Merge branch 'for-greg' of git://gitorious.org/usb/usb into usb-linus

* 'for-greg' of git://gitorious.org/usb/usb:
  USB: musb: blackfin: work around anomaly 05000450
  usb: musb: Fix the crash issue during reboot
  usb: musb: gadget: check the correct list_head
  usb: musb: temporarily make it bool
  USB: musb: dereferencing an iomem pointer
  USB: musb: silence printk format warning
  USB: musb: using 0 instead of NULL
  USB: musb: add missing unlock in cppi_interrupt()
  usb: musb: ux500: copy dma mask from platform device to musb device
  usb: musb: clear AUTOSET while clearing DMAENAB

drivers/usb/musb/Kconfig

@@ -14,7 +14,7 @@ config USB_MUSB_HDRC
 	select TWL4030_USB if MACH_OMAP_3430SDP
 	select TWL6030_USB if MACH_OMAP_4430SDP || MACH_OMAP4_PANDA
 	select USB_OTG_UTILS
-	tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)'
+	bool 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)'
 	help
 	  Say Y here if your system has a dual role high speed USB
 	  controller based on the Mentor Graphics silicon IP.  Then
@@ -30,8 +30,8 @@ config USB_MUSB_HDRC
 
 	  If you do not know what this is, please say N.
 
-	  To compile this driver as a module, choose M here; the
-	  module will be called "musb-hdrc".
+#	  To compile this driver as a module, choose M here; the
+#	  module will be called "musb-hdrc".
 
 choice
 	prompt "Platform Glue Layer"

drivers/usb/musb/blackfin.c

@@ -21,6 +21,7 @@
 #include <asm/cacheflush.h>
 
 #include "musb_core.h"
+#include "musbhsdma.h"
 #include "blackfin.h"
 
 struct bfin_glue {
@@ -332,6 +333,27 @@ static int bfin_musb_set_mode(struct musb *musb, u8 musb_mode)
 	return -EIO;
 }
 
+static int bfin_musb_adjust_channel_params(struct dma_channel *channel,
+				u16 packet_sz, u8 *mode,
+				dma_addr_t *dma_addr, u32 *len)
+{
+	struct musb_dma_channel *musb_channel = channel->private_data;
+
+	/*
+	 * Anomaly 05000450 might cause data corruption when using DMA
+	 * MODE 1 transmits with short packet.  So to work around this,
+	 * we truncate all MODE 1 transfers down to a multiple of the
+	 * max packet size, and then do the last short packet transfer
+	 * (if there is any) using MODE 0.
+	 */
+	if (ANOMALY_05000450) {
+		if (musb_channel->transmit && *mode == 1)
+			*len = *len - (*len % packet_sz);
+	}
+
+	return 0;
+}
+
 static void bfin_musb_reg_init(struct musb *musb)
 {
 	if (ANOMALY_05000346) {
@@ -430,6 +452,8 @@ static const struct musb_platform_ops bfin_ops = {
 
 	.vbus_status	= bfin_musb_vbus_status,
 	.set_vbus	= bfin_musb_set_vbus,
+
+	.adjust_channel_params = bfin_musb_adjust_channel_params,
 };
 
 static u64 bfin_dmamask = DMA_BIT_MASK(32);

drivers/usb/musb/cppi_dma.c

@@ -597,12 +597,12 @@ cppi_next_tx_segment(struct musb *musb, struct cppi_channel *tx)
 		length = min(n_bds * maxpacket, length);
 	}
 
-	DBG(4, "TX DMA%d, pktSz %d %s bds %d dma 0x%x len %u\n",
+	DBG(4, "TX DMA%d, pktSz %d %s bds %d dma 0x%llx len %u\n",
 			tx->index,
 			maxpacket,
 			rndis ? "rndis" : "transparent",
 			n_bds,
-			addr, length);
+			(unsigned long long)addr, length);
 
 	cppi_rndis_update(tx, 0, musb->ctrl_base, rndis);
 
@@ -820,7 +820,7 @@ cppi_next_rx_segment(struct musb *musb, struct cppi_channel *rx, int onepacket)
 	length = min(n_bds * maxpacket, length);
 
 	DBG(4, "RX DMA%d seg, maxp %d %s bds %d (cnt %d) "
-			"dma 0x%x len %u %u/%u\n",
+			"dma 0x%llx len %u %u/%u\n",
 			rx->index, maxpacket,
 			onepacket
 				? (is_rndis ? "rndis" : "onepacket")
@@ -829,7 +829,8 @@ cppi_next_rx_segment(struct musb *musb, struct cppi_channel *rx, int onepacket)
 			musb_readl(tibase,
 				DAVINCI_RXCPPI_BUFCNT0_REG + (rx->index * 4))
 					& 0xffff,
-			addr, length, rx->channel.actual_len, rx->buf_len);
+			(unsigned long long)addr, length,
+			rx->channel.actual_len, rx->buf_len);
 
 	/* only queue one segment at a time, since the hardware prevents
 	 * correct queue shutdown after unexpected short packets
@@ -1039,9 +1040,9 @@ static bool cppi_rx_scan(struct cppi *cppi, unsigned ch)
 		if (!completed && (bd->hw_options & CPPI_OWN_SET))
 			break;
 
-		DBG(5, "C/RXBD %08x: nxt %08x buf %08x "
+		DBG(5, "C/RXBD %llx: nxt %08x buf %08x "
 			"off.len %08x opt.len %08x (%d)\n",
-			bd->dma, bd->hw_next, bd->hw_bufp,
+			(unsigned long long)bd->dma, bd->hw_next, bd->hw_bufp,
 			bd->hw_off_len, bd->hw_options,
 			rx->channel.actual_len);
 
@@ -1111,11 +1112,12 @@ static bool cppi_rx_scan(struct cppi *cppi, unsigned ch)
 		musb_ep_select(cppi->mregs, rx->index + 1);
 		csr = musb_readw(regs, MUSB_RXCSR);
 		if (csr & MUSB_RXCSR_DMAENAB) {
-			DBG(4, "list%d %p/%p, last %08x%s, csr %04x\n",
+			DBG(4, "list%d %p/%p, last %llx%s, csr %04x\n",
 				rx->index,
 				rx->head, rx->tail,
 				rx->last_processed
-					? rx->last_processed->dma
+					? (unsigned long long)
+						rx->last_processed->dma
 					: 0,
 				completed ? ", completed" : "",
 				csr);
@@ -1167,8 +1169,11 @@ irqreturn_t cppi_interrupt(int irq, void *dev_id)
 	tx = musb_readl(tibase, DAVINCI_TXCPPI_MASKED_REG);
 	rx = musb_readl(tibase, DAVINCI_RXCPPI_MASKED_REG);
 
-	if (!tx && !rx)
+	if (!tx && !rx) {
+		if (cppi->irq)
+			spin_unlock_irqrestore(&musb->lock, flags);
 		return IRQ_NONE;
+	}
 
 	DBG(4, "CPPI IRQ Tx%x Rx%x\n", tx, rx);
 
@@ -1199,7 +1204,7 @@ irqreturn_t cppi_interrupt(int irq, void *dev_id)
 		 */
 		if (NULL == bd) {
 			DBG(1, "null BD\n");
-			tx_ram->tx_complete = 0;
+			musb_writel(&tx_ram->tx_complete, 0, 0);
 			continue;
 		}
 
@@ -1452,7 +1457,7 @@ static int cppi_channel_abort(struct dma_channel *channel)
 		 *    compare mode by writing 1 to the tx_complete register.
 		 */
 		cppi_reset_tx(tx_ram, 1);
-		cppi_ch->head = 0;
+		cppi_ch->head = NULL;
 		musb_writel(&tx_ram->tx_complete, 0, 1);
 		cppi_dump_tx(5, cppi_ch, " (done teardown)");
 

drivers/usb/musb/musb_core.c

@@ -1030,6 +1030,7 @@ static void musb_shutdown(struct platform_device *pdev)
 	struct musb	*musb = dev_to_musb(&pdev->dev);
 	unsigned long	flags;
 
+	pm_runtime_get_sync(musb->controller);
 	spin_lock_irqsave(&musb->lock, flags);
 	musb_platform_disable(musb);
 	musb_generic_disable(musb);
@@ -1040,6 +1041,7 @@ static void musb_shutdown(struct platform_device *pdev)
 	musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
 	musb_platform_exit(musb);
 
+	pm_runtime_put(musb->controller);
 	/* FIXME power down */
 }
 

drivers/usb/musb/musb_core.h

@@ -261,6 +261,7 @@ enum musb_g_ep0_state {
  * @try_ilde:	tries to idle the IP
  * @vbus_status: returns vbus status if possible
  * @set_vbus:	forces vbus status
+ * @channel_program: pre check for standard dma channel_program func
  */
 struct musb_platform_ops {
 	int	(*init)(struct musb *musb);
@@ -274,6 +275,10 @@ struct musb_platform_ops {
 
 	int	(*vbus_status)(struct musb *musb);
 	void	(*set_vbus)(struct musb *musb, int on);
+
+	int	(*adjust_channel_params)(struct dma_channel *channel,
+				u16 packet_sz, u8 *mode,
+				dma_addr_t *dma_addr, u32 *len);
 };
 
 /*

drivers/usb/musb/musb_gadget.c

@@ -535,7 +535,7 @@ void musb_g_tx(struct musb *musb, u8 epnum)
 			is_dma = 1;
 			csr |= MUSB_TXCSR_P_WZC_BITS;
 			csr &= ~(MUSB_TXCSR_DMAENAB | MUSB_TXCSR_P_UNDERRUN |
-				 MUSB_TXCSR_TXPKTRDY);
+				 MUSB_TXCSR_TXPKTRDY | MUSB_TXCSR_AUTOSET);
 			musb_writew(epio, MUSB_TXCSR, csr);
 			/* Ensure writebuffer is empty. */
 			csr = musb_readw(epio, MUSB_TXCSR);
@@ -1296,7 +1296,7 @@ static int musb_gadget_dequeue(struct usb_ep *ep, struct usb_request *request)
 	}
 
 	/* if the hardware doesn't have the request, easy ... */
-	if (musb_ep->req_list.next != &request->list || musb_ep->busy)
+	if (musb_ep->req_list.next != &req->list || musb_ep->busy)
 		musb_g_giveback(musb_ep, request, -ECONNRESET);
 
 	/* ... else abort the dma transfer ... */

drivers/usb/musb/musbhsdma.c

@@ -169,6 +169,14 @@ static int dma_channel_program(struct dma_channel *channel,
 	BUG_ON(channel->status == MUSB_DMA_STATUS_UNKNOWN ||
 		channel->status == MUSB_DMA_STATUS_BUSY);
 
+	/* Let targets check/tweak the arguments */
+	if (musb->ops->adjust_channel_params) {
+		int ret = musb->ops->adjust_channel_params(channel,
+			packet_sz, &mode, &dma_addr, &len);
+		if (ret)
+			return ret;
+	}
+
 	/*
 	 * The DMA engine in RTL1.8 and above cannot handle
 	 * DMA addresses that are not aligned to a 4 byte boundary.

drivers/usb/musb/ux500.c

@@ -93,6 +93,8 @@ static int __init ux500_probe(struct platform_device *pdev)
 	}
 
 	musb->dev.parent		= &pdev->dev;
+	musb->dev.dma_mask		= pdev->dev.dma_mask;
+	musb->dev.coherent_dma_mask	= pdev->dev.coherent_dma_mask;
 
 	glue->dev			= &pdev->dev;
 	glue->musb			= musb;