Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (32 commits)
  ACPI: i2c-scmi: don't use acpi_device_uid()
  ACPI: simplify building device HID/CID list
  ACPI: remove acpi_device_uid() and related stuff
  ACPI: remove acpi_device.flags.hardware_id
  ACPI: remove acpi_device.flags.compatible_ids
  ACPI: maintain a single list of _HID and _CID IDs
  ACPI: make sure every acpi_device has an ID
  ACPI: use acpi_device_hid() when possible
  ACPI: fix synthetic HID for \_SB_
  ACPI: handle re-enumeration, when acpi_devices might already exist
  ACPI: factor out device type and status checking
  ACPI: add acpi_bus_get_status_handle()
  ACPI: use acpi_walk_namespace() to enumerate devices
  ACPI: identify device tree root by null parent pointer, not ACPI_BUS_TYPE
  ACPI: enumerate namespace before adding functional fixed hardware devices
  ACPI: convert acpi_bus_scan() to operate on an acpi_handle
  ACPI: add acpi_bus_get_parent() and remove "parent" arguments
  ACPI: remove unnecessary argument checking
  ACPI: remove redundant "type" arguments
  ACPI: remove acpi_device_set_context() "type" argument
  ...

Documentation/laptops/thinkpad-acpi.txt

@@ -199,18 +199,22 @@ kind to allow it (and it often doesn't!).
 
 Not all bits in the mask can be modified.  Not all bits that can be
 modified do anything.  Not all hot keys can be individually controlled
-by the mask.  Some models do not support the mask at all, and in those
-models, hot keys cannot be controlled individually.  The behaviour of
-the mask is, therefore, highly dependent on the ThinkPad model.
+by the mask.  Some models do not support the mask at all.  The behaviour
+of the mask is, therefore, highly dependent on the ThinkPad model.
+
+The driver will filter out any unmasked hotkeys, so even if the firmware
+doesn't allow disabling an specific hotkey, the driver will not report
+events for unmasked hotkeys.
 
 Note that unmasking some keys prevents their default behavior.  For
 example, if Fn+F5 is unmasked, that key will no longer enable/disable
-Bluetooth by itself.
+Bluetooth by itself in firmware.
 
-Note also that not all Fn key combinations are supported through ACPI.
-For example, on the X40, the brightness, volume and "Access IBM" buttons
-do not generate ACPI events even with this driver.  They *can* be used
-through the "ThinkPad Buttons" utility, see http://www.nongnu.org/tpb/
+Note also that not all Fn key combinations are supported through ACPI
+depending on the ThinkPad model and firmware version.  On those
+ThinkPads, it is still possible to support some extra hotkeys by
+polling the "CMOS NVRAM" at least 10 times per second.  The driver
+attempts to enables this functionality automatically when required.
 
 procfs notes:
 
@@ -255,18 +259,11 @@ sysfs notes:
 		1: does nothing
 
 	hotkey_mask:
-		bit mask to enable driver-handling (and depending on
+		bit mask to enable reporting (and depending on
 		the firmware, ACPI event generation) for each hot key
 		(see above).  Returns the current status of the hot keys
 		mask, and allows one to modify it.
 
-		Note: when NVRAM polling is active, the firmware mask
-		will be different from the value returned by
-		hotkey_mask.  The driver will retain enabled bits for
-		hotkeys that are under NVRAM polling even if the
-		firmware refuses them, and will not set these bits on
-		the firmware hot key mask.
-
 	hotkey_all_mask:
 		bit mask that should enable event reporting for all
 		supported hot keys, when echoed to hotkey_mask above.
@@ -279,7 +276,8 @@ sysfs notes:
 		bit mask that should enable event reporting for all
 		supported hot keys, except those which are always
 		handled by the firmware anyway.  Echo it to
-		hotkey_mask above, to use.
+		hotkey_mask above, to use.  This is the default mask
+		used by the driver.
 
 	hotkey_source_mask:
 		bit mask that selects which hot keys will the driver
@@ -287,9 +285,10 @@ sysfs notes:
 		based on the capabilities reported by the ACPI firmware,
 		but it can be overridden at runtime.
 
-		Hot keys whose bits are set in both hotkey_source_mask
-		and also on hotkey_mask are polled for in NVRAM.  Only a
-		few hot keys are available through CMOS NVRAM polling.
+		Hot keys whose bits are set in hotkey_source_mask are
+		polled for in NVRAM, and reported as hotkey events if
+		enabled in hotkey_mask.  Only a few hot keys are
+		available through CMOS NVRAM polling.
 
 		Warning: when in NVRAM mode, the volume up/down/mute
 		keys are synthesized according to changes in the mixer,
@@ -525,6 +524,7 @@ compatibility purposes when hotkey_report_mode is set to 1.
 0x2305		System is waking up from suspend to eject bay
 0x2404		System is waking up from hibernation to undock
 0x2405		System is waking up from hibernation to eject bay
+0x5010		Brightness level changed/control event
 
 The above events are never propagated by the driver.
 
@@ -532,7 +532,6 @@ The above events are never propagated by the driver.
 0x4003		Undocked (see 0x2x04), can sleep again
 0x500B		Tablet pen inserted into its storage bay
 0x500C		Tablet pen removed from its storage bay
-0x5010		Brightness level changed (newer Lenovo BIOSes)
 
 The above events are propagated by the driver.
 
@@ -621,6 +620,8 @@ For Lenovo models *with* ACPI backlight control:
 2. Do *NOT* load up ACPI video, enable the hotkeys in thinkpad-acpi,
    and map them to KEY_BRIGHTNESS_UP and KEY_BRIGHTNESS_DOWN.  Process
    these keys on userspace somehow (e.g. by calling xbacklight).
+   The driver will do this automatically if it detects that ACPI video
+   has been disabled.
 
 
 Bluetooth
@@ -1459,3 +1460,8 @@ Sysfs interface changelog:
 0x020400:	Marker for 16 LEDs support.  Also, LEDs that are known
 		to not exist in a given model are not registered with
 		the LED sysfs class anymore.
+
+0x020500:	Updated hotkey driver, hotkey_mask is always available
+		and it is always able to disable hot keys.  Very old
+		thinkpads are properly supported.  hotkey_bios_mask
+		is deprecated and marked for removal.

drivers/acpi/bus.c

@@ -94,36 +94,33 @@ int acpi_bus_get_device(acpi_handle handle, struct acpi_device **device)
 
 EXPORT_SYMBOL(acpi_bus_get_device);
 
-int acpi_bus_get_status(struct acpi_device *device)
+acpi_status acpi_bus_get_status_handle(acpi_handle handle,
+				       unsigned long long *sta)
 {
-	acpi_status status = AE_OK;
-	unsigned long long sta = 0;
-
+	acpi_status status;
 
-	if (!device)
-		return -EINVAL;
+	status = acpi_evaluate_integer(handle, "_STA", NULL, sta);
+	if (ACPI_SUCCESS(status))
+		return AE_OK;
 
-	/*
-	 * Evaluate _STA if present.
-	 */
-	if (device->flags.dynamic_status) {
-		status =
-		    acpi_evaluate_integer(device->handle, "_STA", NULL, &sta);
-		if (ACPI_FAILURE(status))
-			return -ENODEV;
-		STRUCT_TO_INT(device->status) = (int)sta;
+	if (status == AE_NOT_FOUND) {
+		*sta = ACPI_STA_DEVICE_PRESENT | ACPI_STA_DEVICE_ENABLED |
+		       ACPI_STA_DEVICE_UI      | ACPI_STA_DEVICE_FUNCTIONING;
+		return AE_OK;
 	}
+	return status;
+}
 
-	/*
-	 * According to ACPI spec some device can be present and functional
-	 * even if the parent is not present but functional.
-	 * In such conditions the child device should not inherit the status
-	 * from the parent.
-	 */
-	else
-		STRUCT_TO_INT(device->status) =
-		    ACPI_STA_DEVICE_PRESENT | ACPI_STA_DEVICE_ENABLED |
-		    ACPI_STA_DEVICE_UI      | ACPI_STA_DEVICE_FUNCTIONING;
+int acpi_bus_get_status(struct acpi_device *device)
+{
+	acpi_status status;
+	unsigned long long sta;
+
+	status = acpi_bus_get_status_handle(device->handle, &sta);
+	if (ACPI_FAILURE(status))
+		return -ENODEV;
+
+	STRUCT_TO_INT(device->status) = (int) sta;
 
 	if (device->status.functional && !device->status.present) {
 		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device [%s] status [%08x]: "
@@ -135,10 +132,8 @@ int acpi_bus_get_status(struct acpi_device *device)
 	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device [%s] status [%08x]\n",
 			  device->pnp.bus_id,
 			  (u32) STRUCT_TO_INT(device->status)));
-
 	return 0;
 }
-
 EXPORT_SYMBOL(acpi_bus_get_status);
 
 void acpi_bus_private_data_handler(acpi_handle handle,

drivers/i2c/busses/i2c-scmi.c

@@ -369,9 +369,8 @@ static int acpi_smbus_cmi_add(struct acpi_device *device)
 		goto err;
 
 	snprintf(smbus_cmi->adapter.name, sizeof(smbus_cmi->adapter.name),
-		"SMBus CMI adapter %s (%s)",
-		acpi_device_name(device),
-		acpi_device_uid(device));
+		"SMBus CMI adapter %s",
+		acpi_device_name(device));
 	smbus_cmi->adapter.owner = THIS_MODULE;
 	smbus_cmi->adapter.algo = &acpi_smbus_cmi_algorithm;
 	smbus_cmi->adapter.algo_data = smbus_cmi;

drivers/pci/hotplug/acpiphp_ibm.c

@@ -406,7 +406,6 @@ static acpi_status __init ibm_find_acpi_device(acpi_handle handle,
 			__func__, status);
 		return retval;
 	}
-	info->hardware_id.string[sizeof(info->hardware_id.length) - 1] = '\0';
 
 	if (info->current_status && (info->valid & ACPI_VALID_HID) &&
 			(!strcmp(info->hardware_id.string, IBM_HARDWARE_ID1) ||

drivers/pnp/pnpacpi/core.c

@@ -153,6 +153,7 @@ static int __init pnpacpi_add_device(struct acpi_device *device)
 	acpi_handle temp = NULL;
 	acpi_status status;
 	struct pnp_dev *dev;
+	struct acpi_hardware_id *id;
 
 	/*
 	 * If a PnPacpi device is not present , the device
@@ -193,15 +194,12 @@ static int __init pnpacpi_add_device(struct acpi_device *device)
 	if (dev->capabilities & PNP_CONFIGURABLE)
 		pnpacpi_parse_resource_option_data(dev);
 
-	if (device->flags.compatible_ids) {
-		struct acpica_device_id_list *cid_list = device->pnp.cid_list;
-		int i;
-
-		for (i = 0; i < cid_list->count; i++) {
-			if (!ispnpidacpi(cid_list->ids[i].string))
-				continue;
-			pnp_add_id(dev, cid_list->ids[i].string);
-		}
+	list_for_each_entry(id, &device->pnp.ids, list) {
+		if (!strcmp(id->id, acpi_device_hid(device)))
+			continue;
+		if (!ispnpidacpi(id->id))
+			continue;
+		pnp_add_id(dev, id->id);
 	}
 
 	/* clear out the damaged flags */
@@ -232,9 +230,8 @@ static int __init acpi_pnp_match(struct device *dev, void *_pnp)
 	struct pnp_dev *pnp = _pnp;
 
 	/* true means it matched */
-	return acpi->flags.hardware_id
-	    && !acpi_get_physical_device(acpi->handle)
-	    && compare_pnp_id(pnp->id, acpi->pnp.hardware_id);
+	return !acpi_get_physical_device(acpi->handle)
+	    && compare_pnp_id(pnp->id, acpi_device_hid(acpi));
 }
 
 static int __init acpi_pnp_find_device(struct device *dev, acpi_handle * handle)

include/acpi/acpi_bus.h

@@ -70,7 +70,6 @@ enum acpi_bus_device_type {
 	ACPI_BUS_TYPE_POWER,
 	ACPI_BUS_TYPE_PROCESSOR,
 	ACPI_BUS_TYPE_THERMAL,
-	ACPI_BUS_TYPE_SYSTEM,
 	ACPI_BUS_TYPE_POWER_BUTTON,
 	ACPI_BUS_TYPE_SLEEP_BUTTON,
 	ACPI_BUS_DEVICE_TYPE_COUNT
@@ -142,10 +141,7 @@ struct acpi_device_status {
 
 struct acpi_device_flags {
 	u32 dynamic_status:1;
-	u32 hardware_id:1;
-	u32 compatible_ids:1;
 	u32 bus_address:1;
-	u32 unique_id:1;
 	u32 removable:1;
 	u32 ejectable:1;
 	u32 lockable:1;
@@ -154,7 +150,7 @@ struct acpi_device_flags {
 	u32 performance_manageable:1;
 	u32 wake_capable:1;	/* Wakeup(_PRW) supported? */
 	u32 force_power_state:1;
-	u32 reserved:19;
+	u32 reserved:22;
 };
 
 /* File System */
@@ -172,20 +168,23 @@ typedef unsigned long acpi_bus_address;
 typedef char acpi_device_name[40];
 typedef char acpi_device_class[20];
 
+struct acpi_hardware_id {
+	struct list_head list;
+	char *id;
+};
+
 struct acpi_device_pnp {
 	acpi_bus_id bus_id;	/* Object name */
 	acpi_bus_address bus_address;	/* _ADR */
-	char *hardware_id;	/* _HID */
-	struct acpica_device_id_list *cid_list;	/* _CIDs */
 	char *unique_id;	/* _UID */
+	struct list_head ids;		/* _HID and _CIDs */
 	acpi_device_name device_name;	/* Driver-determined */
 	acpi_device_class device_class;	/*        "          */
 };
 
 #define acpi_device_bid(d)	((d)->pnp.bus_id)
 #define acpi_device_adr(d)	((d)->pnp.bus_address)
-#define acpi_device_hid(d)	((d)->pnp.hardware_id)
-#define acpi_device_uid(d)	((d)->pnp.unique_id)
+char *acpi_device_hid(struct acpi_device *device);
 #define acpi_device_name(d)	((d)->pnp.device_name)
 #define acpi_device_class(d)	((d)->pnp.device_class)
 
@@ -262,7 +261,8 @@ struct acpi_device_wakeup {
 /* Device */
 
 struct acpi_device {
-	acpi_handle handle;
+	int device_type;
+	acpi_handle handle;		/* no handle for fixed hardware */
 	struct acpi_device *parent;
 	struct list_head children;
 	struct list_head node;
@@ -322,6 +322,8 @@ extern void unregister_acpi_bus_notifier(struct notifier_block *nb);
 
 int acpi_bus_get_device(acpi_handle handle, struct acpi_device **device);
 void acpi_bus_data_handler(acpi_handle handle, void *context);
+acpi_status acpi_bus_get_status_handle(acpi_handle handle,
+				       unsigned long long *sta);
 int acpi_bus_get_status(struct acpi_device *device);
 int acpi_bus_get_power(acpi_handle handle, int *state);
 int acpi_bus_set_power(acpi_handle handle, int state);