xhci: Store information about roothubs and TTs.
For upcoming patches, we need to keep information about the bandwidth domains under the xHCI host. Each root port is a separate primary bandwidth domain, and each high speed hub's TT (and potentially each port on a multi-TT hub) is a secondary bandwidth domain. If the table were in text form, it would look a bit like this: EP Interval Sum of Number Largest Max Max Packet of Packets Packet Size Overhead 0 N mps overhead ... 15 N mps overhead Overhead is the maximum packet overhead (for bit stuffing, CRC, protocol overhead, etc) for all the endpoints in this interval. Devices with different speeds have different max packet overhead. For example, if there is a low speed and a full speed endpoint that both have an interval of 3, we would use the higher overhead (the low speed overhead). Interval 0 is a bit special, since we really just want to know the sum of the max ESIT payloads instead of the largest max packet size. That's stored in the interval0_esit_payload variable. For root ports, we also need to keep track of the number of active TTs. For each root port, and each TT under a root port, store some information about the bandwidth consumption. Dynamically allocate an array of root port bandwidth information for the number of root ports on the xHCI host. Each root port stores a list of TTs under the root port. A single TT hub only has one entry in the list, but a multi-TT hub will have an entry per port. When the USB core says that a USB device is a hub, create one or more entries in the root port TT list for the hub. When a device is deleted, and it is a hub, search through the root port TT list and delete all TT entries for the hub. Keep track of which TT entry is associated with a device under a TT. LS/FS devices attached directly to the root port will have usb_device->tt set to the roothub. Ignore that, and treat it like a primary bandwidth domain, since there isn't really a high speed bus between the roothub and the host. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Showing
Please register or sign in to comment