scsi: qla2xxx: Add protection mask module parameters

Allow user to selectively enable/disable DIF/DIX protection
capabilities mask.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

drivers/scsi/qla2xxx/qla_os.c

@@ -285,6 +285,20 @@ MODULE_PARM_DESC(qla2xuseresexchforels,
 		 "Reserve 1/2 of emergency exchanges for ELS.\n"
 		 " 0 (default): disabled");
 
+int ql2xprotmask;
+module_param(ql2xprotmask, int, 0644);
+MODULE_PARM_DESC(ql2xprotmask,
+		 "Override DIF/DIX protection capabilities mask\n"
+		 "Default is 0 which sets protection mask based on "
+		 "capabilities reported by HBA firmware.\n");
+
+int ql2xprotguard;
+module_param(ql2xprotguard, int, 0644);
+MODULE_PARM_DESC(ql2xprotguard, "Override choice of DIX checksum\n"
+		 "  0 -- Let HBA firmware decide\n"
+		 "  1 -- Force T10 CRC\n"
+		 "  2 -- Force IP checksum\n");
+
 /*
  * SCSI host template entry points
  */
@@ -3342,13 +3356,16 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 			    "Registering for DIF/DIX type 1 and 3 protection.\n");
 			if (ql2xenabledif == 1)
 				prot = SHOST_DIX_TYPE0_PROTECTION;
-			scsi_host_set_prot(host,
-			    prot | SHOST_DIF_TYPE1_PROTECTION
-			    | SHOST_DIF_TYPE2_PROTECTION
-			    | SHOST_DIF_TYPE3_PROTECTION
-			    | SHOST_DIX_TYPE1_PROTECTION
-			    | SHOST_DIX_TYPE2_PROTECTION
-			    | SHOST_DIX_TYPE3_PROTECTION);
+			if (ql2xprotmask)
+				scsi_host_set_prot(host, ql2xprotmask);
+			else
+				scsi_host_set_prot(host,
+				    prot | SHOST_DIF_TYPE1_PROTECTION
+				    | SHOST_DIF_TYPE2_PROTECTION
+				    | SHOST_DIF_TYPE3_PROTECTION
+				    | SHOST_DIX_TYPE1_PROTECTION
+				    | SHOST_DIX_TYPE2_PROTECTION
+				    | SHOST_DIX_TYPE3_PROTECTION);
 
 			guard = SHOST_DIX_GUARD_CRC;
 
@@ -3356,7 +3373,10 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 			    (ql2xenabledif > 1 || IS_PI_DIFB_DIX0_CAPABLE(ha)))
 				guard |= SHOST_DIX_GUARD_IP;
 
-			scsi_host_set_guard(host, guard);
+			if (ql2xprotguard)
+				scsi_host_set_guard(host, ql2xprotguard);
+			else
+				scsi_host_set_guard(host, guard);
 		} else
 			base_vha->flags.difdix_supported = 0;
 	}