Commit 7202da8b authored by Saeed Mahameed's avatar Saeed Mahameed Committed by David S. Miller

ethtool, net/mlx4_en: Cable info, get_module_info/eeprom ethtool support

Added support for get_module_info/get_module_eeprom ethtool support for cable info reading.

Added new cable types enum in include/uapi/linux/ethtool.h for ethtool use.
+#define ETH_MODULE_SFF_8636            0x3
+#define ETH_MODULE_SFF_8636_LEN        256
+#define ETH_MODULE_SFF_8436            0x4
+#define ETH_MODULE_SFF_8436_LEN        256
Signed-off-by: default avatarSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: default avatarAmir Vadai <amirv@mellanox.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 32a173c7
......@@ -35,6 +35,7 @@
#include <linux/ethtool.h>
#include <linux/netdevice.h>
#include <linux/mlx4/driver.h>
#include <linux/mlx4/device.h>
#include <linux/in.h>
#include <net/ip.h>
......@@ -1309,6 +1310,86 @@ static int mlx4_en_set_tunable(struct net_device *dev,
return ret;
}
static int mlx4_en_get_module_info(struct net_device *dev,
struct ethtool_modinfo *modinfo)
{
struct mlx4_en_priv *priv = netdev_priv(dev);
struct mlx4_en_dev *mdev = priv->mdev;
int ret;
u8 data[4];
/* Read first 2 bytes to get Module & REV ID */
ret = mlx4_get_module_info(mdev->dev, priv->port,
0/*offset*/, 2/*size*/, data);
if (ret < 2)
return -EIO;
switch (data[0] /* identifier */) {
case MLX4_MODULE_ID_QSFP:
modinfo->type = ETH_MODULE_SFF_8436;
modinfo->eeprom_len = ETH_MODULE_SFF_8436_LEN;
break;
case MLX4_MODULE_ID_QSFP_PLUS:
if (data[1] >= 0x3) { /* revision id */
modinfo->type = ETH_MODULE_SFF_8636;
modinfo->eeprom_len = ETH_MODULE_SFF_8636_LEN;
} else {
modinfo->type = ETH_MODULE_SFF_8436;
modinfo->eeprom_len = ETH_MODULE_SFF_8436_LEN;
}
break;
case MLX4_MODULE_ID_QSFP28:
modinfo->type = ETH_MODULE_SFF_8636;
modinfo->eeprom_len = ETH_MODULE_SFF_8636_LEN;
break;
case MLX4_MODULE_ID_SFP:
modinfo->type = ETH_MODULE_SFF_8472;
modinfo->eeprom_len = ETH_MODULE_SFF_8472_LEN;
break;
default:
return -ENOSYS;
}
return 0;
}
static int mlx4_en_get_module_eeprom(struct net_device *dev,
struct ethtool_eeprom *ee,
u8 *data)
{
struct mlx4_en_priv *priv = netdev_priv(dev);
struct mlx4_en_dev *mdev = priv->mdev;
int offset = ee->offset;
int i = 0, ret;
if (ee->len == 0)
return -EINVAL;
memset(data, 0, ee->len);
while (i < ee->len) {
en_dbg(DRV, priv,
"mlx4_get_module_info i(%d) offset(%d) len(%d)\n",
i, offset, ee->len - i);
ret = mlx4_get_module_info(mdev->dev, priv->port,
offset, ee->len - i, data + i);
if (!ret) /* Done reading */
return 0;
if (ret < 0) {
en_err(priv,
"mlx4_get_module_info i(%d) offset(%d) bytes_to_read(%d) - FAILED (0x%x)\n",
i, offset, ee->len - i, ret);
return 0;
}
i += ret;
offset += ret;
}
return 0;
}
const struct ethtool_ops mlx4_en_ethtool_ops = {
.get_drvinfo = mlx4_en_get_drvinfo,
......@@ -1341,6 +1422,8 @@ const struct ethtool_ops mlx4_en_ethtool_ops = {
.get_priv_flags = mlx4_en_get_priv_flags,
.get_tunable = mlx4_en_get_tunable,
.set_tunable = mlx4_en_set_tunable,
.get_module_info = mlx4_en_get_module_info,
.get_module_eeprom = mlx4_en_get_module_eeprom
};
......
......@@ -1343,6 +1343,10 @@ enum ethtool_sfeatures_retval_bits {
#define ETH_MODULE_SFF_8079_LEN 256
#define ETH_MODULE_SFF_8472 0x2
#define ETH_MODULE_SFF_8472_LEN 512
#define ETH_MODULE_SFF_8636 0x3
#define ETH_MODULE_SFF_8636_LEN 256
#define ETH_MODULE_SFF_8436 0x4
#define ETH_MODULE_SFF_8436_LEN 256
/* Reset flags */
/* The reset() operation must clear the flags for the components which
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment