omap3: introduce omap3_map_io

Most OMAP3-based boards use exactly the same code for .map_io method in
the machine_desc structure.
This patch introduces omap3_map_io and updates board-* files to use it
as .map_io method.
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>

arch/arm/mach-omap2/board-3430sdp.c

@@ -803,18 +803,12 @@ static void __init omap_3430sdp_init(void)
 	usb_ehci_init(&ehci_pdata);
 }
 
-static void __init omap_3430sdp_map_io(void)
-{
-	omap2_set_globals_3xxx();
-	omap34xx_map_common_io();
-}
-
 MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board")
 	/* Maintainer: Syed Khasim - Texas Instruments Inc */
 	.phys_io	= 0x48000000,
 	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
-	.map_io		= omap_3430sdp_map_io,
+	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
 	.init_irq	= omap_3430sdp_init_irq,
 	.init_machine	= omap_3430sdp_init,

arch/arm/mach-omap2/board-3630sdp.c

@@ -66,12 +66,6 @@ static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
 	.reset_gpio_port[2]  = -EINVAL
 };
 
-static void __init omap_sdp_map_io(void)
-{
-	omap2_set_globals_3xxx();
-	omap34xx_map_common_io();
-}
-
 static struct omap_board_config_kernel sdp_config[] __initdata = {
 };
 
@@ -107,7 +101,7 @@ MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board")
 	.phys_io	= 0x48000000,
 	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
-	.map_io		= omap_sdp_map_io,
+	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
 	.init_irq	= omap_sdp_init_irq,
 	.init_machine	= omap_sdp_init,

arch/arm/mach-omap2/board-am3517evm.c

@@ -461,17 +461,11 @@ static void __init am3517_evm_init(void)
 	am3517_evm_ethernet_init(&am3517_evm_emac_pdata);
 }
 
-static void __init am3517_evm_map_io(void)
-{
-	omap2_set_globals_3xxx();
-	omap34xx_map_common_io();
-}
-
 MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM")
 	.phys_io	= 0x48000000,
 	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
-	.map_io		= am3517_evm_map_io,
+	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
 	.init_irq	= am3517_evm_init_irq,
 	.init_machine	= am3517_evm_init,

arch/arm/mach-omap2/board-cm-t35.c

@@ -708,12 +708,6 @@ static void __init cm_t35_init_irq(void)
 	omap_gpio_init();
 }
 
-static void __init cm_t35_map_io(void)
-{
-	omap2_set_globals_3xxx();
-	omap34xx_map_common_io();
-}
-
 static struct omap_board_mux board_mux[] __initdata = {
 	/* nCS and IRQ for CM-T35 ethernet */
 	OMAP3_MUX(GPMC_NCS5, OMAP_MUX_MODE0),
@@ -836,7 +830,7 @@ MACHINE_START(CM_T35, "Compulab CM-T35")
 	.phys_io	= 0x48000000,
 	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
-	.map_io		= cm_t35_map_io,
+	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
 	.init_irq	= cm_t35_init_irq,
 	.init_machine	= cm_t35_init,

arch/arm/mach-omap2/board-devkit8000.c

@@ -814,17 +814,11 @@ static void __init devkit8000_init(void)
 	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
 }
 
-static void __init devkit8000_map_io(void)
-{
-	omap2_set_globals_3xxx();
-	omap34xx_map_common_io();
-}
-
 MACHINE_START(DEVKIT8000, "OMAP3 Devkit8000")
 	.phys_io	= 0x48000000,
 	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
-	.map_io		= devkit8000_map_io,
+	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
 	.init_irq	= devkit8000_init_irq,
 	.init_machine	= devkit8000_init,

arch/arm/mach-omap2/board-igep0020.c

@@ -532,17 +532,11 @@ static void __init igep2_init(void)
 		pr_warning("IGEP v2: Could not obtain gpio GPIO_WIFI_NRESET\n");
 }
 
-static void __init igep2_map_io(void)
-{
-	omap2_set_globals_3xxx();
-	omap34xx_map_common_io();
-}
-
 MACHINE_START(IGEP0020, "IGEP v2 board")
 	.phys_io	= 0x48000000,
 	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
-	.map_io		= igep2_map_io,
+	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
 	.init_irq	= igep2_init_irq,
 	.init_machine	= igep2_init,

arch/arm/mach-omap2/board-ldp.c

@@ -406,17 +406,11 @@ static void __init omap_ldp_init(void)
 	ldp_vmmc1_supply.dev = mmc[0].dev;
 }
 
-static void __init omap_ldp_map_io(void)
-{
-	omap2_set_globals_3xxx();
-	omap34xx_map_common_io();
-}
-
 MACHINE_START(OMAP_LDP, "OMAP LDP board")
 	.phys_io	= 0x48000000,
 	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
-	.map_io		= omap_ldp_map_io,
+	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
 	.init_irq	= omap_ldp_init_irq,
 	.init_machine	= omap_ldp_init,

arch/arm/mach-omap2/board-omap3beagle.c

@@ -507,18 +507,12 @@ static void __init omap3_beagle_init(void)
 	beagle_display_init();
 }
 
-static void __init omap3_beagle_map_io(void)
-{
-	omap2_set_globals_3xxx();
-	omap34xx_map_common_io();
-}
-
 MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")
 	/* Maintainer: Syed Mohammed Khasim - http://beagleboard.org */
 	.phys_io	= 0x48000000,
 	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
-	.map_io		= omap3_beagle_map_io,
+	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
 	.init_irq	= omap3_beagle_init_irq,
 	.init_machine	= omap3_beagle_init,

arch/arm/mach-omap2/board-omap3evm.c

@@ -715,18 +715,12 @@ static void __init omap3_evm_init(void)
 	omap3_evm_display_init();
 }
 
-static void __init omap3_evm_map_io(void)
-{
-	omap2_set_globals_3xxx();
-	omap34xx_map_common_io();
-}
-
 MACHINE_START(OMAP3EVM, "OMAP3 EVM")
 	/* Maintainer: Syed Mohammed Khasim - Texas Instruments */
 	.phys_io	= 0x48000000,
 	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
-	.map_io		= omap3_evm_map_io,
+	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
 	.init_irq	= omap3_evm_init_irq,
 	.init_machine	= omap3_evm_init,

arch/arm/mach-omap2/board-omap3pandora.c

@@ -590,17 +590,11 @@ static void __init omap3pandora_init(void)
 	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
 }
 
-static void __init omap3pandora_map_io(void)
-{
-	omap2_set_globals_3xxx();
-	omap34xx_map_common_io();
-}
-
 MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console")
 	.phys_io	= 0x48000000,
 	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
-	.map_io		= omap3pandora_map_io,
+	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
 	.init_irq	= omap3pandora_init_irq,
 	.init_machine	= omap3pandora_init,

arch/arm/mach-omap2/board-omap3stalker.c

@@ -652,18 +652,12 @@ static void __init omap3_stalker_init(void)
 	omap_mux_init_signal("sdr_cke1", OMAP_PIN_OUTPUT);
 }
 
-static void __init omap3_stalker_map_io(void)
-{
-	omap2_set_globals_3xxx();
-	omap34xx_map_common_io();
-}
-
 MACHINE_START(SBC3530, "OMAP3 STALKER")
 	/* Maintainer: Jason Lam -lzg@ema-tech.com */
 	.phys_io		= 0x48000000,
 	.io_pg_offst		= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params		= 0x80000100,
-	.map_io			= omap3_stalker_map_io,
+	.map_io			= omap3_map_io,
 	.init_irq		= omap3_stalker_init_irq,
 	.init_machine		= omap3_stalker_init,
 	.timer			= &omap_timer,

arch/arm/mach-omap2/board-omap3touchbook.c

@@ -559,18 +559,12 @@ static void __init omap3_touchbook_init(void)
 	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
 }
 
-static void __init omap3_touchbook_map_io(void)
-{
-	omap2_set_globals_3xxx();
-	omap34xx_map_common_io();
-}
-
 MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board")
 	/* Maintainer: Gregoire Gentil - http://www.alwaysinnovating.com */
 	.phys_io	= 0x48000000,
 	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
-	.map_io		= omap3_touchbook_map_io,
+	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
 	.init_irq	= omap3_touchbook_init_irq,
 	.init_machine	= omap3_touchbook_init,

arch/arm/mach-omap2/board-overo.c

@@ -484,17 +484,11 @@ static void __init overo_init(void)
 					"OVERO_GPIO_USBH_CPEN\n");
 }
 
-static void __init overo_map_io(void)
-{
-	omap2_set_globals_3xxx();
-	omap34xx_map_common_io();
-}
-
 MACHINE_START(OVERO, "Gumstix Overo")
 	.phys_io	= 0x48000000,
 	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
-	.map_io		= overo_map_io,
+	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
 	.init_irq	= overo_init_irq,
 	.init_machine	= overo_init,

arch/arm/mach-omap2/board-zoom2.c

@@ -84,17 +84,11 @@ static void __init omap_zoom2_init(void)
 	zoom_debugboard_init();
 }
 
-static void __init omap_zoom2_map_io(void)
-{
-	omap2_set_globals_3xxx();
-	omap34xx_map_common_io();
-}
-
 MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board")
 	.phys_io	= ZOOM_UART_BASE,
 	.io_pg_offst	= (ZOOM_UART_VIRT >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
-	.map_io		= omap_zoom2_map_io,
+	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
 	.init_irq	= omap_zoom2_init_irq,
 	.init_machine	= omap_zoom2_init,

arch/arm/mach-omap2/board-zoom3.c

@@ -25,12 +25,6 @@
 #include "mux.h"
 #include "sdram-hynix-h8mbx00u0mer-0em.h"
 
-static void __init omap_zoom_map_io(void)
-{
-	omap2_set_globals_3xxx();
-	omap34xx_map_common_io();
-}
-
 static struct omap_board_config_kernel zoom_config[] __initdata = {
 };
 
@@ -76,7 +70,7 @@ MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board")
 	.phys_io	= ZOOM_UART_BASE,
 	.io_pg_offst	= (ZOOM_UART_VIRT >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
-	.map_io		= omap_zoom_map_io,
+	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
 	.init_irq	= omap_zoom_init_irq,
 	.init_machine	= omap_zoom_init,

arch/arm/plat-omap/common.c

@@ -324,6 +324,12 @@ void __init omap2_set_globals_3xxx(void)
 {
 	__omap2_set_globals(&omap3_globals);
 }
+
+void __init omap3_map_io(void)
+{
+	omap2_set_globals_3xxx();
+	omap34xx_map_common_io();
+}
 #endif
 
 #if defined(CONFIG_ARCH_OMAP4)

arch/arm/plat-omap/include/plat/common.h

@@ -68,6 +68,8 @@ void omap2_set_globals_control(struct omap_globals *);
 void omap2_set_globals_prcm(struct omap_globals *);
 void omap2_set_globals_uart(struct omap_globals *);
 
+void omap3_map_io(void);
+
 /**
  * omap_test_timeout - busy-loop, testing a condition
  * @cond: condition to test until it evaluates to true