i2c: piix4: Add adapter port name support for SB800 chipset

This patch adds support for port names for the SB800 chipset.
Since the chipset supports a multiplexed main SMBus controller, adding
the channel name to the adapter name is necessary to differentiate the
ports better (for example in sensors output).
Signed-off-by: Christian Fetzer <fetzer.ch@gmail.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

drivers/i2c/busses/i2c-piix4.c

@@ -136,6 +136,12 @@ static const struct dmi_system_id piix4_dmi_ibm[] = {
 	{ },
 };
 
+/* SB800 globals */
+static const char *piix4_main_port_names_sb800[PIIX4_MAX_ADAPTERS] = {
+	"SDA0", "SDA2", "SDA3", "SDA4"
+};
+static const char *piix4_aux_port_name_sb800 = "SDA1";
+
 struct i2c_piix4_adapdata {
 	unsigned short smba;
 
@@ -619,7 +625,7 @@ static struct i2c_adapter *piix4_main_adapters[PIIX4_MAX_ADAPTERS];
 static struct i2c_adapter *piix4_aux_adapter;
 
 static int piix4_add_adapter(struct pci_dev *dev, unsigned short smba,
-			     struct i2c_adapter **padap)
+			     const char *name, struct i2c_adapter **padap)
 {
 	struct i2c_adapter *adap;
 	struct i2c_piix4_adapdata *adapdata;
@@ -648,7 +654,7 @@ static int piix4_add_adapter(struct pci_dev *dev, unsigned short smba,
 	adap->dev.parent = &dev->dev;
 
 	snprintf(adap->name, sizeof(adap->name),
-		"SMBus PIIX4 adapter at %04x", smba);
+		"SMBus PIIX4 adapter %s at %04x", name, smba);
 
 	i2c_set_adapdata(adap, adapdata);
 
@@ -680,6 +686,7 @@ static int piix4_add_adapters_sb800(struct pci_dev *dev, unsigned short smba)
 
 	for (port = 0; port < PIIX4_MAX_ADAPTERS; port++) {
 		retval = piix4_add_adapter(dev, smba,
+					   piix4_main_port_names_sb800[port],
 					   &piix4_main_adapters[port]);
 		if (retval < 0)
 			goto error;
@@ -749,7 +756,7 @@ static int piix4_probe(struct pci_dev *dev, const struct pci_device_id *id)
 			return retval;
 
 		/* Try to register main SMBus adapter, give up if we can't */
-		retval = piix4_add_adapter(dev, retval,
+		retval = piix4_add_adapter(dev, retval, "main",
 					   &piix4_main_adapters[0]);
 		if (retval < 0)
 			return retval;
@@ -776,7 +783,8 @@ static int piix4_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	if (retval > 0) {
 		/* Try to add the aux adapter if it exists,
 		 * piix4_add_adapter will clean up if this fails */
-		piix4_add_adapter(dev, retval, &piix4_aux_adapter);
+		piix4_add_adapter(dev, retval, piix4_aux_port_name_sb800,
+				  &piix4_aux_adapter);
 	}
 
 	return 0;