Commit 74648508 authored by Fabrice Gasnier's avatar Fabrice Gasnier Committed by Jonathan Cameron

iio: adc: stm32-dfsdm: move dma slave config to start routine

Move DMA slave configuration to start routine: depending on regular or
injected mode is in use, DMA needs to read resp. RDATAR or JDATAR.
This is precursor patch to introduce injected mode (used for scan).
Signed-off-by: default avatarFabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: default avatarJonathan Cameron <Jonathan.Cameron@huawei.com>
parent caf9c1e5
......@@ -556,6 +556,11 @@ static void stm32_dfsdm_audio_dma_buffer_done(void *data)
static int stm32_dfsdm_adc_dma_start(struct iio_dev *indio_dev)
{
struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
struct dma_slave_config config = {
.src_addr = (dma_addr_t)adc->dfsdm->phys_base +
DFSDM_RDATAR(adc->fl_id),
.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES,
};
struct dma_async_tx_descriptor *desc;
dma_cookie_t cookie;
int ret;
......@@ -566,6 +571,10 @@ static int stm32_dfsdm_adc_dma_start(struct iio_dev *indio_dev)
dev_dbg(&indio_dev->dev, "%s size=%d watermark=%d\n", __func__,
adc->buf_sz, adc->buf_sz / 2);
ret = dmaengine_slave_config(adc->dma_chan, &config);
if (ret)
return ret;
/* Prepare a DMA cyclic transaction */
desc = dmaengine_prep_dma_cyclic(adc->dma_chan,
adc->dma_buf,
......@@ -925,12 +934,6 @@ static void stm32_dfsdm_dma_release(struct iio_dev *indio_dev)
static int stm32_dfsdm_dma_request(struct iio_dev *indio_dev)
{
struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
struct dma_slave_config config = {
.src_addr = (dma_addr_t)adc->dfsdm->phys_base +
DFSDM_RDATAR(adc->fl_id),
.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES,
};
int ret;
adc->dma_chan = dma_request_slave_channel(&indio_dev->dev, "rx");
if (!adc->dma_chan)
......@@ -940,23 +943,11 @@ static int stm32_dfsdm_dma_request(struct iio_dev *indio_dev)
DFSDM_DMA_BUFFER_SIZE,
&adc->dma_buf, GFP_KERNEL);
if (!adc->rx_buf) {
ret = -ENOMEM;
goto err_release;
dma_release_channel(adc->dma_chan);
return -ENOMEM;
}
ret = dmaengine_slave_config(adc->dma_chan, &config);
if (ret)
goto err_free;
return 0;
err_free:
dma_free_coherent(adc->dma_chan->device->dev, DFSDM_DMA_BUFFER_SIZE,
adc->rx_buf, adc->dma_buf);
err_release:
dma_release_channel(adc->dma_chan);
return ret;
}
static int stm32_dfsdm_adc_chan_init_one(struct iio_dev *indio_dev,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment