Commit 7c2c8f42 authored by Stanimir Varbanov's avatar Stanimir Varbanov Committed by Mauro Carvalho Chehab

[media] omap3isp: Use isp xclk defines

Use isp defines for isp xclk selection in isp_set_xclk().
Signed-off-by: default avatarStanimir Varbanov <svarbanov@mm-sol.com>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
parent 994d5375
......@@ -215,20 +215,21 @@ static u32 isp_set_xclk(struct isp_device *isp, u32 xclk, u8 xclksel)
}
switch (xclksel) {
case 0:
case ISP_XCLK_A:
isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_MAIN, ISP_TCTRL_CTRL,
ISPTCTRL_CTRL_DIVA_MASK,
divisor << ISPTCTRL_CTRL_DIVA_SHIFT);
dev_dbg(isp->dev, "isp_set_xclk(): cam_xclka set to %d Hz\n",
currentxclk);
break;
case 1:
case ISP_XCLK_B:
isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_MAIN, ISP_TCTRL_CTRL,
ISPTCTRL_CTRL_DIVB_MASK,
divisor << ISPTCTRL_CTRL_DIVB_SHIFT);
dev_dbg(isp->dev, "isp_set_xclk(): cam_xclkb set to %d Hz\n",
currentxclk);
break;
case ISP_XCLK_NONE:
default:
omap3isp_put(isp);
dev_dbg(isp->dev, "ISP_ERR: isp_set_xclk(): Invalid requested "
......@@ -237,13 +238,13 @@ static u32 isp_set_xclk(struct isp_device *isp, u32 xclk, u8 xclksel)
}
/* Do we go from stable whatever to clock? */
if (divisor >= 2 && isp->xclk_divisor[xclksel] < 2)
if (divisor >= 2 && isp->xclk_divisor[xclksel - 1] < 2)
omap3isp_get(isp);
/* Stopping the clock. */
else if (divisor < 2 && isp->xclk_divisor[xclksel] >= 2)
else if (divisor < 2 && isp->xclk_divisor[xclksel - 1] >= 2)
omap3isp_put(isp);
isp->xclk_divisor[xclksel] = divisor;
isp->xclk_divisor[xclksel - 1] = divisor;
omap3isp_put(isp);
......
......@@ -314,9 +314,9 @@ void omap3isp_configure_bridge(struct isp_device *isp,
enum ccdc_input_entity input,
const struct isp_parallel_platform_data *pdata);
#define ISP_XCLK_NONE -1
#define ISP_XCLK_A 0
#define ISP_XCLK_B 1
#define ISP_XCLK_NONE 0
#define ISP_XCLK_A 1
#define ISP_XCLK_B 2
struct isp_device *omap3isp_get(struct isp_device *isp);
void omap3isp_put(struct isp_device *isp);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment