Skip to content

L
linux
Commit 7772e380 authored by Antti Palosaari's avatar Antti Palosaari Committed by Mauro Carvalho Chehab
Browse files
Options

media: af9015: enhance streaming config 

Replace static stream settings by one which enables and disables
stream interface when needed (TS streaming control).

1) Configure both TS IF and USB endpoints according to current use case

2) Disable streaming USB endpoints when streaming is stopped and
enable when streaming is started. Reduces sleep power consumption
slightly.

3) Reduce USB buffersize slightly, from 130848 to 98136 bytes
Signed-off-by: default avatarAntti Palosaari <crope@iki.fi>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@s-opensource.com>
parent 0092293e
Hide whitespace changes
Inline Side-by-side
Showing with 115 additions and 119 deletions
drivers/media/usb/dvb-usb-v2/af9015.c
View file @ 7772e380
......@@ -607,11 +607,121 @@ static int af9015_get_stream_config(struct dvb_frontend *fe, u8 *ts_type,
dev_dbg(&intf->dev, "adap %u\n", fe_to_adap(fe)->id);
if (d->udev->speed == USB_SPEED_FULL)
stream->u.bulk.buffersize = TS_USB11_FRAME_SIZE;
stream->u.bulk.buffersize = 5 * 188;
return 0;
}
static int af9015_streaming_ctrl(struct dvb_frontend *fe, int onoff)
{
struct dvb_usb_device *d = fe_to_d(fe);
struct af9015_state *state = d_to_priv(d);
struct usb_interface *intf = d->intf;
int ret;
unsigned int utmp1, utmp2, reg1, reg2;
u8 buf[2];
const unsigned int adap_id = fe_to_adap(fe)->id;
dev_dbg(&intf->dev, "adap id %d, onoff %d\n", adap_id, onoff);
if (state->usb_ts_if_configured[adap_id] == false) {
dev_dbg(&intf->dev, "set usb and ts interface\n");
/* USB IF stream settings */
utmp1 = (d->udev->speed == USB_SPEED_FULL ? 5 : 87) * 188 / 4;
utmp2 = (d->udev->speed == USB_SPEED_FULL ? 64 : 512) / 4;
buf[0] = (utmp1 >> 0) & 0xff;
buf[1] = (utmp1 >> 8) & 0xff;
if (adap_id == 0) {
/* 1st USB IF (EP4) stream settings */
reg1 = 0xdd88;
reg2 = 0xdd0c;
} else {
/* 2nd USB IF (EP5) stream settings */
reg1 = 0xdd8a;
reg2 = 0xdd0d;
}
ret = af9015_write_regs(d, reg1, buf, 2);
if (ret)
goto err;
ret = af9015_write_reg(d, reg2, utmp2);
if (ret)
goto err;
/* TS IF settings */
if (state->dual_mode) {
ret = af9015_set_reg_bit(d, 0xd50b, 0);
if (ret)
goto err;
ret = af9015_set_reg_bit(d, 0xd520, 4);
if (ret)
goto err;
} else {
ret = af9015_clear_reg_bit(d, 0xd50b, 0);
if (ret)
goto err;
ret = af9015_clear_reg_bit(d, 0xd520, 4);
if (ret)
goto err;
}
state->usb_ts_if_configured[adap_id] = true;
}
if (adap_id == 0 && onoff) {
/* Adapter 0 stream on. EP4: clear NAK, enable, clear reset */
ret = af9015_clear_reg_bit(d, 0xdd13, 5);
if (ret)
goto err;
ret = af9015_set_reg_bit(d, 0xdd11, 5);
if (ret)
goto err;
ret = af9015_clear_reg_bit(d, 0xd507, 2);
if (ret)
goto err;
} else if (adap_id == 1 && onoff) {
/* Adapter 1 stream on. EP5: clear NAK, enable, clear reset */
ret = af9015_clear_reg_bit(d, 0xdd13, 6);
if (ret)
goto err;
ret = af9015_set_reg_bit(d, 0xdd11, 6);
if (ret)
goto err;
ret = af9015_clear_reg_bit(d, 0xd50b, 1);
if (ret)
goto err;
} else if (adap_id == 0 && !onoff) {
/* Adapter 0 stream off. EP4: set reset, disable, set NAK */
ret = af9015_set_reg_bit(d, 0xd507, 2);
if (ret)
goto err;
ret = af9015_clear_reg_bit(d, 0xdd11, 5);
if (ret)
goto err;
ret = af9015_set_reg_bit(d, 0xdd13, 5);
if (ret)
goto err;
} else if (adap_id == 1 && !onoff) {
/* Adapter 1 stream off. EP5: set reset, disable, set NAK */
ret = af9015_set_reg_bit(d, 0xd50b, 1);
if (ret)
goto err;
ret = af9015_clear_reg_bit(d, 0xdd11, 6);
if (ret)
goto err;
ret = af9015_set_reg_bit(d, 0xdd13, 6);
if (ret)
goto err;
}
return 0;
err:
dev_dbg(&intf->dev, "failed %d\n", ret);
return ret;
}
static int af9015_get_adapter_count(struct dvb_usb_device *d)
{
struct af9015_state *state = d_to_priv(d);
......@@ -1061,105 +1171,6 @@ static int af9015_pid_filter(struct dvb_usb_adapter *adap, int index,
return ret;
}
static int af9015_init_endpoint(struct dvb_usb_device *d)
{
struct af9015_state *state = d_to_priv(d);
struct usb_interface *intf = d->intf;
int ret;
u16 frame_size;
u8 packet_size;
dev_dbg(&intf->dev, "usb speed %u\n", d->udev->speed);
if (d->udev->speed == USB_SPEED_FULL) {
frame_size = TS_USB11_FRAME_SIZE/4;
packet_size = TS_USB11_MAX_PACKET_SIZE/4;
} else {
frame_size = TS_USB20_FRAME_SIZE/4;
packet_size = TS_USB20_MAX_PACKET_SIZE/4;
}
ret = af9015_set_reg_bit(d, 0xd507, 2); /* assert EP4 reset */
if (ret)
goto error;
ret = af9015_set_reg_bit(d, 0xd50b, 1); /* assert EP5 reset */
if (ret)
goto error;
ret = af9015_clear_reg_bit(d, 0xdd11, 5); /* disable EP4 */
if (ret)
goto error;
ret = af9015_clear_reg_bit(d, 0xdd11, 6); /* disable EP5 */
if (ret)
goto error;
ret = af9015_set_reg_bit(d, 0xdd11, 5); /* enable EP4 */
if (ret)
goto error;
if (state->dual_mode) {
ret = af9015_set_reg_bit(d, 0xdd11, 6); /* enable EP5 */
if (ret)
goto error;
}
ret = af9015_clear_reg_bit(d, 0xdd13, 5); /* disable EP4 NAK */
if (ret)
goto error;
if (state->dual_mode) {
ret = af9015_clear_reg_bit(d, 0xdd13, 6); /* disable EP5 NAK */
if (ret)
goto error;
}
/* EP4 xfer length */
ret = af9015_write_reg(d, 0xdd88, frame_size & 0xff);
if (ret)
goto error;
ret = af9015_write_reg(d, 0xdd89, frame_size >> 8);
if (ret)
goto error;
/* EP5 xfer length */
ret = af9015_write_reg(d, 0xdd8a, frame_size & 0xff);
if (ret)
goto error;
ret = af9015_write_reg(d, 0xdd8b, frame_size >> 8);
if (ret)
goto error;
ret = af9015_write_reg(d, 0xdd0c, packet_size); /* EP4 packet size */
if (ret)
goto error;
ret = af9015_write_reg(d, 0xdd0d, packet_size); /* EP5 packet size */
if (ret)
goto error;
ret = af9015_clear_reg_bit(d, 0xd507, 2); /* negate EP4 reset */
if (ret)
goto error;
if (state->dual_mode) {
ret = af9015_clear_reg_bit(d, 0xd50b, 1); /* negate EP5 reset */
if (ret)
goto error;
}
/* enable / disable mp2if2 */
if (state->dual_mode) {
ret = af9015_set_reg_bit(d, 0xd50b, 0);
if (ret)
goto error;
ret = af9015_set_reg_bit(d, 0xd520, 4);
if (ret)
goto error;
} else {
ret = af9015_clear_reg_bit(d, 0xd50b, 0);
if (ret)
goto error;
ret = af9015_clear_reg_bit(d, 0xd520, 4);
if (ret)
goto error;
}
error:
if (ret)
dev_err(&intf->dev, "endpoint init failed %d\n", ret);
return ret;
}
static int af9015_init(struct dvb_usb_device *d)
{
struct af9015_state *state = d_to_priv(d);
......@@ -1175,10 +1186,6 @@ static int af9015_init(struct dvb_usb_device *d)
if (ret)
goto error;
ret = af9015_init_endpoint(d);
if (ret)
goto error;
error:
return ret;
}
......@@ -1412,6 +1419,7 @@ static struct dvb_usb_device_properties af9015_props = {
.init = af9015_init,
.get_rc_config = af9015_get_rc_config,
.get_stream_config = af9015_get_stream_config,
.streaming_ctrl = af9015_streaming_ctrl,
.get_adapter_count = af9015_get_adapter_count,
.adapter = {
......@@ -1422,7 +1430,7 @@ static struct dvb_usb_device_properties af9015_props = {
.pid_filter = af9015_pid_filter,
.pid_filter_ctrl = af9015_pid_filter_ctrl,
.stream = DVB_USB_STREAM_BULK(0x84, 8, TS_USB20_FRAME_SIZE),
.stream = DVB_USB_STREAM_BULK(0x84, 6, 87 * 188),
}, {
.caps = DVB_USB_ADAP_HAS_PID_FILTER |
DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
......@@ -1430,7 +1438,7 @@ static struct dvb_usb_device_properties af9015_props = {
.pid_filter = af9015_pid_filter,
.pid_filter_ctrl = af9015_pid_filter_ctrl,
.stream = DVB_USB_STREAM_BULK(0x85, 8, TS_USB20_FRAME_SIZE),
.stream = DVB_USB_STREAM_BULK(0x85, 6, 87 * 188),
},
},
};
......
drivers/media/usb/dvb-usb-v2/af9015.h
View file @ 7772e380
......@@ -34,19 +34,6 @@
#define AF9015_FIRMWARE "dvb-usb-af9015.fw"
/* Windows driver uses packet count 21 for USB1.1 and 348 for USB2.0.
We use smaller - about 1/4 from the original, 5 and 87. */
#define TS_PACKET_SIZE 188
#define TS_USB20_PACKET_COUNT 87
#define TS_USB20_FRAME_SIZE (TS_PACKET_SIZE*TS_USB20_PACKET_COUNT)
#define TS_USB11_PACKET_COUNT 5
#define TS_USB11_FRAME_SIZE (TS_PACKET_SIZE*TS_USB11_PACKET_COUNT)
#define TS_USB20_MAX_PACKET_SIZE 512
#define TS_USB11_MAX_PACKET_SIZE 64
#define AF9015_I2C_EEPROM 0x50
#define AF9015_I2C_DEMOD 0x1c
#define AF9015_USB_TIMEOUT 2000
......@@ -128,6 +115,7 @@ struct af9015_state {
struct af9013_platform_data af9013_pdata[2];
struct i2c_client *demod_i2c_client[2];
u8 af9013_i2c_addr[2];
bool usb_ts_if_configured[2];
/* for demod callback override */
int (*set_frontend[2]) (struct dvb_frontend *fe);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7