Commit 85a03fe9 authored by Olof Johansson's avatar Olof Johansson

Merge tag 'reset-for-4.19' of git://git.pengutronix.de/git/pza/linux into next/drivers

Reset controller changes for v4.19

This adds new drivers and bindings for the SDM845 AOSS (always on
subsystem) reset controller and for the Uniphier USB3 core reset.
SPI controller resets are added to the Uniphier reset driver.

* tag 'reset-for-4.19' of git://git.pengutronix.de/git/pza/linux:
  reset: uniphier: add reset control support for SPI
  reset: uniphier: add USB3 core reset control
  dt-bindings: reset: uniphier: add USB3 core reset support
  reset: simple: export reset_simple_ops to be referred from modules
  reset: qcom: AOSS (always on subsystem) reset controller
  dt-bindings: reset: Add AOSS reset bindings for SDM845 SoCs
Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
parents 47262455 6b39fd59
Qualcomm AOSS Reset Controller
======================================
This binding describes a reset-controller found on AOSS-CC (always on subsystem)
for Qualcomm SDM845 SoCs.
Required properties:
- compatible:
Usage: required
Value type: <string>
Definition: must be:
"qcom,sdm845-aoss-cc"
- reg:
Usage: required
Value type: <prop-encoded-array>
Definition: must specify the base address and size of the register
space.
- #reset-cells:
Usage: required
Value type: <uint>
Definition: must be 1; cell entry represents the reset index.
Example:
aoss_reset: reset-controller@c2a0000 {
compatible = "qcom,sdm845-aoss-cc";
reg = <0xc2a0000 0x31000>;
#reset-cells = <1>;
};
Specifying reset lines connected to IP modules
==============================================
Device nodes that need access to reset lines should
specify them as a reset phandle in their corresponding node as
specified in reset.txt.
For list of all valid reset indicies see
<dt-bindings/reset/qcom,sdm845-aoss.h>
Example:
modem-pil@4080000 {
...
resets = <&aoss_reset AOSS_CC_MSS_RESTART>;
reset-names = "mss_restart";
...
};
......@@ -118,3 +118,59 @@ Example:
other nodes ...
};
USB3 core reset
---------------
USB3 core reset belongs to USB3 glue layer. Before using the core reset,
it is necessary to control the clocks and resets to enable this layer.
These clocks and resets should be described in each property.
Required properties:
- compatible: Should be
"socionext,uniphier-pro4-usb3-reset" - for Pro4 SoC
"socionext,uniphier-pxs2-usb3-reset" - for PXs2 SoC
"socionext,uniphier-ld20-usb3-reset" - for LD20 SoC
"socionext,uniphier-pxs3-usb3-reset" - for PXs3 SoC
- #reset-cells: Should be 1.
- reg: Specifies offset and length of the register set for the device.
- clocks: A list of phandles to the clock gate for USB3 glue layer.
According to the clock-names, appropriate clocks are required.
- clock-names: Should contain
"gio", "link" - for Pro4 SoC
"link" - for others
- resets: A list of phandles to the reset control for USB3 glue layer.
According to the reset-names, appropriate resets are required.
- reset-names: Should contain
"gio", "link" - for Pro4 SoC
"link" - for others
Example:
usb-glue@65b00000 {
compatible = "socionext,uniphier-ld20-dwc3-glue",
"simple-mfd";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x65b00000 0x400>;
usb_rst: reset@0 {
compatible = "socionext,uniphier-ld20-usb3-reset";
reg = <0x0 0x4>;
#reset-cells = <1>;
clock-names = "link";
clocks = <&sys_clk 14>;
reset-names = "link";
resets = <&sys_rst 14>;
};
regulator {
...
};
phy {
...
};
...
};
......@@ -82,6 +82,15 @@ config RESET_PISTACHIO
help
This enables the reset driver for ImgTec Pistachio SoCs.
config RESET_QCOM_AOSS
bool "Qcom AOSS Reset Driver"
depends on ARCH_QCOM || COMPILE_TEST
help
This enables the AOSS (always on subsystem) reset driver
for Qualcomm SDM845 SoCs. Say Y if you want to control
reset signals provided by AOSS for Modem, Venus, ADSP,
GPU, Camera, Wireless, Display subsystem. Otherwise, say N.
config RESET_SIMPLE
bool "Simple Reset Controller Driver" if COMPILE_TEST
default ARCH_SOCFPGA || ARCH_STM32 || ARCH_STRATIX10 || ARCH_SUNXI || ARCH_ZX || ARCH_ASPEED
......@@ -138,6 +147,16 @@ config RESET_UNIPHIER
Say Y if you want to control reset signals provided by System Control
block, Media I/O block, Peripheral Block.
config RESET_UNIPHIER_USB3
tristate "USB3 reset driver for UniPhier SoCs"
depends on (ARCH_UNIPHIER || COMPILE_TEST) && OF
default ARCH_UNIPHIER
select RESET_SIMPLE
help
Support for the USB3 core reset on UniPhier SoCs.
Say Y if you want to control reset signals provided by
USB3 glue layer.
config RESET_ZYNQ
bool "ZYNQ Reset Driver" if COMPILE_TEST
default ARCH_ZYNQ
......
......@@ -14,11 +14,13 @@ obj-$(CONFIG_RESET_LPC18XX) += reset-lpc18xx.o
obj-$(CONFIG_RESET_MESON) += reset-meson.o
obj-$(CONFIG_RESET_OXNAS) += reset-oxnas.o
obj-$(CONFIG_RESET_PISTACHIO) += reset-pistachio.o
obj-$(CONFIG_RESET_QCOM_AOSS) += reset-qcom-aoss.o
obj-$(CONFIG_RESET_SIMPLE) += reset-simple.o
obj-$(CONFIG_RESET_STM32MP157) += reset-stm32mp1.o
obj-$(CONFIG_RESET_SUNXI) += reset-sunxi.o
obj-$(CONFIG_RESET_TI_SCI) += reset-ti-sci.o
obj-$(CONFIG_RESET_TI_SYSCON) += reset-ti-syscon.o
obj-$(CONFIG_RESET_UNIPHIER) += reset-uniphier.o
obj-$(CONFIG_RESET_UNIPHIER_USB3) += reset-uniphier-usb3.o
obj-$(CONFIG_RESET_ZYNQ) += reset-zynq.o
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2018 The Linux Foundation. All rights reserved.
*/
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/reset-controller.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/of_device.h>
#include <dt-bindings/reset/qcom,sdm845-aoss.h>
struct qcom_aoss_reset_map {
unsigned int reg;
};
struct qcom_aoss_desc {
const struct qcom_aoss_reset_map *resets;
size_t num_resets;
};
struct qcom_aoss_reset_data {
struct reset_controller_dev rcdev;
void __iomem *base;
const struct qcom_aoss_desc *desc;
};
static const struct qcom_aoss_reset_map sdm845_aoss_resets[] = {
[AOSS_CC_MSS_RESTART] = {0x10000},
[AOSS_CC_CAMSS_RESTART] = {0x11000},
[AOSS_CC_VENUS_RESTART] = {0x12000},
[AOSS_CC_GPU_RESTART] = {0x13000},
[AOSS_CC_DISPSS_RESTART] = {0x14000},
[AOSS_CC_WCSS_RESTART] = {0x20000},
[AOSS_CC_LPASS_RESTART] = {0x30000},
};
static const struct qcom_aoss_desc sdm845_aoss_desc = {
.resets = sdm845_aoss_resets,
.num_resets = ARRAY_SIZE(sdm845_aoss_resets),
};
static inline struct qcom_aoss_reset_data *to_qcom_aoss_reset_data(
struct reset_controller_dev *rcdev)
{
return container_of(rcdev, struct qcom_aoss_reset_data, rcdev);
}
static int qcom_aoss_control_assert(struct reset_controller_dev *rcdev,
unsigned long idx)
{
struct qcom_aoss_reset_data *data = to_qcom_aoss_reset_data(rcdev);
const struct qcom_aoss_reset_map *map = &data->desc->resets[idx];
writel(1, data->base + map->reg);
/* Wait 6 32kHz sleep cycles for reset */
usleep_range(200, 300);
return 0;
}
static int qcom_aoss_control_deassert(struct reset_controller_dev *rcdev,
unsigned long idx)
{
struct qcom_aoss_reset_data *data = to_qcom_aoss_reset_data(rcdev);
const struct qcom_aoss_reset_map *map = &data->desc->resets[idx];
writel(0, data->base + map->reg);
/* Wait 6 32kHz sleep cycles for reset */
usleep_range(200, 300);
return 0;
}
static int qcom_aoss_control_reset(struct reset_controller_dev *rcdev,
unsigned long idx)
{
qcom_aoss_control_assert(rcdev, idx);
return qcom_aoss_control_deassert(rcdev, idx);
}
static const struct reset_control_ops qcom_aoss_reset_ops = {
.reset = qcom_aoss_control_reset,
.assert = qcom_aoss_control_assert,
.deassert = qcom_aoss_control_deassert,
};
static int qcom_aoss_reset_probe(struct platform_device *pdev)
{
struct qcom_aoss_reset_data *data;
struct device *dev = &pdev->dev;
const struct qcom_aoss_desc *desc;
struct resource *res;
desc = of_device_get_match_data(dev);
if (!desc)
return -EINVAL;
data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
data->desc = desc;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
data->base = devm_ioremap_resource(dev, res);
if (IS_ERR(data->base))
return PTR_ERR(data->base);
data->rcdev.owner = THIS_MODULE;
data->rcdev.ops = &qcom_aoss_reset_ops;
data->rcdev.nr_resets = desc->num_resets;
data->rcdev.of_node = dev->of_node;
return devm_reset_controller_register(dev, &data->rcdev);
}
static const struct of_device_id qcom_aoss_reset_of_match[] = {
{ .compatible = "qcom,sdm845-aoss-cc", .data = &sdm845_aoss_desc },
{}
};
static struct platform_driver qcom_aoss_reset_driver = {
.probe = qcom_aoss_reset_probe,
.driver = {
.name = "qcom_aoss_reset",
.of_match_table = qcom_aoss_reset_of_match,
},
};
builtin_platform_driver(qcom_aoss_reset_driver);
MODULE_DESCRIPTION("Qualcomm AOSS Reset Driver");
MODULE_LICENSE("GPL v2");
......@@ -87,6 +87,7 @@ const struct reset_control_ops reset_simple_ops = {
.deassert = reset_simple_deassert,
.status = reset_simple_status,
};
EXPORT_SYMBOL_GPL(reset_simple_ops);
/**
* struct reset_simple_devdata - simple reset controller properties
......
// SPDX-License-Identifier: GPL-2.0
//
// reset-uniphier-usb3.c - USB3 reset driver for UniPhier
// Copyright 2018 Socionext Inc.
// Author: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
#include <linux/clk.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/reset.h>
#include "reset-simple.h"
#define MAX_CLKS 2
#define MAX_RSTS 2
struct uniphier_usb3_reset_soc_data {
int nclks;
const char * const *clock_names;
int nrsts;
const char * const *reset_names;
};
struct uniphier_usb3_reset_priv {
struct clk_bulk_data clk[MAX_CLKS];
struct reset_control *rst[MAX_RSTS];
struct reset_simple_data rdata;
const struct uniphier_usb3_reset_soc_data *data;
};
static int uniphier_usb3_reset_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct uniphier_usb3_reset_priv *priv;
struct resource *res;
resource_size_t size;
const char *name;
int i, ret, nr;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
priv->data = of_device_get_match_data(dev);
if (WARN_ON(!priv->data || priv->data->nclks > MAX_CLKS ||
priv->data->nrsts > MAX_RSTS))
return -EINVAL;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
size = resource_size(res);
priv->rdata.membase = devm_ioremap_resource(dev, res);
if (IS_ERR(priv->rdata.membase))
return PTR_ERR(priv->rdata.membase);
for (i = 0; i < priv->data->nclks; i++)
priv->clk[i].id = priv->data->clock_names[i];
ret = devm_clk_bulk_get(dev, priv->data->nclks, priv->clk);
if (ret)
return ret;
for (i = 0; i < priv->data->nrsts; i++) {
name = priv->data->reset_names[i];
priv->rst[i] = devm_reset_control_get_shared(dev, name);
if (IS_ERR(priv->rst[i]))
return PTR_ERR(priv->rst[i]);
}
ret = clk_bulk_prepare_enable(priv->data->nclks, priv->clk);
if (ret)
return ret;
for (nr = 0; nr < priv->data->nrsts; nr++) {
ret = reset_control_deassert(priv->rst[nr]);
if (ret)
goto out_rst_assert;
}
spin_lock_init(&priv->rdata.lock);
priv->rdata.rcdev.owner = THIS_MODULE;
priv->rdata.rcdev.nr_resets = size * BITS_PER_BYTE;
priv->rdata.rcdev.ops = &reset_simple_ops;
priv->rdata.rcdev.of_node = dev->of_node;
priv->rdata.active_low = true;
platform_set_drvdata(pdev, priv);
ret = devm_reset_controller_register(dev, &priv->rdata.rcdev);
if (ret)
goto out_rst_assert;
return 0;
out_rst_assert:
while (nr--)
reset_control_assert(priv->rst[nr]);
clk_bulk_disable_unprepare(priv->data->nclks, priv->clk);
return ret;
}
static int uniphier_usb3_reset_remove(struct platform_device *pdev)
{
struct uniphier_usb3_reset_priv *priv = platform_get_drvdata(pdev);
int i;
for (i = 0; i < priv->data->nrsts; i++)
reset_control_assert(priv->rst[i]);
clk_bulk_disable_unprepare(priv->data->nclks, priv->clk);
return 0;
}
static const char * const uniphier_pro4_clock_reset_names[] = {
"gio", "link",
};
static const struct uniphier_usb3_reset_soc_data uniphier_pro4_data = {
.nclks = ARRAY_SIZE(uniphier_pro4_clock_reset_names),
.clock_names = uniphier_pro4_clock_reset_names,
.nrsts = ARRAY_SIZE(uniphier_pro4_clock_reset_names),
.reset_names = uniphier_pro4_clock_reset_names,
};
static const char * const uniphier_pxs2_clock_reset_names[] = {
"link",
};
static const struct uniphier_usb3_reset_soc_data uniphier_pxs2_data = {
.nclks = ARRAY_SIZE(uniphier_pxs2_clock_reset_names),
.clock_names = uniphier_pxs2_clock_reset_names,
.nrsts = ARRAY_SIZE(uniphier_pxs2_clock_reset_names),
.reset_names = uniphier_pxs2_clock_reset_names,
};
static const struct of_device_id uniphier_usb3_reset_match[] = {
{
.compatible = "socionext,uniphier-pro4-usb3-reset",
.data = &uniphier_pro4_data,
},
{
.compatible = "socionext,uniphier-pxs2-usb3-reset",
.data = &uniphier_pxs2_data,
},
{
.compatible = "socionext,uniphier-ld20-usb3-reset",
.data = &uniphier_pxs2_data,
},
{
.compatible = "socionext,uniphier-pxs3-usb3-reset",
.data = &uniphier_pxs2_data,
},
{ /* Sentinel */ }
};
MODULE_DEVICE_TABLE(of, uniphier_usb3_reset_match);
static struct platform_driver uniphier_usb3_reset_driver = {
.probe = uniphier_usb3_reset_probe,
.remove = uniphier_usb3_reset_remove,
.driver = {
.name = "uniphier-usb3-reset",
.of_match_table = uniphier_usb3_reset_match,
},
};
module_platform_driver(uniphier_usb3_reset_driver);
MODULE_AUTHOR("Kunihiko Hayashi <hayashi.kunihiko@socionext.com>");
MODULE_DESCRIPTION("UniPhier USB3 Reset Driver");
MODULE_LICENSE("GPL");
......@@ -202,6 +202,12 @@ static const struct uniphier_reset_data uniphier_pro5_sd_reset_data[] = {
#define UNIPHIER_PERI_RESET_FI2C(id, ch) \
UNIPHIER_RESETX((id), 0x114, 24 + (ch))
#define UNIPHIER_PERI_RESET_SCSSI(id) \
UNIPHIER_RESETX((id), 0x110, 17)
#define UNIPHIER_PERI_RESET_MCSSI(id) \
UNIPHIER_RESETX((id), 0x114, 14)
static const struct uniphier_reset_data uniphier_ld4_peri_reset_data[] = {
UNIPHIER_PERI_RESET_UART(0, 0),
UNIPHIER_PERI_RESET_UART(1, 1),
......@@ -212,6 +218,7 @@ static const struct uniphier_reset_data uniphier_ld4_peri_reset_data[] = {
UNIPHIER_PERI_RESET_I2C(6, 2),
UNIPHIER_PERI_RESET_I2C(7, 3),
UNIPHIER_PERI_RESET_I2C(8, 4),
UNIPHIER_PERI_RESET_SCSSI(11),
UNIPHIER_RESET_END,
};
......@@ -227,6 +234,8 @@ static const struct uniphier_reset_data uniphier_pro4_peri_reset_data[] = {
UNIPHIER_PERI_RESET_FI2C(8, 4),
UNIPHIER_PERI_RESET_FI2C(9, 5),
UNIPHIER_PERI_RESET_FI2C(10, 6),
UNIPHIER_PERI_RESET_SCSSI(11),
UNIPHIER_PERI_RESET_MCSSI(12),
UNIPHIER_RESET_END,
};
......
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2018 The Linux Foundation. All rights reserved.
*/
#ifndef _DT_BINDINGS_RESET_AOSS_SDM_845_H
#define _DT_BINDINGS_RESET_AOSS_SDM_845_H
#define AOSS_CC_MSS_RESTART 0
#define AOSS_CC_CAMSS_RESTART 1
#define AOSS_CC_VENUS_RESTART 2
#define AOSS_CC_GPU_RESTART 3
#define AOSS_CC_DISPSS_RESTART 4
#define AOSS_CC_WCSS_RESTART 5
#define AOSS_CC_LPASS_RESTART 6
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment