OFFSET);
 
-	return 0;
+	return clk_pllv3_wait_lock(pll);
 }
 
 static const struct clk_ops clk_pllv3_av_ops = {

arch/arm/mach-imx/common.h

@@ -127,11 +127,6 @@ static inline void imx_smp_prepare(void) {}
 static inline void imx_scu_standby_enable(void) {}
 #endif
 void imx_src_init(void);
-#ifdef CONFIG_HAVE_IMX_SRC
-void imx_src_prepare_restart(void);
-#else
-static inline void imx_src_prepare_restart(void) {}
-#endif
 void imx_gpc_init(void);
 void imx_gpc_pre_suspend(void);
 void imx_gpc_post_resume(void);

arch/arm/mach-imx/src.c

@@ -115,21 +115,6 @@ void imx_set_cpu_arg(int cpu, u32 arg)
 	writel_relaxed(arg, src_base + SRC_GPR1 + cpu * 8 + 4);
 }
 
-void imx_src_prepare_restart(void)
-{
-	u32 val;
-
-	/* clear enable bits of secondary cores */
-	spin_lock(&scr_lock);
-	val = readl_relaxed(src_base + SRC_SCR);
-	val &= ~(0x7 << BP_SRC_SCR_CORE1_ENABLE);
-	writel_relaxed(val, src_base + SRC_SCR);
-	spin_unlock(&scr_lock);
-
-	/* clear persistent entry register of primary core */
-	writel_relaxed(0, src_base + SRC_GPR1);
-}
-
 void __init imx_src_init(void)
 {
 	struct device_node *np;

arch/arm/mach-imx/system.c

@@ -42,9 +42,6 @@ void mxc_restart(enum reboot_mode mode, const char *cmd)
 {
 	unsigned int wcr_enable;
 
-	if (cpu_is_imx6q() || cpu_is_imx6dl())
-		imx_src_prepare_restart();
-
 	if (wdog_clk)
 		clk_enable(wdog_clk);
 
@@ -55,7 +52,14 @@ void mxc_restart(enum reboot_mode mode, const char *cmd)
 
 	/* Assert SRS signal */
 	__raw_writew(wcr_enable, wdog_base);
-	/* write twice to ensure the request will not get ignored */
+	/*
+	 * Due to imx6q errata ERR004346 (WDOG: WDOG SRS bit requires to be
+	 * written twice), we add another two writes to ensure there must be at
+	 * least two writes happen in the same one 32kHz clock period.  We save
+	 * the target check here, since the writes shouldn't be a huge burden
+	 * for other platforms.
+	 */
+	__raw_writew(wcr_enable, wdog_base);
 	__raw_writew(wcr_enable, wdog_base);
 
 	/* wait for reset to assert... */

arch/arm/mach-integrator/integrator_cp.c

@@ -198,7 +198,8 @@ static struct mmci_platform_data mmc_data = {
 static void cp_clcd_enable(struct clcd_fb *fb)
 {
 	struct fb_var_screeninfo *var = &fb->fb.var;
-	u32 val = CM_CTRL_STATIC1 | CM_CTRL_STATIC2;
+	u32 val = CM_CTRL_STATIC1 | CM_CTRL_STATIC2
+			| CM_CTRL_LCDEN0 | CM_CTRL_LCDEN1;
 
 	if (var->bits_per_pixel <= 8 ||
 	    (var->bits_per_pixel == 16 && var->green.length == 5))

arch/arm/mach-omap2/Makefile

@@ -40,7 +40,7 @@ omap-4-5-common				=  omap4-common.o omap-wakeupgen.o
 obj-$(CONFIG_ARCH_OMAP4)		+= $(omap-4-5-common) $(smp-y) sleep44xx.o
 obj-$(CONFIG_SOC_OMAP5)			+= $(omap-4-5-common) $(smp-y) sleep44xx.o
 obj-$(CONFIG_SOC_AM43XX)		+= $(omap-4-5-common)
-obj-$(CONFIG_SOC_DRA7XX)		+= $(omap-4-5-common) $(smp-y)
+obj-$(CONFIG_SOC_DRA7XX)		+= $(omap-4-5-common) $(smp-y) sleep44xx.o
 
 plus_sec := $(call as-instr,.arch_extension sec,+sec)
 AFLAGS_omap-headsmp.o			:=-Wa,-march=armv7-a$(plus_sec)

arch/arm/mach-omap2/board-omap3beagle.c

@@ -510,7 +510,7 @@ static int __init beagle_opp_init(void)
 		mpu_dev = get_cpu_device(0);
 		iva_dev = omap_device_get_by_hwmod_name("iva");
 
-		if (IS_ERR(mpu_dev) || IS_ERR(iva_dev)) {
+		if (!mpu_dev || IS_ERR(iva_dev)) {
 			pr_err("%s: Aiee.. no mpu/dsp devices? %p %p\n",
 				__func__, mpu_dev, iva_dev);
 			return -ENODEV;

arch/arm/mach-omap2/cclock3xxx_data.c

@@ -381,6 +381,42 @@ static struct clk_hw_omap dpll4_ck_hw = {
 
 DEFINE_STRUCT_CLK(dpll4_ck, dpll3_ck_parent_names, dpll4_ck_ops);
 
+static const struct clk_div_table dpll4_mx_ck_div_table[] = {
+	{ .div = 1, .val = 1 },
+	{ .div = 2, .val = 2 },
+	{ .div = 3, .val = 3 },
+	{ .div = 4, .val = 4 },
+	{ .div = 5, .val = 5 },
+	{ .div = 6, .val = 6 },
+	{ .div = 7, .val = 7 },
+	{ .div = 8, .val = 8 },
+	{ .div = 9, .val = 9 },
+	{ .div = 10, .val = 10 },
+	{ .div = 11, .val = 11 },
+	{ .div = 12, .val = 12 },
+	{ .div = 13, .val = 13 },
+	{ .div = 14, .val = 14 },
+	{ .div = 15, .val = 15 },
+	{ .div = 16, .val = 16 },
+	{ .div = 17, .val = 17 },
+	{ .div = 18, .val = 18 },
+	{ .div = 19, .val = 19 },
+	{ .div = 20, .val = 20 },
+	{ .div = 21, .val = 21 },
+	{ .div = 22, .val = 22 },
+	{ .div = 23, .val = 23 },
+	{ .div = 24, .val = 24 },
+	{ .div = 25, .val = 25 },
+	{ .div = 26, .val = 26 },
+	{ .div = 27, .val = 27 },
+	{ .div = 28, .val = 28 },
+	{ .div = 29, .val = 29 },
+	{ .div = 30, .val = 30 },
+	{ .div = 31, .val = 31 },
+	{ .div = 32, .val = 32 },
+	{ .div = 0 },
+};
+
 DEFINE_CLK_DIVIDER(dpll4_m5_ck, "dpll4_ck", &dpll4_ck, 0x0,
 		   OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_CLKSEL),
 		   OMAP3430_CLKSEL_CAM_SHIFT, OMAP3630_CLKSEL_CAM_WIDTH,
@@ -524,10 +560,10 @@ static const struct clksel_rate clkout2_src_54m_rates[] = {
 	{ .div = 0 }
 };
 
-DEFINE_CLK_DIVIDER(dpll4_m3_ck, "dpll4_ck", &dpll4_ck, 0x0,
+DEFINE_CLK_DIVIDER_TABLE(dpll4_m3_ck, "dpll4_ck", &dpll4_ck, 0x0,
 		   OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL),
 		   OMAP3430_CLKSEL_TV_SHIFT, OMAP3630_CLKSEL_TV_WIDTH,
-		   CLK_DIVIDER_ONE_BASED, NULL);
+		   0, dpll4_mx_ck_div_table, NULL);
 
 static struct clk dpll4_m3x2_ck;
 
@@ -847,10 +883,10 @@ static struct clk dpll3_m3x2_ck_3630 = {
 
 DEFINE_CLK_FIXED_FACTOR(dpll3_x2_ck, "dpll3_ck", &dpll3_ck, 0x0, 2, 1);
 
-DEFINE_CLK_DIVIDER(dpll4_m4_ck, "dpll4_ck", &dpll4_ck, 0x0,
+DEFINE_CLK_DIVIDER_TABLE(dpll4_m4_ck, "dpll4_ck", &dpll4_ck, 0x0,
 		   OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL),
 		   OMAP3430_CLKSEL_DSS1_SHIFT, OMAP3630_CLKSEL_DSS1_WIDTH,
-		   CLK_DIVIDER_ONE_BASED, NULL);
+		   0, dpll4_mx_ck_div_table, NULL);
 
 static struct clk dpll4_m4x2_ck;
 
@@ -869,7 +905,8 @@ static struct clk_hw_omap dpll4_m4x2_ck_hw = {
 	.clkdm_name	= "dpll4_clkdm",
 };
 
-DEFINE_STRUCT_CLK(dpll4_m4x2_ck, dpll4_m4x2_ck_parent_names, dpll4_m5x2_ck_ops);
+DEFINE_STRUCT_CLK_FLAGS(dpll4_m4x2_ck, dpll4_m4x2_ck_parent_names,
+		dpll4_m5x2_ck_ops, CLK_SET_RATE_PARENT);
 
 static struct clk dpll4_m4x2_ck_3630 = {
 	.name		= "dpll4_m4x2_ck",
@@ -877,6 +914,7 @@ static struct clk dpll4_m4x2_ck_3630 = {
 	.parent_names	= dpll4_m4x2_ck_parent_names,
 	.num_parents	= ARRAY_SIZE(dpll4_m4x2_ck_parent_names),
 	.ops		= &dpll4_m5x2_ck_3630_ops,
+	.flags		= CLK_SET_RATE_PARENT,
 };
 
 DEFINE_CLK_DIVIDER(dpll4_m6_ck, "dpll4_ck", &dpll4_ck, 0x0,
@@ -968,8 +1006,9 @@ static struct clk_hw_omap dss1_alwon_fck_3430es1_hw = {
 	.clkdm_name	= "dss_clkdm",
 };
 
-DEFINE_STRUCT_CLK(dss1_alwon_fck_3430es1, dss1_alwon_fck_3430es1_parent_names,
-		  aes2_ick_ops);
+DEFINE_STRUCT_CLK_FLAGS(dss1_alwon_fck_3430es1,
+		dss1_alwon_fck_3430es1_parent_names, aes2_ick_ops,
+		CLK_SET_RATE_PARENT);
 
 static struct clk dss1_alwon_fck_3430es2;
 
@@ -983,8 +1022,9 @@ static struct clk_hw_omap dss1_alwon_fck_3430es2_hw = {
 	.clkdm_name	= "dss_clkdm",
 };
 
-DEFINE_STRUCT_CLK(dss1_alwon_fck_3430es2, dss1_alwon_fck_3430es1_parent_names,
-		  aes2_ick_ops);
+DEFINE_STRUCT_CLK_FLAGS(dss1_alwon_fck_3430es2,
+		dss1_alwon_fck_3430es1_parent_names, aes2_ick_ops,
+		CLK_SET_RATE_PARENT);
 
 static struct clk dss2_alwon_fck;
 

arch/arm/mach-omap2/cclock44xx_data.c

@@ -830,7 +830,8 @@ DEFINE_CLK_GATE(dss_tv_clk, "extalt_clkin_ck", &extalt_clkin_ck, 0x0,
 		OMAP4430_CM_DSS_DSS_CLKCTRL,
 		OMAP4430_OPTFCLKEN_TV_CLK_SHIFT, 0x0, NULL);
 
-DEFINE_CLK_GATE(dss_dss_clk, "dpll_per_m5x2_ck", &dpll_per_m5x2_ck, 0x0,
+DEFINE_CLK_GATE(dss_dss_clk, "dpll_per_m5x2_ck", &dpll_per_m5x2_ck,
+		CLK_SET_RATE_PARENT,
 		OMAP4430_CM_DSS_DSS_CLKCTRL, OMAP4430_OPTFCLKEN_DSSCLK_SHIFT,
 		0x0, NULL);
 

arch/arm/mach-omap2/gpmc-smsc911x.c

@@ -83,7 +83,7 @@ void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *gpmc_cfg)
 	pdev = platform_device_register_resndata(NULL, "smsc911x", gpmc_cfg->id,
 		 gpmc_smsc911x_resources, ARRAY_SIZE(gpmc_smsc911x_resources),
 		 &gpmc_smsc911x_config, sizeof(gpmc_smsc911x_config));
-	if (!pdev) {
+	if (IS_ERR(pdev)) {
 		pr_err("Unable to register platform device\n");
 		gpio_free(gpmc_cfg->gpio_reset);
 		goto free2;

arch/arm/mach-omap2/omap_device.c

@@ -621,6 +621,7 @@ static int _od_suspend_noirq(struct device *dev)
 
 	if (!ret && !pm_runtime_status_suspended(dev)) {
 		if (pm_generic_runtime_suspend(dev) == 0) {
+			pm_runtime_set_suspended(dev);
 			omap_device_idle(pdev);
 			od->flags |= OMAP_DEVICE_SUSPENDED;
 		}
@@ -634,10 +635,18 @@ static int _od_resume_noirq(struct device *dev)
 	struct platform_device *pdev = to_platform_device(dev);
 	struct omap_device *od = to_omap_device(pdev);
 
-	if ((od->flags & OMAP_DEVICE_SUSPENDED) &&
-	    !pm_runtime_status_suspended(dev)) {
+	if (od->flags & OMAP_DEVICE_SUSPENDED) {
 		od->flags &= ~OMAP_DEVICE_SUSPENDED;
 		omap_device_enable(pdev);
+		/*
+		 * XXX: we run before core runtime pm has resumed itself. At
+		 * this point in time, we just restore the runtime pm state and
+		 * considering symmetric operations in resume, we donot expect
+		 * to fail. If we failed, something changed in core runtime_pm
+		 * framework OR some device driver messed things up, hence, WARN
+		 */
+		WARN(pm_runtime_set_active(dev),
+		     "Could not set %s runtime state active\n", dev_name(dev));
 		pm_generic_runtime_resume(dev);
 	}
 

arch/arm/mach-omap2/prm44xx_54xx.h

@@ -42,7 +42,8 @@ extern u32 omap4_prm_vcvp_read(u8 offset);
 extern void omap4_prm_vcvp_write(u32 val, u8 offset);
 extern u32 omap4_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset);
 
-#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
+#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \
+	defined(CONFIG_SOC_DRA7XX)
 void omap44xx_prm_reconfigure_io_chain(void);
 #else
 static inline void omap44xx_prm_reconfigure_io_chain(void)

arch/arm/mach-sti/Kconfig

@@ -12,7 +12,7 @@ menuconfig ARCH_STI
 	select HAVE_ARM_SCU if SMP
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_ERRATA_754322
-	select ARM_ERRATA_764369
+	select ARM_ERRATA_764369 if SMP
 	select ARM_ERRATA_775420
 	select PL310_ERRATA_753970 if CACHE_PL310
 	select PL310_ERRATA_769419 if CACHE_PL310

arch/arm/mach-tegra/tegra.c

@@ -90,9 +90,9 @@ static void __init tegra_init_cache(void)
 
 static void __init tegra_init_early(void)
 {
-	tegra_cpu_reset_handler_init();
 	tegra_apb_io_init();
 	tegra_init_fuse();
+	tegra_cpu_reset_handler_init();
 	tegra_init_cache();
 	tegra_powergate_init();
 	tegra_hotplug_init();

drivers/pinctrl/pinctrl-single.c

@@ -1604,6 +1604,9 @@ static inline void pcs_irq_set(struct pcs_soc_data *pcs_soc,
 		pcs->write(mask, pcswi->reg);
 		raw_spin_unlock(&pcs->lock);
 	}
+
+	if (pcs_soc->rearm)
+		pcs_soc->rearm();
 }
 
 /**
@@ -1626,8 +1629,6 @@ static void pcs_irq_unmask(struct irq_data *d)
 	struct pcs_soc_data *pcs_soc = irq_data_get_irq_chip_data(d);
 
 	pcs_irq_set(pcs_soc, d->irq, true);
-	if (pcs_soc->rearm)
-		pcs_soc->rearm();
 }
 
 /**
@@ -1678,11 +1679,6 @@ static int pcs_irq_handle(struct pcs_soc_data *pcs_soc)
 		}
 	}
 
-	/*
-	 * For debugging on omaps, you may want to call pcs_soc->rearm()
-	 * here to see wake-up interrupts during runtime also.
-	 */
-
 	return count;
 }
 

drivers/video/exynos/exynos_mipi_dsi.c

@@ -141,7 +141,6 @@ static int exynos_mipi_dsi_early_blank_mode(struct mipi_dsim_device *dsim,
 
 static int exynos_mipi_dsi_blank_mode(struct mipi_dsim_device *dsim, int power)
 {
-	struct platform_device *pdev = to_platform_device(dsim->dev);
 	struct mipi_dsim_lcd_driver *client_drv = dsim->dsim_lcd_drv;
 	struct mipi_dsim_lcd_device *client_dev = dsim->dsim_lcd_dev;