Commit 7c5798ab authored by Krzysztof Kozlowski's avatar Krzysztof Kozlowski Committed by Rob Herring

dt-bindings: connector: Convert Samsung 11-pin USB bindings to dtschema

Add Samsung 11-pin USB-C connector into standard dtschema bindings file.
Signed-off-by: default avatarKrzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200829142501.31478-5-krzk@kernel.orgSigned-off-by: default avatarRob Herring <robh@kernel.org>
parent d8db9dc3
Samsung micro-USB 11-pin connector
==================================
Samsung micro-USB 11-pin connector is an extension of micro-USB connector.
It is present in multiple Samsung mobile devices.
It has additional pins to route MHL traffic simultanously with USB.
The bindings are superset of usb-connector bindings for micro-USB connector[1].
Required properties:
- compatible: must be: "samsung,usb-connector-11pin", "usb-b-connector",
- type: must be "micro".
Required nodes:
- any data bus to the connector should be modeled using the OF graph bindings
specified in bindings/graph.txt, unless the bus is between parent node and
the connector. Since single connector can have multpile data buses every bus
has assigned OF graph port number as follows:
0: High Speed (HS),
3: Mobile High-Definition Link (MHL), specific to 11-pin Samsung micro-USB.
[1]: bindings/connector/usb-connector.yaml
Example
-------
Micro-USB connector with HS lines routed via controller (MUIC) and MHL lines
connected to HDMI-MHL bridge (sii8620):
muic-max77843@66 {
...
usb_con: connector {
compatible = "samsung,usb-connector-11pin", "usb-b-connector";
label = "micro-USB";
type = "micro";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@3 {
reg = <3>;
usb_con_mhl: endpoint {
remote-endpoint = <&sii8620_mhl>;
};
};
};
};
};
......@@ -25,6 +25,10 @@ properties:
- const: gpio-usb-b-connector
- const: usb-b-connector
- items:
- const: samsung,usb-connector-11pin
- const: usb-b-connector
label:
description: Symbolic name for the connector.
......@@ -158,6 +162,16 @@ allOf:
- required:
- id-gpios
- if:
properties:
compatible:
contains:
const: samsung,usb-connector-11pin
then:
properties:
type:
const: micro
examples:
# Micro-USB connector with HS lines routed via controller (MUIC).
- |
......@@ -233,3 +247,33 @@ examples:
vbus-supply = <&usb_p0_vbus>;
};
};
# Micro-USB connector with HS lines routed via controller (MUIC) and MHL
# lines connected to HDMI-MHL bridge (sii8620) on Samsung Exynos5433-based
# mobile phone
- |
muic-max77843 {
usb_con4: connector {
compatible = "samsung,usb-connector-11pin", "usb-b-connector";
label = "micro-USB";
type = "micro";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
muic_to_usb: endpoint {
remote-endpoint = <&usb_to_muic>;
};
};
port@3 {
reg = <3>;
usb_con_mhl: endpoint {
remote-endpoint = <&sii8620_mhl>;
};
};
};
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment