clk: sunxi-ng: enable so-said LDOs for A64 SoC's pll-mipi clock

In the user manual of A64 SoC, the bit 22 and 23 of pll-mipi control
register is called "LDO{1,2}_EN", and according to the BSP source code
from Allwinner , the LDOs are enabled during the clock's enabling
process.

The clock failed to generate output if the two LDOs are not enabled.

Add the two bits to the clock's gate bits, so that the LDOs are enabled
when the PLL is enabled.

Fixes: c6a06374 ("clk: sunxi-ng: Add A64 clocks")
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>

drivers/clk/sunxi-ng/ccu-sun50i-a64.c

@@ -162,7 +162,12 @@ static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_gpu_clk, "pll-gpu",
 #define SUN50I_A64_PLL_MIPI_REG		0x040
 
 static struct ccu_nkm pll_mipi_clk = {
-	.enable		= BIT(31),
+	/*
+	 * The bit 23 and 22 are called "LDO{1,2}_EN" on the SoC's
+	 * user manual, and by experiments the PLL doesn't work without
+	 * these bits toggled.
+	 */
+	.enable		= BIT(31) | BIT(23) | BIT(22),
 	.lock		= BIT(28),
 	.n		= _SUNXI_CCU_MULT(8, 4),
 	.k		= _SUNXI_CCU_MULT_MIN(4, 2, 2),