Skip to content

L
linux
Commit 85a8c520 authored by Maxime Ripard's avatar Maxime Ripard
Browse files
Options

ARM: dts: sun7i: Change pinctrl nodes to avoid warning 

All our pinctrl nodes were using a node name convention with a unit-address
to differentiate the different muxing options. However, since those nodes
didn't have a reg property, they were generating warnings in DTC.

In order to accomodate for this, convert the old nodes to the syntax we've
been using for the new SoCs, including removing the letter suffix of the
node labels to the bank of those pins to make things more readable.
Signed-off-by: default avatarMaxime Ripard <maxime.ripard@bootlin.com>
Acked-by: default avatarChen-Yu Tsai <wens@csie.org>
parent c8fd1584
Hide whitespace changes
Inline Side-by-side
Showing with 236 additions and 236 deletions
arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts
View file @ 85a8c520
......@@ -128,7 +128,7 @@ &ehci1 {
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_pins_rgmii_a>;
pinctrl-0 = <&gmac_rgmii_pins>;
phy = <&phy1>;
phy-mode = "rgmii";
phy-supply = <&reg_gmac_3v3>;
......@@ -151,7 +151,7 @@ hdmi_out_con: endpoint {
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
pinctrl-0 = <&i2c0_pins>;
status = "okay";
axp209: pmic@34 {
......@@ -169,13 +169,13 @@ &ac_power_supply {
&ir0 {
pinctrl-names = "default";
pinctrl-0 = <&ir0_rx_pins_a>;
pinctrl-0 = <&ir0_rx_pin>;
status = "okay";
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>;
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
......@@ -186,7 +186,7 @@ &mmc3 {
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&mmc3_pins_a>;
pinctrl-0 = <&mmc3_pins>;
vmmc-supply = <&reg_vcc3v3>;
mmc-pwrseq = <&mmc3_pwrseq>;
bus-width = <4>;
......@@ -203,7 +203,7 @@ brcmf: wifi@1 {
};
};
&mmc3_pins_a {
&mmc3_pins {
/* AP6210 requires pull-up */
bias-pull-up;
};
......@@ -251,7 +251,7 @@ &reg_usb0_vbus {
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
......
arch/arm/boot/dts/sun7i-a20-bananapi.dts
View file @ 85a8c520
......@@ -130,7 +130,7 @@ &ehci1 {
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_pins_rgmii_a>;
pinctrl-0 = <&gmac_rgmii_pins>;
phy = <&phy1>;
phy-mode = "rgmii";
phy-supply = <&reg_gmac_3v3>;
......@@ -153,7 +153,7 @@ hdmi_out_con: endpoint {
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
pinctrl-0 = <&i2c0_pins>;
status = "okay";
axp209: pmic@34 {
......@@ -165,19 +165,19 @@ axp209: pmic@34 {
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins_a>;
pinctrl-0 = <&i2c2_pins>;
status = "okay";
};
&ir0 {
pinctrl-names = "default";
pinctrl-0 = <&ir0_rx_pins_a>;
pinctrl-0 = <&ir0_rx_pin>;
status = "okay";
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>;
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
......@@ -296,27 +296,27 @@ &reg_usb2_vbus {
&spi0 {
pinctrl-names = "default";
pinctrl-0 = <&spi0_pins_a>,
<&spi0_cs0_pins_a>,
<&spi0_cs1_pins_a>;
pinctrl-0 = <&spi0_pi_pins>,
<&spi0_cs0_pi_pin>,
<&spi0_cs1_pi_pin>;
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&uart3_pins_b>;
pinctrl-0 = <&uart3_ph_pins>;
status = "okay";
};
&uart7 {
pinctrl-names = "default";
pinctrl-0 = <&uart7_pins_a>;
pinctrl-0 = <&uart7_pi_pins>;
status = "okay";
};
......
arch/arm/boot/dts/sun7i-a20-bananapro.dts
View file @ 85a8c520
......@@ -108,7 +108,7 @@ &ehci1 {
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_pins_rgmii_a>;
pinctrl-0 = <&gmac_rgmii_pins>;
phy = <&phy1>;
phy-mode = "rgmii";
phy-supply = <&reg_gmac_3v3>;
......@@ -121,7 +121,7 @@ phy1: ethernet-phy@1 {
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
pinctrl-0 = <&i2c0_pins>;
status = "okay";
axp209: pmic@34 {
......@@ -137,19 +137,19 @@ axp209: pmic@34 {
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins_a>;
pinctrl-0 = <&i2c2_pins>;
status = "okay";
};
&ir0 {
pinctrl-names = "default";
pinctrl-0 = <&ir0_rx_pins_a>;
pinctrl-0 = <&ir0_rx_pin>;
status = "okay";
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>;
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
......@@ -158,7 +158,7 @@ &mmc0 {
&mmc3 {
pinctrl-names = "default";
pinctrl-0 = <&mmc3_pins_a>;
pinctrl-0 = <&mmc3_pins>;
vmmc-supply = <&reg_vcc3v3>;
mmc-pwrseq = <&wifi_pwrseq>;
bus-width = <4>;
......@@ -194,27 +194,27 @@ &reg_usb2_vbus {
&spi0 {
pinctrl-names = "default";
pinctrl-0 = <&spi0_pins_a>,
<&spi0_cs0_pins_a>,
<&spi0_cs1_pins_a>;
pinctrl-0 = <&spi0_pi_pins>,
<&spi0_cs0_pi_pin>,
<&spi0_cs1_pi_pin>;
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
&uart4 {
pinctrl-names = "default";
pinctrl-0 = <&uart4_pins_b>;
pinctrl-0 = <&uart4_ph_pins>;
status = "okay";
};
&uart7 {
pinctrl-names = "default";
pinctrl-0 = <&uart7_pins_a>;
pinctrl-0 = <&uart7_pi_pins>;
status = "okay";
};
......
arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
View file @ 85a8c520
......@@ -114,7 +114,7 @@ &ehci1 {
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_pins_mii_a>;
pinctrl-0 = <&gmac_mii_pins>;
phy = <&phy1>;
phy-mode = "mii";
status = "okay";
......@@ -136,7 +136,7 @@ hdmi_out_con: endpoint {
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
pinctrl-0 = <&i2c0_pins>;
status = "okay";
axp209: pmic@34 {
......@@ -148,19 +148,19 @@ axp209: pmic@34 {
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
pinctrl-0 = <&i2c1_pins>;
status = "okay";
};
&ir0 {
pinctrl-names = "default";
pinctrl-0 = <&ir0_rx_pins_a>;
pinctrl-0 = <&ir0_rx_pin>;
status = "okay";
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>;
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
......@@ -232,7 +232,7 @@ &reg_usb2_vbus {
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
......
arch/arm/boot/dts/sun7i-a20-cubietruck.dts
View file @ 85a8c520
......@@ -147,7 +147,7 @@ &ehci1 {
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_pins_rgmii_a>;
pinctrl-0 = <&gmac_rgmii_pins>;
phy = <&phy1>;
phy-mode = "rgmii";
status = "okay";
......@@ -169,7 +169,7 @@ hdmi_out_con: endpoint {
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
pinctrl-0 = <&i2c0_pins>;
status = "okay";
axp209: pmic@34 {
......@@ -181,25 +181,25 @@ axp209: pmic@34 {
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
pinctrl-0 = <&i2c1_pins>;
status = "okay";
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins_a>;
pinctrl-0 = <&i2c2_pins>;
status = "okay";
};
&ir0 {
pinctrl-names = "default";
pinctrl-0 = <&ir0_rx_pins_a>;
pinctrl-0 = <&ir0_rx_pin>;
status = "okay";
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>;
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
......@@ -208,7 +208,7 @@ &mmc0 {
&mmc3 {
pinctrl-names = "default";
pinctrl-0 = <&mmc3_pins_a>;
pinctrl-0 = <&mmc3_pins>;
vmmc-supply = <&reg_vcc3v3>;
mmc-pwrseq = <&mmc3_pwrseq>;
bus-width = <4>;
......@@ -224,7 +224,7 @@ brcmf: wifi@1 {
};
};
&mmc3_pins_a {
&mmc3_pins {
/* AP6210 requires pull-up */
bias-pull-up;
};
......@@ -243,7 +243,7 @@ &otg_sram {
&pwm {
pinctrl-names = "default";
pinctrl-0 = <&pwm0_pins_a>, <&pwm1_pins_a>;
pinctrl-0 = <&pwm0_pin>, <&pwm1_pin>;
status = "okay";
};
......@@ -302,13 +302,13 @@ &reg_usb2_vbus {
&spdif {
pinctrl-names = "default";
pinctrl-0 = <&spdif_tx_pins_a>;
pinctrl-0 = <&spdif_tx_pin>;
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
......
arch/arm/boot/dts/sun7i-a20-hummingbird.dts
View file @ 85a8c520
......@@ -99,7 +99,7 @@ &ehci1 {
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_pins_rgmii_a>;
pinctrl-0 = <&gmac_rgmii_pins>;
phy = <&phy1>;
phy-mode = "rgmii";
phy-supply = <&reg_gmac_vdd>;
......@@ -117,7 +117,7 @@ phy1: ethernet-phy@1 {
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
pinctrl-0 = <&i2c0_pins>;
status = "okay";
axp209: pmic@34 {
......@@ -132,31 +132,31 @@ axp209: pmic@34 {
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
pinctrl-0 = <&i2c1_pins>;
status = "okay";
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins_a>;
pinctrl-0 = <&i2c2_pins>;
status = "okay";
};
&i2c3 {
pinctrl-names = "default";
pinctrl-0 = <&i2c3_pins_a>;
pinctrl-0 = <&i2c3_pins>;
status = "okay";
};
&ir0 {
pinctrl-names = "default";
pinctrl-0 = <&ir0_rx_pins_a>;
pinctrl-0 = <&ir0_rx_pin>;
status = "okay";
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>;
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_vcc3v0>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
......@@ -165,7 +165,7 @@ &mmc0 {
&mmc3 {
pinctrl-names = "default";
pinctrl-0 = <&mmc3_pins_a>;
pinctrl-0 = <&mmc3_pins>;
vmmc-supply = <&reg_mmc3_vdd>;
bus-width = <4>;
non-removable;
......@@ -182,7 +182,7 @@ &ohci1 {
&pwm {
pinctrl-names = "default";
pinctrl-0 = <&pwm0_pins_a>;
pinctrl-0 = <&pwm0_pin>;
status = "okay";
};
......@@ -202,38 +202,38 @@ &reg_usb2_vbus {
&spi2 {
pinctrl-names = "default";
pinctrl-0 = <&spi2_pins_b>,
<&spi2_cs0_pins_b>;
pinctrl-0 = <&spi2_pb_pins>,
<&spi2_cs0_pb_pin>;
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&uart2_pins_a>;
pinctrl-0 = <&uart2_pi_pins>;
status = "okay";
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&uart3_pins_a>;
pinctrl-0 = <&uart3_pg_pins>;
status = "okay";
};
&uart4 {
pinctrl-names = "default";
pinctrl-0 = <&uart4_pins_a>;
pinctrl-0 = <&uart4_pg_pins>;
status = "okay";
};
&uart5 {
pinctrl-names = "default";
pinctrl-0 = <&uart5_pins_a>;
pinctrl-0 = <&uart5_pi_pins>;
status = "okay";
};
......
arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts
View file @ 85a8c520
......@@ -114,7 +114,7 @@ &ehci1 {
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_pins_mii_a>;
pinctrl-0 = <&gmac_mii_pins>;
phy = <&phy1>;
phy-mode = "mii";
phy-supply = <&reg_gmac_3v3>;
......@@ -127,7 +127,7 @@ phy1: ethernet-phy@1 {
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
pinctrl-0 = <&i2c0_pins>;
status = "okay";
axp209: pmic@34 {
......@@ -143,13 +143,13 @@ axp209: pmic@34 {
&ir0 {
pinctrl-names = "default";
pinctrl-0 = <&ir0_rx_pins_a>;
pinctrl-0 = <&ir0_rx_pin>;
status = "okay";
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>;
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
......@@ -158,7 +158,7 @@ &mmc0 {
&mmc3 {
pinctrl-names = "default";
pinctrl-0 = <&mmc3_pins_a>;
pinctrl-0 = <&mmc3_pins>;
vmmc-supply = <&reg_vmmc3>;
bus-width = <4>;
non-removable;
......@@ -173,7 +173,7 @@ brcmf: wifi@1 {
};
};
&mmc3_pins_a {
&mmc3_pins {
/* AP6210 / AP6330 requires pull-up */
bias-pull-up;
};
......@@ -196,7 +196,7 @@ &reg_usb2_vbus {
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
......
arch/arm/boot/dts/sun7i-a20-icnova-swac.dts
View file @ 85a8c520
......@@ -74,7 +74,7 @@ &ehci1 {
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_pins_mii_a>;
pinctrl-0 = <&gmac_mii_pins>;
phy = <&phy1>;
phy-mode = "mii";
status = "okay";
......@@ -86,7 +86,7 @@ phy1: ethernet-phy@1 {
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
pinctrl-0 = <&i2c0_pins>;
status = "okay";
axp209: pmic@34 {
......@@ -98,13 +98,13 @@ axp209: pmic@34 {
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
pinctrl-0 = <&i2c1_pins>;
status = "okay";
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>;
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 8 5 GPIO_ACTIVE_LOW>; /* PI5 */
......@@ -156,7 +156,7 @@ &reg_usb2_vbus {
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
......
arch/arm/boot/dts/sun7i-a20-itead-ibox.dts
View file @ 85a8c520
......@@ -96,7 +96,7 @@ &codec {
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_pins_mii_a>;
pinctrl-0 = <&gmac_mii_pins>;
phy = <&phy1>;
phy-mode = "mii";
status = "okay";
......@@ -115,13 +115,13 @@ axp209: pmic@34 {
&ir0 {
pinctrl-names = "default";
pinctrl-0 = <&ir0_rx_pins_a>;
pinctrl-0 = <&ir0_rx_pin>;
status = "okay";
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>;
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
......@@ -142,6 +142,6 @@ &reg_ahci_5v {
&spdif {
pinctrl-names = "default";
pinctrl-0 = <&spdif_tx_pins_a>;
pinctrl-0 = <&spdif_tx_pin>;
status = "okay";
};
arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
View file @ 85a8c520
......@@ -119,7 +119,7 @@ &ehci1 {
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_pins_rgmii_a>;
pinctrl-0 = <&gmac_rgmii_pins>;
phy-mode = "rgmii";
phy-supply = <&reg_gmac_3v3>;
status = "okay";
......@@ -196,7 +196,7 @@ hdmi_out_con: endpoint {
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
pinctrl-0 = <&i2c0_pins>;
status = "okay";
axp209: pmic@34 {
......@@ -208,19 +208,19 @@ axp209: pmic@34 {
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins_a>;
pinctrl-0 = <&i2c2_pins>;
status = "okay";
};
&ir0 {
pinctrl-names = "default";
pinctrl-0 = <&ir0_rx_pins_a>;
pinctrl-0 = <&ir0_rx_pin>;
status = "okay";
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>;
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
......@@ -294,27 +294,27 @@ &reg_usb2_vbus {
&spi0 {
pinctrl-names = "default";
pinctrl-0 = <&spi0_pins_a>,
<&spi0_cs0_pins_a>,
<&spi0_cs1_pins_a>;
pinctrl-0 = <&spi0_pi_pins>,
<&spi0_cs0_pi_pin>,
<&spi0_cs1_pi_pin>;
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&uart3_pins_b>;
pinctrl-0 = <&uart3_ph_pins>;
status = "okay";
};
&uart7 {
pinctrl-names = "default";
pinctrl-0 = <&uart7_pins_a>;
pinctrl-0 = <&uart7_pi_pins>;
status = "okay";
};
......
arch/arm/boot/dts/sun7i-a20-m3.dts
View file @ 85a8c520
......@@ -81,7 +81,7 @@ &ehci1 {
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_pins_mii_a>;
pinctrl-0 = <&gmac_mii_pins>;
phy = <&phy1>;
phy-mode = "mii";
status = "okay";
......@@ -93,7 +93,7 @@ phy1: ethernet-phy@1 {
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
pinctrl-0 = <&i2c0_pins>;
status = "okay";
axp209: pmic@34 {
......@@ -109,13 +109,13 @@ axp209: pmic@34 {
&ir0 {
pinctrl-names = "default";
pinctrl-0 = <&ir0_rx_pins_a>;
pinctrl-0 = <&ir0_rx_pin>;
status = "okay";
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>;
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
......@@ -124,7 +124,7 @@ &mmc0 {
&mmc2 {
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins_a>;
pinctrl-0 = <&mmc2_pins>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
non-removable;
......@@ -149,7 +149,7 @@ &reg_usb2_vbus {
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
......
arch/arm/boot/dts/sun7i-a20-mk808c.dts
View file @ 85a8c520
......@@ -107,7 +107,7 @@ hdmi_out_con: endpoint {
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
pinctrl-0 = <&i2c0_pins>;
status = "okay";
axp209: pmic@34 {
......@@ -122,19 +122,19 @@ axp209: pmic@34 {
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
pinctrl-0 = <&i2c1_pins>;
status = "okay";
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins_a>;
pinctrl-0 = <&i2c2_pins>;
status = "okay";
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>;
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_vcc3v0>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
......@@ -167,13 +167,13 @@ &reg_usb2_vbus {
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&uart2_pins_a>;
pinctrl-0 = <&uart2_pi_pins>;
status = "okay";
};
......
arch/arm/boot/dts/sun7i-a20-olimex-som-evb-emmc.dts
View file @ 85a8c520
......@@ -22,7 +22,7 @@ mmc2_pwrseq: mmc2_pwrseq {
&mmc2 {
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins_a>;
pinctrl-0 = <&mmc2_pins>;
vmmc-supply = <&reg_vcc3v3>;
mmc-pwrseq = <&mmc2_pwrseq>;
bus-width = <4>;
......
arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts
View file @ 85a8c520
......@@ -110,7 +110,7 @@ &codec {
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_pins_rgmii_a>;
pinctrl-0 = <&gmac_rgmii_pins>;
phy = <&phy1>;
phy-mode = "rgmii";
status = "okay";
......@@ -132,7 +132,7 @@ hdmi_out_con: endpoint {
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
pinctrl-0 = <&i2c0_pins>;
status = "okay";
axp209: pmic@34 {
......@@ -144,13 +144,13 @@ axp209: pmic@34 {
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
pinctrl-0 = <&i2c1_pins>;
status = "okay";
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins_a>;
pinctrl-0 = <&i2c2_pins>;
status = "okay";
};
......@@ -210,7 +210,7 @@ button-1400 {
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>;
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
......@@ -219,7 +219,7 @@ &mmc0 {
&mmc3 {
pinctrl-names = "default";
pinctrl-0 = <&mmc3_pins_a>;
pinctrl-0 = <&mmc3_pins>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 0 GPIO_ACTIVE_LOW>; /* PH0 */
......@@ -292,33 +292,33 @@ &reg_usb2_vbus {
&spi1 {
pinctrl-names = "default";
pinctrl-0 = <&spi1_pins_a>,
<&spi1_cs0_pins_a>;
pinctrl-0 = <&spi1_pi_pins>,
<&spi1_cs0_pi_pin>;
status = "okay";
};
&spi2 {
pinctrl-names = "default";
pinctrl-0 = <&spi2_pins_a>,
<&spi2_cs0_pins_a>;
pinctrl-0 = <&spi2_pc_pins>,
<&spi2_cs0_pc_pin>;
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
&uart6 {
pinctrl-names = "default";
pinctrl-0 = <&uart6_pins_a>;
pinctrl-0 = <&uart6_pi_pins>;
status = "okay";
};
&uart7 {
pinctrl-names = "default";
pinctrl-0 = <&uart7_pins_a>;
pinctrl-0 = <&uart7_pi_pins>;
status = "okay";
};
......
arch/arm/boot/dts/sun7i-a20-olimex-som204-evb-emmc.dts
View file @ 85a8c520
......@@ -21,7 +21,7 @@ mmc2_pwrseq: mmc2_pwrseq {
&mmc2 {
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins_a>;
pinctrl-0 = <&mmc2_pins>;
vmmc-supply = <&reg_vcc3v3>;
mmc-pwrseq = <&mmc2_pwrseq>;
bus-width = <4>;
......
arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts
View file @ 85a8c520
......@@ -78,7 +78,7 @@ &ahci {
&can0 {
pinctrl-names = "default";
pinctrl-0 = <&can0_pins_a>;
pinctrl-0 = <&can_ph_pins>;
status = "okay";
};
......@@ -104,7 +104,7 @@ &ehci1 {
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_pins_rgmii_a>;
pinctrl-0 = <&gmac_rgmii_pins>;
phy = <&phy3>;
phy-mode = "rgmii";
phy-supply = <&reg_vcc3v3>;
......@@ -131,7 +131,7 @@ hdmi_out_con: endpoint {
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
pinctrl-0 = <&i2c0_pins>;
status = "okay";
axp209: pmic@34 {
......@@ -144,7 +144,7 @@ axp209: pmic@34 {
/* Exposed to UEXT1 */
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
pinctrl-0 = <&i2c1_pins>;
status = "okay";
eeprom: eeprom@50 {
......@@ -157,19 +157,19 @@ eeprom: eeprom@50 {
/* Exposed to UEXT2 */
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins_a>;
pinctrl-0 = <&i2c2_pins>;
status = "okay";
};
&ir0 {
pinctrl-names = "default";
pinctrl-0 = <&ir0_rx_pins_a>;
pinctrl-0 = <&ir0_rx_pin>;
status = "okay";
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>;
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>;
......@@ -178,7 +178,7 @@ &mmc0 {
&mmc3 {
pinctrl-names = "default";
pinctrl-0 = <&mmc3_pins_a>;
pinctrl-0 = <&mmc3_pins>;
vmmc-supply = <&reg_vcc3v3>;
mmc-pwrseq = <&rtl_pwrseq>;
bus-width = <4>;
......@@ -274,22 +274,22 @@ &reg_usb2_vbus {
/* Exposed to UEXT1 */
&spi1 {
pinctrl-names = "default";
pinctrl-0 = <&spi1_pins_a>,
<&spi1_cs0_pins_a>;
pinctrl-0 = <&spi1_pi_pins>,
<&spi1_cs0_pi_pin>;
status = "okay";
};
/* Exposed to UEXT2 */
&spi2 {
pinctrl-names = "default";
pinctrl-0 = <&spi2_pins_a>,
<&spi2_cs0_pins_a>;
pinctrl-0 = <&spi2_pc_pins>,
<&spi2_cs0_pc_pin>;
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
......@@ -303,14 +303,14 @@ &uart3 {
/* Exposed to UEXT1 */
&uart4 {
pinctrl-names = "default";
pinctrl-0 = <&uart4_pins_a>;
pinctrl-0 = <&uart4_pg_pins>;
status = "okay";
};
/* Exposed to UEXT2 */
&uart7 {
pinctrl-names = "default";
pinctrl-0 = <&uart7_pins_a>;
pinctrl-0 = <&uart7_pi_pins>;
status = "okay";
};
......
arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts
View file @ 85a8c520
......@@ -105,7 +105,7 @@ &ehci1 {
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_pins_mii_a>;
pinctrl-0 = <&gmac_mii_pins>;
phy = <&phy1>;
phy-mode = "mii";
status = "okay";
......@@ -127,7 +127,7 @@ hdmi_out_con: endpoint {
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
pinctrl-0 = <&i2c0_pins>;
status = "okay";
axp209: pmic@34 {
......@@ -143,7 +143,7 @@ axp209: pmic@34 {
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
pinctrl-0 = <&i2c1_pins>;
status = "okay";
eeprom: eeprom@50 {
......@@ -155,7 +155,7 @@ eeprom: eeprom@50 {
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>;
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
......@@ -213,7 +213,7 @@ &reg_usb2_vbus {
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
......
arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts
View file @ 85a8c520
......@@ -55,7 +55,7 @@ mmc2_pwrseq: pwrseq {
&mmc2 {
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins_a>;
pinctrl-0 = <&mmc2_pins>;
vmmc-supply = <&reg_vcc3v3>;
vqmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
......
arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
View file @ 85a8c520
......@@ -110,7 +110,7 @@ &ehci1 {
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_pins_rgmii_a>;
pinctrl-0 = <&gmac_rgmii_pins>;
phy = <&phy1>;
phy-mode = "rgmii";
status = "okay";
......@@ -132,7 +132,7 @@ hdmi_out_con: endpoint {
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
pinctrl-0 = <&i2c0_pins>;
status = "okay";
axp209: pmic@34 {
......@@ -144,7 +144,7 @@ axp209: pmic@34 {
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
pinctrl-0 = <&i2c1_pins>;
status = "okay";
eeprom: eeprom@50 {
......@@ -160,7 +160,7 @@ &lradc {
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>;
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
......@@ -261,7 +261,7 @@ &reg_usb2_vbus {
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
......
arch/arm/boot/dts/sun7i-a20-olinuxino-micro-emmc.dts
View file @ 85a8c520
......@@ -55,7 +55,7 @@ mmc2_pwrseq: pwrseq {
&mmc2 {
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins_a>;
pinctrl-0 = <&mmc2_pins>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
non-removable;
......
arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
View file @ 85a8c520
......@@ -117,7 +117,7 @@ &ehci1 {
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_pins_mii_a>, <&gmac_txerr>;
pinctrl-0 = <&gmac_mii_pins>, <&gmac_txerr>;
phy = <&phy1>;
phy-mode = "mii";
status = "okay";
......@@ -139,7 +139,7 @@ hdmi_out_con: endpoint {
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
pinctrl-0 = <&i2c0_pins>;
status = "okay";
axp209: pmic@34 {
......@@ -151,7 +151,7 @@ axp209: pmic@34 {
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
pinctrl-0 = <&i2c1_pins>;
status = "okay";
eeprom: eeprom@50 {
......@@ -163,7 +163,7 @@ eeprom: eeprom@50 {
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins_a>;
pinctrl-0 = <&i2c2_pins>;
status = "okay";
};
......@@ -223,7 +223,7 @@ button-1398 {
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>;
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
......@@ -232,7 +232,7 @@ &mmc0 {
&mmc3 {
pinctrl-names = "default";
pinctrl-0 = <&mmc3_pins_a>;
pinctrl-0 = <&mmc3_pins>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 11 GPIO_ACTIVE_LOW>; /* PH11 */
......@@ -325,33 +325,33 @@ &reg_usb2_vbus {
&spi1 {
pinctrl-names = "default";
pinctrl-0 = <&spi1_pins_a>,
<&spi1_cs0_pins_a>;
pinctrl-0 = <&spi1_pi_pins>,
<&spi1_cs0_pi_pin>;
status = "okay";
};
&spi2 {
pinctrl-names = "default";
pinctrl-0 = <&spi2_pins_a>,
<&spi2_cs0_pins_a>;
pinctrl-0 = <&spi2_pc_pins>,
<&spi2_cs0_pc_pin>;
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
&uart6 {
pinctrl-names = "default";
pinctrl-0 = <&uart6_pins_a>;
pinctrl-0 = <&uart6_pi_pins>;
status = "okay";
};
&uart7 {
pinctrl-names = "default";
pinctrl-0 = <&uart7_pins_a>;
pinctrl-0 = <&uart7_pi_pins>;
status = "okay";
};
......
arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts
View file @ 85a8c520
......@@ -119,7 +119,7 @@ &ehci1 {
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_pins_rgmii_a>;
pinctrl-0 = <&gmac_rgmii_pins>;
phy = <&phy1>;
phy-mode = "rgmii";
phy-supply = <&reg_gmac_3v3>;
......@@ -142,7 +142,7 @@ hdmi_out_con: endpoint {
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
pinctrl-0 = <&i2c0_pins>;
status = "okay";
axp209: pmic@34 {
......@@ -156,13 +156,13 @@ axp209: pmic@34 {
&ir0 {
pinctrl-names = "default";
pinctrl-0 = <&ir0_rx_pins_a>;
pinctrl-0 = <&ir0_rx_pin>;
status = "okay";
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>;
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
......@@ -171,7 +171,7 @@ &mmc0 {
&mmc3 {
pinctrl-names = "default";
pinctrl-0 = <&mmc3_pins_a>;
pinctrl-0 = <&mmc3_pins>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 11 GPIO_ACTIVE_LOW>; /* PH11 */
......@@ -231,7 +231,7 @@ &reg_usb2_vbus {
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
......
arch/arm/boot/dts/sun7i-a20-orangepi.dts
View file @ 85a8c520
......@@ -95,7 +95,7 @@ &ehci1 {
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_pins_rgmii_a>;
pinctrl-0 = <&gmac_rgmii_pins>;
phy = <&phy1>;
phy-mode = "rgmii";
phy-supply = <&reg_gmac_3v3>;
......@@ -108,7 +108,7 @@ phy1: ethernet-phy@1 {
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
pinctrl-0 = <&i2c0_pins>;
status = "okay";
axp209: pmic@34 {
......@@ -122,13 +122,13 @@ axp209: pmic@34 {
&ir0 {
pinctrl-names = "default";
pinctrl-0 = <&ir0_rx_pins_a>;
pinctrl-0 = <&ir0_rx_pin>;
status = "okay";
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>;
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
......@@ -188,7 +188,7 @@ &reg_usb2_vbus {
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
......
arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts
View file @ 85a8c520
......@@ -113,7 +113,7 @@ &ehci1 {
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_pins_rgmii_a>;
pinctrl-0 = <&gmac_rgmii_pins>;
phy = <&phy1>;
phy-mode = "rgmii";
status = "okay";
......@@ -135,7 +135,7 @@ hdmi_out_con: endpoint {
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
pinctrl-0 = <&i2c0_pins>;
status = "okay";
axp209: pmic@34 {
......@@ -147,13 +147,13 @@ axp209: pmic@34 {
&ir0 {
pinctrl-names = "default";
pinctrl-0 = <&ir0_rx_pins_a>;
pinctrl-0 = <&ir0_rx_pin>;
status = "okay";
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>;
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
......@@ -220,7 +220,7 @@ &reg_usb1_vbus {
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
......
arch/arm/boot/dts/sun7i-a20-pcduino3.dts
View file @ 85a8c520
......@@ -121,7 +121,7 @@ &ehci1 {
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_pins_mii_a>;
pinctrl-0 = <&gmac_mii_pins>;
phy = <&phy1>;
phy-mode = "mii";
status = "okay";
......@@ -133,7 +133,7 @@ phy1: ethernet-phy@1 {
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
pinctrl-0 = <&i2c0_pins>;
status = "okay";
axp209: pmic@34 {
......@@ -147,13 +147,13 @@ axp209: pmic@34 {
&ir0 {
pinctrl-names = "default";
pinctrl-0 = <&ir0_rx_pins_a>;
pinctrl-0 = <&ir0_rx_pin>;
status = "okay";
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>;
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
......@@ -220,7 +220,7 @@ &reg_usb2_vbus {
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
......
arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts
View file @ 85a8c520
......@@ -90,7 +90,7 @@ &ehci1 {
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
pinctrl-0 = <&i2c0_pins>;
status = "okay";
axp209: pmic@34 {
......@@ -104,13 +104,13 @@ axp209: pmic@34 {
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
pinctrl-0 = <&i2c1_pins>;
status = "okay";
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins_a>;
pinctrl-0 = <&i2c2_pins>;
status = "okay";
gt911: touchscreen@5d {
......@@ -145,7 +145,7 @@ button-761 {
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>;
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
......@@ -174,7 +174,7 @@ usb0_id_detect_pin: usb0_id_detect_pin@0 {
&pwm {
pinctrl-names = "default";
pinctrl-0 = <&pwm0_pins_a>;
pinctrl-0 = <&pwm0_pin>;
status = "okay";
};
......@@ -217,7 +217,7 @@ &reg_usb2_vbus {
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
......
arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts
View file @ 85a8c520
......@@ -80,7 +80,7 @@ &ehci1 {
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_pins_rgmii_a>;
pinctrl-0 = <&gmac_rgmii_pins>;
phy = <&phy1>;
phy-mode = "rgmii";
status = "okay";
......@@ -92,7 +92,7 @@ phy1: ethernet-phy@1 {
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
pinctrl-0 = <&i2c0_pins>;
status = "okay";
axp209: pmic@34 {
......@@ -104,13 +104,13 @@ axp209: pmic@34 {
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
pinctrl-0 = <&i2c1_pins>;
status = "okay";
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins_a>;
pinctrl-0 = <&i2c2_pins>;
status = "okay";
};
......@@ -118,7 +118,7 @@ &i2c2 {
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>;
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
......@@ -127,7 +127,7 @@ &mmc0 {
&mmc3 {
pinctrl-names = "default";
pinctrl-0 = <&mmc3_pins_a>;
pinctrl-0 = <&mmc3_pins>;
vmmc-supply = <&reg_vcc3v3>;
mmc-pwrseq = <&mmc3_pwrseq>;
bus-width = <4>;
......@@ -202,7 +202,7 @@ &reg_usb2_vbus {
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
......
arch/arm/boot/dts/sun7i-a20.dtsi
View file @ 85a8c520
......@@ -747,22 +747,22 @@ pio: pinctrl@1c20800 {
#interrupt-cells = <3>;
#gpio-cells = <3>;
can0_pins_a: can0@0 {
can_ph_pins: can-ph-pins {
pins = "PH20", "PH21";
function = "can";
};
clk_out_a_pins_a: clk_out_a@0 {
clk_out_a_pin: clk-out-a-pin {
pins = "PI12";
function = "clk_out_a";
};
clk_out_b_pins_a: clk_out_b@0 {
clk_out_b_pin: clk-out-b-pin {
pins = "PI13";
function = "clk_out_b";
};
emac_pins_a: emac0@0 {
emac_pa_pins: emac-pa-pins {
pins = "PA0", "PA1", "PA2",
"PA3", "PA4", "PA5", "PA6",
"PA7", "PA8", "PA9", "PA10",
......@@ -771,7 +771,7 @@ emac_pins_a: emac0@0 {
function = "emac";
};
gmac_pins_mii_a: gmac_mii@0 {
gmac_mii_pins: gmac-mii-pins {
pins = "PA0", "PA1", "PA2",
"PA3", "PA4", "PA5", "PA6",
"PA7", "PA8", "PA9", "PA10",
......@@ -780,7 +780,7 @@ gmac_pins_mii_a: gmac_mii@0 {
function = "gmac";
};
gmac_pins_rgmii_a: gmac_rgmii@0 {
gmac_rgmii_pins: gmac-rgmii-pins {
pins = "PA0", "PA1", "PA2",
"PA3", "PA4", "PA5", "PA6",
"PA7", "PA8", "PA10",
......@@ -794,47 +794,47 @@ gmac_pins_rgmii_a: gmac_rgmii@0 {
drive-strength = <40>;
};
i2c0_pins_a: i2c0@0 {
i2c0_pins: i2c0-pins {
pins = "PB0", "PB1";
function = "i2c0";
};
i2c1_pins_a: i2c1@0 {
i2c1_pins: i2c1-pins {
pins = "PB18", "PB19";
function = "i2c1";
};
i2c2_pins_a: i2c2@0 {
i2c2_pins: i2c2-pins {
pins = "PB20", "PB21";
function = "i2c2";
};
i2c3_pins_a: i2c3@0 {
i2c3_pins: i2c3-pins {
pins = "PI0", "PI1";
function = "i2c3";
};
ir0_rx_pins_a: ir0@0 {
ir0_rx_pin: ir0-rx-pin {
pins = "PB4";
function = "ir0";
};
ir0_tx_pins_a: ir0@1 {
ir0_tx_pin: ir0-tx-pin {
pins = "PB3";
function = "ir0";
};
ir1_rx_pins_a: ir1@0 {
ir1_rx_pin: ir1-rx-pin {
pins = "PB23";
function = "ir1";
};
ir1_tx_pins_a: ir1@1 {
ir1_tx_pin: ir1-tx-pin {
pins = "PB22";
function = "ir1";
};
mmc0_pins_a: mmc0@0 {
mmc0_pins: mmc0-pins {
pins = "PF0", "PF1", "PF2",
"PF3", "PF4", "PF5";
function = "mmc0";
......@@ -842,7 +842,7 @@ mmc0_pins_a: mmc0@0 {
bias-pull-up;
};
mmc2_pins_a: mmc2@0 {
mmc2_pins: mmc2-pins {
pins = "PC6", "PC7", "PC8",
"PC9", "PC10", "PC11";
function = "mmc2";
......@@ -850,7 +850,7 @@ mmc2_pins_a: mmc2@0 {
bias-pull-up;
};
mmc3_pins_a: mmc3@0 {
mmc3_pins: mmc3-pins {
pins = "PI4", "PI5", "PI6",
"PI7", "PI8", "PI9";
function = "mmc3";
......@@ -858,118 +858,118 @@ mmc3_pins_a: mmc3@0 {
bias-pull-up;
};
ps20_pins_a: ps20@0 {
ps2_0_pins: ps2-0-pins {
pins = "PI20", "PI21";
function = "ps2";
};
ps21_pins_a: ps21@0 {
ps2_1_ph_pins: ps2-1-ph-pins {
pins = "PH12", "PH13";
function = "ps2";
};
pwm0_pins_a: pwm0@0 {
pwm0_pin: pwm0-pin {
pins = "PB2";
function = "pwm";
};
pwm1_pins_a: pwm1@0 {
pwm1_pin: pwm1-pin {
pins = "PI3";
function = "pwm";
};
spdif_tx_pins_a: spdif@0 {
spdif_tx_pin: spdif-tx-pin {
pins = "PB13";
function = "spdif";
bias-pull-up;
};
spi0_pins_a: spi0@0 {
spi0_pi_pins: spi0-pi-pins {
pins = "PI11", "PI12", "PI13";
function = "spi0";
};
spi0_cs0_pins_a: spi0_cs0@0 {
spi0_cs0_pi_pin: spi0-cs0-pi-pin {
pins = "PI10";
function = "spi0";
};
spi0_cs1_pins_a: spi0_cs1@0 {
spi0_cs1_pi_pin: spi0-cs1-pi-pin {
pins = "PI14";
function = "spi0";
};
spi1_pins_a: spi1@0 {
spi1_pi_pins: spi1-pi-pins {
pins = "PI17", "PI18", "PI19";
function = "spi1";
};
spi1_cs0_pins_a: spi1_cs0@0 {
spi1_cs0_pi_pin: spi1-cs0-pi-pin {
pins = "PI16";
function = "spi1";
};
spi2_pins_a: spi2@0 {
pins = "PC20", "PC21", "PC22";
spi2_pb_pins: spi2-pb-pins {
pins = "PB15", "PB16", "PB17";
function = "spi2";
};
spi2_pins_b: spi2@1 {
pins = "PB15", "PB16", "PB17";
spi2_cs0_pb_pin: spi2-cs0-pb-pin {
pins = "PB14";
function = "spi2";
};
spi2_cs0_pins_a: spi2_cs0@0 {
pins = "PC19";
spi2_pc_pins: spi2-pc-pins {
pins = "PC20", "PC21", "PC22";
function = "spi2";
};
spi2_cs0_pins_b: spi2_cs0@1 {
pins = "PB14";
spi2_cs0_pc_pin: spi2-cs0-pc-pin {
pins = "PC19";
function = "spi2";
};
uart0_pins_a: uart0@0 {
uart0_pb_pins: uart0-pb-pins {
pins = "PB22", "PB23";
function = "uart0";
};
uart2_pins_a: uart2@0 {
uart2_pi_pins: uart2-pi-pins {
pins = "PI16", "PI17", "PI18", "PI19";
function = "uart2";
};
uart3_pins_a: uart3@0 {
uart3_pg_pins: uart3-pg-pins {
pins = "PG6", "PG7", "PG8", "PG9";
function = "uart3";
};
uart3_pins_b: uart3@1 {
uart3_ph_pins: uart3-ph-pins {
pins = "PH0", "PH1";
function = "uart3";
};
uart4_pins_a: uart4@0 {
uart4_pg_pins: uart4-pg-pins {
pins = "PG10", "PG11";
function = "uart4";
};
uart4_pins_b: uart4@1 {
uart4_ph_pins: uart4-ph-pins {
pins = "PH4", "PH5";
function = "uart4";
};
uart5_pins_a: uart5@0 {
uart5_pi_pins: uart5-pi-pins {
pins = "PI10", "PI11";
function = "uart5";
};
uart6_pins_a: uart6@0 {
uart6_pi_pins: uart6-pi-pins {
pins = "PI12", "PI13";
function = "uart6";
};
uart7_pins_a: uart7@0 {
uart7_pi_pins: uart7-pi-pins {
pins = "PI20", "PI21";
function = "uart7";
};
......
arch/arm/boot/dts/sunxi-itead-core-common.dtsi
View file @ 85a8c520
......@@ -121,7 +121,7 @@ &reg_usb2_vbus {
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7