powerpc: Add A2 cpu support

Add the cputable entry, regs and setup & restore entries for
the PowerPC A2 core.
Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: default avatarMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
parent 411e689d
......@@ -437,9 +437,13 @@ extern const char *powerpc_base_platform;
CPU_FTR_PURR | CPU_FTR_REAL_LE | CPU_FTR_NO_SLBIE_B)
#define CPU_FTRS_COMPATIBLE (CPU_FTR_USE_TB | CPU_FTR_PPCAS_ARCH_V2)
#define CPU_FTRS_A2 (CPU_FTR_USE_TB | CPU_FTR_SMT | CPU_FTR_DBELL | \
CPU_FTR_TLBIEL | CPU_FTR_NOEXECUTE | CPU_FTR_NODSISRALIGN | \
CPU_FTR_16M_PAGE)
#ifdef __powerpc64__
#ifdef CONFIG_PPC_BOOK3E
#define CPU_FTRS_POSSIBLE (CPU_FTRS_E5500)
#define CPU_FTRS_POSSIBLE (CPU_FTRS_E5500 | CPU_FTRS_A2)
#else
#define CPU_FTRS_POSSIBLE \
(CPU_FTRS_POWER3 | CPU_FTRS_RS64 | CPU_FTRS_POWER4 | \
......@@ -488,7 +492,7 @@ enum {
#ifdef __powerpc64__
#ifdef CONFIG_PPC_BOOK3E
#define CPU_FTRS_ALWAYS (CPU_FTRS_E5500)
#define CPU_FTRS_ALWAYS (CPU_FTRS_E5500 & CPU_FTRS_A2)
#else
#define CPU_FTRS_ALWAYS \
(CPU_FTRS_POWER3 & CPU_FTRS_RS64 & CPU_FTRS_POWER4 & \
......
/*
* Register definitions specific to the A2 core
*
* Copyright (C) 2008 Ben. Herrenschmidt (benh@kernel.crashing.org), IBM Corp.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#ifndef __ASM_POWERPC_REG_A2_H__
#define __ASM_POWERPC_REG_A2_H__
#define SPRN_TENSR 0x1b5
#define SPRN_TENS 0x1b6 /* Thread ENable Set */
#define SPRN_TENC 0x1b7 /* Thread ENable Clear */
#define SPRN_A2_CCR0 0x3f0 /* Core Configuration Register 0 */
#define SPRN_A2_CCR1 0x3f1 /* Core Configuration Register 1 */
#define SPRN_A2_CCR2 0x3f2 /* Core Configuration Register 2 */
#define SPRN_MMUCR0 0x3fc /* MMU Control Register 0 */
#define SPRN_MMUCR1 0x3fd /* MMU Control Register 1 */
#define SPRN_MMUCR2 0x3fe /* MMU Control Register 2 */
#define SPRN_MMUCR3 0x3ff /* MMU Control Register 3 */
#define SPRN_IAR 0x372
#define SPRN_IUCR0 0x3f3
#define IUCR0_ICBI_ACK 0x1000
#define SPRN_XUCR0 0x3f6 /* Execution Unit Config Register 0 */
#define A2_IERAT_SIZE 16
#define A2_DERAT_SIZE 32
/* A2 MMUCR0 bits */
#define MMUCR0_ECL 0x80000000 /* Extended Class for TLB fills */
#define MMUCR0_TID_NZ 0x40000000 /* TID is non-zero */
#define MMUCR0_TS 0x10000000 /* Translation space for TLB fills */
#define MMUCR0_TGS 0x20000000 /* Guest space for TLB fills */
#define MMUCR0_TLBSEL 0x0c000000 /* TLB or ERAT target for TLB fills */
#define MMUCR0_TLBSEL_U 0x00000000 /* TLBSEL = UTLB */
#define MMUCR0_TLBSEL_I 0x08000000 /* TLBSEL = I-ERAT */
#define MMUCR0_TLBSEL_D 0x0c000000 /* TLBSEL = D-ERAT */
#define MMUCR0_LOCKSRSH 0x02000000 /* Use TLB lock on tlbsx. */
#define MMUCR0_TID_MASK 0x000000ff /* TID field */
/* A2 MMUCR1 bits */
#define MMUCR1_IRRE 0x80000000 /* I-ERAT round robin enable */
#define MMUCR1_DRRE 0x40000000 /* D-ERAT round robin enable */
#define MMUCR1_REE 0x20000000 /* Reference Exception Enable*/
#define MMUCR1_CEE 0x10000000 /* Change exception enable */
#define MMUCR1_CSINV_ALL 0x00000000 /* Inval ERAT on all CS evts */
#define MMUCR1_CSINV_NISYNC 0x04000000 /* Inval ERAT on all ex isync*/
#define MMUCR1_CSINV_NEVER 0x0c000000 /* Don't inval ERAT on CS */
#define MMUCR1_ICTID 0x00080000 /* IERAT class field as TID */
#define MMUCR1_ITTID 0x00040000 /* IERAT thdid field as TID */
#define MMUCR1_DCTID 0x00020000 /* DERAT class field as TID */
#define MMUCR1_DTTID 0x00010000 /* DERAT thdid field as TID */
#define MMUCR1_DCCD 0x00008000 /* DERAT class ignore */
#define MMUCR1_TLBWE_BINV 0x00004000 /* back invalidate on tlbwe */
/* A2 MMUCR2 bits */
#define MMUCR2_PSSEL_SHIFT 4
/* A2 MMUCR3 bits */
#define MMUCR3_THID 0x0000000f /* Thread ID */
/* *** ERAT TLB bits definitions */
#define TLB0_EPN_MASK ASM_CONST(0xfffffffffffff000)
#define TLB0_CLASS_MASK ASM_CONST(0x0000000000000c00)
#define TLB0_CLASS_00 ASM_CONST(0x0000000000000000)
#define TLB0_CLASS_01 ASM_CONST(0x0000000000000400)
#define TLB0_CLASS_10 ASM_CONST(0x0000000000000800)
#define TLB0_CLASS_11 ASM_CONST(0x0000000000000c00)
#define TLB0_V ASM_CONST(0x0000000000000200)
#define TLB0_X ASM_CONST(0x0000000000000100)
#define TLB0_SIZE_MASK ASM_CONST(0x00000000000000f0)
#define TLB0_SIZE_4K ASM_CONST(0x0000000000000010)
#define TLB0_SIZE_64K ASM_CONST(0x0000000000000030)
#define TLB0_SIZE_1M ASM_CONST(0x0000000000000050)
#define TLB0_SIZE_16M ASM_CONST(0x0000000000000070)
#define TLB0_SIZE_1G ASM_CONST(0x00000000000000a0)
#define TLB0_THDID_MASK ASM_CONST(0x000000000000000f)
#define TLB0_THDID_0 ASM_CONST(0x0000000000000001)
#define TLB0_THDID_1 ASM_CONST(0x0000000000000002)
#define TLB0_THDID_2 ASM_CONST(0x0000000000000004)
#define TLB0_THDID_3 ASM_CONST(0x0000000000000008)
#define TLB0_THDID_ALL ASM_CONST(0x000000000000000f)
#define TLB1_RESVATTR ASM_CONST(0x00f0000000000000)
#define TLB1_U0 ASM_CONST(0x0008000000000000)
#define TLB1_U1 ASM_CONST(0x0004000000000000)
#define TLB1_U2 ASM_CONST(0x0002000000000000)
#define TLB1_U3 ASM_CONST(0x0001000000000000)
#define TLB1_R ASM_CONST(0x0000800000000000)
#define TLB1_C ASM_CONST(0x0000400000000000)
#define TLB1_RPN_MASK ASM_CONST(0x000003fffffff000)
#define TLB1_W ASM_CONST(0x0000000000000800)
#define TLB1_I ASM_CONST(0x0000000000000400)
#define TLB1_M ASM_CONST(0x0000000000000200)
#define TLB1_G ASM_CONST(0x0000000000000100)
#define TLB1_E ASM_CONST(0x0000000000000080)
#define TLB1_VF ASM_CONST(0x0000000000000040)
#define TLB1_UX ASM_CONST(0x0000000000000020)
#define TLB1_SX ASM_CONST(0x0000000000000010)
#define TLB1_UW ASM_CONST(0x0000000000000008)
#define TLB1_SW ASM_CONST(0x0000000000000004)
#define TLB1_UR ASM_CONST(0x0000000000000002)
#define TLB1_SR ASM_CONST(0x0000000000000001)
/* A2 erativax attributes definitions */
#define ERATIVAX_RS_IS_ALL 0x000
#define ERATIVAX_RS_IS_TID 0x040
#define ERATIVAX_RS_IS_CLASS 0x080
#define ERATIVAX_RS_IS_FULLMATCH 0x0c0
#define ERATIVAX_CLASS_00 0x000
#define ERATIVAX_CLASS_01 0x010
#define ERATIVAX_CLASS_10 0x020
#define ERATIVAX_CLASS_11 0x030
#define ERATIVAX_PSIZE_4K (TLB_PSIZE_4K >> 1)
#define ERATIVAX_PSIZE_64K (TLB_PSIZE_64K >> 1)
#define ERATIVAX_PSIZE_1M (TLB_PSIZE_1M >> 1)
#define ERATIVAX_PSIZE_16M (TLB_PSIZE_16M >> 1)
#define ERATIVAX_PSIZE_1G (TLB_PSIZE_1G >> 1)
/* A2 eratilx attributes definitions */
#define ERATILX_T_ALL 0
#define ERATILX_T_TID 1
#define ERATILX_T_TGS 2
#define ERATILX_T_FULLMATCH 3
#define ERATILX_T_CLASS0 4
#define ERATILX_T_CLASS1 5
#define ERATILX_T_CLASS2 6
#define ERATILX_T_CLASS3 7
/* XUCR0 bits */
#define XUCR0_TRACE_UM_T0 0x40000000 /* Thread 0 */
#define XUCR0_TRACE_UM_T1 0x20000000 /* Thread 1 */
#define XUCR0_TRACE_UM_T2 0x10000000 /* Thread 2 */
#define XUCR0_TRACE_UM_T3 0x08000000 /* Thread 3 */
/* A2 CCR0 register */
#define A2_CCR0_PME_DISABLED 0x00000000
#define A2_CCR0_PME_SLEEP 0x40000000
#define A2_CCR0_PME_RVW 0x80000000
#define A2_CCR0_PME_DISABLED2 0xc0000000
/* A2 CCR2 register */
#define A2_CCR2_ERAT_ONLY_MODE 0x00000001
#define A2_CCR2_ENABLE_ICSWX 0x00000002
#define A2_CCR2_ENABLE_PC 0x20000000
#define A2_CCR2_ENABLE_TRACE 0x40000000
#endif /* __ASM_POWERPC_REG_A2_H__ */
......@@ -41,6 +41,7 @@ obj-$(CONFIG_PPC_BOOK3S_64) += cpu_setup_ppc970.o cpu_setup_pa6t.o
obj-$(CONFIG_PPC_BOOK3S_64) += cpu_setup_power7.o
obj64-$(CONFIG_RELOCATABLE) += reloc_64.o
obj-$(CONFIG_PPC_BOOK3E_64) += exceptions-64e.o idle_book3e.o
obj-$(CONFIG_PPC_A2) += cpu_setup_a2.o
obj-$(CONFIG_PPC64) += vdso64/
obj-$(CONFIG_ALTIVEC) += vecemu.o
obj-$(CONFIG_PPC_970_NAP) += idle_power4.o
......
/*
* A2 specific assembly support code
*
* Copyright 2009 Ben Herrenschmidt, IBM Corp.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <asm/asm-offsets.h>
#include <asm/ppc_asm.h>
#include <asm/ppc-opcode.h>
#include <asm/processor.h>
#include <asm/reg_a2.h>
#include <asm/reg.h>
#include <asm/thread_info.h>
/*
* Disable thdid and class fields in ERATs to bump PID to full 14 bits capacity.
* This also prevents external LPID accesses but that isn't a problem when not a
* guest. Under PV, this setting will be ignored and MMUCR will return the right
* number of PID bits we can use.
*/
#define MMUCR1_EXTEND_PID \
(MMUCR1_ICTID | MMUCR1_ITTID | MMUCR1_DCTID | \
MMUCR1_DTTID | MMUCR1_DCCD)
/*
* Use extended PIDs if enabled.
* Don't clear the ERATs on context sync events and enable I & D LRU.
* Enable ERAT back invalidate when tlbwe overwrites an entry.
*/
#define INITIAL_MMUCR1 \
(MMUCR1_EXTEND_PID | MMUCR1_CSINV_NEVER | MMUCR1_IRRE | \
MMUCR1_DRRE | MMUCR1_TLBWE_BINV)
_GLOBAL(__setup_cpu_a2)
/* Some of these are actually thread local and some are
* core local but doing it always won't hurt
*/
#ifdef CONFIG_PPC_WSP_COPRO
/* Make sure ACOP starts out as zero */
li r3,0
mtspr SPRN_ACOP,r3
/* Enable icswx instruction */
mfspr r3,SPRN_A2_CCR2
ori r3,r3,A2_CCR2_ENABLE_ICSWX
mtspr SPRN_A2_CCR2,r3
/* Unmask all CTs in HACOP */
li r3,-1
mtspr SPRN_HACOP,r3
#endif /* CONFIG_PPC_WSP_COPRO */
/* Enable doorbell */
mfspr r3,SPRN_A2_CCR2
oris r3,r3,A2_CCR2_ENABLE_PC@h
mtspr SPRN_A2_CCR2,r3
isync
/* Setup CCR0 to disable power saving for now as it's busted
* in the current implementations. Setup CCR1 to wake on
* interrupts normally (we write the default value but who
* knows what FW may have clobbered...)
*/
li r3,0
mtspr SPRN_A2_CCR0, r3
LOAD_REG_IMMEDIATE(r3,0x0f0f0f0f)
mtspr SPRN_A2_CCR1, r3
/* Initialise MMUCR1 */
lis r3,INITIAL_MMUCR1@h
ori r3,r3,INITIAL_MMUCR1@l
mtspr SPRN_MMUCR1,r3
/* Set MMUCR2 to enable 4K, 64K, 1M, 16M and 1G pages */
LOAD_REG_IMMEDIATE(r3, 0x000a7531)
mtspr SPRN_MMUCR2,r3
/* Set MMUCR3 to write all thids bit to the TLB */
LOAD_REG_IMMEDIATE(r3, 0x0000000f)
mtspr SPRN_MMUCR3,r3
/* Don't do ERAT stuff if running guest mode */
mfmsr r3
andis. r0,r3,MSR_GS@h
bne 1f
/* Now set the I-ERAT watermark to 15 */
lis r4,(MMUCR0_TLBSEL_I|MMUCR0_ECL)@h
mtspr SPRN_MMUCR0, r4
li r4,A2_IERAT_SIZE-1
PPC_ERATWE(r4,r4,3)
/* Now set the D-ERAT watermark to 31 */
lis r4,(MMUCR0_TLBSEL_D|MMUCR0_ECL)@h
mtspr SPRN_MMUCR0, r4
li r4,A2_DERAT_SIZE-1
PPC_ERATWE(r4,r4,3)
/* And invalidate the beast just in case. That won't get rid of
* a bolted entry though it will be in LRU and so will go away eventually
* but let's not bother for now
*/
PPC_ERATILX(0,0,0)
1:
blr
_GLOBAL(__restore_cpu_a2)
b __setup_cpu_a2
......@@ -62,10 +62,12 @@ extern void __setup_cpu_745x(unsigned long offset, struct cpu_spec* spec);
extern void __setup_cpu_ppc970(unsigned long offset, struct cpu_spec* spec);
extern void __setup_cpu_ppc970MP(unsigned long offset, struct cpu_spec* spec);
extern void __setup_cpu_pa6t(unsigned long offset, struct cpu_spec* spec);
extern void __setup_cpu_a2(unsigned long offset, struct cpu_spec* spec);
extern void __restore_cpu_pa6t(void);
extern void __restore_cpu_ppc970(void);
extern void __setup_cpu_power7(unsigned long offset, struct cpu_spec* spec);
extern void __restore_cpu_power7(void);
extern void __restore_cpu_a2(void);
#endif /* CONFIG_PPC64 */
#if defined(CONFIG_E500)
extern void __setup_cpu_e5500(unsigned long offset, struct cpu_spec* spec);
......@@ -2011,7 +2013,26 @@ static struct cpu_spec __initdata cpu_specs[] = {
#endif /* CONFIG_PPC32 */
#endif /* CONFIG_E500 */
#ifdef CONFIG_PPC_BOOK3E_64
#ifdef CONFIG_PPC_A2
{ /* Standard A2 (>= DD2) + FPU core */
.pvr_mask = 0xffff0000,
.pvr_value = 0x00480000,
.cpu_name = "A2 (>= DD2)",
.cpu_features = CPU_FTRS_A2,
.cpu_user_features = COMMON_USER_PPC64,
.mmu_features = MMU_FTR_TYPE_3E | MMU_FTR_USE_TLBILX |
MMU_FTR_USE_TLBIVAX_BCAST |
MMU_FTR_LOCK_BCAST_INVAL |
MMU_FTR_USE_TLBRSRV |
MMU_FTR_USE_PAIRED_MAS,
.icache_bsize = 64,
.dcache_bsize = 64,
.num_pmcs = 0,
.cpu_setup = __setup_cpu_a2,
.cpu_restore = __restore_cpu_a2,
.machine_check = machine_check_generic,
.platform = "ppca2",
},
{ /* This is a default entry to get going, to be replaced by
* a real one at some stage
*/
......@@ -2032,7 +2053,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.machine_check = machine_check_generic,
.platform = "power6",
},
#endif
#endif /* CONFIG_PPC_A2 */
};
static struct cpu_spec the_cpu_spec;
......
......@@ -107,6 +107,10 @@ config POWER4
depends on PPC64 && PPC_BOOK3S
def_bool y
config PPC_A2
bool
depends on PPC_BOOK3E_64
config TUNE_CELL
bool "Optimize for Cell Broadband Engine"
depends on PPC64 && PPC_BOOK3S
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment