Merge tag 'renesas-dt2-for-v4.14' of...

Merge tag 'renesas-dt2-for-v4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Pull "Second Round of Renesas ARM Based SoC DT Updates for v4.14" from Simon Horman:

* Use newly added Gen-3 fallback compat string

  This is consistent with ongoing efforts to use per-generation
  fallback strings where appropriate across devices found
  on R-Car SoCs. The aim of the effort being to strike a balance
  between the limited information available about the compatibility
  of devices found on different SoCs and the desire to ease enabling
  devices on new SoCs.

  This has no run-time effect due to the presence of a per-SoC
  compat string.

* Enable second CPU core on RZ/G1M (r8a7743)

  The RZ/G1M has two CA15 cores running at up to 1.5GHz

* Enable frequency scaling on RZ/G1M (r8a7743)

* Add six I2C cores to RZ/G1M (r8a7743) SoC DT

  This is a step towards enabling these cores on boards that use this SoC

* Add CEC clock for HDMI transmitter to R-Car M2-W (r8a7791) Koelsch

  Hans Verkuil says "The adv7511 on the Koelsch board has a 12 MHz fixed
  clock for the CEC block. Specify this in the dts to enable CEC support."

* Add PFC support to RZ/G1E (r8a7745) SoC and add Ethernet and SCIF2
  pins to SK-RZG1E board.

  This allows the kernel to control multiplexed pins for Ethernet
  and SCIF2 rather than relying on setup inherited at boot.

* tag 'renesas-dt2-for-v4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: dts: r8a7791: Use R-Car SATA Gen2 fallback compat string
  ARM: dts: r8a7790: Use R-Car SATA Gen2 fallback compat string
  ARM: dts: r8a7743: Add OPP table for frequency scaling
  ARM: dts: r8a7743: Add APMU node and second CPU core
  ARM: dts: koelsch: Add CEC clock for HDMI transmitter
  ARM: dts: sk-rzg1e: add Ether pins
  ARM: dts: sk-rzg1e: add SCIF2 pins
  ARM: dts: r8a7745: add PFC support
  ARM: dts: r8a7743: Add I2C DT support

arch/arm/boot/dts/r8a7743.dtsi

@@ -18,9 +18,19 @@ / {
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
+		enable-method = "renesas,apmu";
 
 		cpu0: cpu@0 {
 			device_type = "cpu";
@@ -28,8 +38,26 @@ cpu0: cpu@0 {
 			reg = <0>;
 			clock-frequency = <1500000000>;
 			clocks = <&cpg CPG_CORE R8A7743_CLK_Z>;
+			clock-latency = <300000>; /* 300 us */
 			power-domains = <&sysc R8A7743_PD_CA15_CPU0>;
 			next-level-cache = <&L2_CA15>;
+
+			/* kHz - uV - OPPs unknown yet */
+			operating-points = <1500000 1000000>,
+					   <1312500 1000000>,
+					   <1125000 1000000>,
+					   < 937500 1000000>,
+					   < 750000 1000000>,
+					   < 375000 1000000>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <1>;
+			clock-frequency = <1500000000>;
+			power-domains = <&sysc R8A7743_PD_CA15_CPU1>;
+			next-level-cache = <&L2_CA15>;
 		};
 
 		L2_CA15: cache-controller-0 {
@@ -48,6 +76,12 @@ soc {
 		#size-cells = <2>;
 		ranges;
 
+		apmu@e6152000 {
+			compatible = "renesas,r8a7743-apmu", "renesas,apmu";
+			reg = <0 0xe6152000 0 0x188>;
+			cpus = <&cpu0 &cpu1>;
+		};
+
 		gic: interrupt-controller@f1001000 {
 			compatible = "arm,gic-400";
 			#interrupt-cells = <3>;
@@ -314,6 +348,94 @@ GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
 			dma-channels = <15>;
 		};
 
+		/* The memory map in the User's Manual maps the cores to bus
+		 *  numbers
+		 */
+		i2c0: i2c@e6508000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7743",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6508000 0 0x40>;
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 931>;
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 931>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e6518000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7743",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6518000 0 0x40>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 930>;
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 930>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e6530000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7743",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6530000 0 0x40>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 929>;
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 929>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e6540000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7743",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6540000 0 0x40>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 928>;
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 928>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@e6520000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7743",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6520000 0 0x40>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 927>;
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 927>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@e6528000 {
+			/* doesn't need pinmux */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7743",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6528000 0 0x40>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 925>;
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 925>;
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
 		scifa0: serial@e6c40000 {
 			compatible = "renesas,scifa-r8a7743",
 				     "renesas,rcar-gen2-scifa", "renesas,scifa";

arch/arm/boot/dts/r8a7745-sk-rzg1e.dts

 /*
  * Device Tree Source for the SK-RZG1E board
  *
- * Copyright (C) 2016 Cogent Embedded, Inc.
+ * Copyright (C) 2016-2017 Cogent Embedded, Inc.
  *
  * This file is licensed under the terms of the GNU General Public License
  * version 2. This program is licensed "as is" without any warranty of any
@@ -34,11 +34,34 @@ &extal_clk {
 	clock-frequency = <20000000>;
 };
 
+&pfc {
+	scif2_pins: scif2 {
+		groups = "scif2_data";
+		function = "scif2";
+	};
+
+	ether_pins: ether {
+		groups = "eth_link", "eth_mdio", "eth_rmii";
+		function = "eth";
+	};
+
+	phy1_pins: phy1 {
+		groups = "intc_irq8";
+		function = "intc";
+	};
+};
+
 &scif2 {
+	pinctrl-0 = <&scif2_pins>;
+	pinctrl-names = "default";
+
 	status = "okay";
 };
 
 &ether {
+	pinctrl-0 = <&ether_pins &phy1_pins>;
+	pinctrl-names = "default";
+
 	phy-handle = <&phy1>;
 	renesas,ether-link-active-low;
 	status = "okay";

arch/arm/boot/dts/r8a7745.dtsi

 /*
  * Device Tree Source for the r8a7745 SoC
  *
- * Copyright (C) 2016 Cogent Embedded Inc.
+ * Copyright (C) 2016-2017 Cogent Embedded Inc.
  *
  * This file is licensed under the terms of the GNU General Public License
  * version 2. This program is licensed "as is" without any warranty of any
@@ -123,6 +123,11 @@ sysc: system-controller@e6180000 {
 			#power-domain-cells = <1>;
 		};
 
+		pfc: pin-controller@e6060000 {
+			compatible = "renesas,pfc-r8a7745";
+			reg = <0 0xe6060000 0 0x11c>;
+		};
+
 		dmac0: dma-controller@e6700000 {
 			compatible = "renesas,dmac-r8a7745",
 				     "renesas,rcar-dmac";

arch/arm/boot/dts/r8a7790.dtsi

@@ -873,7 +873,7 @@ avb: ethernet@e6800000 {
 	};
 
 	sata0: sata@ee300000 {
-		compatible = "renesas,sata-r8a7790";
+		compatible = "renesas,sata-r8a7790", "renesas,rcar-gen2-sata";
 		reg = <0 0xee300000 0 0x2000>;
 		interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp8_clks R8A7790_CLK_SATA0>;
@@ -882,7 +882,7 @@ sata0: sata@ee300000 {
 	};
 
 	sata1: sata@ee500000 {
-		compatible = "renesas,sata-r8a7790";
+		compatible = "renesas,sata-r8a7790", "renesas,rcar-gen2-sata";
 		reg = <0 0xee500000 0 0x2000>;
 		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp8_clks R8A7790_CLK_SATA1>;

arch/arm/boot/dts/r8a7791-koelsch.dts

@@ -642,11 +642,19 @@ adv7180: endpoint {
 		};
 	};
 
+	cec_clock: cec-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12000000>;
+	};
+
 	hdmi@39 {
 		compatible = "adi,adv7511w";
 		reg = <0x39>;
 		interrupt-parent = <&gpio3>;
 		interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&cec_clock>;
+		clock-names = "cec";
 
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";

arch/arm/boot/dts/r8a7791.dtsi

@@ -933,7 +933,7 @@ avb: ethernet@e6800000 {
 	};
 
 	sata0: sata@ee300000 {
-		compatible = "renesas,sata-r8a7791";
+		compatible = "renesas,sata-r8a7791", "renesas,rcar-gen2-sata";
 		reg = <0 0xee300000 0 0x2000>;
 		interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp8_clks R8A7791_CLK_SATA0>;
@@ -942,7 +942,7 @@ sata0: sata@ee300000 {
 	};
 
 	sata1: sata@ee500000 {
-		compatible = "renesas,sata-r8a7791";
+		compatible = "renesas,sata-r8a7791", "renesas,rcar-gen2-sata";
 		reg = <0 0xee500000 0 0x2000>;
 		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp8_clks R8A7791_CLK_SATA1>;