m68knommu: enable qspi support when SPI_COLDFIRE_QSPI = m

Enable Coldfire QSPI support when SPI_COLDFIRE_QSPI is built as a module.

This version of the patch combines changes to the config files and  device.c
and uses IF_ENABLED (thanks to Sam Ravnborg for the suggestion).
Signed-off-by: Steven King <sfking@fdwdc.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>

arch/m68k/platform/520x/config.c

@@ -22,7 +22,7 @@
 
 /***************************************************************************/
 
-#ifdef CONFIG_SPI_COLDFIRE_QSPI
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
 
 static void __init m520x_qspi_init(void)
 {
@@ -35,7 +35,7 @@ static void __init m520x_qspi_init(void)
 	writew(par, MCF_GPIO_PAR_UART);
 }
 
-#endif /* CONFIG_SPI_COLDFIRE_QSPI */
+#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
 
 /***************************************************************************/
 
@@ -79,7 +79,7 @@ void __init config_BSP(char *commandp, int size)
 	mach_sched_init = hw_timer_init;
 	m520x_uarts_init();
 	m520x_fec_init();
-#ifdef CONFIG_SPI_COLDFIRE_QSPI
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
 	m520x_qspi_init();
 #endif
 }

arch/m68k/platform/523x/config.c

@@ -22,7 +22,7 @@
 
 /***************************************************************************/
 
-#ifdef CONFIG_SPI_COLDFIRE_QSPI
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
 
 static void __init m523x_qspi_init(void)
 {
@@ -36,7 +36,7 @@ static void __init m523x_qspi_init(void)
 	writew(par, MCFGPIO_PAR_TIMER);
 }
 
-#endif /* CONFIG_SPI_COLDFIRE_QSPI */
+#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
 
 /***************************************************************************/
 
@@ -58,7 +58,7 @@ void __init config_BSP(char *commandp, int size)
 {
 	mach_sched_init = hw_timer_init;
 	m523x_fec_init();
-#ifdef CONFIG_SPI_COLDFIRE_QSPI
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
 	m523x_qspi_init();
 #endif
 }

arch/m68k/platform/5249/config.c

@@ -51,7 +51,7 @@ static struct platform_device *m5249_devices[] __initdata = {
 
 /***************************************************************************/
 
-#ifdef CONFIG_SPI_COLDFIRE_QSPI
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
 
 static void __init m5249_qspi_init(void)
 {
@@ -61,7 +61,7 @@ static void __init m5249_qspi_init(void)
 	mcf_mapirq2imr(MCF_IRQ_QSPI, MCFINTC_QSPI);
 }
 
-#endif /* CONFIG_SPI_COLDFIRE_QSPI */
+#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
 
 /***************************************************************************/
 
@@ -90,7 +90,7 @@ void __init config_BSP(char *commandp, int size)
 #ifdef CONFIG_M5249C3
 	m5249_smc91x_init();
 #endif
-#ifdef CONFIG_SPI_COLDFIRE_QSPI
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
 	m5249_qspi_init();
 #endif
 }

arch/m68k/platform/527x/config.c

@@ -23,7 +23,7 @@
 
 /***************************************************************************/
 
-#ifdef CONFIG_SPI_COLDFIRE_QSPI
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
 
 static void __init m527x_qspi_init(void)
 {
@@ -42,7 +42,7 @@ static void __init m527x_qspi_init(void)
 #endif
 }
 
-#endif /* CONFIG_SPI_COLDFIRE_QSPI */
+#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
 
 /***************************************************************************/
 
@@ -90,7 +90,7 @@ void __init config_BSP(char *commandp, int size)
 	mach_sched_init = hw_timer_init;
 	m527x_uarts_init();
 	m527x_fec_init();
-#ifdef CONFIG_SPI_COLDFIRE_QSPI
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
 	m527x_qspi_init();
 #endif
 }

arch/m68k/platform/528x/config.c

@@ -24,7 +24,7 @@
 
 /***************************************************************************/
 
-#ifdef CONFIG_SPI_COLDFIRE_QSPI
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
 
 static void __init m528x_qspi_init(void)
 {
@@ -32,7 +32,7 @@ static void __init m528x_qspi_init(void)
 	__raw_writeb(0x07, MCFGPIO_PQSPAR);
 }
 
-#endif /* CONFIG_SPI_COLDFIRE_QSPI */
+#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
 
 /***************************************************************************/
 
@@ -98,7 +98,7 @@ void __init config_BSP(char *commandp, int size)
 	mach_sched_init = hw_timer_init;
 	m528x_uarts_init();
 	m528x_fec_init();
-#ifdef CONFIG_SPI_COLDFIRE_QSPI
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
 	m528x_qspi_init();
 #endif
 }

arch/m68k/platform/532x/config.c

@@ -30,7 +30,7 @@
 
 /***************************************************************************/
 
-#ifdef CONFIG_SPI_COLDFIRE_QSPI
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
 
 static void __init m532x_qspi_init(void)
 {
@@ -38,7 +38,7 @@ static void __init m532x_qspi_init(void)
 	writew(0x01f0, MCF_GPIO_PAR_QSPI);
 }
 
-#endif /* CONFIG_SPI_COLDFIRE_QSPI */
+#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
 
 /***************************************************************************/
 
@@ -77,7 +77,7 @@ void __init config_BSP(char *commandp, int size)
 	mach_sched_init = hw_timer_init;
 	m532x_uarts_init();
 	m532x_fec_init();
-#ifdef CONFIG_SPI_COLDFIRE_QSPI
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
 	m532x_qspi_init();
 #endif
 

arch/m68k/platform/coldfire/device.c

@@ -121,7 +121,7 @@ static struct platform_device mcf_fec1 = {
 #endif /* MCFFEC_BASE1 */
 #endif /* CONFIG_FEC */
 
-#ifdef CONFIG_SPI_COLDFIRE_QSPI
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
 /*
  *	The ColdFire QSPI module is an SPI protocol hardware block used
  *	on a number of different ColdFire CPUs.
@@ -274,7 +274,7 @@ static struct platform_device mcf_qspi = {
 	.resource		= mcf_qspi_resources,
 	.dev.platform_data	= &mcf_qspi_data,
 };
-#endif /* CONFIG_SPI_COLDFIRE_QSPI */
+#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
 
 static struct platform_device *mcf_devices[] __initdata = {
 	&mcf_uart,
@@ -284,7 +284,7 @@ static struct platform_device *mcf_devices[] __initdata = {
 	&mcf_fec1,
 #endif
 #endif
-#ifdef CONFIG_SPI_COLDFIRE_QSPI
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
 	&mcf_qspi,
 #endif
 };